73dd1a8230
Organized my mods a little better and added 2-piece Z tensioners for the 2.4 |
||
|---|---|---|
| .. | ||
| README.md | ||
| V0.1-A_Drive_Frame_Lower_x1.stl | ||
| V0.1-A_Drive_Frame_Upper_x1.stl | ||
| V0.1-B_Drive_Frame_Lower_x1.stl | ||
| V0.1-B_Drive_Frame_Upper_x1.stl | ||
| [a]_V0.1-A_Drive_Cap_x1.stl | ||
| [a]_V0.1-A_Drive_Frame_Middle_x1.stl | ||
| [a]_V0.1-B_Drive_Cap_x1.stl | ||
| [a]_V0.1-B_Drive_Frame_Middle_x1.stl | ||
| [a]_V0.1-Lower_Corner_Rear_Left_x1.stl | ||
| [a]_V0.1-Lower_Corner_Rear_Right_x1.stl | ||
README.md
BOM
| QTY | Part | Comments |
|---|---|---|
| 8 | M3x8 BHCS | 2 of these can be reused from the stock top hat lower corners |
| 2 | M3x10 BHCS | You can reuse these from the stock motor mounts |
| 12 | M3x25 BHCS | |
| 4 | M3x35 BHCS | You can reuse these from the stock motor mounts |
| 8 | M3 Hex Nut | You can reuse these from the stock motor mounts |
| 8 | M3 Threaded Insert |