VoronUsers/printer_mods/Long/Mantis_Dual_5015/STLs

What to Print

**note that Voron 1.8 is only compatible with Dragon hotend at the moment. If you need something else just let me know and I'll work with you.

Hotend	Parts	Notes
Dragon (2.4 and Trident)	Hotend_Mount_Dragon_v1.040.stl -or- Hotend_Mount_Dragon_v1.040_sherpa_brace.stl duct_dragon_v1.041_left.stl duct_dragon_v1.041_right.stl -or- duct_dragon_v1.043e_left.stl duct_dragon_v1.043e_right.stl Magprobe_v0.31_Dragon.stl	Hotend_Mount_Dragon_v1.040_sherpa_brace.stl allows usage of modified sherpa mini housing_front, which triangulates the sherpa mini mounting and adds extra stability. Duct v1.041 is the standard duct. It has good build plate clearance and plenty of airflow. Duct v1.043e has less slightly less build plate clearance, but has larger duct outlets and higher cooling potential.
Dragon (Voron 1.8)	Hotend_Mount_Dragon_v1.040.stl -or- Hotend_Mount_Dragon_v1.040_sherpa_brace.stl Duct_v1.037_Left_+2mm.stl Duct_v1.037_Right_+2mm.stl Magprobe_v0.31_Dragon.stl	Note, because Voron 1.8 has an inverted gantry, the rear ear of the 5015 fans must be cut off. Some people have reported being able to use the standard v2.4 ducts with a very very close clearance. The Full duct brace will not work with the +2mm versions. Hotend_Mount_Dragon_v1.040_sherpa_brace.stl allows usage of modified sherpa mini housing_front, which triangulates the sherpa mini mounting and adds extra stability.
Mosquito	hotend_mount_mosquito_30mm_fan_v0.42 duct_dragon_v1.041_left.stl duct_dragon_v1.041_right.stl -or- duct_dragon_v1.043e_left.stl duct_dragon_v1.043e_right.stl Magprobe_v0.31_Dragon.stl	The hotend mount is located in usermods Thanks to Wingzero for making Mosquito Compatible! Duct v1.041 is the standard duct. It has good build plate clearance and plenty of airflow. Duct v1.043e has less slightly less build plate clearance, but has larger duct outlets and higher cooling potential.
Crazy Volcano with Dragon Heatsink	Hotend_Mount_Dragon_v1.040.stl -or- Hotend_Mount_Dragon_v1.040_sherpa_brace.stl duct_dragon_crazy_volcano_v1.0_left.stl duct_dragon_crazy_volcano_v1.0_right.stl Magprobe_v0.31_RapidoHF_and_CrazyVolcano.stl	Hotend_Mount_Dragon_v1.040_sherpa_brace.stl allows usage of modified sherpa mini housing_front, which triangulates the sherpa mini mounting and adds extra stability.
Rapido HF	Hotend_Mount_Rapido_v.03.stl duct_rapido_HF_v0.03b_left.stl duct_rapido_HF_v0.03b_right.stl Magprobe_v0.31_RapidoHF_and_CrazyVolcano.stl	Print the hotend mount (Hotend_Mount_Rapido_v.03.stl or Hotend_Mount_Rapido_v.03_Rotated120Degrees.stl) that allows you to mount the Rapido hotend so that the wires come out right/forward and the logo of the sock faces directly forward. Because the Rapido uses FOUR screws on the top of the heatsink, and THREE screws to mount the heater to the heatsink, the orientation of the hotend mount versus the heater wire can vary. The Part cooling ducts for Rapido have been optimized so that the Phaetus logo on the sock should point directly forward (yes the sock is asymmetrical).
Rapido UHF	Hotend_Mount_Rapido_v.03.stl duct_rapido_UHF_v0.03b_left.stl duct_rapido_UHF_v0.03b_right.stl Magprobe_v0.31_RapidoUHF.stl	See the RapidoHF notes on which hotend mount to print. Don't forget you will need to switch between magprobes if you switch between UHF and HF variant of the Rapido.

The Rest

• Carriage
  • Carriage_MGN12_v1.040.stl
  • Carriage_MGN9_v1.0.stl
• Cable/Umbilical Chain
  • Cable Chain Mounts
    • IGUS - Chain_Anchor_v3.1_IGUS.stl
    • China - Chain_Anchor_v3.2.stl
  • Umbilical Mount - Umbilical_Mount_v2.stl
  • Also see the usermods for other potential options.
• Duct braces can be used to improve stability of the 5015 mounting arms. This will help with resonance compensation. See the Duct Brace Folder
• Gantry or bed extrusion mag probe dock.
  • Gantry
    • Magprobe_Gantry_Extrusion_Mount_by_JosAr_v1.stl
    • Magprobe_Gantry_Dock_Mount_by_JosAr_v1.stl
    • Dock arms (I recommend the single magnet unless you have issues with your probe falling out during prints)
      • Magprobe_Gantry_Dock_Arm_v1.5_Single_magnet.stl
      • Magprobe_Gantry_Dock_Arm_v1.5_double_magnet.stl
  • Bed Extrusion
    • Magprobe_Dock_Arms_v1.5.stl
    • Magprobe_Dock_Mount_v1.0.stl