3274 lines
122 KiB
JSON
3274 lines
122 KiB
JSON
[
|
|
{
|
|
"path": "1-0-R/handle",
|
|
"title": "V2.4 handle",
|
|
"creator": "1-0-R",
|
|
"description": "Handle for Voron 2.4",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "120decibell/exhaust_housing_side_entry",
|
|
"title": "Side entry exhaust housing",
|
|
"creator": "120decibell",
|
|
"description": "Exhaust housing with dual cover screws and single or dual side...",
|
|
"printer_compatibility": "V1.8, V2.4, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "120decibell/huvud_chain_mount",
|
|
"title": "Huvud Chain Mount",
|
|
"creator": "120decibell",
|
|
"description": "Huvud rear mount for Clockwork or LGX that supports a cable chain.",
|
|
"printer_compatibility": "V1.8, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "3dpandme/Fannypack_zero",
|
|
"title": "FANnypack zero",
|
|
"creator": "3dpandme",
|
|
"description": "Electronics cooling solution for Voron Zero",
|
|
"printer_compatibility": "V0.2, VSW, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "3dpandme/Thermistor_holder_zero",
|
|
"title": "Thermistor holder zero",
|
|
"creator": "3dpandme",
|
|
"description": "Extended thermistor holder for Voron Zero",
|
|
"printer_compatibility": "V0.2, VSW, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "3vilson/V0.1_Skirt_Holes",
|
|
"title": "V0.1_Skirt_Holes",
|
|
"creator": "3vilson",
|
|
"description": "Skirt with Access Holes from the bottom",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "3vilson/V0.1_Skirt_Inlet",
|
|
"title": "V0.1_Skirt_Inlet",
|
|
"creator": "3vilson",
|
|
"description": "Skirt with C14 inlet + New feet to screw into",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "42bios/LED_mount",
|
|
"title": "LED mount",
|
|
"creator": "42bios",
|
|
"description": "AngryLED - LED-mount for Lumentech LT3 profiles.",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "42bios/corner_panel_clip_cable",
|
|
"title": "Corner panel clip w. cable",
|
|
"creator": "42bios",
|
|
"description": "Corner panel clip with an internal cable path.",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "42bios/exhaust_filter_housing_side",
|
|
"title": "Exhaust filter housing - side...",
|
|
"creator": "42bios",
|
|
"description": "Exhaust filter housing with the G1-8 \"thread on the side.",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "42bios/relay_mount",
|
|
"title": "relay mount",
|
|
"creator": "42bios",
|
|
"description": "relay-mount for 2x 2 channel relay modules.",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Akio/cable_routing_z_belt_cover",
|
|
"title": "Hidden cable routing z belt cover",
|
|
"creator": "Akio",
|
|
"description": "Z belt covers that allow hidden cable routing.",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "AlexanderT-Moss/270-Clamping-Hinges",
|
|
"title": "270 Clamping Hinges",
|
|
"creator": "AlexanderT-Moss",
|
|
"description": "Simple 270 degree hinges that clamp to the front panels instead of...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Andre/Mini_Afterburner_ADXL345_Mount",
|
|
"title": "Mini Afterburner ADXL345 Mount",
|
|
"creator": "Andre",
|
|
"description": "Mount for an AXDL345 on the Mini Afterburner",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Andre/Mini_Afterburner_Strain_Relief",
|
|
"title": "Mini Afterburner Strain Relief",
|
|
"creator": "Andre",
|
|
"description": "A replacement strain relief for the Mini Afterburner toolhead",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Andre/Revo_Nozzle_Skirt_Trident",
|
|
"title": "Revo Nozzle Skirt",
|
|
"creator": "Andre",
|
|
"description": "A Revo nozzle box hidden in a Trident skirt.",
|
|
"printer_compatibility": "VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Andre/V0_Neopixel_Front_Bed_Mount",
|
|
"title": "V0 Neopixel Front Bed Mount",
|
|
"creator": "Andre",
|
|
"description": "A replacement Front Bed Mount with room for a neopixel or dotstar...",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Backenfutter/Mount_for_Electreeks_Camera",
|
|
"title": "Mount for Electreeks Camera",
|
|
"creator": "Backenfutter",
|
|
"description": "This Mod is a simple \"One Piece\" mount for the popular Electreeks...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Badnoob/AB-BN",
|
|
"title": "AB-BN Afterburner mod (5015)",
|
|
"creator": "Badnoob",
|
|
"description": "Improved Afterburner with 5015 fan",
|
|
"printer_compatibility": "V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Badnoob/ABBN_for_Stock",
|
|
"title": "AB-BN for Stock Afterburner (4020)",
|
|
"creator": "Badnoob",
|
|
"description": "Improved Dragon and Rapido toolhead for stock Afterburner with 4020...",
|
|
"printer_compatibility": "V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Badnoob/Precision_AB_Drive",
|
|
"title": "Precision AB Drive",
|
|
"creator": "Badnoob",
|
|
"description": "Changes the gearing for the AB drives to improve both resolution...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Badnoob/Rail_Alignment",
|
|
"title": "Rail Alignment",
|
|
"creator": "Badnoob",
|
|
"description": "Tools and procedure to properly align the rails in 2.4 and Afterburner",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Baltojikale/LoudOwl_aka_Stabby",
|
|
"title": "LoudOwl aka Stabby",
|
|
"creator": "Baltojikale",
|
|
"description": "Alternative dual 5015 part cooling fan toolhead for Afterburner",
|
|
"printer_compatibility": "V1.8, V2.4, VSW",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "BladeScraper-Designs/CornerPanel_SpoolHolder",
|
|
"title": "CornerPanel_SpoolHolder",
|
|
"creator": "BladeScraper-Designs",
|
|
"description": "A better supported Spool Holder that mounts to a modified corner...",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "BladeScraper-Designs/Horizontal-Spool-Holder",
|
|
"title": "Horizontal Spool Holder",
|
|
"creator": "BladeScraper-Designs",
|
|
"description": "Based on the stock holder but mounts to the horizontal extrusions.",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "BladeScraper-Designs/Microswitch_Pod_With_Conector",
|
|
"title": "Microswitch Pod With Connector",
|
|
"creator": "BladeScraper-Designs",
|
|
"description": "Microswitch pod with JST-XH 4-pin connector",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Blamm/lrs-100",
|
|
"title": "LRS-100 DIN mount",
|
|
"creator": "Blamm",
|
|
"description": "DIN rail mount for an extra LRS-100 Power Supply",
|
|
"printer_compatibility": "V1.8, V2.4, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "BlueBear/Bowden_Fence",
|
|
"title": "Bowden Fence",
|
|
"creator": "BlueBear",
|
|
"description": "A little \"fence\" to hold the tubes away from the belts.",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "BlueBear/Deck_Panel_Backpack",
|
|
"title": "Deck Panel Backpack",
|
|
"creator": "BlueBear",
|
|
"description": "A mounting alternative if you don't want to drill your deck panel",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "BlueBear/Wago_221_mount",
|
|
"title": "Clippable Wago 221 Mounts",
|
|
"creator": "BlueBear",
|
|
"description": "Mounts for Wago 221 to screw or clip-in on 1515 extrusions",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "BlueBear/Ziptie_Mount",
|
|
"title": "Ziptie Mount",
|
|
"creator": "BlueBear",
|
|
"description": "Clippable Ziptie hooks for 1515 extrusions",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Boingomw/Wago_mount",
|
|
"title": "Wago mount",
|
|
"creator": "Boingomw",
|
|
"description": "Smaller 5 port Wago mount that fits parallel to the support rails",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Bondtech/Mini-After-LGX-Lite",
|
|
"title": "Mini-After-LGX-Lite",
|
|
"creator": "Bondtech",
|
|
"description": "LGX Lite Toolhead Setup For Voron V0.1.",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "ByteChild/2_Channel_Relay_DIN_Rail_Bracket",
|
|
"title": "2-Channel Relay DIN Rail Bracket",
|
|
"creator": "ByteChild",
|
|
"description": "DIN Rail mounting bracket for an 2-Channel-Relay",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "ByteChild/ESP32_DIN_Rail_Bracket",
|
|
"title": "ESP32 DIN Rail Bracket",
|
|
"creator": "ByteChild",
|
|
"description": "DIN rail mounting bracket for an ESP32",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "CannedBass/PITFT50_45_degree_mount",
|
|
"title": "PITFT50 45-degree mount",
|
|
"creator": "CannedBass",
|
|
"description": "Mount that puts the screen at a 45-degree angle for more vertical...",
|
|
"printer_compatibility": "V2.4, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "CannedBass/Trident_Bed_Fans",
|
|
"title": "Trident Bed Fans",
|
|
"creator": "CannedBass",
|
|
"description": "Bed fans for Trident",
|
|
"printer_compatibility": "VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Ch4rlesB/V0_Handles_Slim",
|
|
"title": "V0 Handles Slim",
|
|
"creator": "Ch4rlesB",
|
|
"description": "Simple and slim handles for the V0",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Chaoticlab/Tool_free_tensioner",
|
|
"title": "Tool_free_tensioner",
|
|
"creator": "Chaoticlab",
|
|
"description": "Tool-free tensioner for Z-Axis",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "ChenTheDesignMaker/Z_Belt_Clip",
|
|
"title": "Z Belt Clip",
|
|
"creator": "ChenTheDesignMaker",
|
|
"description": "Simple clip to keep extra Z belts clean and away from panels",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "D4rkCelerity/Raspberry_Pi_Zero_Bracket",
|
|
"title": "Raspberry Pi Zero Bracket",
|
|
"creator": "D4rkCelerity",
|
|
"description": "Modified version of Trident RPi bracket to fit the smaller RPi Zero",
|
|
"printer_compatibility": "V0.2, V1.8, V2.4, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "DC67/plug_panel_schaffner",
|
|
"title": "Plug Panel Mod for Schaffner...",
|
|
"creator": "DC67",
|
|
"description": "A modified plug panel for the Power Entry Connector Schaffner...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "DaGlo/Voron_V0_Duet_2_WiFi_Mounting_Brackets",
|
|
"title": "V0.1 Duet 2 Wifi mounting brackets",
|
|
"creator": "DaGlo",
|
|
"description": "Voron 0.1 Mounting brackets with/without RPi 4",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "DaGlo/Voron_V0_MW_PS_Bracket",
|
|
"title": "Voron V0 Mean Well power supply...",
|
|
"creator": "DaGlo",
|
|
"description": "Voron V0 Mean Well power supply bracket (Funssor Kit)",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "DaGlo/Voron_V0_SSR_Mount",
|
|
"title": "Voron V0 SSR Mount",
|
|
"creator": "DaGlo",
|
|
"description": "Voron V0 SSR Mount for the bottom",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "DaGrooch13/Tophat_Exhaust_Filter",
|
|
"title": "Tophat Exhaust Filter V0",
|
|
"creator": "DaGrooch13",
|
|
"description": "Activated charcoal exhaust filter with HEPA that replaces the rear...",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "DaStivi/the_Cephalopods_limb",
|
|
"title": "The Cephalopod limb (BTT Octopus...",
|
|
"creator": "DaStivi",
|
|
"description": "An alternative Din rail mount for BTT Octopus (PRO) boards",
|
|
"printer_compatibility": "V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Dan88/V0skirt",
|
|
"title": "V0 one-part Skirts",
|
|
"creator": "Dan88",
|
|
"description": "One part Skirts for the V0",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Daten/Voron_2.4_Revo_Nozzle_Holder",
|
|
"title": "Revo hotend skirt case",
|
|
"creator": "Daten",
|
|
"description": "A skirt case for the Revo hotends to reside R1 and R2",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "DerekBackus/LED_Holder",
|
|
"title": "LED Strip Holder",
|
|
"creator": "DerekBackus",
|
|
"description": "Simple bracket to mount an LED strip",
|
|
"printer_compatibility": "",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "DerekBackus/Right_Skirt_Switch",
|
|
"title": "Trident Right Skirt Switch",
|
|
"creator": "DerekBackus",
|
|
"description": "Moves power switch to right front skirt on the Trident",
|
|
"printer_compatibility": "",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Derpimus/Block_handle_v0.1",
|
|
"title": "V0.1 Block Handle",
|
|
"creator": "Derpimus",
|
|
"description": "V0.1 Block Style Handle",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "DorjeDorf/Duet_3_3HC_Din_Bracket",
|
|
"title": "Duet 3 3HC Din Bracket",
|
|
"creator": "DorjeDorf",
|
|
"description": "V2.4 Duet 3 3HC Din Bracket",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "DorjeDorf/Duet_3_6HC_Din_Bracket",
|
|
"title": "Duet 3 6HC Din Bracket",
|
|
"creator": "DorjeDorf",
|
|
"description": "V2.4 Duet 3 6HC Din Bracket",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Dr-Info/V2.4r2_Z-Drive_Motor_Tensioner_Mod_Rear_Skirts",
|
|
"title": "V2.4 Rear Skirt Mod for Z-Drive...",
|
|
"creator": "Dr-Info",
|
|
"description": "This mod enables the you to utilize the rear skirts, power and...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Dr-Info/corner_cable_cover_with_drop_down_holes",
|
|
"title": "Corner Cable Cover with Drop Holes",
|
|
"creator": "Dr-Info",
|
|
"description": "Corner cable cover around Z-idler with drop holes near z frame and...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "DrGhetto/GhettoPanels",
|
|
"title": "Ghetto Panels",
|
|
"creator": "DrGhetto",
|
|
"description": "Printed panels for the Voron Zero",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "ElPoPo/RemovableDoors",
|
|
"title": "Removable Doors",
|
|
"creator": "ElPoPo",
|
|
"description": "New hinge to easily remove the door and have a wide opening V2.x",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Electroleon/U2C_Mounting",
|
|
"title": "U2C Mounting",
|
|
"creator": "Electroleon",
|
|
"description": "Bigtreetech U2C CAN Interface mounting bracket",
|
|
"printer_compatibility": "V0.2, V1.8, V2.4, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Ellis/15x15_Drag_Chain_End",
|
|
"title": "15x15 Drag Chain End",
|
|
"creator": "Ellis",
|
|
"description": "15x15 drag chain end piece",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Ellis/Badge_Retractor_Mount",
|
|
"title": "Badge Retractor Mount",
|
|
"creator": "Ellis",
|
|
"description": "Extrusion mount for badge retractor to keep bowden tube out of the...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Ellis/Bed_Fans",
|
|
"title": "Bed Fans",
|
|
"creator": "Ellis",
|
|
"description": "Bed fan control macros and 5015 bed fan mounts",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Ellis/Short_Z_Joints",
|
|
"title": "Short Z Joints",
|
|
"creator": "Ellis",
|
|
"description": "Shorter Z joints for the v2.4",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Ellis/Single_MGN9H_Carriage",
|
|
"title": "Single MGN9H Carriage",
|
|
"creator": "Ellis",
|
|
"description": "Single MGN9H toolhead carriage with toolhead x endstop support (for...",
|
|
"printer_compatibility": "V1.8, V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Empusas/BTT_Filament_Motion_Sensor_Mount",
|
|
"title": "Mounts for BTT Filament Motion...",
|
|
"creator": "Empusas",
|
|
"description": "Mounts for Big Tree Tech Smart Filament Motion Sensor",
|
|
"printer_compatibility": "V0.2, V1.8, V2.4, VSW",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Empusas/PowerSkirt_FN284-10-06",
|
|
"title": "Power Skirt 2.x FN284-10-06",
|
|
"creator": "Empusas",
|
|
"description": "Power Skirt for Schaffner FN284-10-06 V2.x",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Empusas/Terminal_Blocks_NC933_SPL-62",
|
|
"title": "Mounts for Terminal Blocks NC933...",
|
|
"creator": "Empusas",
|
|
"description": "Mounts for Terminal Blocks NC933 and SPL-62 from AliExpress",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Fiction/C270_mount",
|
|
"title": "C270 mount",
|
|
"creator": "Fiction",
|
|
"description": "Logitech C270 webcam front-centre mount",
|
|
"printer_compatibility": "V2.4, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Fiction/Crossrail",
|
|
"title": "Crossrail",
|
|
"creator": "Fiction",
|
|
"description": "Across-the-rails LRS-200-24 or RSP-200-24 mount using DRP-03 brackets",
|
|
"printer_compatibility": "V2.4, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Fiction/Exhaust_cover",
|
|
"title": "Exhaust_cover",
|
|
"creator": "Fiction",
|
|
"description": "Cover for exhaust cutout in back panel",
|
|
"printer_compatibility": "V2.4, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Fiction/Exhaust_cover_SFS",
|
|
"title": "Exhaust_cover_SFS",
|
|
"creator": "Fiction",
|
|
"description": "Exhaust cover and BTT Smart Filament Sensor mount",
|
|
"printer_compatibility": "V2.4, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Fiction/LGX_Lite_toolhead_PCB_mount",
|
|
"title": "LGX Lite toolhead PCB mount",
|
|
"creator": "Fiction",
|
|
"description": "Mount for Hartk's toolhead PCB(s) for LGX Lite",
|
|
"printer_compatibility": "V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "FreeformFez/FilteredPower",
|
|
"title": "V1.8 Filtered Power Inlet",
|
|
"creator": "FreeformFez",
|
|
"description": "V1.6 Filtered Inlet and Rocker Switch for V1.8",
|
|
"printer_compatibility": "V1.8",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "GSL12/pocketwatch_nema17",
|
|
"title": "Pocketwatch Nema 17",
|
|
"creator": "GSL12",
|
|
"description": "Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe...",
|
|
"printer_compatibility": "",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "GadgetAngel/Bed_Support_Alignment_Tools",
|
|
"title": "Bed Support Extrusions Alignment...",
|
|
"creator": "GadgetAngel",
|
|
"description": "The bed support alignment tools will assist in helping align the...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "GadgetAngel/Cricut_Voron_Logos",
|
|
"title": "Cricut Voron Logos",
|
|
"creator": "GadgetAngel",
|
|
"description": "For any cutting machines or machines that rely on vector graphics...",
|
|
"printer_compatibility": "V0.2, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Galvanic/Bowden_Tube_Guide",
|
|
"title": "Bowden Tube Guide",
|
|
"creator": "Galvanic",
|
|
"description": "Bowden tube guide and CANBUS wire support",
|
|
"printer_compatibility": "V1.8, V2.4, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "GiulianoM/FlyF407ZG",
|
|
"title": "Fly F407ZG Mount",
|
|
"creator": "GiulianoM",
|
|
"description": "Mount for the Fly F407ZG: https://github.com/FLYmaker/FLYF407ZG",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Gizzle/ender-3_pro_switchwire",
|
|
"title": "Ender 3 and Ender 3 Pro...",
|
|
"creator": "Gizzle",
|
|
"description": "Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics...",
|
|
"printer_compatibility": "VSW",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Hobson318/Belt_Tension_Wrench",
|
|
"title": "Belt Tension Wrench",
|
|
"creator": "Hobson318",
|
|
"description": "Wrench for easier turning of the belt tension knobs on V0.1",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Hobson318/Klipper_Expander_Mount",
|
|
"title": "Klipper Expander Mount",
|
|
"creator": "Hobson318",
|
|
"description": "Mounting brackets for the klipper expander using vhb tape or...",
|
|
"printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Iakabos/C920_mount",
|
|
"title": "c920 Mount",
|
|
"creator": "Iakabos",
|
|
"description": "Slim mount for logitech c920 webcam",
|
|
"printer_compatibility": "V1.8, V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Iakabos/V0_beltchain",
|
|
"title": "V0 beltchains",
|
|
"creator": "Iakabos",
|
|
"description": "Modified beltchain parts for V0 Z cables",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "JD/RefillPlease",
|
|
"title": "V2.4 Filament runout sensor",
|
|
"creator": "JD",
|
|
"description": "Replace the 2.4 stock bowden tube holder and add a filament runout...",
|
|
"printer_compatibility": "V1.8, V2.4, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "JJFX/CRTouch_Snap_Mount",
|
|
"title": "V2.4 CR Touch Snap Mount",
|
|
"creator": "JJFX",
|
|
"description": "Mount to replace v2.4 (MGN9) probe with a Creality CR Touch",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "JNP/Back-Door",
|
|
"title": "Back Door",
|
|
"creator": "JNP",
|
|
"description": "Door for easy hardware access",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "JNP/Deck_Panel_Rear",
|
|
"title": "Deck Panel",
|
|
"creator": "JNP",
|
|
"description": "Covers the hotbed cables",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "JNP/Drawer",
|
|
"title": "Drawer",
|
|
"creator": "JNP",
|
|
"description": "Drawer in four different versions",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "JNP/Front-Door",
|
|
"title": "Front Door",
|
|
"creator": "JNP",
|
|
"description": "Door in a frame",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "JNP/HEPA-Filter",
|
|
"title": "Hepa Filter",
|
|
"creator": "JNP",
|
|
"description": "Filter case with fan\u00b4s",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "JNP/Mid-Panel",
|
|
"title": "Mid Panel",
|
|
"creator": "JNP",
|
|
"description": "Panel for SKR1.4/1.4 or SKR E3 mini mount",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "JNP/Neopixel-Y_Rails",
|
|
"title": "Neopixel Case",
|
|
"creator": "JNP",
|
|
"description": "mounting for Neopixel strip with 8 LED\u00b4s",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "JNP/Side-Panels",
|
|
"title": "Side Panels",
|
|
"creator": "JNP",
|
|
"description": "Panels with intergrated hinge",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Jasrags/sw_fee_slot_filament_passthrough",
|
|
"title": "Feed slot with filament pass-...",
|
|
"creator": "Jasrags",
|
|
"description": "A feed slot with a filament pass-through",
|
|
"printer_compatibility": "VSW",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "JeremyRuhland/V2.4_Plug_Panel_Generic_Combo",
|
|
"title": "V2.4 Plug Panel Generic Combo",
|
|
"creator": "JeremyRuhland",
|
|
"description": "Skirt power panel for generic amazon plug/switch/fuse combo module,...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Jon/1515_led_mount",
|
|
"title": "1515 LED Mount",
|
|
"creator": "Jon",
|
|
"description": "Snap in 1515 Led mount for WS2812B",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Jon/V0.1_Z_Cover",
|
|
"title": "Z Cover for v0.1",
|
|
"creator": "Jon",
|
|
"description": "A cover to stop things from dropping down the Z motor and...",
|
|
"printer_compatibility": "V0.1",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Jon/adxl345_skirt_keystone",
|
|
"title": "adxl345 skirt keystone",
|
|
"creator": "Jon",
|
|
"description": "Skirt keystone for ADXL345 using Microfit 3.0",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "JosAr/Klicky-Probe",
|
|
"title": "Klicky Probe",
|
|
"creator": "JosAr",
|
|
"description": "Microswitch based inductive probe replacement",
|
|
"printer_compatibility": "V0.2, V1.8, V2.4, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "KenadyDwag44/sw_lightbar",
|
|
"title": "Switchwire Lightbar",
|
|
"creator": "KenadyDwag44",
|
|
"description": "A LED lightbar for switchwire",
|
|
"printer_compatibility": "VSW",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "KevinAkaSam/VEFACH",
|
|
"title": "VEFACH",
|
|
"creator": "KevinAkaSam",
|
|
"description": "Voron Exhaust Filter Inserts for Activated Coal + Hepa",
|
|
"printer_compatibility": "V2.4, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "KiloQubit/V0_reverse_bowden_mount",
|
|
"title": "V0 Reverse Bowden Mount",
|
|
"creator": "KiloQubit",
|
|
"description": "V0 reverse bowden mount",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts",
|
|
"title": "V2.4 Z Chain Mounts for 3 Hole...",
|
|
"creator": "KiloQubit",
|
|
"description": "Z chain mounts for 3 hole generic chain",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "KiloQubit/trident_schurter_power_inlet",
|
|
"title": "Trident Schurter Inlet Skirt",
|
|
"creator": "KiloQubit",
|
|
"description": "Trident inlet skirt for mounting a Schurter DD11.0124 or similar inlet",
|
|
"printer_compatibility": "VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Koios/6mm_Glass",
|
|
"title": "6mm Tempered Glass Mod",
|
|
"creator": "Koios",
|
|
"description": "Lock levers and rests for 6mm Tempered glass panels",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Koios/C920_Mount",
|
|
"title": "C920 Low Profile Mount",
|
|
"creator": "Koios",
|
|
"description": "Low profile mount for a C920 Webcam",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Koios/LED_Mounts",
|
|
"title": "LED Bar Mounts",
|
|
"creator": "Koios",
|
|
"description": "Low profile mount for led bar lights",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Koios/V0_C920_Tophat_Mount",
|
|
"title": "V0 C920 Tophat Mount",
|
|
"creator": "Koios",
|
|
"description": "Mounting bracket for a Logitech C920 on the tophat",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Kosh42EFG/kirigami_bed_front",
|
|
"title": "Kirigami bed front",
|
|
"creator": "Kosh42EFG",
|
|
"description": "Printed bed front for kirigami folded metal bed mount with Voron logo.",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Kruppes/Closed_Bottom",
|
|
"title": "Encosed Bottom",
|
|
"creator": "Kruppes",
|
|
"description": "Modified printed parts and panel to fully enclose V0.",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Kruppes/Deck_Panel_inserts_logo",
|
|
"title": "V0 Printed Deck with inserts",
|
|
"creator": "Kruppes",
|
|
"description": "Electronics Deck Panel using brass heat inserts. Optional with...",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Kruppes/Tension_Meter",
|
|
"title": "Belt Tension Meter",
|
|
"creator": "Kruppes",
|
|
"description": "Print in place tension meter to easily tighten multiple belts to...",
|
|
"printer_compatibility": "V0.2, V1.8, V2.4, VSW",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Kyleisah/CableGator",
|
|
"title": "CableGator Cable Comb",
|
|
"creator": "Kyleisah",
|
|
"description": "A cable comb for simplifying and tidying wire harnesses for...",
|
|
"printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "LJ/Scrubby",
|
|
"title": "Scrubby",
|
|
"creator": "LJ",
|
|
"description": "Easy to use filament dust filter",
|
|
"printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Le0n/Magnetic_Panels_with_Magnet_Inserts",
|
|
"title": "Magnetic panels with Magnet Inserts",
|
|
"creator": "Le0n",
|
|
"description": "Magnetic panel mounts with magnets inserted into frame slots.",
|
|
"printer_compatibility": "V1.8, V2.4, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "LoCoCNC/3mm_tophat_panel_parts",
|
|
"title": "3mm Top Hat Panels Clips",
|
|
"creator": "LoCoCNC",
|
|
"description": "Required to use the 3mm (1/8\") thick top hat panels for V0.1",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "LoCoCNC/MGN7H_Shims",
|
|
"title": "MGN7H Shims",
|
|
"creator": "LoCoCNC",
|
|
"description": "Shims for making bearing cartridges coplanar",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "LoCoCNC/Mosquito_PTFE_Cutting_Jig",
|
|
"title": "Mosquito PTFE 15mm Tube Cutting Jig",
|
|
"creator": "LoCoCNC",
|
|
"description": "Tool to precicely cut 15mm PTFE Tube",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "LoCoCNC/Strain_Relief_w_Microfit",
|
|
"title": "Strain Relief w/ 10 Pin Microfit",
|
|
"creator": "LoCoCNC",
|
|
"description": "Strain Relief with 10 pin Microfit connector",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "LoCoCNC/ssr_strap",
|
|
"title": "SSR Mounting Strap",
|
|
"creator": "LoCoCNC",
|
|
"description": "Mounting Strap for SSR on 1515 Extrusions",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "LoCoCNC/wire_grommets",
|
|
"title": "V2.4 Bed Wiring Grommet",
|
|
"creator": "LoCoCNC",
|
|
"description": "Safely capture your bed wires thru the bottom panel",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "LoganFraser/ComboInlet",
|
|
"title": "ComboInlet",
|
|
"creator": "LoganFraser",
|
|
"description": "Skirt pieces for Trident, 2.4 and 2.4r2 for combo inlets in 2 sizes.",
|
|
"printer_compatibility": "V2.4, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "LoganFraser/HorseshoeSpoolHolder",
|
|
"title": "HorseshoeSpoolHolder",
|
|
"creator": "LoganFraser",
|
|
"description": "Horseshoe Spool Holder - mounts internally for Trident, or...",
|
|
"printer_compatibility": "V0.2, V1.8, V2.4, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "LoganFraser/PiPlate",
|
|
"title": "PiPlate",
|
|
"creator": "LoganFraser",
|
|
"description": "PiPlate - Raspberry Pi3,4 mounting plate and Skirt Mod for...",
|
|
"printer_compatibility": "V2.4, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "LoganFraser/TridentInvertedElectronics",
|
|
"title": "Trident Inverted Electronics",
|
|
"creator": "LoganFraser",
|
|
"description": "Flip the Trident electronics bay for top access.",
|
|
"printer_compatibility": "VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "LoganFraser/WagoMounts",
|
|
"title": "WagoMounts",
|
|
"creator": "LoganFraser",
|
|
"description": "Wago Mounts for Din Rail or 2020 Extrusion mounting.",
|
|
"printer_compatibility": "V2.4, VSW, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Long/Mantis_Dual_5015",
|
|
"title": "Mantis Dual 5015 Toolhead",
|
|
"creator": "Long",
|
|
"description": "MGN12 Dual 5015 Toolhead for 2.4 & 1.8",
|
|
"printer_compatibility": "V1.8, V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Lukas/SSD1306_Case_Front_Cover",
|
|
"title": "SSD1306 Case Front Cover",
|
|
"creator": "Lukas",
|
|
"description": "SSD1306 Mount replacement for Mini12864",
|
|
"printer_compatibility": "V2.4, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "MCMBen/Voron0_Block_and_Tackle_Z_Belt",
|
|
"title": "Voron0 Block & Tackle Z Belt",
|
|
"creator": "MCMBen",
|
|
"description": "A block & tackle belted Z solution using NEMA14. Ratios from 5:1 to...",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "MSA/V0-Belt-tension-helper",
|
|
"title": "Belt tension helper",
|
|
"creator": "MSA",
|
|
"description": "Belt tension helper for V0.1",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "MSiemons/TophatHingeV0.1",
|
|
"title": "Tophat Hinge V0",
|
|
"creator": "MSiemons",
|
|
"description": "Simple hinge for V0 Tophat",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Mac10goesBRRRT/BTT_PiTFT",
|
|
"title": "PiTFT Mount",
|
|
"creator": "Mac10goesBRRRT",
|
|
"description": "Mount for the BTT PiTFT Touchscreen",
|
|
"printer_compatibility": "V2.4, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Majarspeed/Hartk_Mount_Galileo",
|
|
"title": "Hartk board mount galileo",
|
|
"creator": "Majarspeed",
|
|
"description": "It hangs stuff on your tool",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "MakeALeft/Switchwire_Front_Grill",
|
|
"title": "Switchwire Clean Center Grill",
|
|
"creator": "MakeALeft",
|
|
"description": "Removed magnet holders on center panel for cleaner look",
|
|
"printer_compatibility": "",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "MasturMynd/Stealth_Zero",
|
|
"title": "Stealth Zero",
|
|
"creator": "MasturMynd",
|
|
"description": "A low poly gantry with front tensioners and optional front mounted...",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "MathematicalPotato/v0.1_belted_z_drive",
|
|
"title": "V0.1 Belted Z Drive",
|
|
"creator": "MathematicalPotato",
|
|
"description": "Conversion to a belted Z axis for the V0.1 adapted from...",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Maverick/MiniSB_LGX_Lite",
|
|
"title": "MiniSB_LGXL",
|
|
"creator": "Maverick",
|
|
"description": "A Bondtech LGX Lite variant of the MiniSB",
|
|
"printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Maverick/MiniSB_Rapido",
|
|
"title": "MiniSB_Rapido",
|
|
"creator": "Maverick",
|
|
"description": "Modified MiniSB to use a Rapido hotend",
|
|
"printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Maverick/MiniSB_Sharkfin",
|
|
"title": "MiniSB_Sharkfin",
|
|
"creator": "Maverick",
|
|
"description": "Modified MiniSB to use a Sharkfin Extruder",
|
|
"printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Maverick/V0.2_Handles",
|
|
"title": "V0.2 Handles",
|
|
"creator": "Maverick",
|
|
"description": "Add handles to the extrusion tophat",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Maverick/V0.2_Stealth_Skirts",
|
|
"title": "V0.2 Stealth Skirts",
|
|
"creator": "Maverick",
|
|
"description": "Juiced up skirts for the V0.2",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Mckurt/Switchwire_Y_Belt_Tensioner",
|
|
"title": "Switchwire Y Belt Tensioner",
|
|
"creator": "Mckurt",
|
|
"description": "Switchwie Y axis Belt Tensioner",
|
|
"printer_compatibility": "VSW",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Mellow/V0_Fly-Gemini",
|
|
"title": "V0 Fly-Gemini",
|
|
"creator": "Mellow",
|
|
"description": "Fly-Gemini adapted model for V0",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail",
|
|
"title": "LGX mount for V0.1 with 2nd X rail",
|
|
"creator": "MikesMods",
|
|
"description": "V0.1 mod for mounting Bondtech LGX extruder with addition of 2nd X...",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Minsekt/Rear_Umbilical",
|
|
"title": "Rear Umbilical",
|
|
"creator": "Minsekt",
|
|
"description": "Rear Umbilical mounting solution including a relocated Y-Endstop",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "MrBean66/SKR_PRO_Mount",
|
|
"title": "SKR Pro DIN Mount",
|
|
"creator": "MrBean66",
|
|
"description": "Simple mod to mount the SKR Pro board from BTT to a DIN rails.",
|
|
"printer_compatibility": "V1.8, V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "MrDespair/MiniAB_Pinda",
|
|
"title": "MiniAB Pinda Probe Mount",
|
|
"creator": "MrDespair",
|
|
"description": "Replacement MiniAB Cowling to add a mount for a Pinda style probe.",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Mrgl-Mrgl/LGX_Lite_Mount",
|
|
"title": "LGX Lite Mount",
|
|
"creator": "Mrgl-Mrgl",
|
|
"description": "a mount for the LGX Lite",
|
|
"printer_compatibility": "V1.8, V2.4, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Nashuar/V0_Dragon_ToolheadStockScrews",
|
|
"title": "V0 Dragon Toolhead M2.5x8",
|
|
"creator": "Nashuar",
|
|
"description": "This toolhead uses the stock M2.5 screw that came with the dragon...",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Nomsplease/60mm_Shaft_Jig",
|
|
"title": "60mm Shaft Jig",
|
|
"creator": "Nomsplease",
|
|
"description": "Simple jig for cutting and grinding 60mm Z shafts",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Nomsplease/V0_Mods/duet_wifi_mount",
|
|
"title": "Duet Wifi Mount",
|
|
"creator": "Nomsplease",
|
|
"description": "Duet wifi mount in pocketwatch location",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Nomsplease/V0_Mods/led_mounts",
|
|
"title": "LED Mounts",
|
|
"creator": "Nomsplease",
|
|
"description": "Basic LED mounts for 10 and 12mm strips",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Nomsplease/V0_Mods/panel_mounts",
|
|
"title": "Remixed Panel Mounts",
|
|
"creator": "Nomsplease",
|
|
"description": "Remixed rear bottom panel mounts with stop",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Nomsplease/V0_Mods/pi_zero_camera_mount",
|
|
"title": "Pi Cam/ZeroW Mount",
|
|
"creator": "Nomsplease",
|
|
"description": "Mount for pi camera and ZeroW",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Nomsplease/V0_Mods/pocket_watch_rear_relocation",
|
|
"title": "Pocket Watch Rear Reolcation...",
|
|
"creator": "Nomsplease",
|
|
"description": "Pocket watch rear reolcation bracket",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Oakman/BTT_24V_UPS_Metal_DIN_Mount",
|
|
"title": "BTT 24V UPS Metal DIN Mount",
|
|
"creator": "Oakman",
|
|
"description": "Adapter to use a metal DIN mount for the BTT 24V UPS",
|
|
"printer_compatibility": "V1.8, V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Oakman/FYSETC_Spider_Metal_DIN_Mount",
|
|
"title": "FYSETC Spider Metal DIN Mount",
|
|
"creator": "Oakman",
|
|
"description": "Use a metal DIN mount for your FYSETC Spider",
|
|
"printer_compatibility": "V1.8, V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Oakman/RPI_Metal_DIN_Mount",
|
|
"title": "RPI Metal DIN Mount",
|
|
"creator": "Oakman",
|
|
"description": "Adapter for metal DIN mounting the Raspberry Pi",
|
|
"printer_compatibility": "V1.8, V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "OboMaker3D/C17-EXT",
|
|
"title": "C17-EXT Filter HEPA Carbon",
|
|
"creator": "OboMaker3D",
|
|
"description": "Replaces standard filter with new HEPA Crabon and 120mm fan V1.1",
|
|
"printer_compatibility": "V2.4, VSW, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "OboMaker3D/C17-EXT-CARTRIDGE",
|
|
"title": "C17-EXT-CARTRIDGE for C17-EXT...",
|
|
"creator": "OboMaker3D",
|
|
"description": "Alternative to a commercial cartridge for the C17-EXT filter",
|
|
"printer_compatibility": "V2.4, VSW, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Phalanx/Other-V2-Idlers",
|
|
"title": "\"Other\" Idlers Mod",
|
|
"creator": "Phalanx",
|
|
"description": "Allow usage of wider toolheads on the V2",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch",
|
|
"title": "V0.1 Z nozzle endstop switch",
|
|
"creator": "Polar-Ted",
|
|
"description": "Sexbolt style switch for V0",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Polar-Ted/V0_Two_Piece_Back_Panel",
|
|
"title": "V0.1 Two Piece Back Panel",
|
|
"creator": "Polar-Ted",
|
|
"description": "Vented 2 piece back panel for V0",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Polared/Power_Inlet_w_Keystone_Insert",
|
|
"title": "Power Inlet with Keystone Insert",
|
|
"creator": "Polared",
|
|
"description": "Voron 0.1 Power inlet with keystone insert slot",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Printopal/Magnetic_top_panel",
|
|
"title": "Magnetic top panel",
|
|
"creator": "Printopal",
|
|
"description": "Top panel with magnets allows for quick installation and removal",
|
|
"printer_compatibility": "V1.8, V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "PsychoShaft/C92X_PsycHoShafts_Mount",
|
|
"title": "C92X_PsycHoShafts_Mount",
|
|
"creator": "PsychoShaft",
|
|
"description": "2020 Top profile 920 camera mount / 2 point axis pivot",
|
|
"printer_compatibility": "V1.8, V2.4, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "QuackProfit/V0-Adafruit-Y_Rails",
|
|
"title": "V0 Adafruit NeoPixel LED Mounts",
|
|
"creator": "QuackProfit",
|
|
"description": "Mount Adafruit PCB NeoPixel Sticks on the V0 Y-rail extrusions",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Rhastlyn/60mmFanCover",
|
|
"title": "60mm Fan Cover",
|
|
"creator": "Rhastlyn",
|
|
"description": "A easy to install cover for spec 60mm fans originally designed for...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Rhastlyn/WansviewCameraMount",
|
|
"title": "Wansview 1080p Camera Mount",
|
|
"creator": "Rhastlyn",
|
|
"description": "A camera mount that replaces the OEM part to allow the camera to be...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "RockNLol/RockNRoll",
|
|
"title": "RockNRoll",
|
|
"creator": "RockNLol",
|
|
"description": "Rockers to roll the printer on its back for easier access to the...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "ScramblerUSA/SideSkirtPowerSwitch",
|
|
"title": "Side Skirt Power Switch",
|
|
"creator": "ScramblerUSA",
|
|
"description": "Skirt-mounted rocker switch for easy access for Voron 2.4",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "See1807/Voron_V0_Exhaust_and_LED_Mod",
|
|
"title": "TopHat Exhaust and LED Light",
|
|
"creator": "See1807",
|
|
"description": "A mount for 10mm LED strips and Exhaust for Voron V0",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Shiftingtech/Trident_dual_power_switch",
|
|
"title": "Trident Dual Power Switch",
|
|
"creator": "Shiftingtech",
|
|
"description": "A replacement skirt, allowing 2 power switches",
|
|
"printer_compatibility": "VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "ShinyPants/Orange_Pi_3_LTS_DIN",
|
|
"title": "OrangePi 3 LTS DIN Rail bracket",
|
|
"creator": "ShinyPants",
|
|
"description": "A DIN rail mount for OrangePi LTS 3",
|
|
"printer_compatibility": "V1.8, V2.4, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Shteeeeeve/V01-LED-Tophat",
|
|
"title": "V0.1 LED Tophat",
|
|
"creator": "Shteeeeeve",
|
|
"description": "V0.1 LED Tophat w/ 24V LED Lightstrip",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Slidr/PanzerBalls2.4",
|
|
"title": "PanzerBalls 2.4",
|
|
"creator": "Slidr",
|
|
"description": "Squash Ball Feet for V2.4",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Slidr/PanzerChain2.4",
|
|
"title": "PanzerChain 2.4",
|
|
"creator": "Slidr",
|
|
"description": "Energychain for V2.4",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Spaghetti-Bolognese/LCD_case_mod",
|
|
"title": "LCD Case Mod",
|
|
"creator": "Spaghetti-Bolognese",
|
|
"description": "Improvements to the V2.4 mini12864 LCD case inc E-stop button cover",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Spaghetti-Bolognese/Z_drive_motor_mount",
|
|
"title": "Simplified Z Drive Motor Mount",
|
|
"creator": "Spaghetti-Bolognese",
|
|
"description": "Z drive motor mount bracket mod to improve pulley to belt alignment",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "StvPtrsn/320mm_Build",
|
|
"title": "Skirts for a 320mm Build",
|
|
"creator": "StvPtrsn",
|
|
"description": "Skirts for a 320mm build",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "StvPtrsn/Keystone_Jack_Filtered_Mains_Panel",
|
|
"title": "Keystone Jack for Filtered Mains...",
|
|
"creator": "StvPtrsn",
|
|
"description": "Add a keystone jack to your filtered mains plug panel",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "StvPtrsn/Parts_Jigs_and_Mods",
|
|
"title": "Parts_Jigs and Mods",
|
|
"creator": "StvPtrsn",
|
|
"description": "Parts, Jigs and modifications I use for my builds",
|
|
"printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "StvPtrsn/Side_Fan_Support_No_Tape",
|
|
"title": "Side Fan Support, No Tape",
|
|
"creator": "StvPtrsn",
|
|
"description": "Mount the 60mm side fans and inserts without tape",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Takuya/USBCameraMount",
|
|
"title": "WANSVIEW USB Camera Mount",
|
|
"creator": "Takuya",
|
|
"description": "WANSVIEW 1080p Camera Mount for Voron 2.4",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "TheSquiffy/V0_Belts_holder",
|
|
"title": "V0 Belts holder",
|
|
"creator": "TheSquiffy",
|
|
"description": "V0 Belts Holder",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "TiagoBarata/Logitech_C270_Mount",
|
|
"title": "Logitech C270 Mount",
|
|
"creator": "TiagoBarata",
|
|
"description": "Logitech C270 Top Center Mount",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Tircown/DIN_mount_RS-15-5",
|
|
"title": "DIN mount RS-15-5 PSU",
|
|
"creator": "Tircown",
|
|
"description": "A DIN mount for the RS-15-5",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Tircown/Display_mount_5inch",
|
|
"title": "Display mount 5\"",
|
|
"creator": "Tircown",
|
|
"description": "Tiltable mount for a 5\" tactile display",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Tircown/Raspberry_plug_panel",
|
|
"title": "Raspberry in plug panel",
|
|
"creator": "Tircown",
|
|
"description": "Raspberry mount vertically in the plug panel, allow easy access to...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Tircown/V01_skirt_buttons",
|
|
"title": "V0.1 Skirt buttons",
|
|
"creator": "Tircown",
|
|
"description": "Buttons for V0.1 spec skirts",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Triano/Ender_3Pro_Switchwire",
|
|
"title": "Ender 3 Pro or V2 to Switchwire Mod",
|
|
"creator": "Triano",
|
|
"description": "Convesion of an Ender 3 Pro or V2 to a Switchwire",
|
|
"printer_compatibility": "VSW",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Ultrawaffles/Ender_3_to_SW",
|
|
"title": "Ender 3 to SW conversion",
|
|
"creator": "Ultrawaffles",
|
|
"description": "A conversion mod for the ender 3 to switchwire. Designed to allow...",
|
|
"printer_compatibility": "VSW",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "VinnyCordeiro/RGB_LED_grid_for_SB",
|
|
"title": "RGB LED grid for Stealthburner",
|
|
"creator": "VinnyCordeiro",
|
|
"description": "A small RGB LED grid for Stealthburner's logo",
|
|
"printer_compatibility": "V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Weaslus/Electronics-Bay-Seperator",
|
|
"title": "Electronics Bay and Enclosure...",
|
|
"creator": "Weaslus",
|
|
"description": "Better enclose chamber and keep heat from electronics",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "ZZP8202/Pull-out_electrical_store",
|
|
"title": "Pull-out electrical store",
|
|
"creator": "ZZP8202",
|
|
"description": "Voron 2.4 Pull-out electrical store\uff08350mm only\uff09",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Zen3D/V0_1515_T-nut",
|
|
"title": "V0 1515 T-nut",
|
|
"creator": "Zen3D",
|
|
"description": "M3 square and hex nuts for Voron0 1515 frame",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Zen3D/V0_Handle",
|
|
"title": "V0 Handle",
|
|
"creator": "Zen3D",
|
|
"description": "Voron0 Handle for 3mm panels",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "Zen3D/V0_MidPanel_HexPattern",
|
|
"title": "V0 MidPanel HexPattern",
|
|
"creator": "Zen3D",
|
|
"description": "Voron0 MidPanel with Hex pattern and Wire cover",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "Zen3D/V0_Skirt",
|
|
"title": "V0 Skirt set",
|
|
"creator": "Zen3D",
|
|
"description": "SSR, PowerSwitch, Adxl, Nameplate and color change printing",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-14 13:24:54 +0000"
|
|
},
|
|
{
|
|
"path": "aTinyShellScript/RS_PSU_DIN_Brackets",
|
|
"title": "RS PSU DIN Bracket",
|
|
"creator": "aTinyShellScript",
|
|
"description": "DIN brackets for MeanWell RS PSUs with 80mm spacing.",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "ademuri/Lights_Camera_Voron",
|
|
"title": "Lights, Camera, Voron",
|
|
"creator": "ademuri",
|
|
"description": "A mount for LED strips and Picam for the V0.1",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "aeresov/MeanWell_UHP_DIN_mount",
|
|
"title": "MeanWell UHP-xxx DIN mount",
|
|
"creator": "aeresov",
|
|
"description": "A bracket for MeanWell UHP series PSU (200, 350 and 500) to mount...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "aeresov/Raspberry_Pi_DIN_mount",
|
|
"title": "Raspberry Pi DIN mount",
|
|
"creator": "aeresov",
|
|
"description": "A bracket for Raspberry Pi 3/4 to mount it onto DIN rail, along or...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "aeresov/SKR_DIN_mount",
|
|
"title": "SKR 1.3/1.4 DIN mount",
|
|
"creator": "aeresov",
|
|
"description": "A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "aeresov/TL_filament_sensor_bracket",
|
|
"title": "TL filament sensor bracket",
|
|
"creator": "aeresov",
|
|
"description": "A bracket for TL filament sensor to mount near stock spool holder.",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "aeresov/cable_tie_DIN_mount",
|
|
"title": "cable tie DIN mount",
|
|
"creator": "aeresov",
|
|
"description": "A bracket for cable ties to route cables across DIN rails.",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "al3ph/analog_timer_mount",
|
|
"title": "Analog Timer Mount",
|
|
"creator": "al3ph",
|
|
"description": "A skirt mount for analog timer",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "al3ph/filament_runout",
|
|
"title": "Filament Runout Sensor",
|
|
"creator": "al3ph",
|
|
"description": "A simple filament runout sensor",
|
|
"printer_compatibility": "V0.2, V1.8, V2.4, VSW",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "al3ph/led_mount",
|
|
"title": "LED Mount",
|
|
"creator": "al3ph",
|
|
"description": "A mount for 10mm LED WS2812 strips",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "al3ph/pl05_mount",
|
|
"title": "PL05 Sensor Mount",
|
|
"creator": "al3ph",
|
|
"description": "A mount PL05 inductive sensor",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "alanho/BTT_PITFT50_v2_Mount",
|
|
"title": "BTT PITFT50 v2 Mount",
|
|
"creator": "alanho",
|
|
"description": "A mount for the BTT PITFT50 v2 Touch Display",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "albert/IKEA_Dioder_Led_Mount",
|
|
"title": "IKEA Dioder Led Mount",
|
|
"creator": "albert",
|
|
"description": "A mount for the IKEA Dioder LED strip",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "antoinecellerier/ds18b20-sensor-mount",
|
|
"title": "DS18B20 Sensor Mount",
|
|
"creator": "antoinecellerier",
|
|
"description": "DS18B20 temperature sensor mount",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "ardichoke/v0-long-thumb-nut",
|
|
"title": "V0 Long Thumb Nut",
|
|
"creator": "ardichoke",
|
|
"description": "Taller thumb nuts for V0 bed",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "arkeet/dti-mount",
|
|
"title": "Dial test indicator mount",
|
|
"creator": "arkeet",
|
|
"description": "A toolhead mount for a dial test indicator, where the tip is...",
|
|
"printer_compatibility": "V1.8, V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "arkeet/magnet-fan-cover",
|
|
"title": "Magnetic hotend fan cover",
|
|
"creator": "arkeet",
|
|
"description": "A replacement hotend fan cover, held with magnets instead of screws.",
|
|
"printer_compatibility": "V1.8, V2.4, VSW",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "arkeet/mgn12",
|
|
"title": "MGN12 X-axis",
|
|
"creator": "arkeet",
|
|
"description": "Replaces the dual MGN9H rails with a single MGN12H.",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "arkeet/v0-dc-inlet",
|
|
"title": "V0 DC inlet",
|
|
"creator": "arkeet",
|
|
"description": "Skirt inlet for external 24V DC power supply.",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "baccula/revo_skirt_nozzle_holder",
|
|
"title": "Revo Nozzle Holder for v2.4 350",
|
|
"creator": "baccula",
|
|
"description": "A remix of Andre's design allowing for skirt storage of 4 E3D Revo...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "beaugalbraith/Nova_Printhead",
|
|
"title": "Nova Printhead",
|
|
"creator": "beaugalbraith",
|
|
"description": "Use Nova Hotend with Afterburner",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "bobbleheed/Filament_Runout",
|
|
"title": "Filament Runout Sensor",
|
|
"creator": "bobbleheed",
|
|
"description": "Filament runout sensor that replaces the stock bowden retainer",
|
|
"printer_compatibility": "V1.8, V2.4, VT",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "bobbleheed/Magnetic_Panels",
|
|
"title": "Magnetic Panels",
|
|
"creator": "bobbleheed",
|
|
"description": "Magnetic clips to allow for easy removal and installation of panels",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "btp/Galileo_Switchwire_Chain_Mount",
|
|
"title": "Galileo chain mount (befenybay)",
|
|
"creator": "btp",
|
|
"description": "Modified chain mount position to cater for difference with Galileo...",
|
|
"printer_compatibility": "VSW",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "buzzdalf/connector_cover",
|
|
"title": "v1.8/2.4 Afterburner connector...",
|
|
"creator": "buzzdalf",
|
|
"description": "v1.8/2.4 Connector cover for 42STH20-1004AS",
|
|
"printer_compatibility": "V1.8, V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "buzzdalf/ender_switchwire_taller_z",
|
|
"title": "Ender 3 Switchwire Taller Z Mod",
|
|
"creator": "buzzdalf",
|
|
"description": "Taller Z Mod",
|
|
"printer_compatibility": "VSW",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "buzzdalf/ytension",
|
|
"title": "Ender 3 Switchwire Y Tensioner Mod",
|
|
"creator": "buzzdalf",
|
|
"description": "Y Tension Mod",
|
|
"printer_compatibility": "VSW",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "bythorsthunder/MGN9_Backers",
|
|
"title": "MGN9 Backers Idlers",
|
|
"creator": "bythorsthunder",
|
|
"description": "New idler uppers for MGN9 Extrusion backers",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "bythorsthunder/Stealthburner_Rapido_Uhf",
|
|
"title": "Stealthburner Rapido UHF",
|
|
"creator": "bythorsthunder",
|
|
"description": "Stealthburner mod for Rapido UHF",
|
|
"printer_compatibility": "V2.4, VSW, VT",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "chirpy/NozzleWiper",
|
|
"title": "V0.1 Nozzle Wiper",
|
|
"creator": "chirpy",
|
|
"description": "Servo powered nozzle wiper and purge bucket",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "chirpy/RunoutUnklicky",
|
|
"title": "Runout UnKlicky Sensor",
|
|
"creator": "chirpy",
|
|
"description": "Runout UnKlicky Sensor is a filament runout sensor with mounts for...",
|
|
"printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "chirpy/TipTophat",
|
|
"title": "V0.1 Raised Tophat",
|
|
"creator": "chirpy",
|
|
"description": "Alternative Tophat design that uses stock panels and raises height...",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "chri.kai.in/20x20mm_Profile_Covers",
|
|
"title": "20x20mm Profile Covers",
|
|
"creator": "chri.kai.in",
|
|
"description": "Provide overlapping and flush slot covers for 20x20mm slot6...",
|
|
"printer_compatibility": "V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "chri.kai.in/Angry_CAM_USB",
|
|
"title": "Angry CAM USB",
|
|
"creator": "chri.kai.in",
|
|
"description": "Housing for small USB camera module, allowing mounting to gantry or...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "chri.kai.in/Exhaust_Adapter_100mm",
|
|
"title": "Exhaust Adapter 100mm",
|
|
"creator": "chri.kai.in",
|
|
"description": "Replace 60mm exhaust fan with 100mm ventilation system adapter",
|
|
"printer_compatibility": "V1.8, V2.4, VT",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "chrisrgonzales/270_degree_hinge",
|
|
"title": "270\u00b0 Front Panel Hinge",
|
|
"creator": "chrisrgonzales",
|
|
"description": "Hinges that have 270\u00b0 of swivel, parametric CAD included",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "christophmueller/Phaetus_Dragonfly_BMO_Afterburner",
|
|
"title": "Phaetus and Zodiac Dragonfly BMO...",
|
|
"creator": "christophmueller",
|
|
"description": "Covers both the original Phaetus variant as well as the Zodiac one.",
|
|
"printer_compatibility": "V1.8, V2.4, VSW",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "claytono/2.4-extrusion-jig",
|
|
"title": "Voron 2.4 Extrusion Jig",
|
|
"creator": "claytono",
|
|
"description": "A jig help align extrusions to get a properly square frame",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "claytono/fysetc-s6-v2-mount",
|
|
"title": "Fysetc S6 V2 Mount",
|
|
"creator": "claytono",
|
|
"description": "DIN Mount for the Fysetc S6 V2 controller",
|
|
"printer_compatibility": "V1.8, V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "claytono/v0-zip-tie-skirts",
|
|
"title": "V0 Zip Tie Skirts",
|
|
"creator": "claytono",
|
|
"description": "V0 skirts with small loops added along the top to allow zip tyiing...",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "clee/Monster8_heatsert_mount",
|
|
"title": "Monster8 DIN Rail Mounts",
|
|
"creator": "clee",
|
|
"description": "DIN mount for Makerbase Monster8 V1/V2 controller",
|
|
"printer_compatibility": "V2.4, VT",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "cmrny/v01_motor_panel_no_rub",
|
|
"title": "V0.1 Motor Panel Modification",
|
|
"creator": "cmrny",
|
|
"description": "V0.1 Motor panel modification to keep umbilical and bowden tube...",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "conqueror433/Voron_Parts_Logo",
|
|
"title": "Voron Parts Logo",
|
|
"creator": "conqueror433",
|
|
"description": "Voron Parts Logo for your back panels, 3D Print or Laser Cut",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "conqueror433/Voron_V0.1_Parts_Logo",
|
|
"title": "Voron V0.1 Parts Logo",
|
|
"creator": "conqueror433",
|
|
"description": "Voron Parts Logo for your V0 deck panel",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "consibonsi/Y-Mod_SW_9mm",
|
|
"title": "Y-Mod SW 9mm",
|
|
"creator": "consibonsi",
|
|
"description": "9mm Y belt mod for SW",
|
|
"printer_compatibility": "VSW",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "csch0/SW_FanMount_No_Tape",
|
|
"title": "SW Fan Mount No Tape",
|
|
"creator": "csch0",
|
|
"description": "60x20 Fan Mount for SW without tape",
|
|
"printer_compatibility": "VSW",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "d3nny/mains_plug_panel_for_RND_165-00057",
|
|
"title": "Filtered Power Plug with...",
|
|
"creator": "d3nny",
|
|
"description": "Filtered Power Plug for RND 165-00057 and CAT6-Plug",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "davidauvergne/Center_cable_management_duct",
|
|
"title": "Center_cable_management_duct",
|
|
"creator": "davidauvergne",
|
|
"description": "Mod for a centered cable management",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "dePrintinator/HEPA_Filter_Exhaust",
|
|
"title": "HEPA Exhaust",
|
|
"creator": "dePrintinator",
|
|
"description": "HEPA filter chamber exhaust replacement.",
|
|
"printer_compatibility": "V1.8, V2.4, VT",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "deepfriedheroin/v0_bed_wagos",
|
|
"title": "v0 Wago Bed Mounts",
|
|
"creator": "deepfriedheroin",
|
|
"description": "Easy to install Wago mounts for the v0",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "deepfriedheroin/v0_power_wagos",
|
|
"title": "v0 Power Wagos",
|
|
"creator": "deepfriedheroin",
|
|
"description": "Easy to install Wago mounts for v0 mains",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "deepfriedheroin/v2_bed_wagos",
|
|
"title": "V2 Bed Wagos",
|
|
"creator": "deepfriedheroin",
|
|
"description": "Wire management for the v2 bed",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "doubletrouble/V0_Skirt_Mod",
|
|
"title": "V0 Skirt Mod",
|
|
"creator": "doubletrouble",
|
|
"description": "V0 Skirt Mod",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "eamars/stealthburner_crazy_dragon_toolhead",
|
|
"title": "Stealthburner (RC1) Dragon...",
|
|
"creator": "eamars",
|
|
"description": "The Stealthburner toolhead mount for Mellow Crazy, TriangleLab...",
|
|
"printer_compatibility": "V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "eddie/LED_Bar_Clip",
|
|
"title": "LED Bar Clip",
|
|
"creator": "eddie",
|
|
"description": "Modular LED Clip for mounting LED Strip to 2020 Extrusions",
|
|
"printer_compatibility": "V1.8, V2.4, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "eddie/V1.8_12mm_Z_Mod",
|
|
"title": "V1.8 12mm Z Mod",
|
|
"creator": "eddie",
|
|
"description": "Add V1.8 option for 12mm Z rods",
|
|
"printer_compatibility": "V1.8",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "edwardyeeks/Tridentified_V2.4_Power_Inlet",
|
|
"title": "Tridentified V2.4 Power Inlet",
|
|
"creator": "edwardyeeks",
|
|
"description": "Trident style side power inlet for V2.4 using Z Drive Motor...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "elcrni/Trident_Internal_Spool_Holder",
|
|
"title": "Trident Internal Spool Holder",
|
|
"creator": "elcrni",
|
|
"description": "Internal spool holder for 300 and 350 Tridents. Supports full size...",
|
|
"printer_compatibility": "VT",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "elcrni/V2.4-Trident-Spool-Holders",
|
|
"title": "V.24/Trident Spool Holder",
|
|
"creator": "elcrni",
|
|
"description": "Spool holder that mounts on top for \"too close to the wall\" printers",
|
|
"printer_compatibility": "V1.8, V2.4, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "evandepol/Crydom-GN-Guard",
|
|
"title": "Crydom GN Terminal Guard",
|
|
"creator": "evandepol",
|
|
"description": "A simple safety guard for the terminals on a Crydom GN SSR",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "evandepol/Voron2.4-Cable-clamps",
|
|
"title": "Voron 2.4 cable clamps",
|
|
"creator": "evandepol",
|
|
"description": "A set of 2020-mounted cable guards to organize and dress the wiring...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "falo/lgx_lite_side_can",
|
|
"title": "LGX Lite CAN Side Mount",
|
|
"creator": "falo",
|
|
"description": "A side mounting for a CAN board (Huvud/SHT42) to the LGX Lite",
|
|
"printer_compatibility": "V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "falo/magnetic_grill_cover",
|
|
"title": "Magnetic Exhaust Grill Cover",
|
|
"creator": "falo",
|
|
"description": "A magnetic cover to seal the filtered exhaust",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "falo/toolhead_pcb_to_can",
|
|
"title": "Toolhead PCB to CAN Mount Adaptor",
|
|
"creator": "falo",
|
|
"description": "A mount to enable side mounting of a CAN board (Huvud/SHT42) in...",
|
|
"printer_compatibility": "V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "filotto78/6mm_slot_cover",
|
|
"title": "6mm slot cover",
|
|
"creator": "filotto78",
|
|
"description": "Simple cover for extrusion with 6mm slot width",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "gamebofh/door-panels",
|
|
"title": "Laser cut door panels",
|
|
"creator": "gamebofh",
|
|
"description": "Files to allow you to create laser cut door panels with some...",
|
|
"printer_compatibility": "VSW",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "gauravmm/crazy_mozzie_cw2",
|
|
"title": "Crazy Mozzie HF toolhead SB+CW2",
|
|
"creator": "gauravmm",
|
|
"description": "Toolhead for Crazy Mozzie HF, compatible with Stealthburner and...",
|
|
"printer_compatibility": "V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "gen2eng/z_carriage_stop_pass_through",
|
|
"title": "Switchwire LED wire pass through",
|
|
"creator": "gen2eng",
|
|
"description": "Z Carriage Stop modification that makes pass through of wires for...",
|
|
"printer_compatibility": "VSW",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "geoffreyyoung/dual_rail_guide",
|
|
"title": "Dual Rail Installation Guide",
|
|
"creator": "geoffreyyoung",
|
|
"description": "Rail installation guide that also works for the 2.4 dual rail...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "geoffreyyoung/lgx",
|
|
"title": "LGX Info, Links, and Models",
|
|
"creator": "geoffreyyoung",
|
|
"description": "Useful information and models for using the Bondtech LGX extruder...",
|
|
"printer_compatibility": "V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "gerritwellen/manta-m8p-bracket",
|
|
"title": "Manta M8P Mount",
|
|
"creator": "gerritwellen",
|
|
"description": "Mounting Bracket for BTT Manta M8P",
|
|
"printer_compatibility": "V2.4, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "golas/v0-extended-tophat-hinge",
|
|
"title": "V0.1 Extended tophat hinge",
|
|
"creator": "golas",
|
|
"description": "Extended tophat for v0.1 with hinges (integrated or screwed ones).",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "golas/v0-trident-skirt-mix",
|
|
"title": "V0.1 Trident skirt remix with...",
|
|
"creator": "golas",
|
|
"description": "Trident style v0.1 skirt mix with 12864 Mini Lcd on front or plain...",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "hartk1213/Voron0.2_2.8_WaveshareDisplay",
|
|
"title": "Voron0.2 2.8 Waveshare Display",
|
|
"creator": "hartk1213",
|
|
"description": "2.8 Waveshare display for V0.2",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "hartk1213/Voron0.2_Rear_Keystone_Skirt",
|
|
"title": "Voron0.2 Rear Keystone Skirt",
|
|
"creator": "hartk1213",
|
|
"description": "Added keystone slot on rear skirt for V0.2",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "hartk1213/Voron0_C14Inlet",
|
|
"title": "Voron0 C14Inlet",
|
|
"creator": "hartk1213",
|
|
"description": "Added a new Power inlet that uses a Fused C14 plug and switch that...",
|
|
"printer_compatibility": "V0.1",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "hartk1213/Voron0_ExtendedLegs",
|
|
"title": "Voron0 ExtendedLegs",
|
|
"creator": "hartk1213",
|
|
"description": "New extended legs to raise the printer up a tiny bit more",
|
|
"printer_compatibility": "V0.1",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "hartk1213/Voron0_ExtrusionSkirt",
|
|
"title": "Voron0 ExtrusionSkirt",
|
|
"creator": "hartk1213",
|
|
"description": "Created a new skirt design that uses 50mm extrusions as legs and it...",
|
|
"printer_compatibility": "V0.1",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "hartk1213/Voron0_Hinged_Top_Hat",
|
|
"title": "Voron0 Hinged Top Hat",
|
|
"creator": "hartk1213",
|
|
"description": "Created a new hinged top hat design for the V0 so it can fold away...",
|
|
"printer_compatibility": "V0.1",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "hartk1213/Voron0_MGN9C_X_Axis",
|
|
"title": "Voron0 MGN9C X Axis",
|
|
"creator": "hartk1213",
|
|
"description": "This mod, replaces the stock MGN7H for MGN9C on the V0",
|
|
"printer_compatibility": "V0.1",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "hartk1213/Voron0_deck_panel_with_logo_and_VORON0",
|
|
"title": "Voron0 deck panel",
|
|
"creator": "hartk1213",
|
|
"description": "Used @Kruppes blank deck panel to add the logo as well as the name...",
|
|
"printer_compatibility": "V0.1",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "hartk1213/Voron0_display_dualcolor",
|
|
"title": "Voron0 display dualcolor",
|
|
"creator": "hartk1213",
|
|
"description": "Added a dual color file for the Voron Display Front housing",
|
|
"printer_compatibility": "V0.1",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "hartk1213/Voron2.4_GE5C",
|
|
"title": "Voron2.4 GE5C",
|
|
"creator": "hartk1213",
|
|
"description": "This mod replaces the stack of printed z joints with a metal...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "hartk1213/Voron2.4_SexBolt_ZEndstop",
|
|
"title": "Voron2.4 SexBolt ZEndstop",
|
|
"creator": "hartk1213",
|
|
"description": "This mod replaces stock V2 Z endstop with a different style",
|
|
"printer_compatibility": "V2.4, VT",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "hartk1213/Voron2.4_Trident_Pins_Mod",
|
|
"title": "Voron2.4 and Trident Pins Mod",
|
|
"creator": "hartk1213",
|
|
"description": "This mod replaces all the M5 screws for all idlers/pulleys/bearings...",
|
|
"printer_compatibility": "V2.4, VT",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "hartk1213/Voron2.4_Y_Endstop_Relocation",
|
|
"title": "Voron2.4 Y Endstop Relocation",
|
|
"creator": "hartk1213",
|
|
"description": "This mod relocates the Y endstop to the top A drive piece",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "henrikssn/parametric_spool_holder",
|
|
"title": "Parametric Spool Holder",
|
|
"creator": "henrikssn",
|
|
"description": "Spool holder where the length is a parameter.",
|
|
"printer_compatibility": "V1.8, V2.4, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "henrikssn/plug_panel_generic",
|
|
"title": "Plug Panel Mod for Generic...",
|
|
"creator": "henrikssn",
|
|
"description": "v2.4 plug panel for generic unfiltered modules with 66mm x 27mm...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "hergtoler/exhaust_120mm_duct",
|
|
"title": "Exhaust Housing for 120mm Fan...",
|
|
"creator": "hergtoler",
|
|
"description": "v2.4 Exhaust Housing for 120mm Fan and 4in Duct",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "hernsl/bottom_panel_mag_clip",
|
|
"title": "Bottom Panel Mag Clip",
|
|
"creator": "hernsl",
|
|
"description": "v2.4 magnetic clips to retain bottom panel",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "hhammarstrand/afterburner_connector_cover_42STH20-1004AS",
|
|
"title": "Afterburner connector cover for...",
|
|
"creator": "hhammarstrand",
|
|
"description": "Connector cover for 42STH20-1004AS",
|
|
"printer_compatibility": "VSW",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "hijax_pl/corner_panel_clip",
|
|
"title": "Corner panel clip",
|
|
"creator": "hijax_pl",
|
|
"description": "V2 panel corner frames using 3-way L brackets in the corners",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "hijax_pl/din_rail_mount",
|
|
"title": "Din Rail mount",
|
|
"creator": "hijax_pl",
|
|
"description": "Adapter to attach DIN Rail to 2020 extrusion.",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "hijax_pl/ender_compatible_controller_mount",
|
|
"title": "Controler Board adapters",
|
|
"creator": "hijax_pl",
|
|
"description": "DIN (rotated) and legacy adapters for boards like SKR mini E3.",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "hoschi/FYSETC_Spider_DIN_Mount",
|
|
"title": "FYSETC Spider DIN Rail Mount",
|
|
"creator": "hoschi",
|
|
"description": "DIN rail mount for FYSETC Spider",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "hymness1/10x11mm_chain_VSW",
|
|
"title": "10x11mm chain VSW",
|
|
"creator": "hymness1",
|
|
"description": "Printable and openable 10x11mm chain",
|
|
"printer_compatibility": "V0.2, VSW",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "hymness1/Quickdraw_probe_Voron_Switchwire",
|
|
"title": "Quickdraw probe Voron Switchwire",
|
|
"creator": "hymness1",
|
|
"description": "Detachable magnetic probe with docking system for VSW",
|
|
"printer_compatibility": "VSW",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "iblue/TophatExtractor",
|
|
"title": "V0.1 Tophat Extractor",
|
|
"creator": "iblue",
|
|
"description": "Tophat Extractor for the Voron V0.1 with activated charcoal and...",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "jappaj/FanSaver",
|
|
"title": "V0.1 FanSaver",
|
|
"creator": "jappaj",
|
|
"description": "A printable fix for overheating V0.1 blower fans",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "jasonc/Z_Idler_Shoulder_Bolt",
|
|
"title": "V2.4 Z-Idler Shoulder Bolt Mod",
|
|
"creator": "jasonc",
|
|
"description": "Modification to the idler carriers to accept a 25mm shoulder bolt....",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "jatson/plug_panel_schurter",
|
|
"title": "Plug panel mod for Schurter...",
|
|
"creator": "jatson",
|
|
"description": "A modified plug panel for Voron 2.4r1 with Schurter CD44.1101.151...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "jaysuk/4.3_fly_screen_mount",
|
|
"title": "4.3 Fly Screen Mount",
|
|
"creator": "jaysuk",
|
|
"description": "A mount for a 4.3\" Fly Screen",
|
|
"printer_compatibility": "V0, V0.1",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "jeoje/4.3_Inch_Touchscreen_Mount",
|
|
"title": "4.3\" Touchscreen Mount",
|
|
"creator": "jeoje",
|
|
"description": "Mounts a [Waveshare 4.3inch Capacitive Touch...",
|
|
"printer_compatibility": "V2.4, VSW",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "jeoje/Molex_MLX_Microfit_Bed_Connector_Mount",
|
|
"title": "Molex MLX and Microfit 3.0 Bed...",
|
|
"creator": "jeoje",
|
|
"description": "Solid mount your bed connectors",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "jeoje/Sturdy_Handles",
|
|
"title": "Sturdy Handles",
|
|
"creator": "jeoje",
|
|
"description": "Modified v2.2 handles with no panel rest and with 4 anchor points",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "jeoje/Z_Chain_Guide_Thermistor_Mount",
|
|
"title": "V2.4 Z Chain Guide with...",
|
|
"creator": "jeoje",
|
|
"description": "Modifies the Z chain guide to hold a chamber thermistor",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "jgehrig/v0_lcdskirt",
|
|
"title": "V0 LCD Touchscreen Skirt",
|
|
"creator": "jgehrig",
|
|
"description": "3.2\" LCD Touch Screen Skirt",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "johanncc/Raspberry_Pi_Camera_Mount",
|
|
"title": "Raspberry Pi Camera Mount",
|
|
"creator": "johanncc",
|
|
"description": "Low profile raspberry pi camera mount",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "joposter/v0_clippable_ledmounts",
|
|
"title": "V0 Clippable LED Caselight",
|
|
"creator": "joposter",
|
|
"description": "LED Case light for the V0 that clips into the extrusions",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "kageurufu/mgn12-euclid",
|
|
"title": "Euclid Probe Carriage",
|
|
"creator": "kageurufu",
|
|
"description": "A MGN-12 carriage with an inset mount for a Euclid Probe",
|
|
"printer_compatibility": "V1.8, V2.4, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "khay/V2-200_4020_Electronics_Fan",
|
|
"title": "Fan for V2-200mm\u00b2",
|
|
"creator": "khay",
|
|
"description": "Middle Skirt for V2-200mm\u00b2 Electronics Compartment",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "khay/V2_3x_Keystone_Plugpanel",
|
|
"title": "3x Keystone PlugPanel",
|
|
"creator": "khay",
|
|
"description": "PlugPanel with Options for 3 Keystones",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "khay/micro_backplate",
|
|
"title": "V0 Micro Backplate",
|
|
"creator": "khay",
|
|
"description": "Minimalistic backplate for cooler motors and electronics",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "kirby/v0_sherpa_mini_direct_drive",
|
|
"title": "V0 Sherpa Mini Direct Drive Mod",
|
|
"creator": "kirby",
|
|
"description": "A direct drive mod for the V0 using the Annex Sherpa Mini extruder",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "lakai/Bruag_Skirts",
|
|
"title": "Bruag Skirts",
|
|
"creator": "lakai",
|
|
"description": "V2 350mm skirts inspired by Bruag Facades",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "leandromarceddu/PowerSkirt",
|
|
"title": "PowerSkirt",
|
|
"creator": "leandromarceddu",
|
|
"description": "Modified skirtpiece for a digital power monitor",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "littleferris/V0_Skirt_Inlet",
|
|
"title": "V0 c14 Skirt Inlet",
|
|
"creator": "littleferris",
|
|
"description": "V0 C14 Skirt inlet",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "madfabrications/Vertical_PSU_Mount",
|
|
"title": "Vertical PSU Mount",
|
|
"creator": "madfabrications",
|
|
"description": "Mounts the PSU vertically on the DIN rails",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "madros/V0_skirt_OLED",
|
|
"title": "V0 OLED-skirt",
|
|
"creator": "madros",
|
|
"description": "V0 skirt with 0.96\" OLED",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "maximilian-foerg/AB_Turbo_Mod",
|
|
"title": "Afterburner Turbo Mod",
|
|
"creator": "maximilian-foerg",
|
|
"description": "A purely cosmetic mod for Afterburner",
|
|
"printer_compatibility": "V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "maximilian-foerg/VSW_Double_60mm_Fan_Mount",
|
|
"title": "Switchwire Double 60mm Fan Mount",
|
|
"creator": "maximilian-foerg",
|
|
"description": "A mount for two (or four) 60mm fans in SW's electronics compartment",
|
|
"printer_compatibility": "VSW",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "mikepthomas/MKS_Mosfet_Mount",
|
|
"title": "MKS Mosfet Mount",
|
|
"creator": "mikepthomas",
|
|
"description": "MKS Mosfet Mount based of the Trident Raspberry Pi Mount.",
|
|
"printer_compatibility": "V1.8, V2.4, VT",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "mjoaris/10x11_Cable_Chain_Endcaps",
|
|
"title": "10x11 Cable Chain Endcaps",
|
|
"creator": "mjoaris",
|
|
"description": "Printable Endcaps for 10x11 Cable Chains",
|
|
"printer_compatibility": "V1.8, V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "mjoaris/Mini12864_LCD_Mount_for_V2.4",
|
|
"title": "Mini12864 LCD Mount",
|
|
"creator": "mjoaris",
|
|
"description": "Swiveling case for the Fysetc Mini12864 LCD",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "mosher/m3_door_hinges",
|
|
"title": "Door hinges with M3 screws shafts",
|
|
"creator": "mosher",
|
|
"description": "Simple mod of print in place door hinges, which uses m3 screws as...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "mpfl/V0.1_skirt_OLED",
|
|
"title": "V0.1 OLED-skirt",
|
|
"creator": "mpfl",
|
|
"description": "V0.1 skirt with 0.96\" OLED",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "muradir/Zodiac_BMO_Stealthburner_Toolhead",
|
|
"title": "Zodiac BMO Stealthburner Toolhead",
|
|
"creator": "muradir",
|
|
"description": "A Stealthburner toolhead for the Zodiac BMO Hotend, based on the...",
|
|
"printer_compatibility": "V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "natewalck/v1.8_Jigs",
|
|
"title": "V1.8 Jigs",
|
|
"creator": "natewalck",
|
|
"description": "Jigs for assembling V1.8",
|
|
"printer_compatibility": "V1.8",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "nhchiu/V0.1_Movable_Pulley_Z",
|
|
"title": "V0.1 Movable Pulley Z Drive",
|
|
"creator": "nhchiu",
|
|
"description": "A movable pulley system on the Z axis with 1:8 total speed ratio...",
|
|
"printer_compatibility": "V0.1",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "nikolasbabetas/Neopixel_Holder",
|
|
"title": "Neopixel Holder",
|
|
"creator": "nikolasbabetas",
|
|
"description": "A holder to attach Neopixel/WS2812B Led Strips to the V0.1",
|
|
"printer_compatibility": "V0.1",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "ommy/roller_brackets",
|
|
"title": "roller brackets",
|
|
"creator": "ommy",
|
|
"description": "Brackets to help rolling V2 on its side.",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "oxno/rbp_zero_braket",
|
|
"title": "RBP Zero Bracket",
|
|
"creator": "oxno",
|
|
"description": "Bracket for Raspberry pi zero.",
|
|
"printer_compatibility": "V1.8, V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "padok/chain_anchor-ADXL345_mount",
|
|
"title": "Chain Anchor - ADXL345 mount Mod",
|
|
"creator": "padok",
|
|
"description": "A ADXL345 mount for the Afterburner",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "piet206/V1.8._Z_Rails_Mod",
|
|
"title": "V1.8 Z Rails Mod",
|
|
"creator": "piet206",
|
|
"description": "Add MGN12H linear rails for Z axis motion",
|
|
"printer_compatibility": "V1.8",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "prasadp4009/SW_SB_CRTouch",
|
|
"title": "StealthBurner CR Touch Mod",
|
|
"creator": "prasadp4009",
|
|
"description": "Voron SW StealthBurner CR Touch Mod",
|
|
"printer_compatibility": "VSW",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "quattroerik/front_door_m3_180_deg_3mm",
|
|
"title": "V2.4 Door Hinge M3 3mm 180deg",
|
|
"creator": "quattroerik",
|
|
"description": "Voron 2.4 door hinges for 3mm panel, 180 deg opening and m3 screw...",
|
|
"printer_compatibility": "V2.4, VT",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "randell/Door_Hinges",
|
|
"title": "Door Hinges",
|
|
"creator": "randell",
|
|
"description": "Door hinges that use an M3 bolt for a pin and bolts thru the panel",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "randell/Microswitch_Endstop",
|
|
"title": "Microswitch Pod for PCB",
|
|
"creator": "randell",
|
|
"description": "Modified endstop pod for use of endstop switches mounted on a PCB",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "raymondh/LargeSpoolHolders",
|
|
"title": "Large Spool Holders",
|
|
"creator": "raymondh",
|
|
"description": "Larger spool holders for KVP spools",
|
|
"printer_compatibility": "V1.8, V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "reQu1em00/Kirigami_LED_Bed_Front",
|
|
"title": "Kirigami LED Bed Front",
|
|
"creator": "reQu1em00",
|
|
"description": "Kirigami bed front with space for a single LED or Neopixel button",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "reapola/MKS_CANable_Pro_mount",
|
|
"title": "MKS CANable Pro DIN Mount",
|
|
"creator": "reapola",
|
|
"description": "MKS CANable Pro mount which mounts on a DIN rail",
|
|
"printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "revnull/rpi_7in_display_mount",
|
|
"title": "Raspberry Pi 7inch Display Mount",
|
|
"creator": "revnull",
|
|
"description": "An articulating mount for the offical Raspberry Pi 7inch touch screen",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "richardjm/adxl-chain",
|
|
"title": "ADXL drag chain mount",
|
|
"creator": "richardjm",
|
|
"description": "Permanent mount for ADXL boards on the back of the motor, replacing...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "richardjm/back-plate",
|
|
"title": "Back blanking plate",
|
|
"creator": "richardjm",
|
|
"description": "Back blanking plate that can be used instead of the exhaust filter...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "richardjm/led-mounts",
|
|
"title": "LED 15.5mm quarter round mounts",
|
|
"creator": "richardjm",
|
|
"description": "Mounting corners with integrated cable runs for 15.5mm quarter...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "richardjm/picam-corner",
|
|
"title": "Picam corner mount",
|
|
"creator": "richardjm",
|
|
"description": "Out of the way corner mounted picam",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "richardjm/snap-latch-2020",
|
|
"title": "Printable snap latches for 2020...",
|
|
"creator": "richardjm",
|
|
"description": "Quick release panel latch inspired by the work of others.",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "rngSplat/SW_Deck_Plate",
|
|
"title": "Printable Switchwire Deck Plate",
|
|
"creator": "rngSplat",
|
|
"description": "Print a deck plate for Switchwire with debossed Voron logo",
|
|
"printer_compatibility": "VSW",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "roboticator24/4inch_touchscreen_mount_for_v2.4",
|
|
"title": "Touchscreen for OctoDash",
|
|
"creator": "roboticator24",
|
|
"description": "Mount a 4-inch LCD touchscreen to your V2.4 in place of the usual...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "rsheng118/BTT_octopus_DIN_vertical_mount",
|
|
"title": "BTT octopus DIN vertical mount",
|
|
"creator": "rsheng118",
|
|
"description": "DIN vertical mount for Big Tech Tree Octopus board",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "ryandam/Cable_management_duct",
|
|
"title": "Cable Management Duct",
|
|
"creator": "ryandam",
|
|
"description": "Zip tie mount intergrated cable duct to hide your cable",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "sammynorway/LGX-stealthburner-connector-cover",
|
|
"title": "LGX stealthburner connector cover",
|
|
"creator": "sammynorway",
|
|
"description": "Cable cover for LGX and stealthburner",
|
|
"printer_compatibility": "V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "samwiseg0/4channel_relay_under_deck_mount",
|
|
"title": "4 Channel Relay Under Deck Mount",
|
|
"creator": "samwiseg0",
|
|
"description": "Mod to mount a 4 channel GPIO controlled relay",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "samwiseg0/ab_plug_microfit_1x4",
|
|
"title": "AB Plug (Microfit 1x4)",
|
|
"creator": "samwiseg0",
|
|
"description": "Mod to mount A & B motor connectors to the gantry",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "samwiseg0/corner_cable_hide",
|
|
"title": "Corner Cable Hide/Cover (LED Wires)",
|
|
"creator": "samwiseg0",
|
|
"description": "Mod to hide cables around z idlers",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "samwiseg0/esp8266_nodemcu_din_mount",
|
|
"title": "ESP8266 NodeMCU Din Mount",
|
|
"creator": "samwiseg0",
|
|
"description": "Din mount for ESP8266 NodeMCU",
|
|
"printer_compatibility": "V2.4, VT",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "samwiseg0/extrusion_thermistor_mount",
|
|
"title": "Extrusion/Chamber Thermistor Mount",
|
|
"creator": "samwiseg0",
|
|
"description": "Extrusion mount for a NTC100K Thermistor extrusion",
|
|
"printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "samwiseg0/lrs_screw_terminal_cover",
|
|
"title": "LRS PSU Screw Terminal Cover",
|
|
"creator": "samwiseg0",
|
|
"description": "Mod to cover the screw terminals for several LRS style PSUs",
|
|
"printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "samwiseg0/microfit_2x3_skirt_connector_adxl",
|
|
"title": "Microfit 2x3 Skirt Connector (ADXL)",
|
|
"creator": "samwiseg0",
|
|
"description": "Mod for a Microfit 2x3 connector to be mounted in a skirt",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "samwiseg0/voyager_gtx_din_mount",
|
|
"title": "Corsair Flash Voyager GTX Din Mount",
|
|
"creator": "samwiseg0",
|
|
"description": "Din carrier for a Corsair Flash Voyager GTX",
|
|
"printer_compatibility": "V2.4, VT",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "scanlory/clip_on_door_frame",
|
|
"title": "Clip-On Front Door Frame",
|
|
"creator": "scanlory",
|
|
"description": "Clip-on frame to stiffen and seal front door panels when using...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "slitte/PCB_Probe",
|
|
"title": "PCB_Probe",
|
|
"creator": "slitte",
|
|
"description": "PCB for BAT85 and pull up resistor",
|
|
"printer_compatibility": "V2.4, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "slitte/ssd_bracket",
|
|
"title": "ssd_bracket",
|
|
"creator": "slitte",
|
|
"description": "bracket for mounting a 2.5\" ssd to a din rail",
|
|
"printer_compatibility": "V2.4, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "sloscotty/SW_Wall_Plate",
|
|
"title": "Switchwire Wall Plate",
|
|
"creator": "sloscotty",
|
|
"description": "SW plate for enclosure",
|
|
"printer_compatibility": "VSW",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "sloscotty/TopHat_Cam_Extension",
|
|
"title": "NoNutz TopHat Cam Extension",
|
|
"creator": "sloscotty",
|
|
"description": "Tophat extension with integrated webcam for V0/0.1",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "spacelab2021/Orbiter-Clockwork",
|
|
"title": "Orbiter Clockwork Mount",
|
|
"creator": "spacelab2021",
|
|
"description": "A clockwork adaptor for the Orbiter v1.5 Extruder with full...",
|
|
"printer_compatibility": "V1.8, V2.4, VSW, VT",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "sse018/Octopus_DIN_Rail_bracket",
|
|
"title": "Octopus DIN Rail bracket",
|
|
"creator": "sse018",
|
|
"description": "A Din rail mount for BTT Octopus board",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "strayr/stealthburner_creality_toolhead",
|
|
"title": "Creality toolhead for stealthburner",
|
|
"creator": "strayr",
|
|
"description": "Use a creality ender 3 style hotend with stealthburner",
|
|
"printer_compatibility": "V1.8, V2.4, VSW",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "sttts/Waveshare-5.5-inch-HDMI-AMOLED",
|
|
"title": "Waveshare 5.5inch HDMI AMOLED Mount",
|
|
"creator": "sttts",
|
|
"description": "Mod to mount a Waveshare 5.5inch full HD display on a V2",
|
|
"printer_compatibility": "V2.4, VSW",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "tallman5/z-locks",
|
|
"title": "Z Locks",
|
|
"creator": "tallman5",
|
|
"description": "Helping hands curing v2.4 build, replaces long zip ties.",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "tameike/DIN_Rail_2020_holder",
|
|
"title": "Din Rail 2020 Holder",
|
|
"creator": "tameike",
|
|
"description": "Attaching DIN Rails to 2020",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "tameike/DIN_Rail_SKR_1.3_90deg",
|
|
"title": "Din Rail SKR 90 deg",
|
|
"creator": "tameike",
|
|
"description": "SKR V1.3 bracket turned 90 degrees",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "tameike/Jetpack_V0",
|
|
"title": "Jetpack V0 base",
|
|
"creator": "tameike",
|
|
"description": "Attach Jetpack to V0 frame",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "tameike/V0_TR_Mounting_Frame",
|
|
"title": "TacoRaven Mounting Frame",
|
|
"creator": "tameike",
|
|
"description": "TR V0 mount",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "tayto-chip/skirt_switch_mod",
|
|
"title": "V2.4 Skirt Switch Mod",
|
|
"creator": "tayto-chip",
|
|
"description": "Add a ON/OFF Switch to side or front skirts",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "teookie/AB_dial_indicator_mount",
|
|
"title": "AB dial indicator mount",
|
|
"creator": "teookie",
|
|
"description": "Mount for attaching standard dial indicators to AB",
|
|
"printer_compatibility": "V1.8, V2.4, VSW",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "teookie/skr_brace",
|
|
"title": "SKR Brace",
|
|
"creator": "teookie",
|
|
"description": "Rigidize and stabilize SKR 1.4 mounts",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "th0mpy/beefy-din",
|
|
"title": "BEEFY Din Clips",
|
|
"creator": "th0mpy",
|
|
"description": "Two piece BEEFY Din Clips, holds stronger",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "togi/exhaust_housing_side_fitting",
|
|
"title": "Exhaust housing side fitting",
|
|
"creator": "togi",
|
|
"description": "Moves the exhaust housing bowden fitting 90 degrees to allow the...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "top_gun_de/mount_for_umbilical",
|
|
"title": "mount_for_umbilical",
|
|
"creator": "top_gun_de",
|
|
"description": "Umbilical guide that goes on the chain anchor",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "warriorofwire/slenderfan",
|
|
"title": "Slenderfan for Afterburner",
|
|
"creator": "warriorofwire",
|
|
"description": "Lighter, quieter, smaller Afterburner",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "whoppingpochard/extrusion_backers",
|
|
"title": "Extrusion Backers",
|
|
"creator": "whoppingpochard",
|
|
"description": "Laser-cut metal pieces to counteract bimetallic frame warping",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "wile-e1/Deck_Panel_Support_Clips",
|
|
"title": "Deck Panel Support Clips",
|
|
"creator": "wile-e1",
|
|
"description": "Clips to help support lower deck panels to prevent (or fix) warping:",
|
|
"printer_compatibility": "V1.8, V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "wile-e1/Stealthburner_CW1_PCB_Cover",
|
|
"title": "Stealthburner + CW1 + PCB Cover",
|
|
"creator": "wile-e1",
|
|
"description": "Low-poly for Stealthburner + CW1 + PCB installations:",
|
|
"printer_compatibility": "V1.8, V2.4, VSW",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "wrez/astrodyne-inlet",
|
|
"title": "V0 Alternate IEC 320 C14 Power...",
|
|
"creator": "wrez",
|
|
"description": "Drop in replacement for alternate-source power inlet if spec inlet...",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "xbst_/ADXL345_V0_Mount",
|
|
"title": "ADXL345 V0 Mount",
|
|
"creator": "xbst_",
|
|
"description": "V0 Mount for a ADXL345 module",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "xbst_/Bed_Hinge",
|
|
"title": "Car Hood Style Bed Hinge",
|
|
"creator": "xbst_",
|
|
"description": "A way of reaching electronics from the top by having a \"car hood\"...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "xbst_/Duct_Mount",
|
|
"title": "Duct Mount",
|
|
"creator": "xbst_",
|
|
"description": "100mm/4\" ducting mount for ventilation. Also supports umbilical...",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "xbst_/DuetZero",
|
|
"title": "DuetZero",
|
|
"creator": "xbst_",
|
|
"description": "Pi Zero mount over a Duet2 for space saving",
|
|
"printer_compatibility": "V0.2, V1.8, V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "xbst_/Easy_Access_Rear_Panels_v0",
|
|
"title": "Easy Access Rear Panels",
|
|
"creator": "xbst_",
|
|
"description": "New rear panels designed to expose the extruder for easy filament...",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "xbst_/Flat_Skirts",
|
|
"title": "Flat V2.4 Skirts",
|
|
"creator": "xbst_",
|
|
"description": "Flat V2.4 Skirts so a panel without cutouts can be used",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "xbst_/HOYMK_SSR_Mount",
|
|
"title": "HOYMK SSR Mount",
|
|
"creator": "xbst_",
|
|
"description": "Mount for Chinese HOYMK SSR",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "xbst_/Hat_LED_Mount",
|
|
"title": "Hat LED Mount",
|
|
"creator": "xbst_",
|
|
"description": "Top Hat LED module mount",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "xbst_/LED_Holder",
|
|
"title": "PCB LED Holder",
|
|
"creator": "xbst_",
|
|
"description": "Very simple mount for some (?) PCB LED Bars",
|
|
"printer_compatibility": "V1.8, V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "xbst_/Max31865_DIN_Mount",
|
|
"title": "DIN Mount Max31865",
|
|
"creator": "xbst_",
|
|
"description": "A simple DIN rail mount for the Adafruit (or SAME SIZE clone)...",
|
|
"printer_compatibility": "V1.8, V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "xbst_/Omron_DIN_Mount",
|
|
"title": "DIN Mount Omron Relay",
|
|
"creator": "xbst_",
|
|
"description": "A simple DIN rail mount for the BOM Relay",
|
|
"printer_compatibility": "V1.8, V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "xbst_/Relay_DIN_Mount",
|
|
"title": "DIN Mount Pi 4x Relay Board",
|
|
"creator": "xbst_",
|
|
"description": "A simple DIN rail mount for the 4 channel relay board for Raspberry Pi",
|
|
"printer_compatibility": "V1.8, V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "xbst_/V0_Electronic_Panel",
|
|
"title": "V0 Electronics Cover",
|
|
"creator": "xbst_",
|
|
"description": "A printed cover for v0 electronics. Requires larger printer to print.",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "xbst_/V0_M4_Mod",
|
|
"title": "Mobius 4 (M4) V0 Mod",
|
|
"creator": "xbst_",
|
|
"description": "Mod to mount a M4 extruder to a Voron 0 where pocketwatch extruder...",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "xbst_/V0_Picam",
|
|
"title": "V0 PiCam Mount",
|
|
"creator": "xbst_",
|
|
"description": "A Raspberry Pi Camera Mount For V0",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "xbst_/V0_Screw_Front_Hinge_Mod",
|
|
"title": "Screwed Front Door Hinge",
|
|
"creator": "xbst_",
|
|
"description": "Mod to screw the front door panel (instead of VHB)",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "xbst_/V0_Skirt_Buttons",
|
|
"title": "V0 Buttons & OLED Mount",
|
|
"creator": "xbst_",
|
|
"description": "Mod to mount custom Gcode macro buttons & Waveshare 1.3\" OLED display",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "xbst_/V2.4_Fanless_Middle_Skirt",
|
|
"title": "V2.4 Fanless Middle Skirt",
|
|
"creator": "xbst_",
|
|
"description": "A Fanless alternative middle side skirt",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "xbst_/V2.4_Skirt_Buttons",
|
|
"title": "V2.4 Skirt Buttons",
|
|
"creator": "xbst_",
|
|
"description": "Skirt mod for custom Gcode macro buttons",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "xbst_/ZipClip_v0",
|
|
"title": "ZipClip V0",
|
|
"creator": "xbst_",
|
|
"description": "Very simple ziptie mount for v0 1515 extrusions",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "xceled/Single_Panel_Magnet_Mount",
|
|
"title": "Single Panel Magnet Mount",
|
|
"creator": "xceled",
|
|
"description": "Mount your front panel using only magnets",
|
|
"printer_compatibility": "V2.4",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "yenda/vsw_more_robust_belt_paths",
|
|
"title": "SW More Robust XZ Belt Paths",
|
|
"creator": "yenda",
|
|
"description": "Small mods to belt routing components to ensure a better/more...",
|
|
"printer_compatibility": "VSW",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "yeri/V0_Magnetic_Panels",
|
|
"title": "V0 Magnetic Panels",
|
|
"creator": "yeri",
|
|
"description": "Mount V0 panels with magnets, removes need for hinges and lets you...",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-13 14:30:27 +0000"
|
|
},
|
|
{
|
|
"path": "yeri/V1_3Z",
|
|
"title": "V1 3Z",
|
|
"creator": "yeri",
|
|
"description": "3Z mod for V1",
|
|
"printer_compatibility": "V1.8",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
},
|
|
{
|
|
"path": "zruncho/V0_No_Drop_Nuts",
|
|
"title": "V0 No-Drop Nuts",
|
|
"creator": "zruncho",
|
|
"description": "Voron0 nut inserts which auto-align (LDO frames only)",
|
|
"printer_compatibility": "V0.2",
|
|
"last_changed": "2023-07-15 11:51:22 +0000"
|
|
}
|
|
] |