zach
/
VoronUsers
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
VoronUsers/printer_mods/Zen3D/V0_1515_T-nut
History
Florian Heilmann 9297c345a3 Add STL section to all metadata files 2024-01-08 17:38:25 +01:00
..
LDO V0 1515 T-Nuts (#260) 2021-03-23 20:49:40 -04:00
MakerBeam V0 1515 T-Nuts (#260) 2021-03-23 20:49:40 -04:00
.metadata.yml Add STL section to all metadata files 2024-01-08 17:38:25 +01:00
IMG1.jpg V0 1515 T-Nuts (#260) 2021-03-23 20:49:40 -04:00
IMG2.jpg V0 1515 T-Nuts (#260) 2021-03-23 20:49:40 -04:00
IMG3.jpg V0 1515 T-Nuts (#260) 2021-03-23 20:49:40 -04:00
README.md V0 1515 T-Nuts (#260) 2021-03-23 20:49:40 -04:00

README.md

Voron0 1515 T-Nut

It is a great help during installation to prevent the nuts from moving. During the construction of Voron0, it comes in very handy with the screws of MidPanel, TopHat, BedMount.

hardware:

  • M3 Square Nuts from Aliexpress (5.5mm x 5.5mm x 2mm) (Recommended!)

or

  • M3 hex nuts. The hex nut is too high, it is difficult to print because only one or two layers get under the nut. (depending on the frame) But it also works.

The MakerBeam version is lower than the LDO version.

print settings:

  • layer height: 0.2mm

IMG1 IMG2 IMG3