VoronUsers/printer_mods/mods.json

[{"path": "1-0-R/handle", "title": "V2.4 handle", "creator": "1-0-R", "description": "Handle for Voron 2.4", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "120decibell/exhaust_housing_side_entry", "title": "Side entry exhaust housing", "creator": "120decibell", "description": "Exhaust housing with dual cover screws and single or dual side...", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "120decibell/huvud_chain_mount", "title": "Huvud Chain Mount", "creator": "120decibell", "description": "Huvud rear mount for Clockwork or LGX that supports a cable chain.", "printer_compatibility": "V1.8, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "3dpandme/Fannypack_zero", "title": "FANnypack zero", "creator": "3dpandme", "description": "Electronics cooling solution for Voron Zero", "printer_compatibility": "V0.2, VSW, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "3dpandme/Thermistor_holder_zero", "title": "Thermistor holder zero", "creator": "3dpandme", "description": "Extended thermistor holder for Voron Zero", "printer_compatibility": "V0.2, VSW, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "3vilson/V0.1_Skirt_Holes", "title": "V0.1_Skirt_Holes", "creator": "3vilson", "description": "Skirt with Access Holes from the bottom", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "3vilson/V0.1_Skirt_Inlet", "title": "V0.1_Skirt_Inlet", "creator": "3vilson", "description": "Skirt with C14 inlet + New feet to screw into", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "42bios/LED_mount", "title": "LED mount", "creator": "42bios", "description": "AngryLED - LED-mount for Lumentech LT3 profiles.", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "42bios/corner_panel_clip_cable", "title": "Corner panel clip w. cable", "creator": "42bios", "description": "Corner panel clip with an internal cable path.", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "42bios/exhaust_filter_housing_side", "title": "Exhaust filter housing - side...", "creator": "42bios", "description": "Exhaust filter housing with the G1-8 \"thread on the side.", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "42bios/relay_mount", "title": "relay mount", "creator": "42bios", "description": "relay-mount for 2x 2 channel relay modules.", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Akio/cable_routing_z_belt_cover", "title": "Hidden cable routing z belt cover", "creator": "Akio", "description": "Z belt covers that allow hidden cable routing.", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "AlexanderT-Moss/270-Clamping-Hinges", "title": "270 Clamping Hinges", "creator": "AlexanderT-Moss", "description": "Simple 270 degree hinges that clamp to the front panels instead of...", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Andre/Mini_Afterburner_ADXL345_Mount", "title": "Mini Afterburner ADXL345 Mount", "creator": "Andre", "description": "Mount for an AXDL345 on the Mini Afterburner", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Andre/Mini_Afterburner_Strain_Relief", "title": "Mini Afterburner Strain Relief", "creator": "Andre", "description": "A replacement strain relief for the Mini Afterburner toolhead", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Andre/Revo_Nozzle_Skirt_Trident", "title": "Revo Nozzle Skirt", "creator": "Andre", "description": "A Revo nozzle box hidden in a Trident skirt.", "printer_compatibility": "VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Andre/V0_Neopixel_Front_Bed_Mount", "title": "V0 Neopixel Front Bed Mount", "creator": "Andre", "description": "A replacement Front Bed Mount with room for a neopixel or dotstar...", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Backenfutter/Mount_for_Electreeks_Camera", "title": "Mount for Electreeks Camera", "creator": "Backenfutter", "description": "This Mod is a simple \"One Piece\" mount for the popular Electreeks...", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Badnoob/AB-BN", "title": "AB-BN Afterburner mod (5015)", "creator": "Badnoob", "description": "Improved Afterburner with 5015 fan", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Badnoob/ABBN_for_Stock", "title": "AB-BN for Stock Afterburner (4020)", "creator": "Badnoob", "description": "Improved Dragon and Rapido toolhead for stock Afterburner with 4020...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Badnoob/Precision_AB_Drive", "title": "Precision AB Drive", "creator": "Badnoob", "description": "Changes the gearing for the AB drives to improve both resolution...", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Badnoob/Rail_Alignment", "title": "Rail Alignment", "creator": "Badnoob", "description": "Tools and procedure to properly align the rails in 2.4 and Afterburner", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Baltojikale/LoudOwl_aka_Stabby", "title": "LoudOwl aka Stabby", "creator": "Baltojikale", "description": "Alternative dual 5015 part cooling fan toolhead for Afterburner", "printer_compatibility": "V1.8, V2.4, VSW", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "BladeScraper-Designs/CornerPanel_SpoolHolder", "title": "CornerPanel_SpoolHolder", "creator": "BladeScraper-Designs", "description": "A better supported Spool Holder that mounts to a modified corner...", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "BladeScraper-Designs/Horizontal-Spool-Holder", "title": "Horizontal Spool Holder", "creator": "BladeScraper-Designs", "description": "Based on the stock holder but mounts to the horizontal extrusions.", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "BladeScraper-Designs/Microswitch_Pod_With_Conector", "title": "Microswitch Pod With Connector", "creator": "BladeScraper-Designs", "description": "Microswitch pod with JST-XH 4-pin connector", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Blamm/lrs-100", "title": "LRS-100 DIN mount", "creator": "Blamm", "description": "DIN rail mount for an extra LRS-100 Power Supply", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "BlueBear/Bowden_Fence", "title": "Bowden Fence", "creator": "BlueBear", "description": "A little \"fence\" to hold the tubes away from the belts.", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "BlueBear/Deck_Panel_Backpack", "title": "Deck Panel Backpack", "creator": "BlueBear", "description": "A mounting alternative if you don't want to drill your deck panel", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "BlueBear/Wago_221_mount", "title": "Clippable Wago 221 Mounts", "creator": "BlueBear", "description": "Mounts for Wago 221 to screw or clip-in on 1515 extrusions", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "BlueBear/Ziptie_Mount", "title": "Ziptie Mount", "creator": "BlueBear", "description": "Clippable Ziptie hooks for 1515 extrusions", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Boingomw/Wago_mount", "title": "Wago mount", "creator": "Boingomw", "description": "Smaller 5 port Wago mount that fits parallel to the support rails", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Bondtech/Mini-After-LGX-Lite", "title": "Mini-After-LGX-Lite", "creator": "Bondtech", "description": "LGX Lite Toolhead Setup For Voron V0.1.", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "ByteChild/2_Channel_Relay_DIN_Rail_Bracket", "title": "2-Channel Relay DIN Rail Bracket", "creator": "ByteChild", "description": "DIN Rail mounting bracket for an 2-Channel-Relay", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "ByteChild/ESP32_DIN_Rail_Bracket", "title": "ESP32 DIN Rail Bracket", "creator": "ByteChild", "description": "DIN rail mounting bracket for an ESP32", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "CannedBass/PITFT50_45_degree_mount", "title": "PITFT50 45-degree mount", "creator": "CannedBass", "description": "Mount that puts the screen at a 45-degree angle for more vertical...", "printer_compatibility": "V2.4, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "CannedBass/Trident_Bed_Fans", "title": "Trident Bed Fans", "creator": "CannedBass", "description": "Bed fans for Trident", "printer_compatibility": "VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Ch4rlesB/V0_Handles_Slim", "title": "V0 Handles Slim", "creator": "Ch4rlesB", "description": "Simple and slim handles for the V0", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Chaoticlab/Tool_free_tensioner", "title": "Tool_free_tensioner", "creator": "Chaoticlab", "description": "Tool-free tensioner for Z-Axis", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "ChenTheDesignMaker/Z_Belt_Clip", "title": "Z Belt Clip", "creator": "ChenTheDesignMaker", "description": "Simple clip to keep extra Z belts clean and away from panels", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "D4rkCelerity/Raspberry_Pi_Zero_Bracket", "title": "Raspberry Pi Zero Bracket", "creator": "D4rkCelerity", "description": "Modified version of Trident RPi bracket to fit the smaller RPi Zero", "printer_compatibility": "V0.2, V1.8, V2.4, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "DC67/plug_panel_schaffner", "title": "Plug Panel Mod for Schaffner...", "creator": "DC67", "description": "A modified plug panel for the Power Entry Connector Schaffner...", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "DaGlo/Voron_V0_Duet_2_WiFi_Mounting_Brackets", "title": "V0.1 Duet 2 Wifi mounting brackets", "creator": "DaGlo", "description": "Voron 0.1 Mounting brackets with/without RPi 4", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "DaGlo/Voron_V0_MW_PS_Bracket", "title": "Voron V0 Mean Well power supply...", "creator": "DaGlo", "description": "Voron V0 Mean Well power supply bracket (Funssor Kit)", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "DaGlo/Voron_V0_SSR_Mount", "title": "Voron V0 SSR Mount", "creator": "DaGlo", "description": "Voron V0 SSR Mount for the bottom", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "DaGrooch13/Tophat_Exhaust_Filter", "title": "Tophat Exhaust Filter V0", "creator": "DaGrooch13", "description": "Activated charcoal exhaust filter with HEPA that replaces the rear...", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "DaStivi/the_Cephalopods_limb", "title": "The Cephalopod limb (BTT Octopus...", "creator": "DaStivi", "description": "An alternative Din rail mount for BTT Octopus (PRO) boards", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Dan88/V0skirt", "title": "V0 one-part Skirts", "creator": "Dan88", "description": "One part Skirts for the V0", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Daten/Voron_2.4_Revo_Nozzle_Holder", "title": "Revo hotend skirt case", "creator": "Daten", "description": "A skirt case for the Revo hotends to reside R1 and R2", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "DerekBackus/LED_Holder", "title": "LED Strip Holder", "creator": "DerekBackus", "description": "Simple bracket to mount an LED strip", "printer_compatibility": "", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "DerekBackus/Right_Skirt_Switch", "title": "Trident Right Skirt Switch", "creator": "DerekBackus", "description": "Moves power switch to right front skirt on the Trident", "printer_compatibility": "", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Derpimus/Block_handle_v0.1", "title": "V0.1 Block Handle", "creator": "Derpimus", "description": "V0.1 Block Style Handle", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "DorjeDorf/Duet_3_3HC_Din_Bracket", "title": "Duet 3 3HC Din Bracket", "creator": "DorjeDorf", "description": "V2.4 Duet 3 3HC Din Bracket", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "DorjeDorf/Duet_3_6HC_Din_Bracket", "title": "Duet 3 6HC Din Bracket", "creator": "DorjeDorf", "description": "V2.4 Duet 3 6HC Din Bracket", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Dr-Info/V2.4r2_Z-Drive_Motor_Tensioner_Mod_Rear_Skirts", "title": "V2.4 Rear Skirt Mod for Z-Drive...", "creator": "Dr-Info", "description": "This mod enables the you to utilize the rear skirts, power and...", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Dr-Info/corner_cable_cover_with_drop_down_holes", "title": "Corner Cable Cover with Drop Holes", "creator": "Dr-Info", "description": "Corner cable cover around Z-idler with drop holes near z frame and...", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "DrGhetto/GhettoPanels", "title": "Ghetto Panels", "creator": "DrGhetto", "description": "Printed panels for the Voron Zero", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "ElPoPo/RemovableDoors", "title": "Removable Doors", "creator": "ElPoPo", "description": "New hinge to easily remove the door and have a wide opening V2.x", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Electroleon/U2C_Mounting", "title": "U2C Mounting", "creator": "Electroleon", "description": "Bigtreetech U2C CAN Interface mounting bracket", "printer_compatibility": "V0.2, V1.8, V2.4, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Ellis/15x15_Drag_Chain_End", "title": "15x15 Drag Chain End", "creator": "Ellis", "description": "15x15 drag chain end piece", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Ellis/Badge_Retractor_Mount", "title": "Badge Retractor Mount", "creator": "Ellis", "description": "Extrusion mount for badge retractor to keep bowden tube out of the...", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Ellis/Bed_Fans", "title": "Bed Fans", "creator": "Ellis", "description": "Bed fan control macros and 5015 bed fan mounts", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Ellis/Short_Z_Joints", "title": "Short Z Joints", "creator": "Ellis", "description": "Shorter Z joints for the v2.4", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Ellis/Single_MGN9H_Carriage", "title": "Single MGN9H Carriage", "creator": "Ellis", "description": "Single MGN9H toolhead carriage with toolhead x endstop support (for...", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Empusas/BTT_Filament_Motion_Sensor_Mount", "title": "Mounts for BTT Filament Motion...", "creator": "Empusas", "description": "Mounts for Big Tree Tech Smart Filament Motion Sensor", "printer_compatibility": "V0.2, V1.8, V2.4, VSW", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Empusas/PowerSkirt_FN284-10-06", "title": "Power Skirt 2.x FN284-10-06", "creator": "Empusas", "description": "Power Skirt for Schaffner FN284-10-06 V2.x", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Empusas/Terminal_Blocks_NC933_SPL-62", "title": "Mounts for Terminal Blocks NC933...", "creator": "Empusas", "description": "Mounts for Terminal Blocks NC933 and SPL-62 from AliExpress", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Fiction/C270_mount", "title": "C270 mount", "creator": "Fiction", "description": "Logitech C270 webcam front-centre mount", "printer_compatibility": "V2.4, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Fiction/Crossrail", "title": "Crossrail", "creator": "Fiction", "description": "Across-the-rails LRS-200-24 or RSP-200-24 mount using DRP-03 brackets", "printer_compatibility": "V2.4, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Fiction/Exhaust_cover", "title": "Exhaust_cover", "creator": "Fiction", "description": "Cover for exhaust cutout in back panel", "printer_compatibility": "V2.4, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Fiction/Exhaust_cover_SFS", "title": "Exhaust_cover_SFS", "creator": "Fiction", "description": "Exhaust cover and BTT Smart Filament Sensor mount", "printer_compatibility": "V2.4, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Fiction/LGX_Lite_toolhead_PCB_mount", "title": "LGX Lite toolhead PCB mount", "creator": "Fiction", "description": "Mount for Hartk's toolhead PCB(s) for LGX Lite", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "FreeformFez/FilteredPower", "title": "V1.8 Filtered Power Inlet", "creator": "FreeformFez", "description": "V1.6 Filtered Inlet and Rocker Switch for V1.8", "printer_compatibility": "V1.8", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "GSL12/pocketwatch_nema17", "title": "Pocketwatch Nema 17", "creator": "GSL12", "description": "Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe...", "printer_compatibility": "", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "GadgetAngel/Bed_Support_Alignment_Tools", "title": "Bed Support Extrusions Alignment...", "creator": "GadgetAngel", "description": "The bed support alignment tools will assist in helping align the...", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "GadgetAngel/Cricut_Voron_Logos", "title": "Cricut Voron Logos", "creator": "GadgetAngel", "description": "For any cutting machines or machines that rely on vector graphics...", "printer_compatibility": "V0.2, V2.4, VSW, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Galvanic/Bowden_Tube_Guide", "title": "Bowden Tube Guide", "creator": "Galvanic", "description": "Bowden tube guide and CANBUS wire support", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "GiulianoM/FlyF407ZG", "title": "Fly F407ZG Mount", "creator": "GiulianoM", "description": "Mount for the Fly F407ZG: https://github.com/FLYmaker/FLYF407ZG", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Gizzle/ender-3_pro_switchwire", "title": "Ender 3 and Ender 3 Pro...", "creator": "Gizzle", "description": "Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics...", "printer_compatibility": "VSW", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Hobson318/Belt_Tension_Wrench", "title": "Belt Tension Wrench", "creator": "Hobson318", "description": "Wrench for easier turning of the belt tension knobs on V0.1", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Hobson318/Klipper_Expander_Mount", "title": "Klipper Expander Mount", "creator": "Hobson318", "description": "Mounting brackets for the klipper expander using vhb tape or...", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Iakabos/C920_mount", "title": "c920 Mount", "creator": "Iakabos", "description": "Slim mount for logitech c920 webcam", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Iakabos/V0_beltchain", "title": "V0 beltchains", "creator": "Iakabos", "description": "Modified beltchain parts for V0 Z cables", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "JD/RefillPlease", "title": "V2.4 Filament runout sensor", "creator": "JD", "description": "Replace the 2.4 stock bowden tube holder and add a filament runout...", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "JJFX/CRTouch_Snap_Mount", "title": "V2.4 CR Touch Snap Mount", "creator": "JJFX", "description": "Mount to replace v2.4 (MGN9) probe with a Creality CR Touch", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "JNP/Back-Door", "title": "Back Door", "creator": "JNP", "description": "Door for easy hardware access", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "JNP/Deck_Panel_Rear", "title": "Deck Panel", "creator": "JNP", "description": "Covers the hotbed cables", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "JNP/Drawer", "title": "Drawer", "creator": "JNP", "description": "Drawer in four different versions", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "JNP/Front-Door", "title": "Front Door", "creator": "JNP", "description": "Door in a frame", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "JNP/HEPA-Filter", "title": "Hepa Filter", "creator": "JNP", "description": "Filter case with fan\u00b4s", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "JNP/Mid-Panel", "title": "Mid Panel", "creator": "JNP", "description": "Panel for SKR1.4/1.4 or SKR E3 mini mount", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "JNP/Neopixel-Y_Rails", "title": "Neopixel Case", "creator": "JNP", "description": "mounting for Neopixel strip with 8 LED\u00b4s", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "JNP/Side-Panels", "title": "Side Panels", "creator": "JNP", "description": "Panels with intergrated hinge", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Jasrags/sw_fee_slot_filament_passthrough", "title": "Feed slot with filament pass-...", "creator": "Jasrags", "description": "A feed slot with a filament pass-through", "printer_compatibility": "VSW", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "JeremyRuhland/V2.4_Plug_Panel_Generic_Combo", "title": "V2.4 Plug Panel Generic Combo", "creator": "JeremyRuhland", "description": "Skirt power panel for generic amazon plug/switch/fuse combo module,...", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Jon/1515_led_mount", "title": "1515 LED Mount", "creator": "Jon", "description": "Snap in 1515 Led mount for WS2812B", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Jon/V0.1_Z_Cover", "title": "Z Cover for v0.1", "creator": "Jon", "description": "A cover to stop things from dropping down the Z motor and...", "printer_compatibility": "V0.1", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Jon/adxl345_skirt_keystone", "title": "adxl345 skirt keystone", "creator": "Jon", "description": "Skirt keystone for ADXL345 using Microfit 3.0", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "JosAr/Klicky-Probe", "title": "Klicky Probe", "creator": "JosAr", "description": "Microswitch based inductive probe replacement", "printer_compatibility": "V0.2, V1.8, V2.4, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "KenadyDwag44/sw_lightbar", "title": "Switchwire Lightbar", "creator": "KenadyDwag44", "description": "A LED lightbar for switchwire", "printer_compatibility": "VSW", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "KevinAkaSam/VEFACH", "title": "VEFACH", "creator": "KevinAkaSam", "description": "Voron Exhaust Filter Inserts for Activated Coal + Hepa", "printer_compatibility": "V2.4, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "KiloQubit/V0_reverse_bowden_mount", "title": "V0 Reverse Bowden Mount", "creator": "KiloQubit", "description": "V0 reverse bowden mount", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts", "title": "V2.4 Z Chain Mounts for 3 Hole...", "creator": "KiloQubit", "description": "Z chain mounts for 3 hole generic chain", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "KiloQubit/trident_schurter_power_inlet", "title": "Trident Schurter Inlet Skirt", "creator": "KiloQubit", "description": "Trident inlet skirt for mounting a Schurter DD11.0124 or similar inlet", "printer_compatibility": "VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Koios/6mm_Glass", "title": "6mm Tempered Glass Mod", "creator": "Koios", "description": "Lock levers and rests for 6mm Tempered glass panels", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Koios/C920_Mount", "title": "C920 Low Profile Mount", "creator": "Koios", "description": "Low profile mount for a C920 Webcam", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Koios/LED_Mounts", "title": "LED Bar Mounts", "creator": "Koios", "description": "Low profile mount for led bar lights", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Koios/V0_C920_Tophat_Mount", "title": "V0 C920 Tophat Mount", "creator": "Koios", "description": "Mounting bracket for a Logitech C920 on the tophat", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Kosh42EFG/kirigami_bed_front", "title": "Kirigami bed front", "creator": "Kosh42EFG", "description": "Printed bed front for kirigami folded metal bed mount with Voron logo.", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Kruppes/Closed_Bottom", "title": "Encosed Bottom", "creator": "Kruppes", "description": "Modified printed parts and panel to fully enclose V0.", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Kruppes/Deck_Panel_inserts_logo", "title": "V0 Printed Deck with inserts", "creator": "Kruppes", "description": "Electronics Deck Panel using brass heat inserts. Optional with...", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Kruppes/Tension_Meter", "title": "Belt Tension Meter", "creator": "Kruppes", "description": "Print in place tension meter to easily tighten multiple belts to...", "printer_compatibility": "V0.2, V1.8, V2.4, VSW", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Kyleisah/CableGator", "title": "CableGator Cable Comb", "creator": "Kyleisah", "description": "A cable comb for simplifying and tidying wire harnesses for...", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "LJ/Scrubby", "title": "Scrubby", "creator": "LJ", "description": "Easy to use filament dust filter", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Le0n/Magnetic_Panels_with_Magnet_Inserts", "title": "Magnetic panels with Magnet Inserts", "creator": "Le0n", "description": "Magnetic panel mounts with magnets inserted into frame slots.", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "LoCoCNC/3mm_tophat_panel_parts", "title": "3mm Top Hat Panels Clips", "creator": "LoCoCNC", "description": "Required to use the 3mm (1/8\") thick top hat panels for V0.1", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "LoCoCNC/MGN7H_Shims", "title": "MGN7H Shims", "creator": "LoCoCNC", "description": "Shims for making bearing cartridges coplanar", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "LoCoCNC/Mosquito_PTFE_Cutting_Jig", "title": "Mosquito PTFE 15mm Tube Cutting Jig", "creator": "LoCoCNC", "description": "Tool to precicely cut 15mm PTFE Tube", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "LoCoCNC/Strain_Relief_w_Microfit", "title": "Strain Relief w/ 10 Pin Microfit", "creator": "LoCoCNC", "description": "Strain Relief with 10 pin Microfit connector", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "LoCoCNC/ssr_strap", "title": "SSR Mounting Strap", "creator": "LoCoCNC", "description": "Mounting Strap for SSR on 1515 Extrusions", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "LoCoCNC/wire_grommets", "title": "V2.4 Bed Wiring Grommet", "creator": "LoCoCNC", "description": "Safely capture your bed wires thru the bottom panel", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "LoganFraser/ComboInlet", "title": "ComboInlet", "creator": "LoganFraser", "description": "Skirt pieces for Trident, 2.4 and 2.4r2 for combo inlets in 2 sizes.", "printer_compatibility": "V2.4, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "LoganFraser/HorseshoeSpoolHolder", "title": "HorseshoeSpoolHolder", "creator": "LoganFraser", "description": "Horseshoe Spool Holder - mounts internally for Trident, or...", "printer_compatibility": "V0.2, V1.8, V2.4, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "LoganFraser/PiPlate", "title": "PiPlate", "creator": "LoganFraser", "description": "PiPlate - Raspberry Pi3,4 mounting plate and Skirt Mod for...", "printer_compatibility": "V2.4, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "LoganFraser/TridentInvertedElectronics", "title": "Trident Inverted Electronics", "creator": "LoganFraser", "description": "Flip the Trident electronics bay for top access.", "printer_compatibility": "VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "LoganFraser/WagoMounts", "title": "WagoMounts", "creator": "LoganFraser", "description": "Wago Mounts for Din Rail or 2020 Extrusion mounting.", "printer_compatibility": "V2.4, VSW, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Long/Mantis_Dual_5015", "title": "Mantis Dual 5015 Toolhead", "creator": "Long", "description": "MGN12 Dual 5015 Toolhead for 2.4 & 1.8", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Lukas/SSD1306_Case_Front_Cover", "title": "SSD1306 Case Front Cover", "creator": "Lukas", "description": "SSD1306 Mount replacement for Mini12864", "printer_compatibility": "V2.4, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "MCMBen/Voron0_Block_and_Tackle_Z_Belt", "title": "Voron0 Block & Tackle Z Belt", "creator": "MCMBen", "description": "A block & tackle belted Z solution using NEMA14. Ratios from 5:1 to...", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "MSA/V0-Belt-tension-helper", "title": "Belt tension helper", "creator": "MSA", "description": "Belt tension helper for V0.1", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "MSiemons/TophatHingeV0.1", "title": "Tophat Hinge V0", "creator": "MSiemons", "description": "Simple hinge for V0 Tophat", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Mac10goesBRRRT/BTT_PiTFT", "title": "PiTFT Mount", "creator": "Mac10goesBRRRT", "description": "Mount for the BTT PiTFT Touchscreen", "printer_compatibility": "V2.4, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Majarspeed/Hartk_Mount_Galileo", "title": "Hartk board mount galileo", "creator": "Majarspeed", "description": "It hangs stuff on your tool", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "MakeALeft/Switchwire_Front_Grill", "title": "Switchwire Clean Center Grill", "creator": "MakeALeft", "description": "Removed magnet holders on center panel for cleaner look", "printer_compatibility": "", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "MasturMynd/Stealth_Zero", "title": "Stealth Zero", "creator": "MasturMynd", "description": "A low poly gantry with front tensioners and optional front mounted...", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "MathematicalPotato/v0.1_belted_z_drive", "title": "V0.1 Belted Z Drive", "creator": "MathematicalPotato", "description": "Conversion to a belted Z axis for the V0.1 adapted from...", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Maverick/MiniSB_LGX_Lite", "title": "MiniSB_LGXL", "creator": "Maverick", "description": "A Bondtech LGX Lite variant of the MiniSB", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Maverick/MiniSB_Rapido", "title": "MiniSB_Rapido", "creator": "Maverick", "description": "Modified MiniSB to use a Rapido hotend", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Maverick/MiniSB_Sharkfin", "title": "MiniSB_Sharkfin", "creator": "Maverick", "description": "Modified MiniSB to use a Sharkfin Extruder", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Maverick/V0.2_Handles", "title": "V0.2 Handles", "creator": "Maverick", "description": "Add handles to the extrusion tophat", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Maverick/V0.2_Stealth_Skirts", "title": "V0.2 Stealth Skirts", "creator": "Maverick", "description": "Juiced up skirts for the V0.2", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Mckurt/Switchwire_Y_Belt_Tensioner", "title": "Switchwire Y Belt Tensioner", "creator": "Mckurt", "description": "Switchwie Y axis Belt Tensioner", "printer_compatibility": "VSW", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Mellow/V0_Fly-Gemini", "title": "V0 Fly-Gemini", "creator": "Mellow", "description": "Fly-Gemini adapted model for V0", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail", "title": "LGX mount for V0.1 with 2nd X rail", "creator": "MikesMods", "description": "V0.1 mod for mounting Bondtech LGX extruder with addition of 2nd X...", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Minsekt/Rear_Umbilical", "title": "Rear Umbilical", "creator": "Minsekt", "description": "Rear Umbilical mounting solution including a relocated Y-Endstop", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "MrBean66/SKR_PRO_Mount", "title": "SKR Pro DIN Mount", "creator": "MrBean66", "description": "Simple mod to mount the SKR Pro board from BTT to a DIN rails.", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "MrDespair/MiniAB_Pinda", "title": "MiniAB Pinda Probe Mount", "creator": "MrDespair", "description": "Replacement MiniAB Cowling to add a mount for a Pinda style probe.", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Mrgl-Mrgl/LGX_Lite_Mount", "title": "LGX Lite Mount", "creator": "Mrgl-Mrgl", "description": "a mount for the LGX Lite", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Nashuar/V0_Dragon_ToolheadStockScrews", "title": "V0 Dragon Toolhead M2.5x8", "creator": "Nashuar", "description": "This toolhead uses the stock M2.5 screw that came with the dragon...", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Nomsplease/60mm_Shaft_Jig", "title": "60mm Shaft Jig", "creator": "Nomsplease", "description": "Simple jig for cutting and grinding 60mm Z shafts", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Nomsplease/V0_Mods/duet_wifi_mount", "title": "Duet Wifi Mount", "creator": "Nomsplease", "description": "Duet wifi mount in pocketwatch location", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Nomsplease/V0_Mods/led_mounts", "title": "LED Mounts", "creator": "Nomsplease", "description": "Basic LED mounts for 10 and 12mm strips", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Nomsplease/V0_Mods/panel_mounts", "title": "Remixed Panel Mounts", "creator": "Nomsplease", "description": "Remixed rear bottom panel mounts with stop", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Nomsplease/V0_Mods/pi_zero_camera_mount", "title": "Pi Cam/ZeroW Mount", "creator": "Nomsplease", "description": "Mount for pi camera and ZeroW", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Nomsplease/V0_Mods/pocket_watch_rear_relocation", "title": "Pocket Watch Rear Reolcation...", "creator": "Nomsplease", "description": "Pocket watch rear reolcation bracket", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Oakman/BTT_24V_UPS_Metal_DIN_Mount", "title": "BTT 24V UPS Metal DIN Mount", "creator": "Oakman", "description": "Adapter to use a metal DIN mount for the BTT 24V UPS", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Oakman/FYSETC_Spider_Metal_DIN_Mount", "title": "FYSETC Spider Metal DIN Mount", "creator": "Oakman", "description": "Use a metal DIN mount for your FYSETC Spider", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Oakman/RPI_Metal_DIN_Mount", "title": "RPI Metal DIN Mount", "creator": "Oakman", "description": "Adapter for metal DIN mounting the Raspberry Pi", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "OboMaker3D/C17-EXT", "title": "C17-EXT Filter HEPA Carbon", "creator": "OboMaker3D", "description": "Replaces standard filter with new HEPA Crabon and 120mm fan V1.1", "printer_compatibility": "V2.4, VSW, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "OboMaker3D/C17-EXT-CARTRIDGE", "title": "C17-EXT-CARTRIDGE for C17-EXT...", "creator": "OboMaker3D", "description": "Alternative to a commercial cartridge for the C17-EXT filter", "printer_compatibility": "V2.4, VSW, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Phalanx/Other-V2-Idlers", "title": "\"Other\" Idlers Mod", "creator": "Phalanx", "description": "Allow usage of wider toolheads on the V2", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch", "title": "V0.1 Z nozzle endstop switch", "creator": "Polar-Ted", "description": "Sexbolt style switch for V0", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Polar-Ted/V0_Two_Piece_Back_Panel", "title": "V0.1 Two Piece Back Panel", "creator": "Polar-Ted", "description": "Vented 2 piece back panel for V0", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Polared/Power_Inlet_w_Keystone_Insert", "title": "Power Inlet with Keystone Insert", "creator": "Polared", "description": "Voron 0.1 Power inlet with keystone insert slot", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Printopal/Magnetic_top_panel", "title": "Magnetic top panel", "creator": "Printopal", "description": "Top panel with magnets allows for quick installation and removal", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "PsychoShaft/C92X_PsycHoShafts_Mount", "title": "C92X_PsycHoShafts_Mount", "creator": "PsychoShaft", "description": "2020 Top profile 920 camera mount / 2 point axis pivot", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "QuackProfit/V0-Adafruit-Y_Rails", "title": "V0 Adafruit NeoPixel LED Mounts", "creator": "QuackProfit", "description": "Mount Adafruit PCB NeoPixel Sticks on the V0 Y-rail extrusions", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Rhastlyn/60mmFanCover", "title": "60mm Fan Cover", "creator": "Rhastlyn", "description": "A easy to install cover for spec 60mm fans originally designed for...", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Rhastlyn/WansviewCameraMount", "title": "Wansview 1080p Camera Mount", "creator": "Rhastlyn", "description": "A camera mount that replaces the OEM part to allow the camera to be...", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "RockNLol/RockNRoll", "title": "RockNRoll", "creator": "RockNLol", "description": "Rockers to roll the printer on its back for easier access to the...", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "ScramblerUSA/SideSkirtPowerSwitch", "title": "Side Skirt Power Switch", "creator": "ScramblerUSA", "description": "Skirt-mounted rocker switch for easy access for Voron 2.4", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "See1807/Voron_V0_Exhaust_and_LED_Mod", "title": "TopHat Exhaust and LED Light", "creator": "See1807", "description": "A mount for 10mm LED strips and Exhaust for Voron V0", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Shiftingtech/Trident_dual_power_switch", "title": "Trident Dual Power Switch", "creator": "Shiftingtech", "description": "A replacement skirt, allowing 2 power switches", "printer_compatibility": "VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "ShinyPants/Orange_Pi_3_LTS_DIN", "title": "OrangePi 3 LTS DIN Rail bracket", "creator": "ShinyPants", "description": "A DIN rail mount for OrangePi LTS 3", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Shteeeeeve/V01-LED-Tophat", "title": "V0.1 LED Tophat", "creator": "Shteeeeeve", "description": "V0.1 LED Tophat w/ 24V LED Lightstrip", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Slidr/PanzerBalls2.4", "title": "PanzerBalls 2.4", "creator": "Slidr", "description": "Squash Ball Feet for V2.4", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Slidr/PanzerChain2.4", "title": "PanzerChain 2.4", "creator": "Slidr", "description": "Energychain for V2.4", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Spaghetti-Bolognese/LCD_case_mod", "title": "LCD Case Mod", "creator": "Spaghetti-Bolognese", "description": "Improvements to the V2.4 mini12864 LCD case inc E-stop button cover", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Spaghetti-Bolognese/Z_drive_motor_mount", "title": "Simplified Z Drive Motor Mount", "creator": "Spaghetti-Bolognese", "description": "Z drive motor mount bracket mod to improve pulley to belt alignment", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "StvPtrsn/320mm_Build", "title": "Skirts for a 320mm Build", "creator": "StvPtrsn", "description": "Skirts for a 320mm build", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "StvPtrsn/Keystone_Jack_Filtered_Mains_Panel", "title": "Keystone Jack for Filtered Mains...", "creator": "StvPtrsn", "description": "Add a keystone jack to your filtered mains plug panel", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "StvPtrsn/Parts_Jigs_and_Mods", "title": "Parts_Jigs and Mods", "creator": "StvPtrsn", "description": "Parts, Jigs and modifications I use for my builds", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "StvPtrsn/Side_Fan_Support_No_Tape", "title": "Side Fan Support, No Tape", "creator": "StvPtrsn", "description": "Mount the 60mm side fans and inserts without tape", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Takuya/USBCameraMount", "title": "WANSVIEW USB Camera Mount", "creator": "Takuya", "description": "WANSVIEW 1080p Camera Mount for Voron 2.4", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "TheSquiffy/V0_Belts_holder", "title": "V0 Belts holder", "creator": "TheSquiffy", "description": "V0 Belts Holder", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "TiagoBarata/Logitech_C270_Mount", "title": "Logitech C270 Mount", "creator": "TiagoBarata", "description": "Logitech C270 Top Center Mount", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Tircown/DIN_mount_RS-15-5", "title": "DIN mount RS-15-5 PSU", "creator": "Tircown", "description": "A DIN mount for the RS-15-5", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Tircown/Display_mount_5inch", "title": "Display mount 5\"", "creator": "Tircown", "description": "Tiltable mount for a 5\" tactile display", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Tircown/Raspberry_plug_panel", "title": "Raspberry in plug panel", "creator": "Tircown", "description": "Raspberry mount vertically in the plug panel, allow easy access to...", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Tircown/V01_skirt_buttons", "title": "V0.1 Skirt buttons", "creator": "Tircown", "description": "Buttons for V0.1 spec skirts", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Triano/Ender_3Pro_Switchwire", "title": "Ender 3 Pro or V2 to Switchwire Mod", "creator": "Triano", "description": "Convesion of an Ender 3 Pro or V2 to a Switchwire", "printer_compatibility": "VSW", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Ultrawaffles/Ender_3_to_SW", "title": "Ender 3 to SW conversion", "creator": "Ultrawaffles", "description": "A conversion mod for the ender 3 to switchwire. Designed to allow...", "printer_compatibility": "VSW", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "VinnyCordeiro/RGB_LED_grid_for_SB", "title": "RGB LED grid for Stealthburner", "creator": "VinnyCordeiro", "description": "A small RGB LED grid for Stealthburner's logo", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Weaslus/Electronics-Bay-Seperator", "title": "Electronics Bay and Enclosure...", "creator": "Weaslus", "description": "Better enclose chamber and keep heat from electronics", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "ZZP8202/Pull-out_electrical_store", "title": "Pull-out electrical store", "creator": "ZZP8202", "description": "Voron 2.4 Pull-out electrical store\uff08350mm only\uff09", "printer_compatibility": "V2.4", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Zen3D/V0_1515_T-nut", "title": "V0 1515 T-nut", "creator": "Zen3D", "description": "M3 square and hex nuts for Voron0 1515 frame", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Zen3D/V0_Handle", "title": "V0 Handle", "creator": "Zen3D", "description": "Voron0 Handle for 3mm panels", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "Zen3D/V0_MidPanel_HexPattern", "title": "V0 MidPanel HexPattern", "creator": "Zen3D", "description": "Voron0 MidPanel with Hex pattern and Wire cover", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "Zen3D/V0_Skirt", "title": "V0 Skirt set", "creator": "Zen3D", "description": "SSR, PowerSwitch, Adxl, Nameplate and color change printing", "printer_compatibility": "V0.2", "last_changed": "2023-07-14 13:24:54 +0000"}, {"path": "aTinyShellScript/RS_PSU_DIN_Brackets", "title": "RS PSU DIN Bracket", "creator": "aTinyShellScript", "description": "DIN brackets for MeanWell RS PSUs with 80mm spacing.", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "ademuri/Lights_Camera_Voron", "title": "Lights, Camera, Voron", "creator": "ademuri", "description": "A mount for LED strips and Picam for the V0.1", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "aeresov/MeanWell_UHP_DIN_mount", "title": "MeanWell UHP-xxx DIN mount", "creator": "aeresov", "description": "A bracket for MeanWell UHP series PSU (200, 350 and 500) to mount...", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "aeresov/Raspberry_Pi_DIN_mount", "title": "Raspberry Pi DIN mount", "creator": "aeresov", "description": "A bracket for Raspberry Pi 3/4 to mount it onto DIN rail, along or...", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "aeresov/SKR_DIN_mount", "title": "SKR 1.3/1.4 DIN mount", "creator": "aeresov", "description": "A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or...", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "aeresov/TL_filament_sensor_bracket", "title": "TL filament sensor bracket", "creator": "aeresov", "description": "A bracket for TL filament sensor to mount near stock spool holder.", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "aeresov/cable_tie_DIN_mount", "title": "cable tie DIN mount", "creator": "aeresov", "description": "A bracket for cable ties to route cables across DIN rails.", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "al3ph/analog_timer_mount", "title": "Analog Timer Mount", "creator": "al3ph", "description": "A skirt mount for analog timer", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "al3ph/filament_runout", "title": "Filament Runout Sensor", "creator": "al3ph", "description": "A simple filament runout sensor", "printer_compatibility": "V0.2, V1.8, V2.4, VSW", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "al3ph/led_mount", "title": "LED Mount", "creator": "al3ph", "description": "A mount for 10mm LED WS2812 strips", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "al3ph/pl05_mount", "title": "PL05 Sensor Mount", "creator": "al3ph", "description": "A mount PL05 inductive sensor", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "alanho/BTT_PITFT50_v2_Mount", "title": "BTT PITFT50 v2 Mount", "creator": "alanho", "description": "A mount for the BTT PITFT50 v2 Touch Display", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "albert/IKEA_Dioder_Led_Mount", "title": "IKEA Dioder Led Mount", "creator": "albert", "description": "A mount for the IKEA Dioder LED strip", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "antoinecellerier/ds18b20-sensor-mount", "title": "DS18B20 Sensor Mount", "creator": "antoinecellerier", "description": "DS18B20 temperature sensor mount", "printer_compatibility": "V0.2", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "ardichoke/v0-long-thumb-nut", "title": "V0 Long Thumb Nut", "creator": "ardichoke", "description": "Taller thumb nuts for V0 bed", "printer_compatibility": "V0.2", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "arkeet/dti-mount", "title": "Dial test indicator mount", "creator": "arkeet", "description": "A toolhead mount for a dial test indicator, where the tip is...", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "arkeet/magnet-fan-cover", "title": "Magnetic hotend fan cover", "creator": "arkeet", "description": "A replacement hotend fan cover, held with magnets instead of screws.", "printer_compatibility": "V1.8, V2.4, VSW", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "arkeet/mgn12", "title": "MGN12 X-axis", "creator": "arkeet", "description": "Replaces the dual MGN9H rails with a single MGN12H.", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "arkeet/v0-dc-inlet", "title": "V0 DC inlet", "creator": "arkeet", "description": "Skirt inlet for external 24V DC power supply.", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "baccula/revo_skirt_nozzle_holder", "title": "Revo Nozzle Holder for v2.4 350", "creator": "baccula", "description": "A remix of Andre's design allowing for skirt storage of 4 E3D Revo...", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "beaugalbraith/Nova_Printhead", "title": "Nova Printhead", "creator": "beaugalbraith", "description": "Use Nova Hotend with Afterburner", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "bobbleheed/Filament_Runout", "title": "Filament Runout Sensor", "creator": "bobbleheed", "description": "Filament runout sensor that replaces the stock bowden retainer", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "bobbleheed/Magnetic_Panels", "title": "Magnetic Panels", "creator": "bobbleheed", "description": "Magnetic clips to allow for easy removal and installation of panels", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "btp/Galileo_Switchwire_Chain_Mount", "title": "Galileo chain mount (befenybay)", "creator": "btp", "description": "Modified chain mount position to cater for difference with Galileo...", "printer_compatibility": "VSW", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "buzzdalf/connector_cover", "title": "v1.8/2.4 Afterburner connector...", "creator": "buzzdalf", "description": "v1.8/2.4 Connector cover for 42STH20-1004AS", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "buzzdalf/ender_switchwire_taller_z", "title": "Ender 3 Switchwire Taller Z Mod", "creator": "buzzdalf", "description": "Taller Z Mod", "printer_compatibility": "VSW", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "buzzdalf/ytension", "title": "Ender 3 Switchwire Y Tensioner Mod", "creator": "buzzdalf", "description": "Y Tension Mod", "printer_compatibility": "VSW", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "bythorsthunder/MGN9_Backers", "title": "MGN9 Backers Idlers", "creator": "bythorsthunder", "description": "New idler uppers for MGN9 Extrusion backers", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "bythorsthunder/Stealthburner_Rapido_Uhf", "title": "Stealthburner Rapido UHF", "creator": "bythorsthunder", "description": "Stealthburner mod for Rapido UHF", "printer_compatibility": "V2.4, VSW, VT", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "chirpy/NozzleWiper", "title": "V0.1 Nozzle Wiper", "creator": "chirpy", "description": "Servo powered nozzle wiper and purge bucket", "printer_compatibility": "V0.2", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "chirpy/RunoutUnklicky", "title": "Runout UnKlicky Sensor", "creator": "chirpy", "description": "Runout UnKlicky Sensor is a filament runout sensor with mounts for...", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "chirpy/TipTophat", "title": "V0.1 Raised Tophat", "creator": "chirpy", "description": "Alternative Tophat design that uses stock panels and raises height...", "printer_compatibility": "V0.2", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "chri.kai.in/20x20mm_Profile_Covers", "title": "20x20mm Profile Covers", "creator": "chri.kai.in", "description": "Provide overlapping and flush slot covers for 20x20mm slot6...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "chri.kai.in/Angry_CAM_USB", "title": "Angry CAM USB", "creator": "chri.kai.in", "description": "Housing for small USB camera module, allowing mounting to gantry or...", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "chri.kai.in/Exhaust_Adapter_100mm", "title": "Exhaust Adapter 100mm", "creator": "chri.kai.in", "description": "Replace 60mm exhaust fan with 100mm ventilation system adapter", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "chrisrgonzales/270_degree_hinge", "title": "270\u00b0 Front Panel Hinge", "creator": "chrisrgonzales", "description": "Hinges that have 270\u00b0 of swivel, parametric CAD included", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "christophmueller/Phaetus_Dragonfly_BMO_Afterburner", "title": "Phaetus and Zodiac Dragonfly BMO...", "creator": "christophmueller", "description": "Covers both the original Phaetus variant as well as the Zodiac one.", "printer_compatibility": "V1.8, V2.4, VSW", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "claytono/2.4-extrusion-jig", "title": "Voron 2.4 Extrusion Jig", "creator": "claytono", "description": "A jig help align extrusions to get a properly square frame", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "claytono/fysetc-s6-v2-mount", "title": "Fysetc S6 V2 Mount", "creator": "claytono", "description": "DIN Mount for the Fysetc S6 V2 controller", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "claytono/v0-zip-tie-skirts", "title": "V0 Zip Tie Skirts", "creator": "claytono", "description": "V0 skirts with small loops added along the top to allow zip tyiing...", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "clee/Monster8_heatsert_mount", "title": "Monster8 DIN Rail Mounts", "creator": "clee", "description": "DIN mount for Makerbase Monster8 V1/V2 controller", "printer_compatibility": "V2.4, VT", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "cmrny/v01_motor_panel_no_rub", "title": "V0.1 Motor Panel Modification", "creator": "cmrny", "description": "V0.1 Motor panel modification to keep umbilical and bowden tube...", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "conqueror433/Voron_Parts_Logo", "title": "Voron Parts Logo", "creator": "conqueror433", "description": "Voron Parts Logo for your back panels, 3D Print or Laser Cut", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "conqueror433/Voron_V0.1_Parts_Logo", "title": "Voron V0.1 Parts Logo", "creator": "conqueror433", "description": "Voron Parts Logo for your V0 deck panel", "printer_compatibility": "V0.2", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "consibonsi/Y-Mod_SW_9mm", "title": "Y-Mod SW 9mm", "creator": "consibonsi", "description": "9mm Y belt mod for SW", "printer_compatibility": "VSW", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "csch0/SW_FanMount_No_Tape", "title": "SW Fan Mount No Tape", "creator": "csch0", "description": "60x20 Fan Mount for SW without tape", "printer_compatibility": "VSW", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "d3nny/mains_plug_panel_for_RND_165-00057", "title": "Filtered Power Plug with...", "creator": "d3nny", "description": "Filtered Power Plug for RND 165-00057 and CAT6-Plug", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "davidauvergne/Center_cable_management_duct", "title": "Center_cable_management_duct", "creator": "davidauvergne", "description": "Mod for a centered cable management", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "dePrintinator/HEPA_Filter_Exhaust", "title": "HEPA Exhaust", "creator": "dePrintinator", "description": "HEPA filter chamber exhaust replacement.", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "deepfriedheroin/v0_bed_wagos", "title": "v0 Wago Bed Mounts", "creator": "deepfriedheroin", "description": "Easy to install Wago mounts for the v0", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "deepfriedheroin/v0_power_wagos", "title": "v0 Power Wagos", "creator": "deepfriedheroin", "description": "Easy to install Wago mounts for v0 mains", "printer_compatibility": "V0.2", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "deepfriedheroin/v2_bed_wagos", "title": "V2 Bed Wagos", "creator": "deepfriedheroin", "description": "Wire management for the v2 bed", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "doubletrouble/V0_Skirt_Mod", "title": "V0 Skirt Mod", "creator": "doubletrouble", "description": "V0 Skirt Mod", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "eamars/stealthburner_crazy_dragon_toolhead", "title": "Stealthburner (RC1) Dragon...", "creator": "eamars", "description": "The Stealthburner toolhead mount for Mellow Crazy, TriangleLab...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "eddie/LED_Bar_Clip", "title": "LED Bar Clip", "creator": "eddie", "description": "Modular LED Clip for mounting LED Strip to 2020 Extrusions", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "eddie/V1.8_12mm_Z_Mod", "title": "V1.8 12mm Z Mod", "creator": "eddie", "description": "Add V1.8 option for 12mm Z rods", "printer_compatibility": "V1.8", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "edwardyeeks/Tridentified_V2.4_Power_Inlet", "title": "Tridentified V2.4 Power Inlet", "creator": "edwardyeeks", "description": "Trident style side power inlet for V2.4 using Z Drive Motor...", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "elcrni/Trident_Internal_Spool_Holder", "title": "Trident Internal Spool Holder", "creator": "elcrni", "description": "Internal spool holder for 300 and 350 Tridents. Supports full size...", "printer_compatibility": "VT", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "elcrni/V2.4-Trident-Spool-Holders", "title": "V.24/Trident Spool Holder", "creator": "elcrni", "description": "Spool holder that mounts on top for \"too close to the wall\" printers", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "evandepol/Crydom-GN-Guard", "title": "Crydom GN Terminal Guard", "creator": "evandepol", "description": "A simple safety guard for the terminals on a Crydom GN SSR", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "evandepol/Voron2.4-Cable-clamps", "title": "Voron 2.4 cable clamps", "creator": "evandepol", "description": "A set of 2020-mounted cable guards to organize and dress the wiring...", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "falo/lgx_lite_side_can", "title": "LGX Lite CAN Side Mount", "creator": "falo", "description": "A side mounting for a CAN board (Huvud/SHT42) to the LGX Lite", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "falo/magnetic_grill_cover", "title": "Magnetic Exhaust Grill Cover", "creator": "falo", "description": "A magnetic cover to seal the filtered exhaust", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "falo/toolhead_pcb_to_can", "title": "Toolhead PCB to CAN Mount Adaptor", "creator": "falo", "description": "A mount to enable side mounting of a CAN board (Huvud/SHT42) in...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "filotto78/6mm_slot_cover", "title": "6mm slot cover", "creator": "filotto78", "description": "Simple cover for extrusion with 6mm slot width", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "gamebofh/door-panels", "title": "Laser cut door panels", "creator": "gamebofh", "description": "Files to allow you to create laser cut door panels with some...", "printer_compatibility": "VSW", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "gauravmm/crazy_mozzie_cw2", "title": "Crazy Mozzie HF toolhead SB+CW2", "creator": "gauravmm", "description": "Toolhead for Crazy Mozzie HF, compatible with Stealthburner and...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "gen2eng/z_carriage_stop_pass_through", "title": "Switchwire LED wire pass through", "creator": "gen2eng", "description": "Z Carriage Stop modification that makes pass through of wires for...", "printer_compatibility": "VSW", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "geoffreyyoung/dual_rail_guide", "title": "Dual Rail Installation Guide", "creator": "geoffreyyoung", "description": "Rail installation guide that also works for the 2.4 dual rail...", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "geoffreyyoung/lgx", "title": "LGX Info, Links, and Models", "creator": "geoffreyyoung", "description": "Useful information and models for using the Bondtech LGX extruder...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "gerritwellen/manta-m8p-bracket", "title": "Manta M8P Mount", "creator": "gerritwellen", "description": "Mounting Bracket for BTT Manta M8P", "printer_compatibility": "V2.4, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "golas/v0-extended-tophat-hinge", "title": "V0.1 Extended tophat hinge", "creator": "golas", "description": "Extended tophat for v0.1 with hinges (integrated or screwed ones).", "printer_compatibility": "V0.2", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "golas/v0-trident-skirt-mix", "title": "V0.1 Trident skirt remix with...", "creator": "golas", "description": "Trident style v0.1 skirt mix with 12864 Mini Lcd on front or plain...", "printer_compatibility": "V0.2", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "hartk1213/Voron0.2_2.8_WaveshareDisplay", "title": "Voron0.2 2.8 Waveshare Display", "creator": "hartk1213", "description": "2.8 Waveshare display for V0.2", "printer_compatibility": "V0.2", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "hartk1213/Voron0.2_Rear_Keystone_Skirt", "title": "Voron0.2 Rear Keystone Skirt", "creator": "hartk1213", "description": "Added keystone slot on rear skirt for V0.2", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "hartk1213/Voron0_C14Inlet", "title": "Voron0 C14Inlet", "creator": "hartk1213", "description": "Added a new Power inlet that uses a Fused C14 plug and switch that...", "printer_compatibility": "V0.1", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "hartk1213/Voron0_ExtendedLegs", "title": "Voron0 ExtendedLegs", "creator": "hartk1213", "description": "New extended legs to raise the printer up a tiny bit more", "printer_compatibility": "V0.1", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "hartk1213/Voron0_ExtrusionSkirt", "title": "Voron0 ExtrusionSkirt", "creator": "hartk1213", "description": "Created a new skirt design that uses 50mm extrusions as legs and it...", "printer_compatibility": "V0.1", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "hartk1213/Voron0_Hinged_Top_Hat", "title": "Voron0 Hinged Top Hat", "creator": "hartk1213", "description": "Created a new hinged top hat design for the V0 so it can fold away...", "printer_compatibility": "V0.1", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "hartk1213/Voron0_MGN9C_X_Axis", "title": "Voron0 MGN9C X Axis", "creator": "hartk1213", "description": "This mod, replaces the stock MGN7H for MGN9C on the V0", "printer_compatibility": "V0.1", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "hartk1213/Voron0_deck_panel_with_logo_and_VORON0", "title": "Voron0 deck panel", "creator": "hartk1213", "description": "Used @Kruppes blank deck panel to add the logo as well as the name...", "printer_compatibility": "V0.1", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "hartk1213/Voron0_display_dualcolor", "title": "Voron0 display dualcolor", "creator": "hartk1213", "description": "Added a dual color file for the Voron Display Front housing", "printer_compatibility": "V0.1", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "hartk1213/Voron2.4_GE5C", "title": "Voron2.4 GE5C", "creator": "hartk1213", "description": "This mod replaces the stack of printed z joints with a metal...", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "hartk1213/Voron2.4_SexBolt_ZEndstop", "title": "Voron2.4 SexBolt ZEndstop", "creator": "hartk1213", "description": "This mod replaces stock V2 Z endstop with a different style", "printer_compatibility": "V2.4, VT", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "hartk1213/Voron2.4_Trident_Pins_Mod", "title": "Voron2.4 and Trident Pins Mod", "creator": "hartk1213", "description": "This mod replaces all the M5 screws for all idlers/pulleys/bearings...", "printer_compatibility": "V2.4, VT", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "hartk1213/Voron2.4_Y_Endstop_Relocation", "title": "Voron2.4 Y Endstop Relocation", "creator": "hartk1213", "description": "This mod relocates the Y endstop to the top A drive piece", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "henrikssn/parametric_spool_holder", "title": "Parametric Spool Holder", "creator": "henrikssn", "description": "Spool holder where the length is a parameter.", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "henrikssn/plug_panel_generic", "title": "Plug Panel Mod for Generic...", "creator": "henrikssn", "description": "v2.4 plug panel for generic unfiltered modules with 66mm x 27mm...", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "hergtoler/exhaust_120mm_duct", "title": "Exhaust Housing for 120mm Fan...", "creator": "hergtoler", "description": "v2.4 Exhaust Housing for 120mm Fan and 4in Duct", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "hernsl/bottom_panel_mag_clip", "title": "Bottom Panel Mag Clip", "creator": "hernsl", "description": "v2.4 magnetic clips to retain bottom panel", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "hhammarstrand/afterburner_connector_cover_42STH20-1004AS", "title": "Afterburner connector cover for...", "creator": "hhammarstrand", "description": "Connector cover for 42STH20-1004AS", "printer_compatibility": "VSW", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "hijax_pl/corner_panel_clip", "title": "Corner panel clip", "creator": "hijax_pl", "description": "V2 panel corner frames using 3-way L brackets in the corners", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "hijax_pl/din_rail_mount", "title": "Din Rail mount", "creator": "hijax_pl", "description": "Adapter to attach DIN Rail to 2020 extrusion.", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "hijax_pl/ender_compatible_controller_mount", "title": "Controler Board adapters", "creator": "hijax_pl", "description": "DIN (rotated) and legacy adapters for boards like SKR mini E3.", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "hoschi/FYSETC_Spider_DIN_Mount", "title": "FYSETC Spider DIN Rail Mount", "creator": "hoschi", "description": "DIN rail mount for FYSETC Spider", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "hymness1/10x11mm_chain_VSW", "title": "10x11mm chain VSW", "creator": "hymness1", "description": "Printable and openable 10x11mm chain", "printer_compatibility": "V0.2, VSW", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "hymness1/Quickdraw_probe_Voron_Switchwire", "title": "Quickdraw probe Voron Switchwire", "creator": "hymness1", "description": "Detachable magnetic probe with docking system for VSW", "printer_compatibility": "VSW", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "iblue/TophatExtractor", "title": "V0.1 Tophat Extractor", "creator": "iblue", "description": "Tophat Extractor for the Voron V0.1 with activated charcoal and...", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "jappaj/FanSaver", "title": "V0.1 FanSaver", "creator": "jappaj", "description": "A printable fix for overheating V0.1 blower fans", "printer_compatibility": "V0.2", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "jasonc/Z_Idler_Shoulder_Bolt", "title": "V2.4 Z-Idler Shoulder Bolt Mod", "creator": "jasonc", "description": "Modification to the idler carriers to accept a 25mm shoulder bolt....", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "jatson/plug_panel_schurter", "title": "Plug panel mod for Schurter...", "creator": "jatson", "description": "A modified plug panel for Voron 2.4r1 with Schurter CD44.1101.151...", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "jaysuk/4.3_fly_screen_mount", "title": "4.3 Fly Screen Mount", "creator": "jaysuk", "description": "A mount for a 4.3\" Fly Screen", "printer_compatibility": "V0, V0.1", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "jeoje/4.3_Inch_Touchscreen_Mount", "title": "4.3\" Touchscreen Mount", "creator": "jeoje", "description": "Mounts a [Waveshare 4.3inch Capacitive Touch...", "printer_compatibility": "V2.4, VSW", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "jeoje/Molex_MLX_Microfit_Bed_Connector_Mount", "title": "Molex MLX and Microfit 3.0 Bed...", "creator": "jeoje", "description": "Solid mount your bed connectors", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "jeoje/Sturdy_Handles", "title": "Sturdy Handles", "creator": "jeoje", "description": "Modified v2.2 handles with no panel rest and with 4 anchor points", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "jeoje/Z_Chain_Guide_Thermistor_Mount", "title": "V2.4 Z Chain Guide with...", "creator": "jeoje", "description": "Modifies the Z chain guide to hold a chamber thermistor", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "jgehrig/v0_lcdskirt", "title": "V0 LCD Touchscreen Skirt", "creator": "jgehrig", "description": "3.2\" LCD Touch Screen Skirt", "printer_compatibility": "V0.2", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "johanncc/Raspberry_Pi_Camera_Mount", "title": "Raspberry Pi Camera Mount", "creator": "johanncc", "description": "Low profile raspberry pi camera mount", "printer_compatibility": "V0.2", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "joposter/v0_clippable_ledmounts", "title": "V0 Clippable LED Caselight", "creator": "joposter", "description": "LED Case light for the V0 that clips into the extrusions", "printer_compatibility": "V0.2", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "kageurufu/mgn12-euclid", "title": "Euclid Probe Carriage", "creator": "kageurufu", "description": "A MGN-12 carriage with an inset mount for a Euclid Probe", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "khay/V2-200_4020_Electronics_Fan", "title": "Fan for V2-200mm\u00b2", "creator": "khay", "description": "Middle Skirt for V2-200mm\u00b2 Electronics Compartment", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "khay/V2_3x_Keystone_Plugpanel", "title": "3x Keystone PlugPanel", "creator": "khay", "description": "PlugPanel with Options for 3 Keystones", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "khay/micro_backplate", "title": "V0 Micro Backplate", "creator": "khay", "description": "Minimalistic backplate for cooler motors and electronics", "printer_compatibility": "V0.2", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "kirby/v0_sherpa_mini_direct_drive", "title": "V0 Sherpa Mini Direct Drive Mod", "creator": "kirby", "description": "A direct drive mod for the V0 using the Annex Sherpa Mini extruder", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "lakai/Bruag_Skirts", "title": "Bruag Skirts", "creator": "lakai", "description": "V2 350mm skirts inspired by Bruag Facades", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "leandromarceddu/PowerSkirt", "title": "PowerSkirt", "creator": "leandromarceddu", "description": "Modified skirtpiece for a digital power monitor", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "littleferris/V0_Skirt_Inlet", "title": "V0 c14 Skirt Inlet", "creator": "littleferris", "description": "V0 C14 Skirt inlet", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "madfabrications/Vertical_PSU_Mount", "title": "Vertical PSU Mount", "creator": "madfabrications", "description": "Mounts the PSU vertically on the DIN rails", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "madros/V0_skirt_OLED", "title": "V0 OLED-skirt", "creator": "madros", "description": "V0 skirt with 0.96\" OLED", "printer_compatibility": "V0.2", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "maximilian-foerg/AB_Turbo_Mod", "title": "Afterburner Turbo Mod", "creator": "maximilian-foerg", "description": "A purely cosmetic mod for Afterburner", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "maximilian-foerg/VSW_Double_60mm_Fan_Mount", "title": "Switchwire Double 60mm Fan Mount", "creator": "maximilian-foerg", "description": "A mount for two (or four) 60mm fans in SW's electronics compartment", "printer_compatibility": "VSW", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "mikepthomas/MKS_Mosfet_Mount", "title": "MKS Mosfet Mount", "creator": "mikepthomas", "description": "MKS Mosfet Mount based of the Trident Raspberry Pi Mount.", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "mjoaris/10x11_Cable_Chain_Endcaps", "title": "10x11 Cable Chain Endcaps", "creator": "mjoaris", "description": "Printable Endcaps for 10x11 Cable Chains", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "mjoaris/Mini12864_LCD_Mount_for_V2.4", "title": "Mini12864 LCD Mount", "creator": "mjoaris", "description": "Swiveling case for the Fysetc Mini12864 LCD", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "mosher/m3_door_hinges", "title": "Door hinges with M3 screws shafts", "creator": "mosher", "description": "Simple mod of print in place door hinges, which uses m3 screws as...", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "mpfl/V0.1_skirt_OLED", "title": "V0.1 OLED-skirt", "creator": "mpfl", "description": "V0.1 skirt with 0.96\" OLED", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "muradir/Zodiac_BMO_Stealthburner_Toolhead", "title": "Zodiac BMO Stealthburner Toolhead", "creator": "muradir", "description": "A Stealthburner toolhead for the Zodiac BMO Hotend, based on the...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "natewalck/v1.8_Jigs", "title": "V1.8 Jigs", "creator": "natewalck", "description": "Jigs for assembling V1.8", "printer_compatibility": "V1.8", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "nhchiu/V0.1_Movable_Pulley_Z", "title": "V0.1 Movable Pulley Z Drive", "creator": "nhchiu", "description": "A movable pulley system on the Z axis with 1:8 total speed ratio...", "printer_compatibility": "V0.1", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "nikolasbabetas/Neopixel_Holder", "title": "Neopixel Holder", "creator": "nikolasbabetas", "description": "A holder to attach Neopixel/WS2812B Led Strips to the V0.1", "printer_compatibility": "V0.1", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "ommy/roller_brackets", "title": "roller brackets", "creator": "ommy", "description": "Brackets to help rolling V2 on its side.", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "oxno/rbp_zero_braket", "title": "RBP Zero Bracket", "creator": "oxno", "description": "Bracket for Raspberry pi zero.", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "padok/chain_anchor-ADXL345_mount", "title": "Chain Anchor - ADXL345 mount Mod", "creator": "padok", "description": "A ADXL345 mount for the Afterburner", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "piet206/V1.8._Z_Rails_Mod", "title": "V1.8 Z Rails Mod", "creator": "piet206", "description": "Add MGN12H linear rails for Z axis motion", "printer_compatibility": "V1.8", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "prasadp4009/SW_SB_CRTouch", "title": "StealthBurner CR Touch Mod", "creator": "prasadp4009", "description": "Voron SW StealthBurner CR Touch Mod", "printer_compatibility": "VSW", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "quattroerik/front_door_m3_180_deg_3mm", "title": "V2.4 Door Hinge M3 3mm 180deg", "creator": "quattroerik", "description": "Voron 2.4 door hinges for 3mm panel, 180 deg opening and m3 screw...", "printer_compatibility": "V2.4, VT", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "randell/Door_Hinges", "title": "Door Hinges", "creator": "randell", "description": "Door hinges that use an M3 bolt for a pin and bolts thru the panel", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "randell/Microswitch_Endstop", "title": "Microswitch Pod for PCB", "creator": "randell", "description": "Modified endstop pod for use of endstop switches mounted on a PCB", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "raymondh/LargeSpoolHolders", "title": "Large Spool Holders", "creator": "raymondh", "description": "Larger spool holders for KVP spools", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "reQu1em00/Kirigami_LED_Bed_Front", "title": "Kirigami LED Bed Front", "creator": "reQu1em00", "description": "Kirigami bed front with space for a single LED or Neopixel button", "printer_compatibility": "V0.2", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "reapola/MKS_CANable_Pro_mount", "title": "MKS CANable Pro DIN Mount", "creator": "reapola", "description": "MKS CANable Pro mount which mounts on a DIN rail", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "revnull/rpi_7in_display_mount", "title": "Raspberry Pi 7inch Display Mount", "creator": "revnull", "description": "An articulating mount for the offical Raspberry Pi 7inch touch screen", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "richardjm/adxl-chain", "title": "ADXL drag chain mount", "creator": "richardjm", "description": "Permanent mount for ADXL boards on the back of the motor, replacing...", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "richardjm/back-plate", "title": "Back blanking plate", "creator": "richardjm", "description": "Back blanking plate that can be used instead of the exhaust filter...", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "richardjm/led-mounts", "title": "LED 15.5mm quarter round mounts", "creator": "richardjm", "description": "Mounting corners with integrated cable runs for 15.5mm quarter...", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "richardjm/picam-corner", "title": "Picam corner mount", "creator": "richardjm", "description": "Out of the way corner mounted picam", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "richardjm/snap-latch-2020", "title": "Printable snap latches for 2020...", "creator": "richardjm", "description": "Quick release panel latch inspired by the work of others.", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "rngSplat/SW_Deck_Plate", "title": "Printable Switchwire Deck Plate", "creator": "rngSplat", "description": "Print a deck plate for Switchwire with debossed Voron logo", "printer_compatibility": "VSW", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "roboticator24/4inch_touchscreen_mount_for_v2.4", "title": "Touchscreen for OctoDash", "creator": "roboticator24", "description": "Mount a 4-inch LCD touchscreen to your V2.4 in place of the usual...", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "rsheng118/BTT_octopus_DIN_vertical_mount", "title": "BTT octopus DIN vertical mount", "creator": "rsheng118", "description": "DIN vertical mount for Big Tech Tree Octopus board", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "ryandam/Cable_management_duct", "title": "Cable Management Duct", "creator": "ryandam", "description": "Zip tie mount intergrated cable duct to hide your cable", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "sammynorway/LGX-stealthburner-connector-cover", "title": "LGX stealthburner connector cover", "creator": "sammynorway", "description": "Cable cover for LGX and stealthburner", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "samwiseg0/4channel_relay_under_deck_mount", "title": "4 Channel Relay Under Deck Mount", "creator": "samwiseg0", "description": "Mod to mount a 4 channel GPIO controlled relay", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "samwiseg0/ab_plug_microfit_1x4", "title": "AB Plug (Microfit 1x4)", "creator": "samwiseg0", "description": "Mod to mount A & B motor connectors to the gantry", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "samwiseg0/corner_cable_hide", "title": "Corner Cable Hide/Cover (LED Wires)", "creator": "samwiseg0", "description": "Mod to hide cables around z idlers", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "samwiseg0/esp8266_nodemcu_din_mount", "title": "ESP8266 NodeMCU Din Mount", "creator": "samwiseg0", "description": "Din mount for ESP8266 NodeMCU", "printer_compatibility": "V2.4, VT", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "samwiseg0/extrusion_thermistor_mount", "title": "Extrusion/Chamber Thermistor Mount", "creator": "samwiseg0", "description": "Extrusion mount for a NTC100K Thermistor extrusion", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "samwiseg0/lrs_screw_terminal_cover", "title": "LRS PSU Screw Terminal Cover", "creator": "samwiseg0", "description": "Mod to cover the screw terminals for several LRS style PSUs", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "samwiseg0/microfit_2x3_skirt_connector_adxl", "title": "Microfit 2x3 Skirt Connector (ADXL)", "creator": "samwiseg0", "description": "Mod for a Microfit 2x3 connector to be mounted in a skirt", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "samwiseg0/voyager_gtx_din_mount", "title": "Corsair Flash Voyager GTX Din Mount", "creator": "samwiseg0", "description": "Din carrier for a Corsair Flash Voyager GTX", "printer_compatibility": "V2.4, VT", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "scanlory/clip_on_door_frame", "title": "Clip-On Front Door Frame", "creator": "scanlory", "description": "Clip-on frame to stiffen and seal front door panels when using...", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "slitte/PCB_Probe", "title": "PCB_Probe", "creator": "slitte", "description": "PCB for BAT85 and pull up resistor", "printer_compatibility": "V2.4, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "slitte/ssd_bracket", "title": "ssd_bracket", "creator": "slitte", "description": "bracket for mounting a 2.5\" ssd to a din rail", "printer_compatibility": "V2.4, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "sloscotty/SW_Wall_Plate", "title": "Switchwire Wall Plate", "creator": "sloscotty", "description": "SW plate for enclosure", "printer_compatibility": "VSW", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "sloscotty/TopHat_Cam_Extension", "title": "NoNutz TopHat Cam Extension", "creator": "sloscotty", "description": "Tophat extension with integrated webcam for V0/0.1", "printer_compatibility": "V0.2", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "spacelab2021/Orbiter-Clockwork", "title": "Orbiter Clockwork Mount", "creator": "spacelab2021", "description": "A clockwork adaptor for the Orbiter v1.5 Extruder with full...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "sse018/Octopus_DIN_Rail_bracket", "title": "Octopus DIN Rail bracket", "creator": "sse018", "description": "A Din rail mount for BTT Octopus board", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "strayr/stealthburner_creality_toolhead", "title": "Creality toolhead for stealthburner", "creator": "strayr", "description": "Use a creality ender 3 style hotend with stealthburner", "printer_compatibility": "V1.8, V2.4, VSW", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "sttts/Waveshare-5.5-inch-HDMI-AMOLED", "title": "Waveshare 5.5inch HDMI AMOLED Mount", "creator": "sttts", "description": "Mod to mount a Waveshare 5.5inch full HD display on a V2", "printer_compatibility": "V2.4, VSW", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "tallman5/z-locks", "title": "Z Locks", "creator": "tallman5", "description": "Helping hands curing v2.4 build, replaces long zip ties.", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "tameike/DIN_Rail_2020_holder", "title": "Din Rail 2020 Holder", "creator": "tameike", "description": "Attaching DIN Rails to 2020", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "tameike/DIN_Rail_SKR_1.3_90deg", "title": "Din Rail SKR 90 deg", "creator": "tameike", "description": "SKR V1.3 bracket turned 90 degrees", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "tameike/Jetpack_V0", "title": "Jetpack V0 base", "creator": "tameike", "description": "Attach Jetpack to V0 frame", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "tameike/V0_TR_Mounting_Frame", "title": "TacoRaven Mounting Frame", "creator": "tameike", "description": "TR V0 mount", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "tayto-chip/skirt_switch_mod", "title": "V2.4 Skirt Switch Mod", "creator": "tayto-chip", "description": "Add a ON/OFF Switch to side or front skirts", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "teookie/AB_dial_indicator_mount", "title": "AB dial indicator mount", "creator": "teookie", "description": "Mount for attaching standard dial indicators to AB", "printer_compatibility": "V1.8, V2.4, VSW", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "teookie/skr_brace", "title": "SKR Brace", "creator": "teookie", "description": "Rigidize and stabilize SKR 1.4 mounts", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "th0mpy/beefy-din", "title": "BEEFY Din Clips", "creator": "th0mpy", "description": "Two piece BEEFY Din Clips, holds stronger", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "togi/exhaust_housing_side_fitting", "title": "Exhaust housing side fitting", "creator": "togi", "description": "Moves the exhaust housing bowden fitting 90 degrees to allow the...", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "top_gun_de/mount_for_umbilical", "title": "mount_for_umbilical", "creator": "top_gun_de", "description": "Umbilical guide that goes on the chain anchor", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "warriorofwire/slenderfan", "title": "Slenderfan for Afterburner", "creator": "warriorofwire", "description": "Lighter, quieter, smaller Afterburner", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "whoppingpochard/extrusion_backers", "title": "Extrusion Backers", "creator": "whoppingpochard", "description": "Laser-cut metal pieces to counteract bimetallic frame warping", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "wile-e1/Deck_Panel_Support_Clips", "title": "Deck Panel Support Clips", "creator": "wile-e1", "description": "Clips to help support lower deck panels to prevent (or fix) warping:", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "wile-e1/Stealthburner_CW1_PCB_Cover", "title": "Stealthburner + CW1 + PCB Cover", "creator": "wile-e1", "description": "Low-poly for Stealthburner + CW1 + PCB installations:", "printer_compatibility": "V1.8, V2.4, VSW", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "wrez/astrodyne-inlet", "title": "V0 Alternate IEC 320 C14 Power...", "creator": "wrez", "description": "Drop in replacement for alternate-source power inlet if spec inlet...", "printer_compatibility": "V0.2", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "xbst_/ADXL345_V0_Mount", "title": "ADXL345 V0 Mount", "creator": "xbst_", "description": "V0 Mount for a ADXL345 module", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "xbst_/Bed_Hinge", "title": "Car Hood Style Bed Hinge", "creator": "xbst_", "description": "A way of reaching electronics from the top by having a \"car hood\"...", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "xbst_/Duct_Mount", "title": "Duct Mount", "creator": "xbst_", "description": "100mm/4\" ducting mount for ventilation. Also supports umbilical...", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "xbst_/DuetZero", "title": "DuetZero", "creator": "xbst_", "description": "Pi Zero mount over a Duet2 for space saving", "printer_compatibility": "V0.2, V1.8, V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "xbst_/Easy_Access_Rear_Panels_v0", "title": "Easy Access Rear Panels", "creator": "xbst_", "description": "New rear panels designed to expose the extruder for easy filament...", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "xbst_/Flat_Skirts", "title": "Flat V2.4 Skirts", "creator": "xbst_", "description": "Flat V2.4 Skirts so a panel without cutouts can be used", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "xbst_/HOYMK_SSR_Mount", "title": "HOYMK SSR Mount", "creator": "xbst_", "description": "Mount for Chinese HOYMK SSR", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "xbst_/Hat_LED_Mount", "title": "Hat LED Mount", "creator": "xbst_", "description": "Top Hat LED module mount", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "xbst_/LED_Holder", "title": "PCB LED Holder", "creator": "xbst_", "description": "Very simple mount for some (?) PCB LED Bars", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "xbst_/Max31865_DIN_Mount", "title": "DIN Mount Max31865", "creator": "xbst_", "description": "A simple DIN rail mount for the Adafruit (or SAME SIZE clone)...", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "xbst_/Omron_DIN_Mount", "title": "DIN Mount Omron Relay", "creator": "xbst_", "description": "A simple DIN rail mount for the BOM Relay", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "xbst_/Relay_DIN_Mount", "title": "DIN Mount Pi 4x Relay Board", "creator": "xbst_", "description": "A simple DIN rail mount for the 4 channel relay board for Raspberry Pi", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "xbst_/V0_Electronic_Panel", "title": "V0 Electronics Cover", "creator": "xbst_", "description": "A printed cover for v0 electronics. Requires larger printer to print.", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "xbst_/V0_M4_Mod", "title": "Mobius 4 (M4) V0 Mod", "creator": "xbst_", "description": "Mod to mount a M4 extruder to a Voron 0 where pocketwatch extruder...", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "xbst_/V0_Picam", "title": "V0 PiCam Mount", "creator": "xbst_", "description": "A Raspberry Pi Camera Mount For V0", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "xbst_/V0_Screw_Front_Hinge_Mod", "title": "Screwed Front Door Hinge", "creator": "xbst_", "description": "Mod to screw the front door panel (instead of VHB)", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "xbst_/V0_Skirt_Buttons", "title": "V0 Buttons & OLED Mount", "creator": "xbst_", "description": "Mod to mount custom Gcode macro buttons & Waveshare 1.3\" OLED display", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "xbst_/V2.4_Fanless_Middle_Skirt", "title": "V2.4 Fanless Middle Skirt", "creator": "xbst_", "description": "A Fanless alternative middle side skirt", "printer_compatibility": "V2.4", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "xbst_/V2.4_Skirt_Buttons", "title": "V2.4 Skirt Buttons", "creator": "xbst_", "description": "Skirt mod for custom Gcode macro buttons", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "xbst_/ZipClip_v0", "title": "ZipClip V0", "creator": "xbst_", "description": "Very simple ziptie mount for v0 1515 extrusions", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "xceled/Single_Panel_Magnet_Mount", "title": "Single Panel Magnet Mount", "creator": "xceled", "description": "Mount your front panel using only magnets", "printer_compatibility": "V2.4", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "yenda/vsw_more_robust_belt_paths", "title": "SW More Robust XZ Belt Paths", "creator": "yenda", "description": "Small mods to belt routing components to ensure a better/more...", "printer_compatibility": "VSW", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "yeri/V0_Magnetic_Panels", "title": "V0 Magnetic Panels", "creator": "yeri", "description": "Mount V0 panels with magnets, removes need for hinges and lets you...", "printer_compatibility": "V0.2", "last_changed": "2023-07-13 14:30:27 +0000"}, {"path": "yeri/V1_3Z", "title": "V1 3Z", "creator": "yeri", "description": "3Z mod for V1", "printer_compatibility": "V1.8", "last_changed": "2023-07-15 11:51:22 +0000"}, {"path": "zruncho/V0_No_Drop_Nuts", "title": "V0 No-Drop Nuts", "creator": "zruncho", "description": "Voron0 nut inserts which auto-align (LDO frames only)", "printer_compatibility": "V0.2", "last_changed": "2023-07-15 11:51:22 +0000"}]