5815b7fa9b
* Create README.md * Added Stls and Screenshots * Updated the README * Update README.md * Typo * Updated Link to images * Typo again * Delete V0_Handles_Slim_3_Panel.stl Removed Unadjusted 3mm File * Delete V0_Handles_Slim_2.5_Panel.stl Removed Unadjusted 2.5mm file * Added Adjusted stls * Delete V0_Handles_Slim_2.5_Panel_x2.stl * Delete V0_Handles_Slim_3_Panel_x2.stl * Add files via upload Reduced the protruding piece that fits in extrusion down to 1mm. * Update README.md Added instructions to the README.md * Delete V0_Handles_Slim_2.5_Panel_x2.stl * Delete V0_Handles_Slim_3_Panel_x2.stl * V2 commit * Delete V0_Handles_Slim_2.5_Panel_x2.stl * Delete V0_Handles_Slim_3_Panel_x2.stl * Delete V0_Handles_Slim_2.5_Panel_V2_x2.stl * Delete V0_Handles_Slim_3_Panel_V2_x2.stl * Add files via upload |
||
|---|---|---|
| .. | ||
| README.md | ||
| Screenshot1.png | ||
| Screenshot2.png | ||
| Screenshot3.png | ||
| V0_Handles_Slim_2.5_Panel_x2.stl | ||
| V0_Handles_Slim_3_Panel_x2.stl | ||
README.md
V0 Handles Slim
My V0 is in my garage and my shop in the other room. Moving it back and forth for repairs was a pain as the V0.1 has no real place to grab it.
And so I made handles that don't protrude much from the sides (16mm) of the tophat keeping the footprint as close to stock as possible.
To mount:
- 4x M3x12 (8 for both sides)
- 3x M3 Nut (6 for both sides)
Print two of the file that fits your side panel thickness
- 2.5mm
- 3mm
You will have to add 3 nuts to the top extrusions as the handle replaces the top panel clip and requires 4 nuts (3 new + 1 old from panel clip)
- Remove the middle clip on the top extrusions but keep the nut in place.
- Unscrew both screws that hold the top right and left extrusions in place.
- Lift the extrusions just enough to be able to add 3 nuts in the outward channels.
- Seat the extrusions back into place and tighten the screws holding them in place.
- Reuse the existing nut (old panel clip) and the 3 new nuts to attach handle.
