# Matchstick Diffuser

A diffuser for the Daylight/Rainbow on a Matchstick LEDs

![Images/CAD1.png](Images/CAD1.png)
![Images/photo.jpg](Images/photo.jpg)

## Compatibility

These mounts are only designed to fit the [Daylight-on-a-matchstick](https://github.com/VoronDesign/Voron-Hardware/tree/master/Daylight/Daylight_on_a_matchstick) and 
[Rainbow-on-a-matchstick](https://github.com/VoronDesign/Voron-Hardware/tree/master/Daylight/Rainbow_on_a_matchstick) LEDs.  Compatibility is not guaranteed with other 
designs. 

These prints require slightly larger than a 120x120 bed, so they cannot be printed on a V0, though they are designed to be used on one.


### BOM

| Item                    | Qty |
|:------------------------|----:|
| M3 Heatset Insert       |   4 |
| M3x6 BHCS               |   4 |


### Printing

- Print one of each `main_body_daylight_A.stl` and `main_body_daylight_B.stl` if you have Daylight on a Matchstick
- Print one of each `main_body_rainbow_A.stl` and `main_body_rainbow_B.stl` if you have Rainbow on a matchstick
- Print 2 `[c]_diffuser_x2.stl` in a clear or white filament.
- Print 4 of either `top_mount_clip_x4.stl` *or* `bottom_mount_clip_x4.stl` depending on where you intend to mount the LEDs.


### Assembly

- Insert heatset inserts into the clips
- Insert matchstick led strip into main body 
- Using M3x6 BHCS, fasten the clips to the back of the leds
- Insert the diffuser into the main body