# Note this mod is only compatible with the v2.0 version of the PITFT50**

See the following two models for v2.1 compatibility
- https://www.printables.com/model/514367-tft-5-holder-for-voron-24-btt-pitft50-v21
- https://www.printables.com/model/537886-btt-pi-tft50-v21-screen-mount-for-voron-skirts_rem

Refer to [this discussion](https://github.com/VoronDesign/VoronUsers/issues/993) to determine which one suits your needs best.

# BTT PITFT50 v2 Mount

This work is based on [sttts's Waveshare 5.5inch mount](../../sttts/Waveshare-5.5-inch-HDMI-AMOLED). BTT PITFT50 v2 has a different layout than v1, featuing a brightless thumbwheel, an orientation switch and a JST XH port for unknown function. This design provide accessibility to the thumbwheel and switch.

![Test](images/IMG_6447.jpg)
![Test](images/IMG_6451.jpg)
![Test](images/f360.jpg)

## BOM

- 4x M3 Heatset Inserts
- 4x M3x6mm to attach to the mount
- 3x M3x10-12mm to attach the mount to the frame
- 4x M2.5x4mm (included in the BTT PITFT50 v2)
- 500mm ~ 600mm Ribbon Flat Cable for Raspberry Pi Camera (depends on the position of the Raspberry Pi. The included one is too short)

## Instructions

Please use the [mount in sttts's mods](../../sttts/Waveshare-5.5-inch-HDMI-AMOLED/STLs/Voron-2.4-Mount-Generisch-v6.stl) to amount this to the frame. No re-print of skirts is required!

## Print Settings

Standard Voron recommended print settings