# Voron 2.4 GE5C Z joint  


##

### BOM
Screws			
|Size|Qty|
|---|---|		
|M3x12 |4|
|M3x16 or M3x20 SHCS|16|	
|M5x20 |4|	
|Ge5C Bearing|4|
|M5x1mm spacer|4|
|If using Halleffect 6x3 magnet | 1 |


![1](Images/1.png) 

First just insert GE5C bearing , it should just pop in

![2](Images/2.png)


![1](Images/3.png) 

Now if you are using the "No Endstops" version you need 4 m3x16 screws per z joint, if you are using the endstop/halleffect version then you need 4 m3x20 per z joint.

![1](Images/4.png) 

![1](Images/5.png) 

![1](Images/7.png)

Use an M5x20 BHCS and 1 m5x1mm washer and screw it into the gantry using a roll in tnut


![1](Images/6.png) 

This is how it should be assembled when all done



### NOTE: To address the question on whether to use the offset or non-offset pieces

* if you are building a new printer using the ge5c mod, then i recommend the offset parts

* if you are just installing these in a currently built printer then the stock non-offset parts are fine