# Mods

A neatly structured list of all the content in each folder  
Remember to update this README when uploading new mods!

## List structure

The list should be structured in the following way:

## "Creator of mods"  

"Mods name"

- "Small desciption of the mod"  

"Mod 2's name"

- "Small desciption of the mod"  

---

## 3D_Black

[Fan Covers](https://github.com/VoronDesign/Voron-2/tree/master/mods/3D_Black)  

- Different fan covers for 40mm fans.  

## Andreq

[Mobius Shaft Jig](https://github.com/VoronDesign/Voron-2/tree/master/mods/andreq/voron2)

- Tool used for grinding flats on a shaft at specific places.

## Armstr0ng

[Led extrusions mount]((https://github.com/VoronDesign/Voron-2/tree/master/mods/Armstr0ng))

- A mount for aluminium LED extrusions with hidden fasteners  

## ArmyAg08

[Logitech C270 Mounts](https://github.com/VoronDesign/Voron-2/tree/master/mods/ArmyAg08/Logitech_C270_Mounts)

- Different C270 camera mounts, attached to the extrusions.

[Corner Panel Clip](https://github.com/VoronDesign/Voron-2/tree/master/mods/ArmyAg08/Panels)

- Corner panel clip that fit 3mm or 1/8" panels with foam tape.

## Chron
[SKR 1.3 TMC2208 UART Config](https://github.com/VoronDesign/Voron-2/tree/master/mods/Chron)

- Configuration for SKR 1.3 TMC2208 UART

## Danowar

[F6 Board Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Danowar/F6_Board_Mount)

- Mounts for FYSETCS F6 controller boards.

[FYSETC F6 1.3 Klipper Config](https://github.com/VoronDesign/Voron-2/tree/master/mods/Danowar/FYSETC_F6_V1.3_Klipper_Config)

- Klipper config for a FYSETC F6 350 build.

[Load Cell Spool Holder](https://github.com/VoronDesign/Voron-2/tree/master/mods/Danowar/Load_Cell_Spool_Holder)

- Spool holder with built in weight scale.

[Tablet mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Danowar/Tablet_Mount)

- Detachable mount for tablet using magnets.

## Dunar

[Panel Rest](https://github.com/VoronDesign/Voron-2/tree/master/mods/Dunar/Panel_Rest)

- External panel holder

## FHeilmann

[Voron 2.0 5mm Parts](https://github.com/VoronDesign/Voron-2/tree/master/mods/FHeilmann/VORON2_5mm_Parts)

- Parts modified for extrusions with 5mm gap.

[Voron 2.1 5mm Parts](https://github.com/VoronDesign/Voron-2/tree/master/mods/FHeilmann/VORON2.1_5mm_parts)

- Parts modified for extrusions with 5mm gap.

## Fulg

[PanelDue5 LCD Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Fulg/VORON2/PanelDue5)

- Mount for the PanelDue5 LCD display.

## GSL12

[WAGO 221 Mounts](https://github.com/VoronDesign/Voron-2/tree/master/mods/GSL12/wago_221_mount)  

## Glowtape

[MKS GenL 1.0 Mounting Bracket](https://github.com/VoronDesign/Voron-2/tree/master/mods/Glowtape)

## GustavTheMighty

[4.3 PanelDue Case](https://github.com/VoronDesign/Voron-2/tree/master/mods/GustavtheMighty/4.3-Paneldue_Case)

- Case/mount for the 4.3 PanelDue LCD Display.

## Hackdoggo

[BMGobius](https://github.com/VoronDesign/Voron-2/tree/master/mods/hackdoggo/v2/bmgobius)

- Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears.

## Jass_on

[Tempered glass clips/handle](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jass_on/Voron_2.1.1_Tempered_Glass)

- Panel clips and handles for using tempered glass side panels.

[Rear panel clips](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jass_on)

[SKR 1.3 Cooling bracket](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jass_on)

- SKR 1.3 mount with built in 40mm fan mount.

## JeJeff

[2020 Extrusion slot cover](https://github.com/VoronDesign/Voron-2/tree/master/mods/JeJeff/VORON2.1/2020_5mm_Slot_Cover)

- Slot covers for extrusions with 5mm slot width.

[Cable Tie Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/JeJeff/VORON2.1/Cable_Tie_Mount)

- Cable tie mounts for 4mm cable ties.

[Main Plug Panel](https://github.com/VoronDesign/Voron-2/tree/master/mods/JeJeff/VORON2.1/Mains_Plug_Panel_with_RJ45_Panel_Mount)

- Main Plug Panel modified to hold a RJ45 ethernet socket.

## Jink

[Coroplast mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jink/VORON_2.1/Coroplast_Mount)

- Mount / Bracket supporting the coroplast sheets.

[Filament runout sensor mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jink/VORON_2.1/Filament_Runout_Sensor_Mount)

[Left handed RAMPS mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jink/VORON_2.1/Left_Handed_Ramps_Mount)

- Mirrored RAMPS bracket.

[Spool holder with scale](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jink/VORON_2.1/Spool_Holder_With_Scale)

[WAGO Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jink/VORON_2.1/WAGO_Mount)

- Mount for 3x WAGO connectors.

## JustinVoelker

[Mains Plug Panel with RJ45](https://github.com/VoronDesign/Voron-2/tree/master/mods/JustinVoelker/VORON2)

- Mains plug panel with ethernet cutout.

## K1JWG

[PanelDue 7i Custom Logo](https://github.com/VoronDesign/Voron-2/tree/master/mods/K1JWG/PanelDue7iLogo)

- Custom Voron 2 logo for use as a PanelDue 7i startup splash screen.

## Koios

[Front Panel Locks](https://github.com/VoronDesign/Voron-2/tree/master/mods/Koios/6mm_Glass)

- Front panel locks for 6mm tempered glass panels.

[Logitech C920 Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Koios)

- Mount for C920 secured to the top front extrusion.

[LED Mounts](https://github.com/VoronDesign/Voron-2/tree/master/mods/Koios)

- Different mounts for LED light bars.

## Railgunner

[Dual Direct Drive X Carriage](https://github.com/VoronDesign/Voron-2/tree/master/mods/Railgunner/10mmBMGx2)

- Dual direct drive using 2x Bondtech BMG.

## Seamen

[RAMPS Extender Holder](https://github.com/VoronDesign/Voron-2/tree/master/mods/Railgunner/10mmBMGx2)

- Mount for RAMPS board with the stepper extender.

## Sparreau

[5V Power Supply Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau)

[FSR Circuit Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau)

- Bracket for mounting the FSR PCB.

[Z Rail Stop](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau)

[Bed Extrusion Spacer](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau)

[Dial Indicator Fan Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau)

- Mount for attaching a dial indicator to the X Carriage.

[Mains Plug Panel Parametric](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau)

- Scalable mains plug panel with small modifications.

[Z Idler Frame Extra Tab](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau)

- An extra tab added to the Z idler to prevent sagging / rotation.

## Stephan

[M12 Probeholder](https://github.com/VoronDesign/Voron-2/tree/master/mods/Stephan/M12_probeholder)

- Drop in replacement of the stock probe to a M12.

[BlTouch Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Stephan/bltouch_mount)

- Drop in replacement of the stock probe to a BLTouch.

## daveidmx

[30mm Fan Adapter](https://github.com/VoronDesign/Voron-2/tree/master/mods/daveidmx/VORON2)

- 30mm fan adapter for the X carriage.

## etherwalker

[Pi Zero Camera Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/etherwalker/Pi_Zero_Camera_Mount)

## exquyre

[Anet 12864 Display](https://github.com/VoronDesign/Voron-2/tree/master/mods/exquyre/Anet_12864_display)

- Case for Anet 12864 LCD display.

[LED Bar Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/exquyre/LED_bar_mount)

- Mount for 12V LED bars to the top extrusions.

[Cable Cover Insert](https://github.com/VoronDesign/Voron-2/tree/master/mods/exquyre/cable_cover)

- Room for 3-4 20AWG wires.

[Einsy + RAMPS Combo](https://github.com/VoronDesign/Voron-2/tree/master/mods/exquyre/einsy%2Bramps)

- Mounting bracket for 1 Einsy and 1 RAMPS.

## hiemmer

[Tool Holders](https://github.com/VoronDesign/Voron-2/tree/master/mods/hiemmer/Tool_Holders)

- Tool holder for calipers, screwdriver etc.

## nemgrea

[Magnetic Split Front Door](https://github.com/VoronDesign/Voron-2/tree/master/mods/nemgrea/magnetic_split_front_door)

- Hinges, handles and magnet mounts for creating a split front door panel.

## pnokel

[Cable Zipper](https://github.com/VoronDesign/Voron-2/tree/master/mods/pnokel)

- Small mount to secure wires with zip ties.

[Coroplast holders](https://github.com/VoronDesign/Voron-2/tree/master/mods/pnokel)

- Different coroplast holders for added support.

[Toothed Idler](https://github.com/VoronDesign/Voron-2/tree/master/mods/pnokel)

- 14.5mm toothed idler.

## steve450

[Corner Brackets](https://github.com/VoronDesign/Voron-2/tree/master/mods/steve450/Voron2.1)

- Corner brackets preventing rotation of the extrusions, and stiffening the joints.  
Also covers the Z-belt hole for improved aesthetics.

## synfinatic

[Duet Fan Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/synfinatic/Duet-Fan-Mount)

- Duet/Duex fan mount with air vents directly above the steppers to increase airflow.

[E-Stop Switch](https://github.com/VoronDesign/Voron-2/tree/master/mods/synfinatic/E-Stop-Switch)

- Mount for emergency button attached to the top of the printer.

[Filament DryBox](https://github.com/VoronDesign/Voron-2/tree/master/mods/synfinatic/Filament-DryBox)

- Mount for filament drybox attached to the side of the printer.

[LED Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/synfinatic/LED-Mount)

- Mount for LED lightbars.

[PS Extra Bracket](https://github.com/VoronDesign/Voron-2/tree/master/mods/synfinatic/PS-Extra-Bracket)

- Extra bracket to keep the power supply in place.

[RJ45 Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/synfinatic/RJ45-Mount)

- Mount for an ethernet coupler to extend / move the ethernet plug somewhere more convenient.

## warriorofwire

[Openbuilds Drag Chain](https://github.com/VoronDesign/Voron-2/tree/master/mods/warriorofwire/openbuilds_drag_chain)

- Collection of models for using an off-the-shelf, cheap, snap opening drag chain for gantry wiring and protecting wires down to the deck.

## wile.e.coyote  

[Coroplast Support](https://github.com/VoronDesign/Voron-2/tree/master/mods/wile.e.coyote)

- Support for the coroplast to prevent sagging.

[Dual Buck Bracket](https://github.com/VoronDesign/Voron-2/tree/master/mods/wile.e.coyote)  

- Mounting bracket for 2 buck converters.  

[Nozzle Scrubber Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/wile.e.coyote)  

- Mount for brass brush. Used for cleaning nozzle before printing.  

[Wago Mounts](https://github.com/VoronDesign/Voron-2/tree/master/mods/wile.e.coyote)  

- Different mounts for Wago connectors.  

---