# Snap-In Wago Mounts for 1515 extrusions

## Overview

This mod is derived from [wago_221_mount](../../../legacy_printers/printer_mods/GSL12/wago_221_mount) and brings in some
mounts for the Wago 221 terminals (2 and 3 contacts) to clip and to screw for 1515 extrusions.

## Wago-Mount for screws
I use this mount [WAGO_221-413_3x3-mount-screw.stl](./WAGO_221-413_3x3-mount-screw.stl) at the power inlet to distribute the power to pad/ssr and the PSU. There is also a [WAGO_221-412_3x2-mount_screw.stl](./WAGO_221-412_3x2-mount_screw.stl), if you plan using Wago 221-412 (2 contacts).
![Screw Mount Usage](./images/ScrewMountUsage.jpg "Screw Mount Usage")
Any m3 screw - BHCS or SHCS - should fit.

## Snap-In mounts
The snap-in mounts can be easily attached and removed from the extrusions. For using that mount print the desired stl
([WAGO_221-412_3x2-mount.stl](./WAGO_221-412_3x2-mount.stl) or [WAGO_221-412_5x2-mount.stl](./WAGO_221-412_5x2-mount.stl)
together with at least two of the mounting clips(either [LDO](./1515_SnapIn_LDO.stl) or [MakerBeam](./1515_SnapIn_Makerbeam.stl) depending on your extrusion).

Don't rotate the clips for printing. They must be printed upright, as shown in the picture. Otherwise the clips might break upon inserting into the extrusion.

![Print Orientation](./images/PrintOrientation.jpg "Print Orientation")

Use M2 self-tapping screws to attach the clips into the appropriate places of the mount. Screw heads must be flush otherwise the WAGOs won't fit.

![Assembly](./images/Mounting.jpg "Assembly")

Both mounts fit into the Z-Extrusions of the V0:

![5x Wago Mount](./images/picSnapMount5piece.jpg)

![3x Wago Mount](./images/picSnapMount3piece.jpg)