# V2.4 Handle

Carrying handle for Voron 2.4 with 6mm clearance for panel clamping. The design was heavily inspired by https://github.com/yanyixiang/Voron/tree/main/%E8%88%92%E6%9C%8D%E5%9D%9A%E5%9B%BA%E7%9A%84%E6%89%8B%E6%8A%8ABY_%E8%B7%AF%E6%98%93%E6%96%AF%E4%BA%9A%E7%BB%86%E4%BA%9A.

The handle is mounted on 2020 aluminium extrusions with 5 T-nuts. It should also fit on Trident and Voron 1.8.

![Voron 2.4 handle rendering](images/handle_rendering.jpg)
![Voron 2.4 handle](images/handle.jpg)


## Printing
  * default Voron print settings
  * no supports needed
  * use accent color for middle part

![handle inner part](images/handle_inner_part.jpg)
![handle middle part](images/handle_middle_part.jpg)
![handle outer part](images/handle_outer_part.jpg)

## BOM

Size | Qty
--- | ---
M3x12 SHCS | 3
M5x16 BHCS | 5
M5 T-Nut | 5
M3 heat set inserts | 3

![nuts and bolts](images/nuts_and_bolts.jpg)

## Assembly instructions

1. put heat set inserts in inner handle part

![insert heat set inserts](images/inner_part_with_heat_set_inserts.jpg)

2. put T-nuts in aluminium extrusion (2 T-nuts in top slot, 3 T-nuts in side slot, coarsely adjust hole distances)

![T-nuts in extrusion](images/extrusion_with_tnuts.jpg)

3. attach inner handle part to top side of the extrusion
![attach inner handle](images/extrusion_with_inner_part_mounted.jpg)

4. attach middle and outer handle part to the side of the extrusion; do not tighten M5 screws yet
![attach middle and outer handle](images/extrusion_with_all_handle_parts.jpg)

5. align parts and put in M3 screws; tighten all screws
![combine parts](images/extrusion_with_handle.jpg)