Printer mods by ArkadiuszRaj (#95)

printer_mods/README.md

@@ -29,6 +29,9 @@ like so:
 | |[Rail Alignment](./Badnoob/Rail_Alignment)|Tools and procedure to properly align the rails in 2.4 and Afterburner|:x:|:x:|:heavy_check_mark:|
 |Dan88 |[V0 one-part Skirts](./Dan88/V0skirt) |One part Skirts for the V0 |:heavy_check_mark: |:x: |:x: |
 | FreeformFez | [V1.8 Filtered Power Inlet](./FreeformFez/FilteredPower) | V1.6 Filtered Inlet and Rocker Switch for V1.8 | :x: | :heavy_check_mark: | :x: |
+|hijax_pl_ |[Corner panel clip](./hijax_pl/corner_panel_clip) |V2 panel corner frames using 3-way L brackets in the corners |:x: |:x: |:heavy_check_mark: |
+| |[Din Rail mount](./hijax_pl/din_rail_mount) |Adapter to attach DIN Rail to 2020 extrusion. |:x: |:x: |:heavy_check_mark: |
+| |[Controler Board adapters](./hijax_pl/ender_compatible_controller_mount) |DIN (rotated) and legacy adapters for boards like SKR mini E3. |:grey_question: |:x: |:heavy_check_mark: |
 |Kruppes |[V0 Printed Deck with inserts](./Kruppes/Deck_Panel_inserts_logo) |Electronics Deck Panel using brass heat inserts. Optional with accent color Voron Logo. |:heavy_check_mark: |:x: |:x: |
 |mjoaris |[10x11 Cable Chain Endcaps](./mjoaris/10x11_Cable_Chain_Endcaps) |Printable Endcaps for 10x11 Cable Chains |:x: |:heavy_check_mark: |:heavy_check_mark: |
 | |[Mini12864 LCD Mount](./mjoaris/Mini12864_LCD_Mount_for_V2.4) |Swiveling case for the Fysetc Mini12864 LCD |:x: |:grey_question: |:heavy_check_mark: |

printer_mods/hijax_pl/corner_panel_clip/README.md

@@ -0,0 +1,16 @@
+# README
+
+### Overview
+
+This is a corner modification to alllow installing panels when some thoer way of extruction connection is used.
+
+### Print parameters
+
+as per Voron specifications:
+
+- Layer height: 0.2
+- Infill: 50% or more
+- Infill type: Grid
+- Perimeters: 4 or more
+- Top/Bottom solid layers: 5 or more
+- Filament: ABS/ABS+

printer_mods/hijax_pl/din_rail_mount/README.md

@@ -0,0 +1,17 @@
+# README
+
+### Overview
+
+This is a mount for DIN RAIL in legacy v2.2 way.
+Angled version can be used to attach DIN rail to the back of Voron.
+
+### Print parameters
+
+as per Voron specifications:
+
+- Layer height: 0.2
+- Infill: 50% or more
+- Infill type: Grid
+- Perimeters: 4 or more
+- Top/Bottom solid layers: 5 or more
+- Filament: ABS/ABS+

printer_mods/hijax_pl/ender_compatible_controller_mount/README.md

@@ -0,0 +1,27 @@
+# README
+
+### Overview
+
+This is a mount for Creality Ender compatible controllers together with 40x40x10 fan to cool stepper drivers.
+Selection of compatible boards includes:
+- Creality v1.1.5 (TMC2208)
+- TH3D EZboard (TMC2208)
+- SKR mini E3 v1.2 (TMC2209)
+and similar
+
+### Print parameters
+
+as per Voron specifications:
+
+- Layer height: 0.2
+- Infill: 50% or more
+- Infill type: Grid
+- Perimeters: 4 or more
+- Top/Bottom solid layers: 5 or more
+- Filament: ABS/ABS+
+
+### BOM
+- 404010 fan 12 or 24V one (check controller board supply voltage)
+- 4x M3 thermal thread inserts
+- 4x M3 8mm screws
+- 2x M5 BHCS 8mm + T-Nuts