More mods by xbst (#145)

printer_mods/README.md

@@ -1,4 +1,4 @@
-# Mods
+# Mods
 
 Printer mods for Voron 3D printers
 Remember to update this README when uploading new mod!
@@ -82,7 +82,15 @@ like so:
 | | [DIN Mount Omron Relay](./xbst_/Omron_DIN_Mount)| A simple DIN rail mount for the BOM Relay | :x: | :heavy_check_mark: |:heavy_check_mark: |
 | | [DIN Mount Pi 4x Relay Board](./xbst_/Relay_DIN_Mount)| A simple DIN rail mount for the 4 channel relay board for Raspberry Pi | :x: | :heavy_check_mark: |:heavy_check_mark: |
 | | [DIN Mount Max31865](./xbst_/Max31865_DIN_Mount)| A simple DIN rail mount for the Adafruit (or SAME SIZE clone) MAX31865 PT100 Board. | :x: | :heavy_check_mark: |:heavy_check_mark: |
-| | [Car Hood Style  Bed Hinge](./xbst_/Bed_Hinge)| A way of reaching electronics from the top by having a "car hood" style hing for the heatbed, and rotated electronics mounts. | :x: | :x: |:heavy_check_mark: |
+| | [Car Hood Style Bed Hinge](./xbst_/Bed_Hinge)| A way of reaching electronics from the top by having a "car hood" style hinge for the heatbed, and rotated electronics mounts. | :x: | :x: |:heavy_check_mark: |
+| | [Flat V2.4 Skirts](./xbst_/Flat_Skirts) | Flat V2.4 Skirts so a panel without cutouts can be used | :x: | :x: |:heavy_check_mark: |
+| | [Duct Mount](./xbst_/Duct_Mount) | 100mm/4" ducting mount for ventilation. Also supports umbilical cord and has 3 orientations for bowden adapter. | :x: | :x: |:heavy_check_mark: |
+| | [HOYMK SSR Mount](./xbst_/HOYMK_SSR_Mount) | Mount for Chinese HOYMK SSR | :heavy_check_mark: | :x: | :x: |
+| | [ADXL345 V0 Mount](./xbst_/ADXL345_V0_Mount) | V0 Mount for a ADXL345 module | :heavy_check_mark: |:x: |:x: |
+| | [Easy Access Rear Panels](./xbst_/Easy_Access_Rear_Panels_v0) | New rear panels designed to expose the extruder for easy filament swapping | :heavy_check_mark: |:x: |:x: |
+| | [Hat LED Mount](./xbst_/Hat_LED_Mount) | Top Hat LED module mount | :heavy_check_mark: |:x: |:x: |
+| | [ZipClip V0](./xbst_/ZipClip_v0) | Very simple ziptie mount for v0 1515 extrusions | :heavy_check_mark: |:x: |:x: |
+| | [DuetZero](./xbst_/DuetZero) | Pi Zero mount over a Duet2 for space saving | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |
 
 
 ---

printer_mods/xbst_/ADXL345_V0_Mount/README.md

@@ -0,0 +1,5 @@
+![ ](./example.jpg)
+
+This works for this type of ADXL345 modules: https://s.click.aliexpress.com/e/_dUndeBj
+
+Fits snugly into the 3 M2 screw holes for the X carriage. Module just slides in from the side. Attach the 2 pieces with M2 self tappers.

printer_mods/xbst_/Bed_Hinge/README.md

@@ -21,5 +21,7 @@ Please know that most gas struts aren't rated above 50C, however I don't expect
 You will also need 2 metal corner brackets, some screws, nuts and tnuts to attach. If you don't have any buy a few different styles, they are cheap, and are useful for many applications. In the picture above you can see how I attached a corner bracket to be able to mount the gas spring.
 
 ## Instructions
-Video Instructions: [Youtube](https://youtu.be/YtxrM_qPr9c) *(live on 29 May 2020)*
+Video Instructions: [Youtube](https://youtu.be/YtxrM_qPr9c)
+
 Written version: [MANUAL.pdf](./Manual.pdf)
+

printer_mods/xbst_/Duct_Mount/README.md

@@ -0,0 +1,4 @@
+# Rear Duct Mount w/ Umbilical Support
+![](./example.jpg)
+This is to mount a 100mm/4" duct in the back for ventilation. This also supports umbilical cable, and has 3 orientations for the bowden adapter, to make the routing look cleaner. If you want to plug the other 2 holes, you can use [these](https://s.click.aliexpress.com/e/_dUdajiC).
+![](./example2.jpg)

printer_mods/xbst_/DuetZero/README.md

@@ -0,0 +1,7 @@
+# DuetZero Duet2 Pi Zero Mount
+![Usecase Example](./example.jpg)
+This is a Raspberry Pi Zero mount intended to mount OVER a Duet 2 (DuetWifi/Ethernet) to save space. You only need longer M3 screws for Duet mounting and M2 self tappers for Pi mounting.
+
+First mount the Zero on the piece, preferably inside as that is what is intended. Use 2 M2 self tappers for this. If the screws poke out on the other side cut the ends to prevent accidents. Then using M3 screws mount this to USB side of the Duet.
+
+This mount is intended for a Voron 0 but should work with any other Vorons.

printer_mods/xbst_/Easy_Access_Rear_Panels_v0/README.md

@@ -0,0 +1,6 @@
+![ ](./example.jpg)
+
+The point of these panels is to cover the mess in the rear chamber like the normal panel, but leave the extruder exposed for easy filament loading/unloading.
+The design includes cutouts for the bowden tube and an umbilical cord. 
+Bottom panel attaches with 4x M3*8 to the rear extrusions.
+Top panel attaches with 2x M3*8 to the rear extrusions & 2x M3*any to top of bed extrusions.

printer_mods/xbst_/Flat_Skirts/README.md

@@ -0,0 +1,2 @@
+# Flat V2.4 Skirts
+This is to mount a flat bottom panel without cutouts. Includes rear filtered inlet and side middle skirts. No front skirt as that is on a hinge anyway. Inlet skirt uses M3 inserts.

printer_mods/xbst_/HOYMK_SSR_Mount/README.md

@@ -0,0 +1,2 @@
+# HOYMK SSR Mount
+This is to mount a [Chinese HOYMK SSR](https://s.click.aliexpress.com/e/_dZXu2E8) to a Voron 0. Please don't use this on a larger build! This is a Chinese product, it may not handle power needs of larger builds even if they claim that it does.

printer_mods/xbst_/Hat_LED_Mount/README.md

@@ -0,0 +1,5 @@
+![ ](./example.jpg)
+
+This mounts to the top hat. You need to print 4x of them. Fits on a v0 bed with creative angles.
+
+LED Module Example (TR only, try to find similar): https://www.iled.com/urun/3000k-2835-smd-samsung-led-bar-ic-mekan-35-led-24v-50cm

printer_mods/xbst_/ZipClip_v0/README.md

@@ -0,0 +1 @@
+Very simple zip tie clip for V0's 1515 extrusions.