diff --git a/README.md b/README.md
index f7c2738e1..3721b1592 100644
--- a/README.md
+++ b/README.md
@@ -21,331 +21,331 @@ The list should be structured in the following way:
 
 ## 3D_Black
 
-[Fan Covers](https://github.com/VoronDesign/Voron-2/tree/master/Mods/3D_Black)  
+[Fan Covers](https://github.com/VoronDesign/Voron-2/tree/master/mods/3D_Black)  
 
 - Different fan covers for 40mm fans.  
 
 ## Andreq
 
-[Mobius Shaft Jig](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Andreq/VORON2)
+[Mobius Shaft Jig](https://github.com/VoronDesign/Voron-2/tree/master/mods/Andreq/VORON2)
 
 - Tool used for grinding flats on a shaft at specific places.
 
 ## Armstr0ng
 
-[Led extrusions mount]((https://github.com/VoronDesign/Voron-2/tree/master/Mods/Armstr0ng))
+[Led extrusions mount]((https://github.com/VoronDesign/Voron-2/tree/master/mods/Armstr0ng))
 
 - A mount for aluminium LED extrusions with hidden fasteners  
 
 ## ArmyAg08
 
-[Logitech C270 Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/ArmyAg08/Logitech_C270_Mounts)
+[Logitech C270 Mounts](https://github.com/VoronDesign/Voron-2/tree/master/mods/ArmyAg08/Logitech_C270_Mounts)
 
 - Different C270 camera mounts, attached to the extrusions.
 
-[Corner Panel Clip](https://github.com/VoronDesign/Voron-2/tree/master/Mods/ArmyAg08/Panels)
+[Corner Panel Clip](https://github.com/VoronDesign/Voron-2/tree/master/mods/ArmyAg08/Panels)
 
 - Corner panel clip that fit 3mm or 1/8" panels with foam tape.
 
 ## Chron
-[SKR 1.3 TMC2208 UART Config](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Chron)
+[SKR 1.3 TMC2208 UART Config](https://github.com/VoronDesign/Voron-2/tree/master/mods/Chron)
 
 - Configuration for SKR 1.3 TMC2208 UART
 
 ## Danowar
 
-[F6 Board Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/F6_Board_Mount)
+[F6 Board Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Danowar/F6_Board_Mount)
 
 - Mounts for FYSETCS F6 controller boards.
 
-[FYSETC F6 1.3 Klipper Config](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/FYSETC_F6_V1.3_Klipper_Config)
+[FYSETC F6 1.3 Klipper Config](https://github.com/VoronDesign/Voron-2/tree/master/mods/Danowar/FYSETC_F6_V1.3_Klipper_Config)
 
 - Klipper config for a FYSETC F6 350 build.
 
-[Load Cell Spool Holder](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/Load_Cell_Spool_Holder)
+[Load Cell Spool Holder](https://github.com/VoronDesign/Voron-2/tree/master/mods/Danowar/Load_Cell_Spool_Holder)
 
 - Spool holder with built in weight scale.
 
-[Tablet mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/Tablet_Mount)
+[Tablet mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Danowar/Tablet_Mount)
 
 - Detachable mount for tablet using magnets.
 
 ## Dunar
 
-[Panel Rest](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Dunar/Panel_Rest)
+[Panel Rest](https://github.com/VoronDesign/Voron-2/tree/master/mods/Dunar/Panel_Rest)
 
 - External panel holder
 
 ## FHeilmann
 
-[Voron 2.0 5mm Parts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/FHeilmann/VORON2_5mm_Parts)
+[Voron 2.0 5mm Parts](https://github.com/VoronDesign/Voron-2/tree/master/mods/FHeilmann/VORON2_5mm_Parts)
 
 - Parts modified for extrusions with 5mm gap.
 
-[Voron 2.1 5mm Parts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/FHeilmann/VORON2.1_5mm_parts)
+[Voron 2.1 5mm Parts](https://github.com/VoronDesign/Voron-2/tree/master/mods/FHeilmann/VORON2.1_5mm_parts)
 
 - Parts modified for extrusions with 5mm gap.
 
 ## Fulg
 
-[PanelDue5 LCD Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Fulg/VORON2/PanelDue5)
+[PanelDue5 LCD Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Fulg/VORON2/PanelDue5)
 
 - Mount for the PanelDue5 LCD display.
 
 ## GSL12
 
-[WAGO 221 Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/GSL12/wago_221_mount)  
+[WAGO 221 Mounts](https://github.com/VoronDesign/Voron-2/tree/master/mods/GSL12/wago_221_mount)  
 
 ## Glowtape
 
-[MKS GenL 1.0 Mounting Bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Glowtape)
+[MKS GenL 1.0 Mounting Bracket](https://github.com/VoronDesign/Voron-2/tree/master/mods/Glowtape)
 
 ## GustavTheMighty
 
-[4.3 PanelDue Case](https://github.com/VoronDesign/Voron-2/tree/master/Mods/GustavtheMighty/4.3-Paneldue_Case)
+[4.3 PanelDue Case](https://github.com/VoronDesign/Voron-2/tree/master/mods/GustavtheMighty/4.3-Paneldue_Case)
 
 - Case/mount for the 4.3 PanelDue LCD Display.
 
 ## Hackdoggo
 
-[BMGobius](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Hackdoggo/V2/BMGobius)
+[BMGobius](https://github.com/VoronDesign/Voron-2/tree/master/mods/Hackdoggo/V2/BMGobius)
 
 - Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears.
 
 ## Jass_on
 
-[Tempered glass clips/handle](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jass_on/Voron_2.1.1_Tempered_Glass)
+[Tempered glass clips/handle](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jass_on/Voron_2.1.1_Tempered_Glass)
 
 - Panel clips and handles for using tempered glass side panels.
 
-[Rear panel clips](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jass_on)
+[Rear panel clips](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jass_on)
 
-[SKR 1.3 Cooling bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jass_on)
+[SKR 1.3 Cooling bracket](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jass_on)
 
 - SKR 1.3 mount with built in 40mm fan mount.
 
 ## JeJeff
 
-[2020 Extrusion slot cover](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JeJeff/VORON2.1/2020_5mm_Slot_Cover)
+[2020 Extrusion slot cover](https://github.com/VoronDesign/Voron-2/tree/master/mods/JeJeff/VORON2.1/2020_5mm_Slot_Cover)
 
 - Slot covers for extrusions with 5mm slot width.
 
-[Cable Tie Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JeJeff/VORON2.1/Cable_Tie_Mount)
+[Cable Tie Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/JeJeff/VORON2.1/Cable_Tie_Mount)
 
 - Cable tie mounts for 4mm cable ties.
 
-[Main Plug Panel](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JeJeff/VORON2.1/Mains_Plug_Panel_with_RJ45_Panel_Mount)
+[Main Plug Panel](https://github.com/VoronDesign/Voron-2/tree/master/mods/JeJeff/VORON2.1/Mains_Plug_Panel_with_RJ45_Panel_Mount)
 
 - Main Plug Panel modified to hold a RJ45 ethernet socket.
 
 ## Jink
 
-[Coroplast mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jink/VORON_2.1/Coroplast_Mount)
+[Coroplast mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jink/VORON_2.1/Coroplast_Mount)
 
 - Mount / Bracket supporting the coroplast sheets.
 
-[Filament runout sensor mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jink/VORON_2.1/Filament_Runout_Sensor_Mount)
+[Filament runout sensor mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jink/VORON_2.1/Filament_Runout_Sensor_Mount)
 
-[Left handed RAMPS mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jink/VORON_2.1/Left_Handed_Ramps_Mount)
+[Left handed RAMPS mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jink/VORON_2.1/Left_Handed_Ramps_Mount)
 
 - Mirrored RAMPS bracket.
 
-[Spool holder with scale](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jink/VORON_2.1/Spool_Holder_With_Scale)
+[Spool holder with scale](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jink/VORON_2.1/Spool_Holder_With_Scale)
 
-[WAGO Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jink/VORON_2.1/WAGO_Mount)
+[WAGO Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jink/VORON_2.1/WAGO_Mount)
 
 - Mount for 3x WAGO connectors.
 
 ## JustinVoelker
 
-[Mains Plug Panel with RJ45](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JustinVoelker/VORON2)
+[Mains Plug Panel with RJ45](https://github.com/VoronDesign/Voron-2/tree/master/mods/JustinVoelker/VORON2)
 
 - Mains plug panel with ethernet cutout.
 
 ## K1JWG
 
-[PanelDue 7i Custom Logo](https://github.com/jwg3/Voron-2/tree/master/Mods/K1JWG/PanelDue7iLogo)
+[PanelDue 7i Custom Logo](https://github.com/jwg3/Voron-2/tree/master/mods/K1JWG/PanelDue7iLogo)
 
 - Custom Voron 2 logo for use as a PanelDue 7i startup splash screen.
 
 ## Koios
 
-[Front Panel Locks](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Koios/6mm_Glass)
+[Front Panel Locks](https://github.com/VoronDesign/Voron-2/tree/master/mods/Koios/6mm_Glass)
 
 - Front panel locks for 6mm tempered glass panels.
 
-[Logitech C920 Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Koios)
+[Logitech C920 Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Koios)
 
 - Mount for C920 secured to the top front extrusion.
 
-[LED Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Koios)
+[LED Mounts](https://github.com/VoronDesign/Voron-2/tree/master/mods/Koios)
 
 - Different mounts for LED light bars.
 
 ## Railgunner
 
-[Dual Direct Drive X Carriage](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Railgunner/10mmBMGx2)
+[Dual Direct Drive X Carriage](https://github.com/VoronDesign/Voron-2/tree/master/mods/Railgunner/10mmBMGx2)
 
 - Dual direct drive using 2x Bondtech BMG.
 
 ## Seamen
 
-[RAMPS Extender Holder](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Railgunner/10mmBMGx2)
+[RAMPS Extender Holder](https://github.com/VoronDesign/Voron-2/tree/master/mods/Railgunner/10mmBMGx2)
 
 - Mount for RAMPS board with the stepper extender.
 
 ## Sparreau
 
-[5V Power Supply Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
+[5V Power Supply Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau)
 
-[FSR Circuit Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
+[FSR Circuit Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau)
 
 - Bracket for mounting the FSR PCB.
 
-[Z Rail Stop](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
+[Z Rail Stop](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau)
 
-[Bed Extrusion Spacer](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
+[Bed Extrusion Spacer](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau)
 
-[Dial Indicator Fan Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
+[Dial Indicator Fan Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau)
 
 - Mount for attaching a dial indicator to the X Carriage.
 
-[Mains Plug Panel Parametric](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
+[Mains Plug Panel Parametric](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau)
 
 - Scalable mains plug panel with small modifications.
 
-[Z Idler Frame Extra Tab](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
+[Z Idler Frame Extra Tab](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau)
 
 - An extra tab added to the Z idler to prevent sagging / rotation.
 
 ## Stephan
 
-[M12 Probeholder](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Stephan/M12_probeholder)
+[M12 Probeholder](https://github.com/VoronDesign/Voron-2/tree/master/mods/Stephan/M12_probeholder)
 
 - Drop in replacement of the stock probe to a M12.
 
-[BlTouch Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Stephan/bltouch_mount)
+[BlTouch Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Stephan/bltouch_mount)
 
 - Drop in replacement of the stock probe to a BLTouch.
 
 ## Volcom8190
 
-[Nozzle Scrubber](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Volcom8190/V2_and_V2.1/Nozzle_Scrubber)
+[Nozzle Scrubber](https://github.com/VoronDesign/Voron-2/tree/master/mods/Volcom8190/V2_and_V2.1/Nozzle_Scrubber)
 
 - Mount for brass brush with added waste bucket.
 
-[Panels - Handles - Skirts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Volcom8190/V2_and_V2.1/Panels)
+[Panels - Handles - Skirts](https://github.com/VoronDesign/Voron-2/tree/master/mods/Volcom8190/V2_and_V2.1/Panels)
 
 - Different panels, skirts, handles and some mods for the filtered mains.
 
 ## daveidmx
 
-[30mm Fan Adapter](https://github.com/VoronDesign/Voron-2/tree/master/Mods/daveidmx/VORON2)
+[30mm Fan Adapter](https://github.com/VoronDesign/Voron-2/tree/master/mods/daveidmx/VORON2)
 
 - 30mm fan adapter for the X carriage.
 
 ## etherwalker
 
-[Pi Zero Camera Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/etherwalker/Pi_Zero_Camera_Mount)
+[Pi Zero Camera Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/etherwalker/Pi_Zero_Camera_Mount)
 
 ## exquyre
 
-[Anet 12864 Display](https://github.com/VoronDesign/Voron-2/tree/master/Mods/exquyre/Anet_12864_display)
+[Anet 12864 Display](https://github.com/VoronDesign/Voron-2/tree/master/mods/exquyre/Anet_12864_display)
 
 - Case for Anet 12864 LCD display.
 
-[LED Bar Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/exquyre/LED_bar_mount)
+[LED Bar Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/exquyre/LED_bar_mount)
 
 - Mount for 12V LED bars to the top extrusions.
 
-[Cable Cover Insert](https://github.com/VoronDesign/Voron-2/tree/master/Mods/exquyre/cable_cover)
+[Cable Cover Insert](https://github.com/VoronDesign/Voron-2/tree/master/mods/exquyre/cable_cover)
 
 - Room for 3-4 20AWG wires.
 
-[Einsy + RAMPS Combo](https://github.com/VoronDesign/Voron-2/tree/master/Mods/exquyre/einsy%2Bramps)
+[Einsy + RAMPS Combo](https://github.com/VoronDesign/Voron-2/tree/master/mods/exquyre/einsy%2Bramps)
 
 - Mounting bracket for 1 Einsy and 1 RAMPS.
 
 ## hiemmer
 
-[Tool Holders](https://github.com/VoronDesign/Voron-2/tree/master/Mods/hiemmer/Tool_Holders)
+[Tool Holders](https://github.com/VoronDesign/Voron-2/tree/master/mods/hiemmer/Tool_Holders)
 
 - Tool holder for calipers, screwdriver etc.
 
 ## nemgrea
 
-[Magnetic Split Front Door](https://github.com/VoronDesign/Voron-2/tree/master/Mods/nemgrea/magnetic_split_front_door)
+[Magnetic Split Front Door](https://github.com/VoronDesign/Voron-2/tree/master/mods/nemgrea/magnetic_split_front_door)
 
 - Hinges, handles and magnet mounts for creating a split front door panel.
 
 ## pnokel
 
-[Cable Zipper](https://github.com/VoronDesign/Voron-2/tree/master/Mods/pnokel)
+[Cable Zipper](https://github.com/VoronDesign/Voron-2/tree/master/mods/pnokel)
 
 - Small mount to secure wires with zip ties.
 
-[Coroplast holders](https://github.com/VoronDesign/Voron-2/tree/master/Mods/pnokel)
+[Coroplast holders](https://github.com/VoronDesign/Voron-2/tree/master/mods/pnokel)
 
 - Different coroplast holders for added support.
 
-[Toothed Idler](https://github.com/VoronDesign/Voron-2/tree/master/Mods/pnokel)
+[Toothed Idler](https://github.com/VoronDesign/Voron-2/tree/master/mods/pnokel)
 
 - 14.5mm toothed idler.
 
 ## steve450
 
-[Corner Brackets](https://github.com/VoronDesign/Voron-2/tree/master/Mods/steve450/Voron2.1)
+[Corner Brackets](https://github.com/VoronDesign/Voron-2/tree/master/mods/steve450/Voron2.1)
 
 - Corner brackets preventing rotation of the extrusions, and stiffening the joints.  
 Also covers the Z-belt hole for improved aesthetics.
 
 ## synfinatic
 
-[Duet Fan Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/Duet-Fan-Mount)
+[Duet Fan Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/synfinatic/Duet-Fan-Mount)
 
 - Duet/Duex fan mount with air vents directly above the steppers to increase airflow.
 
-[E-Stop Switch](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/E-Stop-Switch)
+[E-Stop Switch](https://github.com/VoronDesign/Voron-2/tree/master/mods/synfinatic/E-Stop-Switch)
 
 - Mount for emergency button attached to the top of the printer.
 
-[Filament DryBox](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/Filament-DryBox)
+[Filament DryBox](https://github.com/VoronDesign/Voron-2/tree/master/mods/synfinatic/Filament-DryBox)
 
 - Mount for filament drybox attached to the side of the printer.
 
-[LED Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/LED-Mount)
+[LED Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/synfinatic/LED-Mount)
 
 - Mount for LED lightbars.
 
-[PS Extra Bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/PS-Extra-Bracket)
+[PS Extra Bracket](https://github.com/VoronDesign/Voron-2/tree/master/mods/synfinatic/PS-Extra-Bracket)
 
 - Extra bracket to keep the power supply in place.
 
-[RJ45 Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/RJ45-Mount)
+[RJ45 Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/synfinatic/RJ45-Mount)
 
 - Mount for an ethernet coupler to extend / move the ethernet plug somewhere more convenient.
 
 ## warriorofwire
 
-[Openbuilds Drag Chain](https://github.com/VoronDesign/Voron-2/tree/master/Mods/warriorofwire/openbuilds_drag_chain)
+[Openbuilds Drag Chain](https://github.com/VoronDesign/Voron-2/tree/master/mods/warriorofwire/openbuilds_drag_chain)
 
 - Collection of models for using an off-the-shelf, cheap, snap opening drag chain for gantry wiring and protecting wires down to the deck.
 
 ## wile.e.coyote  
 
-[Coroplast Support](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote)
+[Coroplast Support](https://github.com/VoronDesign/Voron-2/tree/master/mods/wile.e.coyote)
 
 - Support for the coroplast to prevent sagging.
 
-[Dual Buck Bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote)  
+[Dual Buck Bracket](https://github.com/VoronDesign/Voron-2/tree/master/mods/wile.e.coyote)  
 
 - Mounting bracket for 2 buck converters.  
 
-[Nozzle Scrubber Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote)  
+[Nozzle Scrubber Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/wile.e.coyote)  
 
 - Mount for brass brush. Used for cleaning nozzle before printing.  
 
-[Wago Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote)  
+[Wago Mounts](https://github.com/VoronDesign/Voron-2/tree/master/mods/wile.e.coyote)  
 
 - Different mounts for Wago connectors.