diff --git a/firmware_configurations/klipper/bryansj/Readme.md b/firmware_configurations/klipper/bryansj/Readme.md
index c9c0b370a..19a6437c2 100644
--- a/firmware_configurations/klipper/bryansj/Readme.md
+++ b/firmware_configurations/klipper/bryansj/Readme.md
@@ -1,21 +1,21 @@
 This is my modded version of Eddie's SKR Klipper config file.
 
-# Voron Design VORON2.2 V2.291 300mm SKR 1.3 TMC2209 UART config
-# Based on Eddie's template and guide from:
-# github.com/VoronDesign/VoronUsers/tree/master/firmware_configurations/klipper/eddie
-# with the following adjustments and additions from bryansj:
-#   RepRapDiscount 128x64 Full Graphic Smart Controller
-#   Nozzle Wipe
-#       added to G32
-#   Prime Line
-#   Extended QGL corner points
-#   Bed Meshing (Commented Out)
-#   TL Filament Run-out Sensor
-#   Chamber Temperature Thermistor (in Z vertical Chain)
-#       linked to Back Panel Exhaust fan 
-#   Force Move Enabled
-#   Pause/Resume Enabled
-#   Homing IF/THEN to omit unneeded homing operations
-#   M117 LCD Text Added *16 Characters Max
-#   Expanded LCD Menu Options for Voron/Klipper Commands
-#       Quad Gantry Level, Firmware_Restart, TESTZ Offsetting
\ No newline at end of file
+Voron Design VORON2.2 V2.291 300mm SKR 1.3 TMC2209 UART config
+Based on Eddie's template and guide from:
+github.com/VoronDesign/VoronUsers/tree/master/firmware_configurations/klipper/eddie
+with the following adjustments and additions from bryansj:
+  RepRapDiscount 128x64 Full Graphic Smart Controller
+  Nozzle Wipe
+      added to G32
+  Prime Line
+  Extended QGL corner points
+  Bed Meshing (Commented Out)
+  TL Filament Run-out Sensor
+  Chamber Temperature Thermistor (in Z vertical Chain)
+      linked to Back Panel Exhaust fan 
+  Force Move Enabled
+  Pause/Resume Enabled
+  Homing IF/THEN to omit unneeded homing operations
+  M117 LCD Text Added *16 Characters Max
+  Expanded LCD Menu Options for Voron/Klipper Commands
+      Quad Gantry Level, Firmware_Restart, TESTZ Offsetting
\ No newline at end of file