Printable SW deck plate by rngSplat (#209)

printer_mods/README.md

@@ -97,6 +97,7 @@ like so:
 |Rhastlyn |[Wansview 1080p Camera Mount](./Rhastlyn/WansviewCameraMount) |A camera mount that replaces the OEM part to allow the camera to be mounted to a 2020 extrusion | :x: |:grey_question: |:heavy_check_mark: |:x:|
 | |[60mm Fan Cover](./Rhastlyn/60mmFanCover)|A easy to install cover for spec 60mm fans originally designed for a 2.4 build| :x: |:grey_question: |:heavy_check_mark: |:x:|
 | roboticator24 | [Touchscreen for OctoDash](./roboticator24/4inch_touchscreen_mount_for_v2.4) | Mount a 4-inch LCD touchscreen to your V2.4 in place of the usual 12864 panel to allow you to run the amazing OctoDash touch UI | :x: | :x: | :heavy_check_mark: |:x:|
+| rngSplat | [Printable Switchwire Deck Plate](./rngSplat/SW_Deck_Plate) | Print a deck plate for Switchwire with debossed Voron logo | :x: | :x: | :x: | :heavy_check_mark: |
 | Slidr | [PanzerChain 2.4](./Slidr/PanzerChain2.4) | Energychain for V2.4 | :x: | :x: | :heavy_check_mark: |:x:|
 | Spaghetti-Bolognese |[Simplified Z Drive Motor Mount](Spaghetti-Bolognese/Z_drive_motor_mount) | Z drive motor mount bracket mod to improve pulley to belt alignment | :x: | :x: | :heavy_check_mark: |:x:|
 | |[LCD Case Mod](Spaghetti-Bolognese/LCD_case_mod) | Improvements to the V2.4 mini12864 LCD case inc E-stop button cover | :x: | :x: | :heavy_check_mark: |:x:|

printer_mods/rngSplat/SW_Deck_Plate/README.md

@@ -0,0 +1,8 @@
+# Printable deck plate for Switchwire
+I don't have easy access to the tools for precisely cutting ABS sheets, but I figured I could print them pretty well if I split and dovetailed them. I added a debossed voron logo, for style.
+
+All STLs are oriented face down. I printed in ABS with a brim. Trim the brim and join the halves together. Depending on your material choice, use the adhesive of your choice. You can also just secure them to the rails and have the dovetail hold them together, since they aren't moving parts.
+
+Print settings aren't crucial, but the deboss is 0.6mm, so 0.2 or 0.3 should work just fine if you plan to do the logo in a different color. 
+
+![](./Printable_Deckplate.jpg?raw=true)