diff --git a/printer_mods/README.md b/printer_mods/README.md
index b4ba743ce..330985730 100644
--- a/printer_mods/README.md
+++ b/printer_mods/README.md
@@ -13,412 +13,412 @@ contact the admins on Discord to have your mod moved to this folder.
 
 | Creator | Mod title | Description | Printer compatibility | Last Changed |
 | --- | --- | ----- | --- | --- |
-| 1-0-R | [V2.4 handle](1-0-R/handle) | Handle for Voron 2.4 | V2.4 | 2023-08-23 23:08:13 +0000 |
-| 120decibell | [Side entry exhaust housing](120decibell/exhaust_housing_side_entry) | Exhaust housing with dual cover screws and single or dual side... | V1.8, V2.4, VT | 2023-08-23 23:08:13 +0000 |
-|  | [Huvud Chain Mount](120decibell/huvud_chain_mount) | Huvud rear mount for Clockwork or LGX that supports a cable chain. | V1.8, VT | 2023-08-23 23:08:13 +0000 |
-| 3dpandme | [FANnypack zero](3dpandme/Fannypack_zero) | Electronics cooling solution for Voron Zero | V0.2, VSW, VT | 2023-08-23 23:08:13 +0000 |
-|  | [Thermistor holder zero](3dpandme/Thermistor_holder_zero) | Extended thermistor holder for Voron Zero | V0.2, VSW, VT | 2023-08-23 23:08:13 +0000 |
-| 3vilson | [V0.1_Skirt_Holes](3vilson/V0.1_Skirt_Holes) | Skirt with Access Holes from the bottom | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [V0.1_Skirt_Inlet](3vilson/V0.1_Skirt_Inlet) | Skirt with C14 inlet + New feet to screw into | V0.2 | 2023-08-23 23:08:13 +0000 |
-| 42bios | [LED mount](42bios/LED_mount) | AngryLED - LED-mount for Lumentech LT3 profiles. | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Corner panel clip w. cable](42bios/corner_panel_clip_cable) | Corner panel clip with an internal cable path. | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Exhaust filter housing - side...](42bios/exhaust_filter_housing_side) | Exhaust filter housing with the G1-8 "thread on the side. | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [relay mount](42bios/relay_mount) | relay-mount for 2x 2 channel relay modules. | V2.4 | 2023-08-23 23:08:13 +0000 |
-| Akio | [Hidden cable routing z belt cover](Akio/cable_routing_z_belt_cover) | Z belt covers that allow hidden cable routing. | V2.4 | 2023-08-23 23:08:13 +0000 |
-| AlexanderT-Moss | [270 Clamping Hinges](AlexanderT-Moss/270-Clamping-Hinges) | Simple 270 degree hinges that clamp to the front panels instead of... | V2.4 | 2023-08-23 23:08:13 +0000 |
-| Andre | [Mini Afterburner ADXL345 Mount](Andre/Mini_Afterburner_ADXL345_Mount) | Mount for an AXDL345 on the Mini Afterburner | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Mini Afterburner Strain Relief](Andre/Mini_Afterburner_Strain_Relief) | A replacement strain relief for the Mini Afterburner toolhead | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Revo Nozzle Skirt](Andre/Revo_Nozzle_Skirt_Trident) | A Revo nozzle box hidden in a Trident skirt. | VT | 2023-08-23 23:08:13 +0000 |
-|  | [V0 Neopixel Front Bed Mount](Andre/V0_Neopixel_Front_Bed_Mount) | A replacement Front Bed Mount with room for a neopixel or dotstar... | V0.2 | 2023-08-23 23:08:13 +0000 |
-| Backenfutter | [Mount for Electreeks Camera](Backenfutter/Mount_for_Electreeks_Camera) | This Mod is a simple "One Piece" mount for the popular Electreeks... | V2.4 | 2023-08-23 23:08:13 +0000 |
-| Badnoob | [AB-BN Afterburner mod (5015)](Badnoob/AB-BN) | Improved Afterburner with 5015 fan | V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-|  | [AB-BN for Stock Afterburner (4020)](Badnoob/ABBN_for_Stock) | Improved Dragon and Rapido toolhead for stock Afterburner with 4020... | V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-|  | [Precision AB Drive](Badnoob/Precision_AB_Drive) | Changes the gearing for the AB drives to improve both resolution... | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Rail Alignment](Badnoob/Rail_Alignment) | Tools and procedure to properly align the rails in 2.4 and Afterburner | V2.4 | 2023-08-23 23:08:13 +0000 |
-| Baltojikale | [LoudOwl aka Stabby](Baltojikale/LoudOwl_aka_Stabby) | Alternative dual 5015 part cooling fan toolhead for Afterburner | V1.8, V2.4, VSW | 2023-08-23 23:08:13 +0000 |
-| BladeScraper-Designs | [CornerPanel_SpoolHolder](BladeScraper-Designs/CornerPanel_SpoolHolder) | A better supported Spool Holder that mounts to a modified corner... | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Horizontal Spool Holder](BladeScraper-Designs/Horizontal-Spool-Holder) | Based on the stock holder but mounts to the horizontal extrusions. | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Microswitch Pod With Connector](BladeScraper-Designs/Microswitch_Pod_With_Conector) | Microswitch pod with JST-XH 4-pin connector | V2.4 | 2023-08-23 23:08:13 +0000 |
-| Blamm | [LRS-100 DIN mount](Blamm/lrs-100) | DIN rail mount for an extra LRS-100 Power Supply | V1.8, V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| BlueBear | [Bowden Fence](BlueBear/Bowden_Fence) | A little "fence" to hold the tubes away from the belts. | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Deck Panel Backpack](BlueBear/Deck_Panel_Backpack) | A mounting alternative if you don't want to drill your deck panel | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Clippable Wago 221 Mounts](BlueBear/Wago_221_mount) | Mounts for Wago 221 to screw or clip-in on 1515 extrusions | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Ziptie Mount](BlueBear/Ziptie_Mount) | Clippable Ziptie hooks for 1515 extrusions | V0.2 | 2023-08-23 23:08:13 +0000 |
-| Boingomw | [Wago mount](Boingomw/Wago_mount) | Smaller 5 port Wago mount that fits parallel to the support rails | V2.4 | 2023-08-23 23:08:13 +0000 |
-| Bondtech | [Mini-After-LGX-Lite](Bondtech/Mini-After-LGX-Lite) | LGX Lite Toolhead Setup For Voron V0.1. | V0.2 | 2023-08-23 23:08:13 +0000 |
-| ByteChild | [2-Channel Relay DIN Rail Bracket](ByteChild/2_Channel_Relay_DIN_Rail_Bracket) | DIN Rail mounting bracket for an 2-Channel-Relay | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [ESP32 DIN Rail Bracket](ByteChild/ESP32_DIN_Rail_Bracket) | DIN rail mounting bracket for an ESP32 | V2.4 | 2023-08-23 23:08:13 +0000 |
-| CannedBass | [PITFT50 45-degree mount](CannedBass/PITFT50_45_degree_mount) | Mount that puts the screen at a 45-degree angle for more vertical... | V2.4, VT | 2023-08-23 23:08:13 +0000 |
-|  | [Trident Bed Fans](CannedBass/Trident_Bed_Fans) | Bed fans for Trident | VT | 2023-08-23 23:08:13 +0000 |
-| Ch4rlesB | [V0 Handles Slim](Ch4rlesB/V0_Handles_Slim) | Simple and slim handles for the V0 | V0.2 | 2023-08-23 23:08:13 +0000 |
-| Chaoticlab | [Tool_free_tensioner](Chaoticlab/Tool_free_tensioner) | Tool-free tensioner for Z-Axis | V2.4 | 2023-08-23 23:08:13 +0000 |
-| ChenTheDesignMaker | [Z Belt Clip](ChenTheDesignMaker/Z_Belt_Clip) | Simple clip to keep extra Z belts clean and away from panels | V2.4 | 2023-08-23 23:08:13 +0000 |
-| D4rkCelerity | [Raspberry Pi Zero Bracket](D4rkCelerity/Raspberry_Pi_Zero_Bracket) | Modified version of Trident RPi bracket to fit the smaller RPi Zero | V0.2, V1.8, V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| DC67 | [Plug Panel Mod for Schaffner...](DC67/plug_panel_schaffner) | A modified plug panel for the Power Entry Connector Schaffner... | V2.4 | 2023-08-23 23:08:13 +0000 |
-| DaGlo | [V0.1 Duet 2 Wifi mounting brackets](DaGlo/Voron_V0_Duet_2_WiFi_Mounting_Brackets) | Voron 0.1 Mounting brackets with/without RPi 4 | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Voron V0 Mean Well power supply...](DaGlo/Voron_V0_MW_PS_Bracket) | Voron V0 Mean Well power supply bracket (Funssor Kit) | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Voron V0 SSR Mount](DaGlo/Voron_V0_SSR_Mount) | Voron V0 SSR Mount for the bottom | V0.2 | 2023-08-23 23:08:13 +0000 |
-| DaGrooch13 | [Tophat Exhaust Filter V0](DaGrooch13/Tophat_Exhaust_Filter) | Activated charcoal exhaust filter with HEPA that replaces the rear... | V0.2 | 2023-08-23 23:08:13 +0000 |
-| DaStivi | [The Cephalopod limb (BTT Octopus...](DaStivi/the_Cephalopods_limb) | An alternative Din rail mount for BTT Octopus (PRO) boards | V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-| Dan88 | [V0 one-part Skirts](Dan88/V0skirt) | One part Skirts for the V0 | V0.2 | 2023-08-23 23:08:13 +0000 |
-| Daten | [Revo hotend skirt case](Daten/Voron_2.4_Revo_Nozzle_Holder) | A skirt case for the Revo hotends to reside R1 and R2 | V2.4 | 2023-08-23 23:08:13 +0000 |
-| DerekBackus | [LED Strip Holder](DerekBackus/LED_Holder) | Simple bracket to mount an LED strip |  | 2023-08-23 23:08:13 +0000 |
-|  | [Trident Right Skirt Switch](DerekBackus/Right_Skirt_Switch) | Moves power switch to right front skirt on the Trident |  | 2023-08-23 23:08:13 +0000 |
-| Derpimus | [V0.1 Block Handle](Derpimus/Block_handle_v0.1) | V0.1 Block Style Handle | V0.2 | 2023-08-23 23:08:13 +0000 |
-| DorjeDorf | [Duet 3 3HC Din Bracket](DorjeDorf/Duet_3_3HC_Din_Bracket) | V2.4 Duet 3 3HC Din Bracket | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Duet 3 6HC Din Bracket](DorjeDorf/Duet_3_6HC_Din_Bracket) | V2.4 Duet 3 6HC Din Bracket | V2.4 | 2023-08-23 23:08:13 +0000 |
-| Dr-Info | [V2.4 Rear Skirt Mod for Z-Drive...](Dr-Info/V2.4r2_Z-Drive_Motor_Tensioner_Mod_Rear_Skirts) | This mod enables the you to utilize the rear skirts, power and... | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Corner Cable Cover with Drop Holes](Dr-Info/corner_cable_cover_with_drop_down_holes) | Corner cable cover around Z-idler with drop holes near z frame and... | V2.4 | 2023-08-23 23:08:13 +0000 |
-| DrGhetto | [Ghetto Panels](DrGhetto/GhettoPanels) | Printed panels for the Voron Zero | V0.2 | 2023-08-23 23:08:13 +0000 |
-| ElPoPo | [Removable Doors](ElPoPo/RemovableDoors) | New hinge to easily remove the door and have a wide opening V2.x | V2.4 | 2023-08-23 23:08:13 +0000 |
-| Electroleon | [U2C Mounting](Electroleon/U2C_Mounting) | Bigtreetech U2C CAN Interface mounting bracket | V0.2, V1.8, V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| Ellis | [15x15 Drag Chain End](Ellis/15x15_Drag_Chain_End) | 15x15 drag chain end piece | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Badge Retractor Mount](Ellis/Badge_Retractor_Mount) | Extrusion mount for badge retractor to keep bowden tube out of the... | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Bed Fans](Ellis/Bed_Fans) | Bed fan control macros and 5015 bed fan mounts | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Short Z Joints](Ellis/Short_Z_Joints) | Shorter Z joints for the v2.4 | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Single MGN9H Carriage](Ellis/Single_MGN9H_Carriage) | Single MGN9H toolhead carriage with toolhead x endstop support (for... | V1.8, V2.4 | 2023-08-23 23:08:13 +0000 |
-| Empusas | [Mounts for BTT Filament Motion...](Empusas/BTT_Filament_Motion_Sensor_Mount) | Mounts for Big Tree Tech Smart Filament Motion Sensor | V0.2, V1.8, V2.4, VSW | 2023-08-23 23:08:13 +0000 |
-|  | [Power Skirt 2.x FN284-10-06](Empusas/PowerSkirt_FN284-10-06) | Power Skirt for Schaffner FN284-10-06 V2.x | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Mounts for Terminal Blocks NC933...](Empusas/Terminal_Blocks_NC933_SPL-62) | Mounts for Terminal Blocks NC933 and SPL-62 from AliExpress | V2.4 | 2023-08-23 23:08:13 +0000 |
-| Fiction | [C270 mount](Fiction/C270_mount) | Logitech C270 webcam front-centre mount | V2.4, VT | 2023-08-23 23:08:13 +0000 |
-|  | [Crossrail](Fiction/Crossrail) | Across-the-rails LRS-200-24 or RSP-200-24 mount using DRP-03 brackets | V2.4, VT | 2023-08-23 23:08:13 +0000 |
-|  | [Exhaust_cover](Fiction/Exhaust_cover) | Cover for exhaust cutout in back panel | V2.4, VT | 2023-08-23 23:08:13 +0000 |
-|  | [Exhaust_cover_SFS](Fiction/Exhaust_cover_SFS) | Exhaust cover and BTT Smart Filament Sensor mount | V2.4, VT | 2023-08-23 23:08:13 +0000 |
-|  | [LGX Lite toolhead PCB mount](Fiction/LGX_Lite_toolhead_PCB_mount) | Mount for Hartk's toolhead PCB(s) for LGX Lite | V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-| FreeformFez | [V1.8 Filtered Power Inlet](FreeformFez/FilteredPower) | V1.6 Filtered Inlet and Rocker Switch for V1.8 | V1.8 | 2023-08-23 23:08:13 +0000 |
-| GSL12 | [Pocketwatch Nema 17](GSL12/pocketwatch_nema17) | Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe... |  | 2023-08-23 23:08:13 +0000 |
-| GadgetAngel | [Bed Support Extrusions Alignment...](GadgetAngel/Bed_Support_Alignment_Tools) | The bed support alignment tools will assist in helping align the... | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Cricut Voron Logos](GadgetAngel/Cricut_Voron_Logos) | For any cutting machines or machines that rely on vector graphics... | V0.2, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-| Galvanic | [Bowden Tube Guide](Galvanic/Bowden_Tube_Guide) | Bowden tube guide and CANBUS wire support | V1.8, V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| GiulianoM | [Fly F407ZG Mount](GiulianoM/FlyF407ZG) | Mount for the Fly F407ZG: https://github.com/FLYmaker/FLYF407ZG | V2.4 | 2023-08-23 23:08:13 +0000 |
-| Gizzle | [Ender 3 and Ender 3 Pro...](Gizzle/ender-3_pro_switchwire) | Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics... | VSW | 2023-08-23 23:08:13 +0000 |
-| Hobson318 | [Belt Tension Wrench](Hobson318/Belt_Tension_Wrench) | Wrench for easier turning of the belt tension knobs on V0.1 | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Klipper Expander Mount](Hobson318/Klipper_Expander_Mount) | Mounting brackets for the klipper expander using vhb tape or... | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-| Iakabos | [c920 Mount](Iakabos/C920_mount) | Slim mount for logitech c920 webcam | V1.8, V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [V0 beltchains](Iakabos/V0_beltchain) | Modified beltchain parts for V0 Z cables | V0.2 | 2023-08-23 23:08:13 +0000 |
-| JD | [V2.4 Filament runout sensor](JD/RefillPlease) | Replace the 2.4 stock bowden tube holder and add a filament runout... | V1.8, V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| JJFX | [V2.4 CR Touch Snap Mount](JJFX/CRTouch_Snap_Mount) | Mount to replace v2.4 (MGN9) probe with a Creality CR Touch | V2.4 | 2023-08-23 23:08:13 +0000 |
-| JNP | [Back Door](JNP/Back-Door) | Door for easy hardware access | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Deck Panel](JNP/Deck_Panel_Rear) | Covers the hotbed cables | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Drawer](JNP/Drawer) | Drawer in four different versions | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Front Door](JNP/Front-Door) | Door in a frame | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Hepa Filter](JNP/HEPA-Filter) | Filter case with fan´s | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Mid Panel](JNP/Mid-Panel) | Panel for SKR1.4/1.4 or SKR E3 mini mount | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Neopixel Case](JNP/Neopixel-Y_Rails) | mounting for Neopixel strip with 8 LED´s | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Side Panels](JNP/Side-Panels) | Panels with intergrated hinge | V0.2 | 2023-08-23 23:08:13 +0000 |
-| Jasrags | [Feed slot with filament pass-...](Jasrags/sw_fee_slot_filament_passthrough) | A feed slot with a filament pass-through | VSW | 2023-08-23 23:08:13 +0000 |
-| JeremyRuhland | [V2.4 Plug Panel Generic Combo](JeremyRuhland/V2.4_Plug_Panel_Generic_Combo) | Skirt power panel for generic amazon plug/switch/fuse combo module,... | V2.4 | 2023-08-23 23:08:13 +0000 |
-| Jon | [1515 LED Mount](Jon/1515_led_mount) | Snap in 1515 Led mount for WS2812B | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Z Cover for v0.1](Jon/V0.1_Z_Cover) | A cover to stop things from dropping down the Z motor and... | V0.1 | 2023-08-23 23:08:13 +0000 |
-|  | [adxl345 skirt keystone](Jon/adxl345_skirt_keystone) | Skirt keystone for ADXL345 using Microfit 3.0 | V2.4 | 2023-08-23 23:08:13 +0000 |
-| JosAr | [Klicky Probe](JosAr/Klicky-Probe) | Microswitch based inductive probe replacement | V0.2, V1.8, V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| KenadyDwag44 | [Switchwire Lightbar](KenadyDwag44/sw_lightbar) | A LED lightbar for switchwire | VSW | 2023-08-23 23:08:13 +0000 |
-| KevinAkaSam | [VEFACH](KevinAkaSam/VEFACH) | Voron Exhaust Filter Inserts for Activated Coal + Hepa | V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| KiloQubit | [V0 Reverse Bowden Mount](KiloQubit/V0_reverse_bowden_mount) | V0 reverse bowden mount | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [V2.4 Z Chain Mounts for 3 Hole...](KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts) | Z chain mounts for 3 hole generic chain | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Trident Schurter Inlet Skirt](KiloQubit/trident_schurter_power_inlet) | Trident inlet skirt for mounting a Schurter DD11.0124 or similar inlet | VT | 2023-08-23 23:08:13 +0000 |
-| Koios | [6mm Tempered Glass Mod](Koios/6mm_Glass) | Lock levers and rests for 6mm Tempered glass panels | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [C920 Low Profile Mount](Koios/C920_Mount) | Low profile mount for a C920 Webcam | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [LED Bar Mounts](Koios/LED_Mounts) | Low profile mount for led bar lights | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [V0 C920 Tophat Mount](Koios/V0_C920_Tophat_Mount) | Mounting bracket for a Logitech C920 on the tophat | V0.2 | 2023-08-23 23:08:13 +0000 |
-| Kosh42EFG | [Kirigami bed front](Kosh42EFG/kirigami_bed_front) | Printed bed front for kirigami folded metal bed mount with Voron logo. | V0.2 | 2023-08-23 23:08:13 +0000 |
-| Kruppes | [Encosed Bottom](Kruppes/Closed_Bottom) | Modified printed parts and panel to fully enclose V0. | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [V0 Printed Deck with inserts](Kruppes/Deck_Panel_inserts_logo) | Electronics Deck Panel using brass heat inserts. Optional with... | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Belt Tension Meter](Kruppes/Tension_Meter) | Print in place tension meter to easily tighten multiple belts to... | V0.2, V1.8, V2.4, VSW | 2023-08-23 23:08:13 +0000 |
-| Kyleisah | [CableGator Cable Comb](Kyleisah/CableGator) | A cable comb for simplifying and tidying wire harnesses for... | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-| LJ | [Scrubby](LJ/Scrubby) | Easy to use filament dust filter | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-| Le0n | [Magnetic panels with Magnet Inserts](Le0n/Magnetic_Panels_with_Magnet_Inserts) | Magnetic panel mounts with magnets inserted into frame slots. | V1.8, V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| LoCoCNC | [3mm Top Hat Panels Clips](LoCoCNC/3mm_tophat_panel_parts) | Required to use the 3mm (1/8") thick top hat panels for V0.1 | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [MGN7H Shims](LoCoCNC/MGN7H_Shims) | Shims for making bearing cartridges coplanar | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Mosquito PTFE 15mm Tube Cutting Jig](LoCoCNC/Mosquito_PTFE_Cutting_Jig) | Tool to precicely cut 15mm PTFE Tube | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Strain Relief w/ 10 Pin Microfit](LoCoCNC/Strain_Relief_w_Microfit) | Strain Relief with 10 pin Microfit connector | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [SSR Mounting Strap](LoCoCNC/ssr_strap) | Mounting Strap for SSR on 1515 Extrusions | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [V2.4 Bed Wiring Grommet](LoCoCNC/wire_grommets) | Safely capture your bed wires thru the bottom panel | V2.4 | 2023-08-23 23:08:13 +0000 |
-| LoganFraser | [ComboInlet](LoganFraser/ComboInlet) | Skirt pieces for Trident, 2.4 and 2.4r2 for combo inlets in 2 sizes. | V2.4, VT | 2023-08-23 23:08:13 +0000 |
-|  | [HorseshoeSpoolHolder](LoganFraser/HorseshoeSpoolHolder) | Horseshoe Spool Holder - mounts internally for Trident, or... | V0.2, V1.8, V2.4, VT | 2023-08-23 23:08:13 +0000 |
-|  | [PiPlate](LoganFraser/PiPlate) | PiPlate - Raspberry Pi3,4 mounting plate and Skirt Mod for... | V2.4, VT | 2023-08-23 23:08:13 +0000 |
-|  | [Trident Inverted Electronics](LoganFraser/TridentInvertedElectronics) | Flip the Trident electronics bay for top access. | VT | 2023-08-23 23:08:13 +0000 |
-|  | [WagoMounts](LoganFraser/WagoMounts) | Wago Mounts for Din Rail or 2020 Extrusion mounting. | V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-| Long | [Mantis Dual 5015 Toolhead](Long/Mantis_Dual_5015) | MGN12 Dual 5015 Toolhead for 2.4 & 1.8 | V1.8, V2.4 | 2023-08-23 23:08:13 +0000 |
-| Lukas | [SSD1306 Case Front Cover](Lukas/SSD1306_Case_Front_Cover) | SSD1306 Mount replacement for Mini12864 | V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| MCMBen | [Voron0 Block & Tackle Z Belt](MCMBen/Voron0_Block_and_Tackle_Z_Belt) | A block & tackle belted Z solution using NEMA14. Ratios from 5:1 to... | V0.2 | 2023-08-23 23:08:13 +0000 |
-| MSA | [Belt tension helper](MSA/V0-Belt-tension-helper) | Belt tension helper for V0.1 | V0.2 | 2023-08-23 23:08:13 +0000 |
-| MSiemons | [Tophat Hinge V0](MSiemons/TophatHingeV0.1) | Simple hinge for V0 Tophat | V0.2 | 2023-08-23 23:08:13 +0000 |
-| Mac10goesBRRRT | [PiTFT Mount](Mac10goesBRRRT/BTT_PiTFT) | Mount for the BTT PiTFT Touchscreen | V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| Majarspeed | [Hartk board mount galileo](Majarspeed/Hartk_Mount_Galileo) | It hangs stuff on your tool | V2.4 | 2023-08-23 23:08:13 +0000 |
-| MakeALeft | [Switchwire Clean Center Grill](MakeALeft/Switchwire_Front_Grill) | Removed magnet holders on center panel for cleaner look |  | 2023-08-23 23:08:13 +0000 |
-| MasturMynd | [Stealth Zero](MasturMynd/Stealth_Zero) | A low poly gantry with front tensioners and optional front mounted... | V0.2 | 2023-08-23 23:08:13 +0000 |
-| MathematicalPotato | [V0.1 Belted Z Drive](MathematicalPotato/v0.1_belted_z_drive) | Conversion to a belted Z axis for the V0.1 adapted from... | V0.2 | 2023-08-23 23:08:13 +0000 |
-| Maverick | [MiniSB_LGXL](Maverick/MiniSB_LGX_Lite) | A Bondtech LGX Lite variant of the MiniSB | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-|  | [MiniSB_Rapido](Maverick/MiniSB_Rapido) | Modified MiniSB to use a Rapido hotend | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-|  | [MiniSB_Sharkfin](Maverick/MiniSB_Sharkfin) | Modified MiniSB to use a Sharkfin Extruder | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-|  | [V0.2 Handles](Maverick/V0.2_Handles) | Add handles to the extrusion tophat | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [V0.2 Stealth Skirts](Maverick/V0.2_Stealth_Skirts) | Juiced up skirts for the V0.2 | V0.2 | 2023-08-23 23:08:13 +0000 |
-| Mckurt | [Switchwire Y Belt Tensioner](Mckurt/Switchwire_Y_Belt_Tensioner) | Switchwie Y axis Belt Tensioner | VSW | 2023-08-23 23:08:13 +0000 |
-| Mellow | [V0 Fly-Gemini](Mellow/V0_Fly-Gemini) | Fly-Gemini adapted model for V0 | V0.2 | 2023-08-23 23:08:13 +0000 |
-| MikesMods | [LGX mount for V0.1 with 2nd X rail](MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail) | V0.1 mod for mounting Bondtech LGX extruder with addition of 2nd X... | V0.2 | 2023-08-23 23:08:13 +0000 |
-| Minsekt | [Rear Umbilical](Minsekt/Rear_Umbilical) | Rear Umbilical mounting solution including a relocated Y-Endstop | V2.4 | 2023-08-23 23:08:13 +0000 |
-| MrBean66 | [SKR Pro DIN Mount](MrBean66/SKR_PRO_Mount) | Simple mod to mount the SKR Pro board from BTT to a DIN rails. | V1.8, V2.4 | 2023-08-23 23:08:13 +0000 |
-| MrDespair | [MiniAB Pinda Probe Mount](MrDespair/MiniAB_Pinda) | Replacement MiniAB Cowling to add a mount for a Pinda style probe. | V0.2 | 2023-08-23 23:08:13 +0000 |
-| Mrgl-Mrgl | [LGX Lite Mount](Mrgl-Mrgl/LGX_Lite_Mount) | a mount for the LGX Lite | V1.8, V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| Nashuar | [V0 Dragon Toolhead M2.5x8](Nashuar/V0_Dragon_ToolheadStockScrews) | This toolhead uses the stock M2.5 screw that came with the dragon... | V0.2 | 2023-08-23 23:08:13 +0000 |
-| Nomsplease | [60mm Shaft Jig](Nomsplease/60mm_Shaft_Jig) | Simple jig for cutting and grinding 60mm Z shafts | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Duet Wifi Mount](Nomsplease/V0_Mods/duet_wifi_mount) | Duet wifi mount in pocketwatch location | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [LED Mounts](Nomsplease/V0_Mods/led_mounts) | Basic LED mounts for 10 and 12mm strips | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Remixed Panel Mounts](Nomsplease/V0_Mods/panel_mounts) | Remixed rear bottom panel mounts with stop | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Pi Cam/ZeroW Mount](Nomsplease/V0_Mods/pi_zero_camera_mount) | Mount for pi camera and ZeroW | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Pocket Watch Rear Reolcation...](Nomsplease/V0_Mods/pocket_watch_rear_relocation) | Pocket watch rear reolcation bracket | V0.2 | 2023-08-23 23:08:13 +0000 |
-| Oakman | [BTT 24V UPS Metal DIN Mount](Oakman/BTT_24V_UPS_Metal_DIN_Mount) | Adapter to use a metal DIN mount for the BTT 24V UPS | V1.8, V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [FYSETC Spider Metal DIN Mount](Oakman/FYSETC_Spider_Metal_DIN_Mount) | Use a metal DIN mount for your FYSETC Spider | V1.8, V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [RPI Metal DIN Mount](Oakman/RPI_Metal_DIN_Mount) | Adapter for metal DIN mounting the Raspberry Pi | V1.8, V2.4 | 2023-08-23 23:08:13 +0000 |
-| OboMaker3D | [C17-EXT Filter HEPA Carbon](OboMaker3D/C17-EXT) | Replaces standard filter with new HEPA Crabon and 120mm fan V1.1 | V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-|  | [C17-EXT-CARTRIDGE for C17-EXT...](OboMaker3D/C17-EXT-CARTRIDGE) | Alternative to a commercial cartridge for the C17-EXT filter | V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-| Phalanx | ["Other" Idlers Mod](Phalanx/Other-V2-Idlers) | Allow usage of wider toolheads on the V2 | V2.4 | 2023-08-23 23:08:13 +0000 |
-| Polar-Ted | [V0.1 Z nozzle endstop switch](Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch) | Sexbolt style switch for V0 | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [V0.1 Two Piece Back Panel](Polar-Ted/V0_Two_Piece_Back_Panel) | Vented 2 piece back panel for V0 | V0.2 | 2023-08-23 23:08:13 +0000 |
-| Polared | [Power Inlet with Keystone Insert](Polared/Power_Inlet_w_Keystone_Insert) | Voron 0.1 Power inlet with keystone insert slot | V0.2 | 2023-08-23 23:08:13 +0000 |
-| Printopal | [Magnetic top panel](Printopal/Magnetic_top_panel) | Top panel with magnets allows for quick installation and removal | V1.8, V2.4 | 2023-08-23 23:08:13 +0000 |
-| PsychoShaft | [C92X_PsycHoShafts_Mount](PsychoShaft/C92X_PsycHoShafts_Mount) | 2020 Top profile 920 camera mount / 2 point axis pivot | V1.8, V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| QuackProfit | [V0 Adafruit NeoPixel LED Mounts](QuackProfit/V0-Adafruit-Y_Rails) | Mount Adafruit PCB NeoPixel Sticks on the V0 Y-rail extrusions | V0.2 | 2023-08-23 23:08:13 +0000 |
-| Rhastlyn | [60mm Fan Cover](Rhastlyn/60mmFanCover) | A easy to install cover for spec 60mm fans originally designed for... | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Wansview 1080p Camera Mount](Rhastlyn/WansviewCameraMount) | A camera mount that replaces the OEM part to allow the camera to be... | V2.4 | 2023-08-23 23:08:13 +0000 |
-| RockNLol | [RockNRoll](RockNLol/RockNRoll) | Rockers to roll the printer on its back for easier access to the... | V2.4 | 2023-08-23 23:08:13 +0000 |
-| ScramblerUSA | [Side Skirt Power Switch](ScramblerUSA/SideSkirtPowerSwitch) | Skirt-mounted rocker switch for easy access for Voron 2.4 | V2.4 | 2023-08-23 23:08:13 +0000 |
-| See1807 | [TopHat Exhaust and LED Light](See1807/Voron_V0_Exhaust_and_LED_Mod) | A mount for 10mm LED strips and Exhaust for Voron V0 | V0.2 | 2023-08-23 23:08:13 +0000 |
-| Shiftingtech | [Trident Dual Power Switch](Shiftingtech/Trident_dual_power_switch) | A replacement skirt, allowing 2 power switches | VT | 2023-08-23 23:08:13 +0000 |
-| ShinyPants | [OrangePi 3 LTS DIN Rail bracket](ShinyPants/Orange_Pi_3_LTS_DIN) | A DIN rail mount for OrangePi LTS 3 | V1.8, V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| Shteeeeeve | [V0.1 LED Tophat](Shteeeeeve/V01-LED-Tophat) | V0.1 LED Tophat w/ 24V LED Lightstrip | V0.2 | 2023-08-23 23:08:13 +0000 |
-| Slidr | [PanzerBalls 2.4](Slidr/PanzerBalls2.4) | Squash Ball Feet for V2.4 | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [PanzerChain 2.4](Slidr/PanzerChain2.4) | Energychain for V2.4 | V2.4 | 2023-08-23 23:08:13 +0000 |
-| Spaghetti-Bolognese | [LCD Case Mod](Spaghetti-Bolognese/LCD_case_mod) | Improvements to the V2.4 mini12864 LCD case inc E-stop button cover | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Simplified Z Drive Motor Mount](Spaghetti-Bolognese/Z_drive_motor_mount) | Z drive motor mount bracket mod to improve pulley to belt alignment | V2.4 | 2023-08-23 23:08:13 +0000 |
-| StvPtrsn | [Skirts for a 320mm Build](StvPtrsn/320mm_Build) | Skirts for a 320mm build | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Keystone Jack for Filtered Mains...](StvPtrsn/Keystone_Jack_Filtered_Mains_Panel) | Add a keystone jack to your filtered mains plug panel | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Parts_Jigs and Mods](StvPtrsn/Parts_Jigs_and_Mods) | Parts, Jigs and modifications I use for my builds | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-|  | [Side Fan Support, No Tape](StvPtrsn/Side_Fan_Support_No_Tape) | Mount the 60mm side fans and inserts without tape | V2.4 | 2023-08-23 23:08:13 +0000 |
-| Takuya | [WANSVIEW USB Camera Mount](Takuya/USBCameraMount) | WANSVIEW 1080p Camera Mount for Voron 2.4 | V2.4 | 2023-08-23 23:08:13 +0000 |
-| TheSquiffy | [V0 Belts holder](TheSquiffy/V0_Belts_holder) | V0 Belts Holder | V0.2 | 2023-08-23 23:08:13 +0000 |
-| TiagoBarata | [Logitech C270 Mount](TiagoBarata/Logitech_C270_Mount) | Logitech C270 Top Center Mount | V2.4 | 2023-08-23 23:08:13 +0000 |
-| Tircown | [DIN mount RS-15-5 PSU](Tircown/DIN_mount_RS-15-5) | A DIN mount for the RS-15-5 | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Display mount 5"](Tircown/Display_mount_5inch) | Tiltable mount for a 5" tactile display | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Raspberry in plug panel](Tircown/Raspberry_plug_panel) | Raspberry mount vertically in the plug panel, allow easy access to... | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [V0.1 Skirt buttons](Tircown/V01_skirt_buttons) | Buttons for V0.1 spec skirts | V0.2 | 2023-08-23 23:08:13 +0000 |
-| Triano | [Ender 3 Pro or V2 to Switchwire Mod](Triano/Ender_3Pro_Switchwire) | Convesion of an Ender 3 Pro or V2 to a Switchwire | VSW | 2023-08-23 23:08:13 +0000 |
-| Ultrawaffles | [Ender 3 to SW conversion](Ultrawaffles/Ender_3_to_SW) | A conversion mod for the ender 3 to switchwire. Designed to allow... | VSW | 2023-08-23 23:08:13 +0000 |
-| VinnyCordeiro | [RGB LED grid for Stealthburner](VinnyCordeiro/RGB_LED_grid_for_SB) | A small RGB LED grid for Stealthburner's logo | V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-| Weaslus | [Electronics Bay and Enclosure...](Weaslus/Electronics-Bay-Seperator) | Better enclose chamber and keep heat from electronics | V0.2 | 2023-08-23 23:08:13 +0000 |
-| ZZP8202 | [Pull-out electrical store](ZZP8202/Pull-out_electrical_store) | Voron 2.4 Pull-out electrical store（350mm only） | V2.4 | 2023-08-23 23:08:13 +0000 |
-| Zen3D | [V0 1515 T-nut](Zen3D/V0_1515_T-nut) | M3 square and hex nuts for Voron0 1515 frame | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [V0 Handle](Zen3D/V0_Handle) | Voron0 Handle for 3mm panels | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [V0 MidPanel HexPattern](Zen3D/V0_MidPanel_HexPattern) | Voron0 MidPanel with Hex pattern and Wire cover | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [V0 Skirt set](Zen3D/V0_Skirt) | SSR, PowerSwitch, Adxl, Nameplate and color change printing | V0.2 | 2023-08-23 23:08:13 +0000 |
-| aTinyShellScript | [RS PSU DIN Bracket](aTinyShellScript/RS_PSU_DIN_Brackets) | DIN brackets for MeanWell RS PSUs with 80mm spacing. | V2.4 | 2023-08-23 23:08:13 +0000 |
-| ademuri | [Lights, Camera, Voron](ademuri/Lights_Camera_Voron) | A mount for LED strips and Picam for the V0.1 | V0.2 | 2023-08-23 23:08:13 +0000 |
-| aeresov | [MeanWell UHP-xxx DIN mount](aeresov/MeanWell_UHP_DIN_mount) | A bracket for MeanWell UHP series PSU (200, 350 and 500) to mount... | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Raspberry Pi DIN mount](aeresov/Raspberry_Pi_DIN_mount) | A bracket for Raspberry Pi 3/4 to mount it onto DIN rail, along or... | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [SKR 1.3/1.4 DIN mount](aeresov/SKR_DIN_mount) | A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or... | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [TL filament sensor bracket](aeresov/TL_filament_sensor_bracket) | A bracket for TL filament sensor to mount near stock spool holder. | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [cable tie DIN mount](aeresov/cable_tie_DIN_mount) | A bracket for cable ties to route cables across DIN rails. | V2.4 | 2023-08-23 23:08:13 +0000 |
-| al3ph | [Analog Timer Mount](al3ph/analog_timer_mount) | A skirt mount for analog timer | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Filament Runout Sensor](al3ph/filament_runout) | A simple filament runout sensor | V0.2, V1.8, V2.4, VSW | 2023-08-23 23:08:13 +0000 |
-|  | [LED Mount](al3ph/led_mount) | A mount for 10mm LED WS2812 strips | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [PL05 Sensor Mount](al3ph/pl05_mount) | A mount PL05 inductive sensor | V0.2 | 2023-08-23 23:08:13 +0000 |
-| alanho | [BTT PITFT50 v2 Mount](alanho/BTT_PITFT50_v2_Mount) | A mount for the BTT PITFT50 v2 Touch Display | V2.4 | 2023-08-23 23:08:13 +0000 |
-| albert | [IKEA Dioder Led Mount](albert/IKEA_Dioder_Led_Mount) | A mount for the IKEA Dioder LED strip | V2.4 | 2023-08-23 23:08:13 +0000 |
-| antoinecellerier | [DS18B20 Sensor Mount](antoinecellerier/ds18b20-sensor-mount) | DS18B20 temperature sensor mount | V0.2 | 2023-08-23 23:08:13 +0000 |
-| ardichoke | [V0 Long Thumb Nut](ardichoke/v0-long-thumb-nut) | Taller thumb nuts for V0 bed | V0.2 | 2023-08-23 23:08:13 +0000 |
-| arkeet | [Dial test indicator mount](arkeet/dti-mount) | A toolhead mount for a dial test indicator, where the tip is... | V1.8, V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Magnetic hotend fan cover](arkeet/magnet-fan-cover) | A replacement hotend fan cover, held with magnets instead of screws. | V1.8, V2.4, VSW | 2023-08-23 23:08:13 +0000 |
-|  | [MGN12 X-axis](arkeet/mgn12) | Replaces the dual MGN9H rails with a single MGN12H. | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [V0 DC inlet](arkeet/v0-dc-inlet) | Skirt inlet for external 24V DC power supply. | V0.2 | 2023-08-23 23:08:13 +0000 |
-| baccula | [Revo Nozzle Holder for v2.4 350](baccula/revo_skirt_nozzle_holder) | A remix of Andre's design allowing for skirt storage of 4 E3D Revo... | V2.4 | 2023-08-23 23:08:13 +0000 |
-| beaugalbraith | [Nova Printhead](beaugalbraith/Nova_Printhead) | Use Nova Hotend with Afterburner | V2.4 | 2023-08-23 23:08:13 +0000 |
-| bobbleheed | [Filament Runout Sensor](bobbleheed/Filament_Runout) | Filament runout sensor that replaces the stock bowden retainer | V1.8, V2.4, VT | 2023-08-23 23:08:13 +0000 |
-|  | [Magnetic Panels](bobbleheed/Magnetic_Panels) | Magnetic clips to allow for easy removal and installation of panels | V2.4 | 2023-08-23 23:08:13 +0000 |
-| btp | [Galileo chain mount (befenybay)](btp/Galileo_Switchwire_Chain_Mount) | Modified chain mount position to cater for difference with Galileo... | VSW | 2023-08-23 23:08:13 +0000 |
-| buzzdalf | [v1.8/2.4 Afterburner connector...](buzzdalf/connector_cover) | v1.8/2.4 Connector cover for 42STH20-1004AS | V1.8, V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Ender 3 Switchwire Taller Z Mod](buzzdalf/ender_switchwire_taller_z) | Taller Z Mod | VSW | 2023-08-23 23:08:13 +0000 |
-|  | [Ender 3 Switchwire Y Tensioner Mod](buzzdalf/ytension) | Y Tension Mod | VSW | 2023-08-23 23:08:13 +0000 |
-| bythorsthunder | [MGN9 Backers Idlers](bythorsthunder/MGN9_Backers) | New idler uppers for MGN9 Extrusion backers | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Stealthburner Rapido UHF](bythorsthunder/Stealthburner_Rapido_Uhf) | Stealthburner mod for Rapido UHF | V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-| chirpy | [V0.1 Nozzle Wiper](chirpy/NozzleWiper) | Servo powered nozzle wiper and purge bucket | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Runout UnKlicky Sensor](chirpy/RunoutUnklicky) | Runout UnKlicky Sensor is a filament runout sensor with mounts for... | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-|  | [V0.1 Raised Tophat](chirpy/TipTophat) | Alternative Tophat design that uses stock panels and raises height... | V0.2 | 2023-08-23 23:08:13 +0000 |
-| chri.kai.in | [20x20mm Profile Covers](chri.kai.in/20x20mm_Profile_Covers) | Provide overlapping and flush slot covers for 20x20mm slot6... | V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-|  | [Angry CAM USB](chri.kai.in/Angry_CAM_USB) | Housing for small USB camera module, allowing mounting to gantry or... | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Exhaust Adapter 100mm](chri.kai.in/Exhaust_Adapter_100mm) | Replace 60mm exhaust fan with 100mm ventilation system adapter | V1.8, V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| chrisrgonzales | [270° Front Panel Hinge](chrisrgonzales/270_degree_hinge) | Hinges that have 270° of swivel, parametric CAD included | V2.4 | 2023-08-23 23:08:13 +0000 |
-| christophmueller | [Phaetus and Zodiac Dragonfly BMO...](christophmueller/Phaetus_Dragonfly_BMO_Afterburner) | Covers both the original Phaetus variant as well as the Zodiac one. | V1.8, V2.4, VSW | 2023-08-23 23:08:13 +0000 |
-| claytono | [Voron 2.4 Extrusion Jig](claytono/2.4-extrusion-jig) | A jig help align extrusions to get a properly square frame | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Fysetc S6 V2 Mount](claytono/fysetc-s6-v2-mount) | DIN Mount for the Fysetc S6 V2 controller | V1.8, V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [V0 Zip Tie Skirts](claytono/v0-zip-tie-skirts) | V0 skirts with small loops added along the top to allow zip tyiing... | V0.2 | 2023-08-23 23:08:13 +0000 |
-| clee | [Monster8 DIN Rail Mounts](clee/Monster8_heatsert_mount) | DIN mount for Makerbase Monster8 V1/V2 controller | V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| cmrny | [V0.1 Motor Panel Modification](cmrny/v01_motor_panel_no_rub) | V0.1 Motor panel modification to keep umbilical and bowden tube... | V0.2 | 2023-08-23 23:08:13 +0000 |
-| conqueror433 | [Voron Parts Logo](conqueror433/Voron_Parts_Logo) | Voron Parts Logo for your back panels, 3D Print or Laser Cut | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Voron V0.1 Parts Logo](conqueror433/Voron_V0.1_Parts_Logo) | Voron Parts Logo for your V0 deck panel | V0.2 | 2023-08-23 23:08:13 +0000 |
-| consibonsi | [Y-Mod SW 9mm](consibonsi/Y-Mod_SW_9mm) | 9mm Y belt mod for SW | VSW | 2023-08-23 23:08:13 +0000 |
-| csch0 | [SW Fan Mount No Tape](csch0/SW_FanMount_No_Tape) | 60x20 Fan Mount for SW without tape | VSW | 2023-08-23 23:08:13 +0000 |
-| d3nny | [Filtered Power Plug with...](d3nny/mains_plug_panel_for_RND_165-00057) | Filtered Power Plug for RND 165-00057 and CAT6-Plug | V2.4 | 2023-08-23 23:08:13 +0000 |
-| davidauvergne | [Center_cable_management_duct](davidauvergne/Center_cable_management_duct) | Mod for a centered cable management | V2.4 | 2023-08-23 23:08:13 +0000 |
-| dePrintinator | [HEPA Exhaust](dePrintinator/HEPA_Filter_Exhaust) | HEPA filter chamber exhaust replacement. | V1.8, V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| deepfriedheroin | [v0 Wago Bed Mounts](deepfriedheroin/v0_bed_wagos) | Easy to install Wago mounts for the v0 | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [v0 Power Wagos](deepfriedheroin/v0_power_wagos) | Easy to install Wago mounts for v0 mains | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [V2 Bed Wagos](deepfriedheroin/v2_bed_wagos) | Wire management for the v2 bed | V2.4 | 2023-08-23 23:08:13 +0000 |
-| doubletrouble | [V0 Skirt Mod](doubletrouble/V0_Skirt_Mod) | V0 Skirt Mod | V0.2 | 2023-08-23 23:08:13 +0000 |
-| eamars | [Stealthburner (RC1) Dragon...](eamars/stealthburner_crazy_dragon_toolhead) | The Stealthburner toolhead mount for Mellow Crazy, TriangleLab... | V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-| eddie | [LED Bar Clip](eddie/LED_Bar_Clip) | Modular LED Clip for mounting LED Strip to 2020 Extrusions | V1.8, V2.4, VT | 2023-08-23 23:08:13 +0000 |
-|  | [V1.8 12mm Z Mod](eddie/V1.8_12mm_Z_Mod) | Add V1.8 option for 12mm Z rods | V1.8 | 2023-08-23 23:08:13 +0000 |
-| edwardyeeks | [Tridentified V2.4 Power Inlet](edwardyeeks/Tridentified_V2.4_Power_Inlet) | Trident style side power inlet for V2.4 using Z Drive Motor... | V2.4 | 2023-08-23 23:08:13 +0000 |
-| elcrni | [Trident Internal Spool Holder](elcrni/Trident_Internal_Spool_Holder) | Internal spool holder for 300 and 350 Tridents. Supports full size... | VT | 2023-08-23 23:08:13 +0000 |
-|  | [V.24/Trident Spool Holder](elcrni/V2.4-Trident-Spool-Holders) | Spool holder that mounts on top for "too close to the wall" printers | V1.8, V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| evandepol | [Crydom GN Terminal Guard](evandepol/Crydom-GN-Guard) | A simple safety guard for the terminals on a Crydom GN SSR | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Voron 2.4 cable clamps](evandepol/Voron2.4-Cable-clamps) | A set of 2020-mounted cable guards to organize and dress the wiring... | V2.4 | 2023-08-23 23:08:13 +0000 |
-| falo | [LGX Lite CAN Side Mount](falo/lgx_lite_side_can) | A side mounting for a CAN board (Huvud/SHT42) to the LGX Lite | V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-|  | [Magnetic Exhaust Grill Cover](falo/magnetic_grill_cover) | A magnetic cover to seal the filtered exhaust | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Toolhead PCB to CAN Mount Adaptor](falo/toolhead_pcb_to_can) | A mount to enable side mounting of a CAN board (Huvud/SHT42) in... | V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-| filotto78 | [6mm slot cover](filotto78/6mm_slot_cover) | Simple cover for extrusion with 6mm slot width | V2.4 | 2023-08-23 23:08:13 +0000 |
-| gamebofh | [Laser cut door panels](gamebofh/door-panels) | Files to allow you to create laser cut door panels with some... | VSW | 2023-08-23 23:08:13 +0000 |
-| gauravmm | [Crazy Mozzie HF toolhead SB+CW2](gauravmm/crazy_mozzie_cw2) | Toolhead for Crazy Mozzie HF, compatible with Stealthburner and... | V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-| gen2eng | [Switchwire LED wire pass through](gen2eng/z_carriage_stop_pass_through) | Z Carriage Stop modification that makes pass through of wires for... | VSW | 2023-08-23 23:08:13 +0000 |
-| geoffreyyoung | [Dual Rail Installation Guide](geoffreyyoung/dual_rail_guide) | Rail installation guide that also works for the 2.4 dual rail... | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [LGX Info, Links, and Models](geoffreyyoung/lgx) | Useful information and models for using the Bondtech LGX extruder... | V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-| gerritwellen | [Manta M8P Mount](gerritwellen/manta-m8p-bracket) | Mounting Bracket for BTT Manta M8P | V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| golas | [V0.1 Extended tophat hinge](golas/v0-extended-tophat-hinge) | Extended tophat for v0.1 with hinges (integrated or screwed ones). | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [V0.1 Trident skirt remix with...](golas/v0-trident-skirt-mix) | Trident style v0.1 skirt mix with 12864 Mini Lcd on front or plain... | V0.2 | 2023-08-23 23:08:13 +0000 |
-| hartk1213 | [Voron0.2 2.8 Waveshare Display](hartk1213/Voron0.2_2.8_WaveshareDisplay) | 2.8 Waveshare display for V0.2 | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Voron0.2 Rear Keystone Skirt](hartk1213/Voron0.2_Rear_Keystone_Skirt) | Added keystone slot on rear skirt for V0.2 | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Voron0 C14Inlet](hartk1213/Voron0_C14Inlet) | Added a new Power inlet that uses a Fused C14 plug and switch that... | V0.1 | 2023-08-23 23:08:13 +0000 |
-|  | [Voron0 ExtendedLegs](hartk1213/Voron0_ExtendedLegs) | New extended legs to raise the printer up a tiny bit more | V0.1 | 2023-08-23 23:08:13 +0000 |
-|  | [Voron0 ExtrusionSkirt](hartk1213/Voron0_ExtrusionSkirt) | Created a new skirt design that uses 50mm extrusions as legs and it... | V0.1 | 2023-08-23 23:08:13 +0000 |
-|  | [Voron0 Hinged Top Hat](hartk1213/Voron0_Hinged_Top_Hat) | Created a new hinged top hat design for the V0 so it can fold away... | V0.1 | 2023-08-23 23:08:13 +0000 |
-|  | [Voron0 MGN9C X Axis](hartk1213/Voron0_MGN9C_X_Axis) | This mod, replaces the stock MGN7H for MGN9C on the V0 | V0.1 | 2023-08-23 23:08:13 +0000 |
-|  | [Voron0 deck panel](hartk1213/Voron0_deck_panel_with_logo_and_VORON0) | Used @Kruppes blank deck panel to add the logo as well as the name... | V0.1 | 2023-08-23 23:08:13 +0000 |
-|  | [Voron0 display dualcolor](hartk1213/Voron0_display_dualcolor) | Added a dual color file for the Voron Display Front housing | V0.1 | 2023-08-23 23:08:13 +0000 |
-|  | [Voron2.4 GE5C](hartk1213/Voron2.4_GE5C) | This mod replaces the stack of printed z joints with a metal... | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Voron2.4 SexBolt ZEndstop](hartk1213/Voron2.4_SexBolt_ZEndstop) | This mod replaces stock V2 Z endstop with a different style | V2.4, VT | 2023-08-23 23:08:13 +0000 |
-|  | [Voron2.4 and Trident Pins Mod](hartk1213/Voron2.4_Trident_Pins_Mod) | This mod replaces all the M5 screws for all idlers/pulleys/bearings... | V2.4, VT | 2023-08-23 23:08:13 +0000 |
-|  | [Voron2.4 Y Endstop Relocation](hartk1213/Voron2.4_Y_Endstop_Relocation) | This mod relocates the Y endstop to the top A drive piece | V2.4 | 2023-08-23 23:08:13 +0000 |
-| henrikssn | [Parametric Spool Holder](henrikssn/parametric_spool_holder) | Spool holder where the length is a parameter. | V1.8, V2.4, VT | 2023-08-23 23:08:13 +0000 |
-|  | [Plug Panel Mod for Generic...](henrikssn/plug_panel_generic) | v2.4 plug panel for generic unfiltered modules with 66mm x 27mm... | V2.4 | 2023-08-23 23:08:13 +0000 |
-| hergtoler | [Exhaust Housing for 120mm Fan...](hergtoler/exhaust_120mm_duct) | v2.4 Exhaust Housing for 120mm Fan and 4in Duct | V2.4 | 2023-08-23 23:08:13 +0000 |
-| hernsl | [Bottom Panel Mag Clip](hernsl/bottom_panel_mag_clip) | v2.4 magnetic clips to retain bottom panel | V2.4 | 2023-08-23 23:08:13 +0000 |
-| hhammarstrand | [Afterburner connector cover for...](hhammarstrand/afterburner_connector_cover_42STH20-1004AS) | Connector cover for 42STH20-1004AS | VSW | 2023-08-23 23:08:13 +0000 |
-| hijax_pl | [Corner panel clip](hijax_pl/corner_panel_clip) | V2 panel corner frames using 3-way L brackets in the corners | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Din Rail mount](hijax_pl/din_rail_mount) | Adapter to attach DIN Rail to 2020 extrusion. | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Controler Board adapters](hijax_pl/ender_compatible_controller_mount) | DIN (rotated) and legacy adapters for boards like SKR mini E3. | V2.4 | 2023-08-23 23:08:13 +0000 |
-| hoschi | [FYSETC Spider DIN Rail Mount](hoschi/FYSETC_Spider_DIN_Mount) | DIN rail mount for FYSETC Spider | V2.4 | 2023-08-23 23:08:13 +0000 |
-| hymness1 | [10x11mm chain VSW](hymness1/10x11mm_chain_VSW) | Printable and openable 10x11mm chain | V0.2, VSW | 2023-08-23 23:08:13 +0000 |
-|  | [Quickdraw probe Voron Switchwire](hymness1/Quickdraw_probe_Voron_Switchwire) | Detachable magnetic probe with docking system for VSW | VSW | 2023-08-23 23:08:13 +0000 |
-| iblue | [V0.1 Tophat Extractor](iblue/TophatExtractor) | Tophat Extractor for the Voron V0.1 with activated charcoal and... | V0.2 | 2023-08-23 23:08:13 +0000 |
-| jappaj | [V0.1 FanSaver](jappaj/FanSaver) | A printable fix for overheating V0.1 blower fans | V0.2 | 2023-08-23 23:08:13 +0000 |
-| jasonc | [V2.4 Z-Idler Shoulder Bolt Mod](jasonc/Z_Idler_Shoulder_Bolt) | Modification to the idler carriers to accept a 25mm shoulder bolt.... | V2.4 | 2023-08-23 23:08:13 +0000 |
-| jatson | [Plug panel mod for Schurter...](jatson/plug_panel_schurter) | A modified plug panel for Voron 2.4r1 with Schurter CD44.1101.151... | V2.4 | 2023-08-23 23:08:13 +0000 |
-| jaysuk | [4.3 Fly Screen Mount](jaysuk/4.3_fly_screen_mount) | A mount for a 4.3" Fly Screen | V0, V0.1 | 2023-08-23 23:08:13 +0000 |
-| jeoje | [4.3" Touchscreen Mount](jeoje/4.3_Inch_Touchscreen_Mount) | Mounts a [Waveshare 4.3inch Capacitive Touch... | V2.4, VSW | 2023-08-23 23:08:13 +0000 |
-|  | [Molex MLX and Microfit 3.0 Bed...](jeoje/Molex_MLX_Microfit_Bed_Connector_Mount) | Solid mount your bed connectors | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Sturdy Handles](jeoje/Sturdy_Handles) | Modified v2.2 handles with no panel rest and with 4 anchor points | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [V2.4 Z Chain Guide with...](jeoje/Z_Chain_Guide_Thermistor_Mount) | Modifies the Z chain guide to hold a chamber thermistor | V2.4 | 2023-08-23 23:08:13 +0000 |
-| jgehrig | [V0 LCD Touchscreen Skirt](jgehrig/v0_lcdskirt) | 3.2" LCD Touch Screen Skirt | V0.2 | 2023-08-23 23:08:13 +0000 |
-| johanncc | [Raspberry Pi Camera Mount](johanncc/Raspberry_Pi_Camera_Mount) | Low profile raspberry pi camera mount | V0.2 | 2023-08-23 23:08:13 +0000 |
-| joposter | [V0 Clippable LED Caselight](joposter/v0_clippable_ledmounts) | LED Case light for the V0 that clips into the extrusions | V0.2 | 2023-08-23 23:08:13 +0000 |
-| kageurufu | [Euclid Probe Carriage](kageurufu/mgn12-euclid) | A MGN-12 carriage with an inset mount for a Euclid Probe | V1.8, V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| khay | [Fan for V2-200mm²](khay/V2-200_4020_Electronics_Fan) | Middle Skirt for V2-200mm² Electronics Compartment | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [3x Keystone PlugPanel](khay/V2_3x_Keystone_Plugpanel) | PlugPanel with Options for 3 Keystones | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [V0 Micro Backplate](khay/micro_backplate) | Minimalistic backplate for cooler motors and electronics | V0.2 | 2023-08-23 23:08:13 +0000 |
-| kirby | [V0 Sherpa Mini Direct Drive Mod](kirby/v0_sherpa_mini_direct_drive) | A direct drive mod for the V0 using the Annex Sherpa Mini extruder | V0.2 | 2023-08-23 23:08:13 +0000 |
-| lakai | [Bruag Skirts](lakai/Bruag_Skirts) | V2 350mm skirts inspired by Bruag Facades | V2.4 | 2023-08-23 23:08:13 +0000 |
-| leandromarceddu | [PowerSkirt](leandromarceddu/PowerSkirt) | Modified skirtpiece for a digital power monitor | V2.4 | 2023-08-23 23:08:13 +0000 |
-| littleferris | [V0 c14 Skirt Inlet](littleferris/V0_Skirt_Inlet) | V0 C14 Skirt inlet | V0.2 | 2023-08-23 23:08:13 +0000 |
-| madfabrications | [Vertical PSU Mount](madfabrications/Vertical_PSU_Mount) | Mounts the PSU vertically on the DIN rails | V2.4 | 2023-08-23 23:08:13 +0000 |
-| madros | [V0 OLED-skirt](madros/V0_skirt_OLED) | V0 skirt with 0.96" OLED | V0.2 | 2023-08-23 23:08:13 +0000 |
-| maximilian-foerg | [Afterburner Turbo Mod](maximilian-foerg/AB_Turbo_Mod) | A purely cosmetic mod for Afterburner | V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-|  | [Switchwire Double 60mm Fan Mount](maximilian-foerg/VSW_Double_60mm_Fan_Mount) | A mount for two (or four) 60mm fans in SW's electronics compartment | VSW | 2023-08-23 23:08:13 +0000 |
-| mikepthomas | [MKS Mosfet Mount](mikepthomas/MKS_Mosfet_Mount) | MKS Mosfet Mount based of the Trident Raspberry Pi Mount. | V1.8, V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| mjoaris | [10x11 Cable Chain Endcaps](mjoaris/10x11_Cable_Chain_Endcaps) | Printable Endcaps for 10x11 Cable Chains | V1.8, V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Mini12864 LCD Mount](mjoaris/Mini12864_LCD_Mount_for_V2.4) | Swiveling case for the Fysetc Mini12864 LCD | V2.4 | 2023-08-23 23:08:13 +0000 |
-| mosher | [Door hinges with M3 screws shafts](mosher/m3_door_hinges) | Simple mod of print in place door hinges, which uses m3 screws as... | V2.4 | 2023-08-23 23:08:13 +0000 |
-| mpfl | [V0.1 OLED-skirt](mpfl/V0.1_skirt_OLED) | V0.1 skirt with 0.96" OLED | V0.2 | 2023-08-23 23:08:13 +0000 |
-| muradir | [Zodiac BMO Stealthburner Toolhead](muradir/Zodiac_BMO_Stealthburner_Toolhead) | A Stealthburner toolhead for the Zodiac BMO Hotend, based on the... | V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-| natewalck | [V1.8 Jigs](natewalck/v1.8_Jigs) | Jigs for assembling V1.8 | V1.8 | 2023-08-23 23:08:13 +0000 |
-| nhchiu | [V0.1 Movable Pulley Z Drive](nhchiu/V0.1_Movable_Pulley_Z) | A movable pulley system on the Z axis with 1:8 total speed ratio... | V0.1 | 2023-08-23 23:08:13 +0000 |
-| nikolasbabetas | [Neopixel Holder](nikolasbabetas/Neopixel_Holder) | A holder to attach Neopixel/WS2812B Led Strips to the V0.1 | V0.1 | 2023-08-23 23:08:13 +0000 |
-| ommy | [roller brackets](ommy/roller_brackets) | Brackets to help rolling V2 on its side. | V2.4 | 2023-08-23 23:08:13 +0000 |
-| oxno | [RBP Zero Bracket](oxno/rbp_zero_braket) | Bracket for Raspberry pi zero. | V1.8, V2.4 | 2023-08-23 23:08:13 +0000 |
-| padok | [Chain Anchor - ADXL345 mount Mod](padok/chain_anchor-ADXL345_mount) | A ADXL345 mount for the Afterburner | V2.4 | 2023-08-23 23:08:13 +0000 |
-| piet206 | [V1.8 Z Rails Mod](piet206/V1.8._Z_Rails_Mod) | Add MGN12H linear rails for Z axis motion | V1.8 | 2023-08-23 23:08:13 +0000 |
-| prasadp4009 | [StealthBurner CR Touch Mod](prasadp4009/SW_SB_CRTouch) | Voron SW StealthBurner CR Touch Mod | VSW | 2023-08-23 23:08:13 +0000 |
-| quattroerik | [V2.4 Door Hinge M3 3mm 180deg](quattroerik/front_door_m3_180_deg_3mm) | Voron 2.4 door hinges for 3mm panel, 180 deg opening and m3 screw... | V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| randell | [Door Hinges](randell/Door_Hinges) | Door hinges that use an M3 bolt for a pin and bolts thru the panel | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Microswitch Pod for PCB](randell/Microswitch_Endstop) | Modified endstop pod for use of endstop switches mounted on a PCB | V2.4 | 2023-08-23 23:08:13 +0000 |
-| raymondh | [Large Spool Holders](raymondh/LargeSpoolHolders) | Larger spool holders for KVP spools | V1.8, V2.4 | 2023-08-23 23:08:13 +0000 |
-| reQu1em00 | [Kirigami LED Bed Front](reQu1em00/Kirigami_LED_Bed_Front) | Kirigami bed front with space for a single LED or Neopixel button | V0.2 | 2023-08-23 23:08:13 +0000 |
-| reapola | [MKS CANable Pro DIN Mount](reapola/MKS_CANable_Pro_mount) | MKS CANable Pro mount which mounts on a DIN rail | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-| revnull | [Raspberry Pi 7inch Display Mount](revnull/rpi_7in_display_mount) | An articulating mount for the offical Raspberry Pi 7inch touch screen | V2.4 | 2023-08-23 23:08:13 +0000 |
-| richardjm | [ADXL drag chain mount](richardjm/adxl-chain) | Permanent mount for ADXL boards on the back of the motor, replacing... | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Back blanking plate](richardjm/back-plate) | Back blanking plate that can be used instead of the exhaust filter... | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [LED 15.5mm quarter round mounts](richardjm/led-mounts) | Mounting corners with integrated cable runs for 15.5mm quarter... | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Picam corner mount](richardjm/picam-corner) | Out of the way corner mounted picam | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Printable snap latches for 2020...](richardjm/snap-latch-2020) | Quick release panel latch inspired by the work of others. | V2.4 | 2023-08-23 23:08:13 +0000 |
-| rngSplat | [Printable Switchwire Deck Plate](rngSplat/SW_Deck_Plate) | Print a deck plate for Switchwire with debossed Voron logo | VSW | 2023-08-23 23:08:13 +0000 |
-| roboticator24 | [Touchscreen for OctoDash](roboticator24/4inch_touchscreen_mount_for_v2.4) | Mount a 4-inch LCD touchscreen to your V2.4 in place of the usual... | V2.4 | 2023-08-23 23:08:13 +0000 |
-| rsheng118 | [BTT octopus DIN vertical mount](rsheng118/BTT_octopus_DIN_vertical_mount) | DIN vertical mount for Big Tech Tree Octopus board | V2.4 | 2023-08-23 23:08:13 +0000 |
-| ryandam | [Cable Management Duct](ryandam/Cable_management_duct) | Zip tie mount intergrated cable duct to hide your cable | V0.2 | 2023-08-23 23:08:13 +0000 |
-| sammynorway | [LGX stealthburner connector cover](sammynorway/LGX-stealthburner-connector-cover) | Cable cover for LGX and stealthburner | V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-| samwiseg0 | [4 Channel Relay Under Deck Mount](samwiseg0/4channel_relay_under_deck_mount) | Mod to mount a 4 channel GPIO controlled relay | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [AB Plug (Microfit 1x4)](samwiseg0/ab_plug_microfit_1x4) | Mod to mount A & B motor connectors to the gantry | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Corner Cable Hide/Cover (LED Wires)](samwiseg0/corner_cable_hide) | Mod to hide cables around z idlers | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [ESP8266 NodeMCU Din Mount](samwiseg0/esp8266_nodemcu_din_mount) | Din mount for ESP8266 NodeMCU | V2.4, VT | 2023-08-23 23:08:13 +0000 |
-|  | [Extrusion/Chamber Thermistor Mount](samwiseg0/extrusion_thermistor_mount) | Extrusion mount for a NTC100K Thermistor extrusion | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-|  | [LRS PSU Screw Terminal Cover](samwiseg0/lrs_screw_terminal_cover) | Mod to cover the screw terminals for several LRS style PSUs | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-|  | [Microfit 2x3 Skirt Connector (ADXL)](samwiseg0/microfit_2x3_skirt_connector_adxl) | Mod for a Microfit 2x3 connector to be mounted in a skirt | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Corsair Flash Voyager GTX Din Mount](samwiseg0/voyager_gtx_din_mount) | Din carrier for a Corsair Flash Voyager GTX | V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| scanlory | [Clip-On Front Door Frame](scanlory/clip_on_door_frame) | Clip-on frame to stiffen and seal front door panels when using... | V2.4 | 2023-08-23 23:08:13 +0000 |
-| slitte | [PCB_Probe](slitte/PCB_Probe) | PCB for BAT85 and pull up resistor | V2.4, VT | 2023-08-23 23:08:13 +0000 |
-|  | [ssd_bracket](slitte/ssd_bracket) | bracket for mounting a 2.5" ssd to a din rail | V2.4, VT | 2023-08-23 23:08:13 +0000 |
-| sloscotty | [Switchwire Wall Plate](sloscotty/SW_Wall_Plate) | SW plate for enclosure | VSW | 2023-08-23 23:08:13 +0000 |
-|  | [NoNutz TopHat Cam Extension](sloscotty/TopHat_Cam_Extension) | Tophat extension with integrated webcam for V0/0.1 | V0.2 | 2023-08-23 23:08:13 +0000 |
-| spacelab2021 | [Orbiter Clockwork Mount](spacelab2021/Orbiter-Clockwork) | A clockwork adaptor for the Orbiter v1.5 Extruder with full... | V1.8, V2.4, VSW, VT | 2023-08-23 23:08:13 +0000 |
-| sse018 | [Octopus DIN Rail bracket](sse018/Octopus_DIN_Rail_bracket) | A Din rail mount for BTT Octopus board | V2.4 | 2023-08-23 23:08:13 +0000 |
-| strayr | [Creality toolhead for stealthburner](strayr/stealthburner_creality_toolhead) | Use a creality ender 3 style hotend with stealthburner | V1.8, V2.4, VSW | 2023-08-23 23:08:13 +0000 |
-| sttts | [Waveshare 5.5inch HDMI AMOLED Mount](sttts/Waveshare-5.5-inch-HDMI-AMOLED) | Mod to mount a Waveshare 5.5inch full HD display on a V2 | V2.4, VSW | 2023-08-23 23:08:13 +0000 |
-| tallman5 | [Z Locks](tallman5/z-locks) | Helping hands curing v2.4 build, replaces long zip ties. | V2.4 | 2023-08-23 23:08:13 +0000 |
-| tameike | [Din Rail 2020 Holder](tameike/DIN_Rail_2020_holder) | Attaching DIN Rails to 2020 | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Din Rail SKR 90 deg](tameike/DIN_Rail_SKR_1.3_90deg) | SKR V1.3 bracket turned 90 degrees | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Jetpack V0 base](tameike/Jetpack_V0) | Attach Jetpack to V0 frame | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [TacoRaven Mounting Frame](tameike/V0_TR_Mounting_Frame) | TR V0 mount | V0.2 | 2023-08-23 23:08:13 +0000 |
-| tayto-chip | [V2.4 Skirt Switch Mod](tayto-chip/skirt_switch_mod) | Add a ON/OFF Switch to side or front skirts | V2.4 | 2023-08-23 23:08:13 +0000 |
-| teookie | [AB dial indicator mount](teookie/AB_dial_indicator_mount) | Mount for attaching standard dial indicators to AB | V1.8, V2.4, VSW | 2023-08-23 23:08:13 +0000 |
-|  | [SKR Brace](teookie/skr_brace) | Rigidize and stabilize SKR 1.4 mounts | V2.4 | 2023-08-23 23:08:13 +0000 |
-| th0mpy | [BEEFY Din Clips](th0mpy/beefy-din) | Two piece BEEFY Din Clips, holds stronger | V2.4 | 2023-08-23 23:08:13 +0000 |
-| togi | [Exhaust housing side fitting](togi/exhaust_housing_side_fitting) | Moves the exhaust housing bowden fitting 90 degrees to allow the... | V2.4 | 2023-08-23 23:08:13 +0000 |
-| top_gun_de | [mount_for_umbilical](top_gun_de/mount_for_umbilical) | Umbilical guide that goes on the chain anchor | V2.4 | 2023-08-23 23:08:13 +0000 |
-| warriorofwire | [Slenderfan for Afterburner](warriorofwire/slenderfan) | Lighter, quieter, smaller Afterburner | V2.4 | 2023-08-23 23:08:13 +0000 |
-| whoppingpochard | [Extrusion Backers](whoppingpochard/extrusion_backers) | Laser-cut metal pieces to counteract bimetallic frame warping | V2.4 | 2023-08-23 23:08:13 +0000 |
-| wile-e1 | [Deck Panel Support Clips](wile-e1/Deck_Panel_Support_Clips) | Clips to help support lower deck panels to prevent (or fix) warping: | V1.8, V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Stealthburner + CW1 + PCB Cover](wile-e1/Stealthburner_CW1_PCB_Cover) | Low-poly for Stealthburner + CW1 + PCB installations: | V1.8, V2.4, VSW | 2023-08-23 23:08:13 +0000 |
-| wrez | [V0 Alternate IEC 320 C14 Power...](wrez/astrodyne-inlet) | Drop in replacement for alternate-source power inlet if spec inlet... | V0.2 | 2023-08-23 23:08:13 +0000 |
-| xbst_ | [ADXL345 V0 Mount](xbst_/ADXL345_V0_Mount) | V0 Mount for a ADXL345 module | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Car Hood Style Bed Hinge](xbst_/Bed_Hinge) | A way of reaching electronics from the top by having a "car hood"... | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Duct Mount](xbst_/Duct_Mount) | 100mm/4" ducting mount for ventilation. Also supports umbilical... | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [DuetZero](xbst_/DuetZero) | Pi Zero mount over a Duet2 for space saving | V0.2, V1.8, V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [Easy Access Rear Panels](xbst_/Easy_Access_Rear_Panels_v0) | New rear panels designed to expose the extruder for easy filament... | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Flat V2.4 Skirts](xbst_/Flat_Skirts) | Flat V2.4 Skirts so a panel without cutouts can be used | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [HOYMK SSR Mount](xbst_/HOYMK_SSR_Mount) | Mount for Chinese HOYMK SSR | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Hat LED Mount](xbst_/Hat_LED_Mount) | Top Hat LED module mount | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [PCB LED Holder](xbst_/LED_Holder) | Very simple mount for some (?) PCB LED Bars | V1.8, V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [DIN Mount Max31865](xbst_/Max31865_DIN_Mount) | A simple DIN rail mount for the Adafruit (or SAME SIZE clone)... | V1.8, V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [DIN Mount Omron Relay](xbst_/Omron_DIN_Mount) | A simple DIN rail mount for the BOM Relay | V1.8, V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [DIN Mount Pi 4x Relay Board](xbst_/Relay_DIN_Mount) | A simple DIN rail mount for the 4 channel relay board for Raspberry Pi | V1.8, V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [V0 Electronics Cover](xbst_/V0_Electronic_Panel) | A printed cover for v0 electronics. Requires larger printer to print. | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Mobius 4 (M4) V0 Mod](xbst_/V0_M4_Mod) | Mod to mount a M4 extruder to a Voron 0 where pocketwatch extruder... | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [V0 PiCam Mount](xbst_/V0_Picam) | A Raspberry Pi Camera Mount For V0 | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [Screwed Front Door Hinge](xbst_/V0_Screw_Front_Hinge_Mod) | Mod to screw the front door panel (instead of VHB) | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [V0 Buttons & OLED Mount](xbst_/V0_Skirt_Buttons) | Mod to mount custom Gcode macro buttons & Waveshare 1.3" OLED display | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [V2.4 Fanless Middle Skirt](xbst_/V2.4_Fanless_Middle_Skirt) | A Fanless alternative middle side skirt | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [V2.4 Skirt Buttons](xbst_/V2.4_Skirt_Buttons) | Skirt mod for custom Gcode macro buttons | V2.4 | 2023-08-23 23:08:13 +0000 |
-|  | [ZipClip V0](xbst_/ZipClip_v0) | Very simple ziptie mount for v0 1515 extrusions | V0.2 | 2023-08-23 23:08:13 +0000 |
-| xceled | [Single Panel Magnet Mount](xceled/Single_Panel_Magnet_Mount) | Mount your front panel using only magnets | V2.4 | 2023-08-23 23:08:13 +0000 |
-| yenda | [SW More Robust XZ Belt Paths](yenda/vsw_more_robust_belt_paths) | Small mods to belt routing components to ensure a better/more... | VSW | 2023-08-23 23:08:13 +0000 |
-| yeri | [V0 Magnetic Panels](yeri/V0_Magnetic_Panels) | Mount V0 panels with magnets, removes need for hinges and lets you... | V0.2 | 2023-08-23 23:08:13 +0000 |
-|  | [V1 3Z](yeri/V1_3Z) | 3Z mod for V1 | V1.8 | 2023-08-23 23:08:13 +0000 |
-| zruncho | [V0 No-Drop Nuts](zruncho/V0_No_Drop_Nuts) | Voron0 nut inserts which auto-align (LDO frames only) | V0.2 | 2023-08-23 23:08:13 +0000 |
+| 1-0-R | [V2.4 handle](1-0-R/handle) | Handle for Voron 2.4 | V2.4 | 2023-08-23 23:21:56 +0000 |
+| 120decibell | [Side entry exhaust housing](120decibell/exhaust_housing_side_entry) | Exhaust housing with dual cover screws and single or dual side... | V1.8, V2.4, VT | 2023-08-23 23:21:56 +0000 |
+|  | [Huvud Chain Mount](120decibell/huvud_chain_mount) | Huvud rear mount for Clockwork or LGX that supports a cable chain. | V1.8, VT | 2023-08-23 23:21:56 +0000 |
+| 3dpandme | [FANnypack zero](3dpandme/Fannypack_zero) | Electronics cooling solution for Voron Zero | V0.2, VSW, VT | 2023-08-23 23:21:56 +0000 |
+|  | [Thermistor holder zero](3dpandme/Thermistor_holder_zero) | Extended thermistor holder for Voron Zero | V0.2, VSW, VT | 2023-08-23 23:21:56 +0000 |
+| 3vilson | [V0.1_Skirt_Holes](3vilson/V0.1_Skirt_Holes) | Skirt with Access Holes from the bottom | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [V0.1_Skirt_Inlet](3vilson/V0.1_Skirt_Inlet) | Skirt with C14 inlet + New feet to screw into | V0.2 | 2023-08-23 23:21:56 +0000 |
+| 42bios | [LED mount](42bios/LED_mount) | AngryLED - LED-mount for Lumentech LT3 profiles. | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Corner panel clip w. cable](42bios/corner_panel_clip_cable) | Corner panel clip with an internal cable path. | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Exhaust filter housing - side...](42bios/exhaust_filter_housing_side) | Exhaust filter housing with the G1-8 "thread on the side. | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [relay mount](42bios/relay_mount) | relay-mount for 2x 2 channel relay modules. | V2.4 | 2023-08-23 23:21:56 +0000 |
+| Akio | [Hidden cable routing z belt cover](Akio/cable_routing_z_belt_cover) | Z belt covers that allow hidden cable routing. | V2.4 | 2023-08-23 23:21:56 +0000 |
+| AlexanderT-Moss | [270 Clamping Hinges](AlexanderT-Moss/270-Clamping-Hinges) | Simple 270 degree hinges that clamp to the front panels instead of... | V2.4 | 2023-08-23 23:21:56 +0000 |
+| Andre | [Mini Afterburner ADXL345 Mount](Andre/Mini_Afterburner_ADXL345_Mount) | Mount for an AXDL345 on the Mini Afterburner | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Mini Afterburner Strain Relief](Andre/Mini_Afterburner_Strain_Relief) | A replacement strain relief for the Mini Afterburner toolhead | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Revo Nozzle Skirt](Andre/Revo_Nozzle_Skirt_Trident) | A Revo nozzle box hidden in a Trident skirt. | VT | 2023-08-23 23:21:56 +0000 |
+|  | [V0 Neopixel Front Bed Mount](Andre/V0_Neopixel_Front_Bed_Mount) | A replacement Front Bed Mount with room for a neopixel or dotstar... | V0.2 | 2023-08-23 23:21:56 +0000 |
+| Backenfutter | [Mount for Electreeks Camera](Backenfutter/Mount_for_Electreeks_Camera) | This Mod is a simple "One Piece" mount for the popular Electreeks... | V2.4 | 2023-08-23 23:21:56 +0000 |
+| Badnoob | [AB-BN Afterburner mod (5015)](Badnoob/AB-BN) | Improved Afterburner with 5015 fan | V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+|  | [AB-BN for Stock Afterburner (4020)](Badnoob/ABBN_for_Stock) | Improved Dragon and Rapido toolhead for stock Afterburner with 4020... | V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+|  | [Precision AB Drive](Badnoob/Precision_AB_Drive) | Changes the gearing for the AB drives to improve both resolution... | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Rail Alignment](Badnoob/Rail_Alignment) | Tools and procedure to properly align the rails in 2.4 and Afterburner | V2.4 | 2023-08-23 23:21:56 +0000 |
+| Baltojikale | [LoudOwl aka Stabby](Baltojikale/LoudOwl_aka_Stabby) | Alternative dual 5015 part cooling fan toolhead for Afterburner | V1.8, V2.4, VSW | 2023-08-23 23:21:56 +0000 |
+| BladeScraper-Designs | [CornerPanel_SpoolHolder](BladeScraper-Designs/CornerPanel_SpoolHolder) | A better supported Spool Holder that mounts to a modified corner... | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Horizontal Spool Holder](BladeScraper-Designs/Horizontal-Spool-Holder) | Based on the stock holder but mounts to the horizontal extrusions. | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Microswitch Pod With Connector](BladeScraper-Designs/Microswitch_Pod_With_Conector) | Microswitch pod with JST-XH 4-pin connector | V2.4 | 2023-08-23 23:21:56 +0000 |
+| Blamm | [LRS-100 DIN mount](Blamm/lrs-100) | DIN rail mount for an extra LRS-100 Power Supply | V1.8, V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| BlueBear | [Bowden Fence](BlueBear/Bowden_Fence) | A little "fence" to hold the tubes away from the belts. | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Deck Panel Backpack](BlueBear/Deck_Panel_Backpack) | A mounting alternative if you don't want to drill your deck panel | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Clippable Wago 221 Mounts](BlueBear/Wago_221_mount) | Mounts for Wago 221 to screw or clip-in on 1515 extrusions | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Ziptie Mount](BlueBear/Ziptie_Mount) | Clippable Ziptie hooks for 1515 extrusions | V0.2 | 2023-08-23 23:21:56 +0000 |
+| Boingomw | [Wago mount](Boingomw/Wago_mount) | Smaller 5 port Wago mount that fits parallel to the support rails | V2.4 | 2023-08-23 23:21:56 +0000 |
+| Bondtech | [Mini-After-LGX-Lite](Bondtech/Mini-After-LGX-Lite) | LGX Lite Toolhead Setup For Voron V0.1. | V0.2 | 2023-08-23 23:21:56 +0000 |
+| ByteChild | [2-Channel Relay DIN Rail Bracket](ByteChild/2_Channel_Relay_DIN_Rail_Bracket) | DIN Rail mounting bracket for an 2-Channel-Relay | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [ESP32 DIN Rail Bracket](ByteChild/ESP32_DIN_Rail_Bracket) | DIN rail mounting bracket for an ESP32 | V2.4 | 2023-08-23 23:21:56 +0000 |
+| CannedBass | [PITFT50 45-degree mount](CannedBass/PITFT50_45_degree_mount) | Mount that puts the screen at a 45-degree angle for more vertical... | V2.4, VT | 2023-08-23 23:21:56 +0000 |
+|  | [Trident Bed Fans](CannedBass/Trident_Bed_Fans) | Bed fans for Trident | VT | 2023-08-23 23:21:56 +0000 |
+| Ch4rlesB | [V0 Handles Slim](Ch4rlesB/V0_Handles_Slim) | Simple and slim handles for the V0 | V0.2 | 2023-08-23 23:21:56 +0000 |
+| Chaoticlab | [Tool_free_tensioner](Chaoticlab/Tool_free_tensioner) | Tool-free tensioner for Z-Axis | V2.4 | 2023-08-23 23:21:56 +0000 |
+| ChenTheDesignMaker | [Z Belt Clip](ChenTheDesignMaker/Z_Belt_Clip) | Simple clip to keep extra Z belts clean and away from panels | V2.4 | 2023-08-23 23:21:56 +0000 |
+| D4rkCelerity | [Raspberry Pi Zero Bracket](D4rkCelerity/Raspberry_Pi_Zero_Bracket) | Modified version of Trident RPi bracket to fit the smaller RPi Zero | V0.2, V1.8, V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| DC67 | [Plug Panel Mod for Schaffner...](DC67/plug_panel_schaffner) | A modified plug panel for the Power Entry Connector Schaffner... | V2.4 | 2023-08-23 23:21:56 +0000 |
+| DaGlo | [V0.1 Duet 2 Wifi mounting brackets](DaGlo/Voron_V0_Duet_2_WiFi_Mounting_Brackets) | Voron 0.1 Mounting brackets with/without RPi 4 | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Voron V0 Mean Well power supply...](DaGlo/Voron_V0_MW_PS_Bracket) | Voron V0 Mean Well power supply bracket (Funssor Kit) | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Voron V0 SSR Mount](DaGlo/Voron_V0_SSR_Mount) | Voron V0 SSR Mount for the bottom | V0.2 | 2023-08-23 23:21:56 +0000 |
+| DaGrooch13 | [Tophat Exhaust Filter V0](DaGrooch13/Tophat_Exhaust_Filter) | Activated charcoal exhaust filter with HEPA that replaces the rear... | V0.2 | 2023-08-23 23:21:56 +0000 |
+| DaStivi | [The Cephalopod limb (BTT Octopus...](DaStivi/the_Cephalopods_limb) | An alternative Din rail mount for BTT Octopus (PRO) boards | V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+| Dan88 | [V0 one-part Skirts](Dan88/V0skirt) | One part Skirts for the V0 | V0.2 | 2023-08-23 23:21:56 +0000 |
+| Daten | [Revo hotend skirt case](Daten/Voron_2.4_Revo_Nozzle_Holder) | A skirt case for the Revo hotends to reside R1 and R2 | V2.4 | 2023-08-23 23:21:56 +0000 |
+| DerekBackus | [LED Strip Holder](DerekBackus/LED_Holder) | Simple bracket to mount an LED strip |  | 2023-08-23 23:21:56 +0000 |
+|  | [Trident Right Skirt Switch](DerekBackus/Right_Skirt_Switch) | Moves power switch to right front skirt on the Trident |  | 2023-08-23 23:21:56 +0000 |
+| Derpimus | [V0.1 Block Handle](Derpimus/Block_handle_v0.1) | V0.1 Block Style Handle | V0.2 | 2023-08-23 23:21:56 +0000 |
+| DorjeDorf | [Duet 3 3HC Din Bracket](DorjeDorf/Duet_3_3HC_Din_Bracket) | V2.4 Duet 3 3HC Din Bracket | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Duet 3 6HC Din Bracket](DorjeDorf/Duet_3_6HC_Din_Bracket) | V2.4 Duet 3 6HC Din Bracket | V2.4 | 2023-08-23 23:21:56 +0000 |
+| Dr-Info | [V2.4 Rear Skirt Mod for Z-Drive...](Dr-Info/V2.4r2_Z-Drive_Motor_Tensioner_Mod_Rear_Skirts) | This mod enables the you to utilize the rear skirts, power and... | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Corner Cable Cover with Drop Holes](Dr-Info/corner_cable_cover_with_drop_down_holes) | Corner cable cover around Z-idler with drop holes near z frame and... | V2.4 | 2023-08-23 23:21:56 +0000 |
+| DrGhetto | [Ghetto Panels](DrGhetto/GhettoPanels) | Printed panels for the Voron Zero | V0.2 | 2023-08-23 23:21:56 +0000 |
+| ElPoPo | [Removable Doors](ElPoPo/RemovableDoors) | New hinge to easily remove the door and have a wide opening V2.x | V2.4 | 2023-08-23 23:21:56 +0000 |
+| Electroleon | [U2C Mounting](Electroleon/U2C_Mounting) | Bigtreetech U2C CAN Interface mounting bracket | V0.2, V1.8, V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| Ellis | [15x15 Drag Chain End](Ellis/15x15_Drag_Chain_End) | 15x15 drag chain end piece | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Badge Retractor Mount](Ellis/Badge_Retractor_Mount) | Extrusion mount for badge retractor to keep bowden tube out of the... | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Bed Fans](Ellis/Bed_Fans) | Bed fan control macros and 5015 bed fan mounts | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Short Z Joints](Ellis/Short_Z_Joints) | Shorter Z joints for the v2.4 | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Single MGN9H Carriage](Ellis/Single_MGN9H_Carriage) | Single MGN9H toolhead carriage with toolhead x endstop support (for... | V1.8, V2.4 | 2023-08-23 23:21:56 +0000 |
+| Empusas | [Mounts for BTT Filament Motion...](Empusas/BTT_Filament_Motion_Sensor_Mount) | Mounts for Big Tree Tech Smart Filament Motion Sensor | V0.2, V1.8, V2.4, VSW | 2023-08-23 23:21:56 +0000 |
+|  | [Power Skirt 2.x FN284-10-06](Empusas/PowerSkirt_FN284-10-06) | Power Skirt for Schaffner FN284-10-06 V2.x | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Mounts for Terminal Blocks NC933...](Empusas/Terminal_Blocks_NC933_SPL-62) | Mounts for Terminal Blocks NC933 and SPL-62 from AliExpress | V2.4 | 2023-08-23 23:21:56 +0000 |
+| Fiction | [C270 mount](Fiction/C270_mount) | Logitech C270 webcam front-centre mount | V2.4, VT | 2023-08-23 23:21:56 +0000 |
+|  | [Crossrail](Fiction/Crossrail) | Across-the-rails LRS-200-24 or RSP-200-24 mount using DRP-03 brackets | V2.4, VT | 2023-08-23 23:21:56 +0000 |
+|  | [Exhaust_cover](Fiction/Exhaust_cover) | Cover for exhaust cutout in back panel | V2.4, VT | 2023-08-23 23:21:56 +0000 |
+|  | [Exhaust_cover_SFS](Fiction/Exhaust_cover_SFS) | Exhaust cover and BTT Smart Filament Sensor mount | V2.4, VT | 2023-08-23 23:21:56 +0000 |
+|  | [LGX Lite toolhead PCB mount](Fiction/LGX_Lite_toolhead_PCB_mount) | Mount for Hartk's toolhead PCB(s) for LGX Lite | V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+| FreeformFez | [V1.8 Filtered Power Inlet](FreeformFez/FilteredPower) | V1.6 Filtered Inlet and Rocker Switch for V1.8 | V1.8 | 2023-08-23 23:21:56 +0000 |
+| GSL12 | [Pocketwatch Nema 17](GSL12/pocketwatch_nema17) | Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe... |  | 2023-08-23 23:21:56 +0000 |
+| GadgetAngel | [Bed Support Extrusions Alignment...](GadgetAngel/Bed_Support_Alignment_Tools) | The bed support alignment tools will assist in helping align the... | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Cricut Voron Logos](GadgetAngel/Cricut_Voron_Logos) | For any cutting machines or machines that rely on vector graphics... | V0.2, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+| Galvanic | [Bowden Tube Guide](Galvanic/Bowden_Tube_Guide) | Bowden tube guide and CANBUS wire support | V1.8, V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| GiulianoM | [Fly F407ZG Mount](GiulianoM/FlyF407ZG) | Mount for the Fly F407ZG: https://github.com/FLYmaker/FLYF407ZG | V2.4 | 2023-08-23 23:21:56 +0000 |
+| Gizzle | [Ender 3 and Ender 3 Pro...](Gizzle/ender-3_pro_switchwire) | Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics... | VSW | 2023-08-23 23:21:56 +0000 |
+| Hobson318 | [Belt Tension Wrench](Hobson318/Belt_Tension_Wrench) | Wrench for easier turning of the belt tension knobs on V0.1 | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Klipper Expander Mount](Hobson318/Klipper_Expander_Mount) | Mounting brackets for the klipper expander using vhb tape or... | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+| Iakabos | [c920 Mount](Iakabos/C920_mount) | Slim mount for logitech c920 webcam | V1.8, V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [V0 beltchains](Iakabos/V0_beltchain) | Modified beltchain parts for V0 Z cables | V0.2 | 2023-08-23 23:21:56 +0000 |
+| JD | [V2.4 Filament runout sensor](JD/RefillPlease) | Replace the 2.4 stock bowden tube holder and add a filament runout... | V1.8, V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| JJFX | [V2.4 CR Touch Snap Mount](JJFX/CRTouch_Snap_Mount) | Mount to replace v2.4 (MGN9) probe with a Creality CR Touch | V2.4 | 2023-08-23 23:21:56 +0000 |
+| JNP | [Back Door](JNP/Back-Door) | Door for easy hardware access | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Deck Panel](JNP/Deck_Panel_Rear) | Covers the hotbed cables | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Drawer](JNP/Drawer) | Drawer in four different versions | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Front Door](JNP/Front-Door) | Door in a frame | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Hepa Filter](JNP/HEPA-Filter) | Filter case with fan´s | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Mid Panel](JNP/Mid-Panel) | Panel for SKR1.4/1.4 or SKR E3 mini mount | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Neopixel Case](JNP/Neopixel-Y_Rails) | mounting for Neopixel strip with 8 LED´s | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Side Panels](JNP/Side-Panels) | Panels with intergrated hinge | V0.2 | 2023-08-23 23:21:56 +0000 |
+| Jasrags | [Feed slot with filament pass-...](Jasrags/sw_fee_slot_filament_passthrough) | A feed slot with a filament pass-through | VSW | 2023-08-23 23:21:56 +0000 |
+| JeremyRuhland | [V2.4 Plug Panel Generic Combo](JeremyRuhland/V2.4_Plug_Panel_Generic_Combo) | Skirt power panel for generic amazon plug/switch/fuse combo module,... | V2.4 | 2023-08-23 23:21:56 +0000 |
+| Jon | [1515 LED Mount](Jon/1515_led_mount) | Snap in 1515 Led mount for WS2812B | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Z Cover for v0.1](Jon/V0.1_Z_Cover) | A cover to stop things from dropping down the Z motor and... | V0.1 | 2023-08-23 23:21:56 +0000 |
+|  | [adxl345 skirt keystone](Jon/adxl345_skirt_keystone) | Skirt keystone for ADXL345 using Microfit 3.0 | V2.4 | 2023-08-23 23:21:56 +0000 |
+| JosAr | [Klicky Probe](JosAr/Klicky-Probe) | Microswitch based inductive probe replacement | V0.2, V1.8, V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| KenadyDwag44 | [Switchwire Lightbar](KenadyDwag44/sw_lightbar) | A LED lightbar for switchwire | VSW | 2023-08-23 23:21:56 +0000 |
+| KevinAkaSam | [VEFACH](KevinAkaSam/VEFACH) | Voron Exhaust Filter Inserts for Activated Coal + Hepa | V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| KiloQubit | [V0 Reverse Bowden Mount](KiloQubit/V0_reverse_bowden_mount) | V0 reverse bowden mount | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [V2.4 Z Chain Mounts for 3 Hole...](KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts) | Z chain mounts for 3 hole generic chain | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Trident Schurter Inlet Skirt](KiloQubit/trident_schurter_power_inlet) | Trident inlet skirt for mounting a Schurter DD11.0124 or similar inlet | VT | 2023-08-23 23:21:56 +0000 |
+| Koios | [6mm Tempered Glass Mod](Koios/6mm_Glass) | Lock levers and rests for 6mm Tempered glass panels | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [C920 Low Profile Mount](Koios/C920_Mount) | Low profile mount for a C920 Webcam | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [LED Bar Mounts](Koios/LED_Mounts) | Low profile mount for led bar lights | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [V0 C920 Tophat Mount](Koios/V0_C920_Tophat_Mount) | Mounting bracket for a Logitech C920 on the tophat | V0.2 | 2023-08-23 23:21:56 +0000 |
+| Kosh42EFG | [Kirigami bed front](Kosh42EFG/kirigami_bed_front) | Printed bed front for kirigami folded metal bed mount with Voron logo. | V0.2 | 2023-08-23 23:21:56 +0000 |
+| Kruppes | [Encosed Bottom](Kruppes/Closed_Bottom) | Modified printed parts and panel to fully enclose V0. | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [V0 Printed Deck with inserts](Kruppes/Deck_Panel_inserts_logo) | Electronics Deck Panel using brass heat inserts. Optional with... | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Belt Tension Meter](Kruppes/Tension_Meter) | Print in place tension meter to easily tighten multiple belts to... | V0.2, V1.8, V2.4, VSW | 2023-08-23 23:21:56 +0000 |
+| Kyleisah | [CableGator Cable Comb](Kyleisah/CableGator) | A cable comb for simplifying and tidying wire harnesses for... | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+| LJ | [Scrubby](LJ/Scrubby) | Easy to use filament dust filter | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+| Le0n | [Magnetic panels with Magnet Inserts](Le0n/Magnetic_Panels_with_Magnet_Inserts) | Magnetic panel mounts with magnets inserted into frame slots. | V1.8, V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| LoCoCNC | [3mm Top Hat Panels Clips](LoCoCNC/3mm_tophat_panel_parts) | Required to use the 3mm (1/8") thick top hat panels for V0.1 | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [MGN7H Shims](LoCoCNC/MGN7H_Shims) | Shims for making bearing cartridges coplanar | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Mosquito PTFE 15mm Tube Cutting Jig](LoCoCNC/Mosquito_PTFE_Cutting_Jig) | Tool to precicely cut 15mm PTFE Tube | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Strain Relief w/ 10 Pin Microfit](LoCoCNC/Strain_Relief_w_Microfit) | Strain Relief with 10 pin Microfit connector | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [SSR Mounting Strap](LoCoCNC/ssr_strap) | Mounting Strap for SSR on 1515 Extrusions | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [V2.4 Bed Wiring Grommet](LoCoCNC/wire_grommets) | Safely capture your bed wires thru the bottom panel | V2.4 | 2023-08-23 23:21:56 +0000 |
+| LoganFraser | [ComboInlet](LoganFraser/ComboInlet) | Skirt pieces for Trident, 2.4 and 2.4r2 for combo inlets in 2 sizes. | V2.4, VT | 2023-08-23 23:21:56 +0000 |
+|  | [HorseshoeSpoolHolder](LoganFraser/HorseshoeSpoolHolder) | Horseshoe Spool Holder - mounts internally for Trident, or... | V0.2, V1.8, V2.4, VT | 2023-08-23 23:21:56 +0000 |
+|  | [PiPlate](LoganFraser/PiPlate) | PiPlate - Raspberry Pi3,4 mounting plate and Skirt Mod for... | V2.4, VT | 2023-08-23 23:21:56 +0000 |
+|  | [Trident Inverted Electronics](LoganFraser/TridentInvertedElectronics) | Flip the Trident electronics bay for top access. | VT | 2023-08-23 23:21:56 +0000 |
+|  | [WagoMounts](LoganFraser/WagoMounts) | Wago Mounts for Din Rail or 2020 Extrusion mounting. | V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+| Long | [Mantis Dual 5015 Toolhead](Long/Mantis_Dual_5015) | MGN12 Dual 5015 Toolhead for 2.4 & 1.8 | V1.8, V2.4 | 2023-08-23 23:21:56 +0000 |
+| Lukas | [SSD1306 Case Front Cover](Lukas/SSD1306_Case_Front_Cover) | SSD1306 Mount replacement for Mini12864 | V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| MCMBen | [Voron0 Block & Tackle Z Belt](MCMBen/Voron0_Block_and_Tackle_Z_Belt) | A block & tackle belted Z solution using NEMA14. Ratios from 5:1 to... | V0.2 | 2023-08-23 23:21:56 +0000 |
+| MSA | [Belt tension helper](MSA/V0-Belt-tension-helper) | Belt tension helper for V0.1 | V0.2 | 2023-08-23 23:21:56 +0000 |
+| MSiemons | [Tophat Hinge V0](MSiemons/TophatHingeV0.1) | Simple hinge for V0 Tophat | V0.2 | 2023-08-23 23:21:56 +0000 |
+| Mac10goesBRRRT | [PiTFT Mount](Mac10goesBRRRT/BTT_PiTFT) | Mount for the BTT PiTFT Touchscreen | V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| Majarspeed | [Hartk board mount galileo](Majarspeed/Hartk_Mount_Galileo) | It hangs stuff on your tool | V2.4 | 2023-08-23 23:21:56 +0000 |
+| MakeALeft | [Switchwire Clean Center Grill](MakeALeft/Switchwire_Front_Grill) | Removed magnet holders on center panel for cleaner look |  | 2023-08-23 23:21:56 +0000 |
+| MasturMynd | [Stealth Zero](MasturMynd/Stealth_Zero) | A low poly gantry with front tensioners and optional front mounted... | V0.2 | 2023-08-23 23:21:56 +0000 |
+| MathematicalPotato | [V0.1 Belted Z Drive](MathematicalPotato/v0.1_belted_z_drive) | Conversion to a belted Z axis for the V0.1 adapted from... | V0.2 | 2023-08-23 23:21:56 +0000 |
+| Maverick | [MiniSB_LGXL](Maverick/MiniSB_LGX_Lite) | A Bondtech LGX Lite variant of the MiniSB | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+|  | [MiniSB_Rapido](Maverick/MiniSB_Rapido) | Modified MiniSB to use a Rapido hotend | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+|  | [MiniSB_Sharkfin](Maverick/MiniSB_Sharkfin) | Modified MiniSB to use a Sharkfin Extruder | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+|  | [V0.2 Handles](Maverick/V0.2_Handles) | Add handles to the extrusion tophat | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [V0.2 Stealth Skirts](Maverick/V0.2_Stealth_Skirts) | Juiced up skirts for the V0.2 | V0.2 | 2023-08-23 23:21:56 +0000 |
+| Mckurt | [Switchwire Y Belt Tensioner](Mckurt/Switchwire_Y_Belt_Tensioner) | Switchwie Y axis Belt Tensioner | VSW | 2023-08-23 23:21:56 +0000 |
+| Mellow | [V0 Fly-Gemini](Mellow/V0_Fly-Gemini) | Fly-Gemini adapted model for V0 | V0.2 | 2023-08-23 23:21:56 +0000 |
+| MikesMods | [LGX mount for V0.1 with 2nd X rail](MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail) | V0.1 mod for mounting Bondtech LGX extruder with addition of 2nd X... | V0.2 | 2023-08-23 23:21:56 +0000 |
+| Minsekt | [Rear Umbilical](Minsekt/Rear_Umbilical) | Rear Umbilical mounting solution including a relocated Y-Endstop | V2.4 | 2023-08-23 23:21:56 +0000 |
+| MrBean66 | [SKR Pro DIN Mount](MrBean66/SKR_PRO_Mount) | Simple mod to mount the SKR Pro board from BTT to a DIN rails. | V1.8, V2.4 | 2023-08-23 23:21:56 +0000 |
+| MrDespair | [MiniAB Pinda Probe Mount](MrDespair/MiniAB_Pinda) | Replacement MiniAB Cowling to add a mount for a Pinda style probe. | V0.2 | 2023-08-23 23:21:56 +0000 |
+| Mrgl-Mrgl | [LGX Lite Mount](Mrgl-Mrgl/LGX_Lite_Mount) | a mount for the LGX Lite | V1.8, V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| Nashuar | [V0 Dragon Toolhead M2.5x8](Nashuar/V0_Dragon_ToolheadStockScrews) | This toolhead uses the stock M2.5 screw that came with the dragon... | V0.2 | 2023-08-23 23:21:56 +0000 |
+| Nomsplease | [60mm Shaft Jig](Nomsplease/60mm_Shaft_Jig) | Simple jig for cutting and grinding 60mm Z shafts | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Duet Wifi Mount](Nomsplease/V0_Mods/duet_wifi_mount) | Duet wifi mount in pocketwatch location | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [LED Mounts](Nomsplease/V0_Mods/led_mounts) | Basic LED mounts for 10 and 12mm strips | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Remixed Panel Mounts](Nomsplease/V0_Mods/panel_mounts) | Remixed rear bottom panel mounts with stop | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Pi Cam/ZeroW Mount](Nomsplease/V0_Mods/pi_zero_camera_mount) | Mount for pi camera and ZeroW | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Pocket Watch Rear Reolcation...](Nomsplease/V0_Mods/pocket_watch_rear_relocation) | Pocket watch rear reolcation bracket | V0.2 | 2023-08-23 23:21:56 +0000 |
+| Oakman | [BTT 24V UPS Metal DIN Mount](Oakman/BTT_24V_UPS_Metal_DIN_Mount) | Adapter to use a metal DIN mount for the BTT 24V UPS | V1.8, V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [FYSETC Spider Metal DIN Mount](Oakman/FYSETC_Spider_Metal_DIN_Mount) | Use a metal DIN mount for your FYSETC Spider | V1.8, V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [RPI Metal DIN Mount](Oakman/RPI_Metal_DIN_Mount) | Adapter for metal DIN mounting the Raspberry Pi | V1.8, V2.4 | 2023-08-23 23:21:56 +0000 |
+| OboMaker3D | [C17-EXT Filter HEPA Carbon](OboMaker3D/C17-EXT) | Replaces standard filter with new HEPA Crabon and 120mm fan V1.1 | V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+|  | [C17-EXT-CARTRIDGE for C17-EXT...](OboMaker3D/C17-EXT-CARTRIDGE) | Alternative to a commercial cartridge for the C17-EXT filter | V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+| Phalanx | ["Other" Idlers Mod](Phalanx/Other-V2-Idlers) | Allow usage of wider toolheads on the V2 | V2.4 | 2023-08-23 23:21:56 +0000 |
+| Polar-Ted | [V0.1 Z nozzle endstop switch](Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch) | Sexbolt style switch for V0 | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [V0.1 Two Piece Back Panel](Polar-Ted/V0_Two_Piece_Back_Panel) | Vented 2 piece back panel for V0 | V0.2 | 2023-08-23 23:21:56 +0000 |
+| Polared | [Power Inlet with Keystone Insert](Polared/Power_Inlet_w_Keystone_Insert) | Voron 0.1 Power inlet with keystone insert slot | V0.2 | 2023-08-23 23:21:56 +0000 |
+| Printopal | [Magnetic top panel](Printopal/Magnetic_top_panel) | Top panel with magnets allows for quick installation and removal | V1.8, V2.4 | 2023-08-23 23:21:56 +0000 |
+| PsychoShaft | [C92X_PsycHoShafts_Mount](PsychoShaft/C92X_PsycHoShafts_Mount) | 2020 Top profile 920 camera mount / 2 point axis pivot | V1.8, V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| QuackProfit | [V0 Adafruit NeoPixel LED Mounts](QuackProfit/V0-Adafruit-Y_Rails) | Mount Adafruit PCB NeoPixel Sticks on the V0 Y-rail extrusions | V0.2 | 2023-08-23 23:21:56 +0000 |
+| Rhastlyn | [60mm Fan Cover](Rhastlyn/60mmFanCover) | A easy to install cover for spec 60mm fans originally designed for... | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Wansview 1080p Camera Mount](Rhastlyn/WansviewCameraMount) | A camera mount that replaces the OEM part to allow the camera to be... | V2.4 | 2023-08-23 23:21:56 +0000 |
+| RockNLol | [RockNRoll](RockNLol/RockNRoll) | Rockers to roll the printer on its back for easier access to the... | V2.4 | 2023-08-23 23:21:56 +0000 |
+| ScramblerUSA | [Side Skirt Power Switch](ScramblerUSA/SideSkirtPowerSwitch) | Skirt-mounted rocker switch for easy access for Voron 2.4 | V2.4 | 2023-08-23 23:21:56 +0000 |
+| See1807 | [TopHat Exhaust and LED Light](See1807/Voron_V0_Exhaust_and_LED_Mod) | A mount for 10mm LED strips and Exhaust for Voron V0 | V0.2 | 2023-08-23 23:21:56 +0000 |
+| Shiftingtech | [Trident Dual Power Switch](Shiftingtech/Trident_dual_power_switch) | A replacement skirt, allowing 2 power switches | VT | 2023-08-23 23:21:56 +0000 |
+| ShinyPants | [OrangePi 3 LTS DIN Rail bracket](ShinyPants/Orange_Pi_3_LTS_DIN) | A DIN rail mount for OrangePi LTS 3 | V1.8, V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| Shteeeeeve | [V0.1 LED Tophat](Shteeeeeve/V01-LED-Tophat) | V0.1 LED Tophat w/ 24V LED Lightstrip | V0.2 | 2023-08-23 23:21:56 +0000 |
+| Slidr | [PanzerBalls 2.4](Slidr/PanzerBalls2.4) | Squash Ball Feet for V2.4 | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [PanzerChain 2.4](Slidr/PanzerChain2.4) | Energychain for V2.4 | V2.4 | 2023-08-23 23:21:56 +0000 |
+| Spaghetti-Bolognese | [LCD Case Mod](Spaghetti-Bolognese/LCD_case_mod) | Improvements to the V2.4 mini12864 LCD case inc E-stop button cover | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Simplified Z Drive Motor Mount](Spaghetti-Bolognese/Z_drive_motor_mount) | Z drive motor mount bracket mod to improve pulley to belt alignment | V2.4 | 2023-08-23 23:21:56 +0000 |
+| StvPtrsn | [Skirts for a 320mm Build](StvPtrsn/320mm_Build) | Skirts for a 320mm build | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Keystone Jack for Filtered Mains...](StvPtrsn/Keystone_Jack_Filtered_Mains_Panel) | Add a keystone jack to your filtered mains plug panel | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Parts_Jigs and Mods](StvPtrsn/Parts_Jigs_and_Mods) | Parts, Jigs and modifications I use for my builds | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+|  | [Side Fan Support, No Tape](StvPtrsn/Side_Fan_Support_No_Tape) | Mount the 60mm side fans and inserts without tape | V2.4 | 2023-08-23 23:21:56 +0000 |
+| Takuya | [WANSVIEW USB Camera Mount](Takuya/USBCameraMount) | WANSVIEW 1080p Camera Mount for Voron 2.4 | V2.4 | 2023-08-23 23:21:56 +0000 |
+| TheSquiffy | [V0 Belts holder](TheSquiffy/V0_Belts_holder) | V0 Belts Holder | V0.2 | 2023-08-23 23:21:56 +0000 |
+| TiagoBarata | [Logitech C270 Mount](TiagoBarata/Logitech_C270_Mount) | Logitech C270 Top Center Mount | V2.4 | 2023-08-23 23:21:56 +0000 |
+| Tircown | [DIN mount RS-15-5 PSU](Tircown/DIN_mount_RS-15-5) | A DIN mount for the RS-15-5 | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Display mount 5"](Tircown/Display_mount_5inch) | Tiltable mount for a 5" tactile display | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Raspberry in plug panel](Tircown/Raspberry_plug_panel) | Raspberry mount vertically in the plug panel, allow easy access to... | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [V0.1 Skirt buttons](Tircown/V01_skirt_buttons) | Buttons for V0.1 spec skirts | V0.2 | 2023-08-23 23:21:56 +0000 |
+| Triano | [Ender 3 Pro or V2 to Switchwire Mod](Triano/Ender_3Pro_Switchwire) | Convesion of an Ender 3 Pro or V2 to a Switchwire | VSW | 2023-08-23 23:21:56 +0000 |
+| Ultrawaffles | [Ender 3 to SW conversion](Ultrawaffles/Ender_3_to_SW) | A conversion mod for the ender 3 to switchwire. Designed to allow... | VSW | 2023-08-23 23:21:56 +0000 |
+| VinnyCordeiro | [RGB LED grid for Stealthburner](VinnyCordeiro/RGB_LED_grid_for_SB) | A small RGB LED grid for Stealthburner's logo | V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+| Weaslus | [Electronics Bay and Enclosure...](Weaslus/Electronics-Bay-Seperator) | Better enclose chamber and keep heat from electronics | V0.2 | 2023-08-23 23:21:56 +0000 |
+| ZZP8202 | [Pull-out electrical store](ZZP8202/Pull-out_electrical_store) | Voron 2.4 Pull-out electrical store（350mm only） | V2.4 | 2023-08-23 23:21:56 +0000 |
+| Zen3D | [V0 1515 T-nut](Zen3D/V0_1515_T-nut) | M3 square and hex nuts for Voron0 1515 frame | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [V0 Handle](Zen3D/V0_Handle) | Voron0 Handle for 3mm panels | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [V0 MidPanel HexPattern](Zen3D/V0_MidPanel_HexPattern) | Voron0 MidPanel with Hex pattern and Wire cover | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [V0 Skirt set](Zen3D/V0_Skirt) | SSR, PowerSwitch, Adxl, Nameplate and color change printing | V0.2 | 2023-08-23 23:21:56 +0000 |
+| aTinyShellScript | [RS PSU DIN Bracket](aTinyShellScript/RS_PSU_DIN_Brackets) | DIN brackets for MeanWell RS PSUs with 80mm spacing. | V2.4 | 2023-08-23 23:21:56 +0000 |
+| ademuri | [Lights, Camera, Voron](ademuri/Lights_Camera_Voron) | A mount for LED strips and Picam for the V0.1 | V0.2 | 2023-08-23 23:21:56 +0000 |
+| aeresov | [MeanWell UHP-xxx DIN mount](aeresov/MeanWell_UHP_DIN_mount) | A bracket for MeanWell UHP series PSU (200, 350 and 500) to mount... | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Raspberry Pi DIN mount](aeresov/Raspberry_Pi_DIN_mount) | A bracket for Raspberry Pi 3/4 to mount it onto DIN rail, along or... | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [SKR 1.3/1.4 DIN mount](aeresov/SKR_DIN_mount) | A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or... | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [TL filament sensor bracket](aeresov/TL_filament_sensor_bracket) | A bracket for TL filament sensor to mount near stock spool holder. | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [cable tie DIN mount](aeresov/cable_tie_DIN_mount) | A bracket for cable ties to route cables across DIN rails. | V2.4 | 2023-08-23 23:21:56 +0000 |
+| al3ph | [Analog Timer Mount](al3ph/analog_timer_mount) | A skirt mount for analog timer | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Filament Runout Sensor](al3ph/filament_runout) | A simple filament runout sensor | V0.2, V1.8, V2.4, VSW | 2023-08-23 23:21:56 +0000 |
+|  | [LED Mount](al3ph/led_mount) | A mount for 10mm LED WS2812 strips | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [PL05 Sensor Mount](al3ph/pl05_mount) | A mount PL05 inductive sensor | V0.2 | 2023-08-23 23:21:56 +0000 |
+| alanho | [BTT PITFT50 v2 Mount](alanho/BTT_PITFT50_v2_Mount) | A mount for the BTT PITFT50 v2 Touch Display | V2.4 | 2023-08-23 23:21:56 +0000 |
+| albert | [IKEA Dioder Led Mount](albert/IKEA_Dioder_Led_Mount) | A mount for the IKEA Dioder LED strip | V2.4 | 2023-08-23 23:21:56 +0000 |
+| antoinecellerier | [DS18B20 Sensor Mount](antoinecellerier/ds18b20-sensor-mount) | DS18B20 temperature sensor mount | V0.2 | 2023-08-23 23:21:56 +0000 |
+| ardichoke | [V0 Long Thumb Nut](ardichoke/v0-long-thumb-nut) | Taller thumb nuts for V0 bed | V0.2 | 2023-08-23 23:21:56 +0000 |
+| arkeet | [Dial test indicator mount](arkeet/dti-mount) | A toolhead mount for a dial test indicator, where the tip is... | V1.8, V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Magnetic hotend fan cover](arkeet/magnet-fan-cover) | A replacement hotend fan cover, held with magnets instead of screws. | V1.8, V2.4, VSW | 2023-08-23 23:21:56 +0000 |
+|  | [MGN12 X-axis](arkeet/mgn12) | Replaces the dual MGN9H rails with a single MGN12H. | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [V0 DC inlet](arkeet/v0-dc-inlet) | Skirt inlet for external 24V DC power supply. | V0.2 | 2023-08-23 23:21:56 +0000 |
+| baccula | [Revo Nozzle Holder for v2.4 350](baccula/revo_skirt_nozzle_holder) | A remix of Andre's design allowing for skirt storage of 4 E3D Revo... | V2.4 | 2023-08-23 23:21:56 +0000 |
+| beaugalbraith | [Nova Printhead](beaugalbraith/Nova_Printhead) | Use Nova Hotend with Afterburner | V2.4 | 2023-08-23 23:21:56 +0000 |
+| bobbleheed | [Filament Runout Sensor](bobbleheed/Filament_Runout) | Filament runout sensor that replaces the stock bowden retainer | V1.8, V2.4, VT | 2023-08-23 23:21:56 +0000 |
+|  | [Magnetic Panels](bobbleheed/Magnetic_Panels) | Magnetic clips to allow for easy removal and installation of panels | V2.4 | 2023-08-23 23:21:56 +0000 |
+| btp | [Galileo chain mount (befenybay)](btp/Galileo_Switchwire_Chain_Mount) | Modified chain mount position to cater for difference with Galileo... | VSW | 2023-08-23 23:21:56 +0000 |
+| buzzdalf | [v1.8/2.4 Afterburner connector...](buzzdalf/connector_cover) | v1.8/2.4 Connector cover for 42STH20-1004AS | V1.8, V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Ender 3 Switchwire Taller Z Mod](buzzdalf/ender_switchwire_taller_z) | Taller Z Mod | VSW | 2023-08-23 23:21:56 +0000 |
+|  | [Ender 3 Switchwire Y Tensioner Mod](buzzdalf/ytension) | Y Tension Mod | VSW | 2023-08-23 23:21:56 +0000 |
+| bythorsthunder | [MGN9 Backers Idlers](bythorsthunder/MGN9_Backers) | New idler uppers for MGN9 Extrusion backers | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Stealthburner Rapido UHF](bythorsthunder/Stealthburner_Rapido_Uhf) | Stealthburner mod for Rapido UHF | V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+| chirpy | [V0.1 Nozzle Wiper](chirpy/NozzleWiper) | Servo powered nozzle wiper and purge bucket | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Runout UnKlicky Sensor](chirpy/RunoutUnklicky) | Runout UnKlicky Sensor is a filament runout sensor with mounts for... | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+|  | [V0.1 Raised Tophat](chirpy/TipTophat) | Alternative Tophat design that uses stock panels and raises height... | V0.2 | 2023-08-23 23:21:56 +0000 |
+| chri.kai.in | [20x20mm Profile Covers](chri.kai.in/20x20mm_Profile_Covers) | Provide overlapping and flush slot covers for 20x20mm slot6... | V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+|  | [Angry CAM USB](chri.kai.in/Angry_CAM_USB) | Housing for small USB camera module, allowing mounting to gantry or... | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Exhaust Adapter 100mm](chri.kai.in/Exhaust_Adapter_100mm) | Replace 60mm exhaust fan with 100mm ventilation system adapter | V1.8, V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| chrisrgonzales | [270° Front Panel Hinge](chrisrgonzales/270_degree_hinge) | Hinges that have 270° of swivel, parametric CAD included | V2.4 | 2023-08-23 23:21:56 +0000 |
+| christophmueller | [Phaetus and Zodiac Dragonfly BMO...](christophmueller/Phaetus_Dragonfly_BMO_Afterburner) | Covers both the original Phaetus variant as well as the Zodiac one. | V1.8, V2.4, VSW | 2023-08-23 23:21:56 +0000 |
+| claytono | [Voron 2.4 Extrusion Jig](claytono/2.4-extrusion-jig) | A jig help align extrusions to get a properly square frame | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Fysetc S6 V2 Mount](claytono/fysetc-s6-v2-mount) | DIN Mount for the Fysetc S6 V2 controller | V1.8, V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [V0 Zip Tie Skirts](claytono/v0-zip-tie-skirts) | V0 skirts with small loops added along the top to allow zip tyiing... | V0.2 | 2023-08-23 23:21:56 +0000 |
+| clee | [Monster8 DIN Rail Mounts](clee/Monster8_heatsert_mount) | DIN mount for Makerbase Monster8 V1/V2 controller | V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| cmrny | [V0.1 Motor Panel Modification](cmrny/v01_motor_panel_no_rub) | V0.1 Motor panel modification to keep umbilical and bowden tube... | V0.2 | 2023-08-23 23:21:56 +0000 |
+| conqueror433 | [Voron Parts Logo](conqueror433/Voron_Parts_Logo) | Voron Parts Logo for your back panels, 3D Print or Laser Cut | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Voron V0.1 Parts Logo](conqueror433/Voron_V0.1_Parts_Logo) | Voron Parts Logo for your V0 deck panel | V0.2 | 2023-08-23 23:21:56 +0000 |
+| consibonsi | [Y-Mod SW 9mm](consibonsi/Y-Mod_SW_9mm) | 9mm Y belt mod for SW | VSW | 2023-08-23 23:21:56 +0000 |
+| csch0 | [SW Fan Mount No Tape](csch0/SW_FanMount_No_Tape) | 60x20 Fan Mount for SW without tape | VSW | 2023-08-23 23:21:56 +0000 |
+| d3nny | [Filtered Power Plug with...](d3nny/mains_plug_panel_for_RND_165-00057) | Filtered Power Plug for RND 165-00057 and CAT6-Plug | V2.4 | 2023-08-23 23:21:56 +0000 |
+| davidauvergne | [Center_cable_management_duct](davidauvergne/Center_cable_management_duct) | Mod for a centered cable management | V2.4 | 2023-08-23 23:21:56 +0000 |
+| dePrintinator | [HEPA Exhaust](dePrintinator/HEPA_Filter_Exhaust) | HEPA filter chamber exhaust replacement. | V1.8, V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| deepfriedheroin | [v0 Wago Bed Mounts](deepfriedheroin/v0_bed_wagos) | Easy to install Wago mounts for the v0 | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [v0 Power Wagos](deepfriedheroin/v0_power_wagos) | Easy to install Wago mounts for v0 mains | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [V2 Bed Wagos](deepfriedheroin/v2_bed_wagos) | Wire management for the v2 bed | V2.4 | 2023-08-23 23:21:56 +0000 |
+| doubletrouble | [V0 Skirt Mod](doubletrouble/V0_Skirt_Mod) | V0 Skirt Mod | V0.2 | 2023-08-23 23:21:56 +0000 |
+| eamars | [Stealthburner (RC1) Dragon...](eamars/stealthburner_crazy_dragon_toolhead) | The Stealthburner toolhead mount for Mellow Crazy, TriangleLab... | V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+| eddie | [LED Bar Clip](eddie/LED_Bar_Clip) | Modular LED Clip for mounting LED Strip to 2020 Extrusions | V1.8, V2.4, VT | 2023-08-23 23:21:56 +0000 |
+|  | [V1.8 12mm Z Mod](eddie/V1.8_12mm_Z_Mod) | Add V1.8 option for 12mm Z rods | V1.8 | 2023-08-23 23:21:56 +0000 |
+| edwardyeeks | [Tridentified V2.4 Power Inlet](edwardyeeks/Tridentified_V2.4_Power_Inlet) | Trident style side power inlet for V2.4 using Z Drive Motor... | V2.4 | 2023-08-23 23:21:56 +0000 |
+| elcrni | [Trident Internal Spool Holder](elcrni/Trident_Internal_Spool_Holder) | Internal spool holder for 300 and 350 Tridents. Supports full size... | VT | 2023-08-23 23:21:56 +0000 |
+|  | [V.24/Trident Spool Holder](elcrni/V2.4-Trident-Spool-Holders) | Spool holder that mounts on top for "too close to the wall" printers | V1.8, V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| evandepol | [Crydom GN Terminal Guard](evandepol/Crydom-GN-Guard) | A simple safety guard for the terminals on a Crydom GN SSR | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Voron 2.4 cable clamps](evandepol/Voron2.4-Cable-clamps) | A set of 2020-mounted cable guards to organize and dress the wiring... | V2.4 | 2023-08-23 23:21:56 +0000 |
+| falo | [LGX Lite CAN Side Mount](falo/lgx_lite_side_can) | A side mounting for a CAN board (Huvud/SHT42) to the LGX Lite | V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+|  | [Magnetic Exhaust Grill Cover](falo/magnetic_grill_cover) | A magnetic cover to seal the filtered exhaust | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Toolhead PCB to CAN Mount Adaptor](falo/toolhead_pcb_to_can) | A mount to enable side mounting of a CAN board (Huvud/SHT42) in... | V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+| filotto78 | [6mm slot cover](filotto78/6mm_slot_cover) | Simple cover for extrusion with 6mm slot width | V2.4 | 2023-08-23 23:21:56 +0000 |
+| gamebofh | [Laser cut door panels](gamebofh/door-panels) | Files to allow you to create laser cut door panels with some... | VSW | 2023-08-23 23:21:56 +0000 |
+| gauravmm | [Crazy Mozzie HF toolhead SB+CW2](gauravmm/crazy_mozzie_cw2) | Toolhead for Crazy Mozzie HF, compatible with Stealthburner and... | V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+| gen2eng | [Switchwire LED wire pass through](gen2eng/z_carriage_stop_pass_through) | Z Carriage Stop modification that makes pass through of wires for... | VSW | 2023-08-23 23:21:56 +0000 |
+| geoffreyyoung | [Dual Rail Installation Guide](geoffreyyoung/dual_rail_guide) | Rail installation guide that also works for the 2.4 dual rail... | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [LGX Info, Links, and Models](geoffreyyoung/lgx) | Useful information and models for using the Bondtech LGX extruder... | V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+| gerritwellen | [Manta M8P Mount](gerritwellen/manta-m8p-bracket) | Mounting Bracket for BTT Manta M8P | V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| golas | [V0.1 Extended tophat hinge](golas/v0-extended-tophat-hinge) | Extended tophat for v0.1 with hinges (integrated or screwed ones). | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [V0.1 Trident skirt remix with...](golas/v0-trident-skirt-mix) | Trident style v0.1 skirt mix with 12864 Mini Lcd on front or plain... | V0.2 | 2023-08-23 23:21:56 +0000 |
+| hartk1213 | [Voron0.2 2.8 Waveshare Display](hartk1213/Voron0.2_2.8_WaveshareDisplay) | 2.8 Waveshare display for V0.2 | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Voron0.2 Rear Keystone Skirt](hartk1213/Voron0.2_Rear_Keystone_Skirt) | Added keystone slot on rear skirt for V0.2 | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Voron0 C14Inlet](hartk1213/Voron0_C14Inlet) | Added a new Power inlet that uses a Fused C14 plug and switch that... | V0.1 | 2023-08-23 23:21:56 +0000 |
+|  | [Voron0 ExtendedLegs](hartk1213/Voron0_ExtendedLegs) | New extended legs to raise the printer up a tiny bit more | V0.1 | 2023-08-23 23:21:56 +0000 |
+|  | [Voron0 ExtrusionSkirt](hartk1213/Voron0_ExtrusionSkirt) | Created a new skirt design that uses 50mm extrusions as legs and it... | V0.1 | 2023-08-23 23:21:56 +0000 |
+|  | [Voron0 Hinged Top Hat](hartk1213/Voron0_Hinged_Top_Hat) | Created a new hinged top hat design for the V0 so it can fold away... | V0.1 | 2023-08-23 23:21:56 +0000 |
+|  | [Voron0 MGN9C X Axis](hartk1213/Voron0_MGN9C_X_Axis) | This mod, replaces the stock MGN7H for MGN9C on the V0 | V0.1 | 2023-08-23 23:21:56 +0000 |
+|  | [Voron0 deck panel](hartk1213/Voron0_deck_panel_with_logo_and_VORON0) | Used @Kruppes blank deck panel to add the logo as well as the name... | V0.1 | 2023-08-23 23:21:56 +0000 |
+|  | [Voron0 display dualcolor](hartk1213/Voron0_display_dualcolor) | Added a dual color file for the Voron Display Front housing | V0.1 | 2023-08-23 23:21:56 +0000 |
+|  | [Voron2.4 GE5C](hartk1213/Voron2.4_GE5C) | This mod replaces the stack of printed z joints with a metal... | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Voron2.4 SexBolt ZEndstop](hartk1213/Voron2.4_SexBolt_ZEndstop) | This mod replaces stock V2 Z endstop with a different style | V2.4, VT | 2023-08-23 23:21:56 +0000 |
+|  | [Voron2.4 and Trident Pins Mod](hartk1213/Voron2.4_Trident_Pins_Mod) | This mod replaces all the M5 screws for all idlers/pulleys/bearings... | V2.4, VT | 2023-08-23 23:21:56 +0000 |
+|  | [Voron2.4 Y Endstop Relocation](hartk1213/Voron2.4_Y_Endstop_Relocation) | This mod relocates the Y endstop to the top A drive piece | V2.4 | 2023-08-23 23:21:56 +0000 |
+| henrikssn | [Parametric Spool Holder](henrikssn/parametric_spool_holder) | Spool holder where the length is a parameter. | V1.8, V2.4, VT | 2023-08-23 23:21:56 +0000 |
+|  | [Plug Panel Mod for Generic...](henrikssn/plug_panel_generic) | v2.4 plug panel for generic unfiltered modules with 66mm x 27mm... | V2.4 | 2023-08-23 23:21:56 +0000 |
+| hergtoler | [Exhaust Housing for 120mm Fan...](hergtoler/exhaust_120mm_duct) | v2.4 Exhaust Housing for 120mm Fan and 4in Duct | V2.4 | 2023-08-23 23:21:56 +0000 |
+| hernsl | [Bottom Panel Mag Clip](hernsl/bottom_panel_mag_clip) | v2.4 magnetic clips to retain bottom panel | V2.4 | 2023-08-23 23:21:56 +0000 |
+| hhammarstrand | [Afterburner connector cover for...](hhammarstrand/afterburner_connector_cover_42STH20-1004AS) | Connector cover for 42STH20-1004AS | VSW | 2023-08-23 23:21:56 +0000 |
+| hijax_pl | [Corner panel clip](hijax_pl/corner_panel_clip) | V2 panel corner frames using 3-way L brackets in the corners | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Din Rail mount](hijax_pl/din_rail_mount) | Adapter to attach DIN Rail to 2020 extrusion. | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Controler Board adapters](hijax_pl/ender_compatible_controller_mount) | DIN (rotated) and legacy adapters for boards like SKR mini E3. | V2.4 | 2023-08-23 23:21:56 +0000 |
+| hoschi | [FYSETC Spider DIN Rail Mount](hoschi/FYSETC_Spider_DIN_Mount) | DIN rail mount for FYSETC Spider | V2.4 | 2023-08-23 23:21:56 +0000 |
+| hymness1 | [10x11mm chain VSW](hymness1/10x11mm_chain_VSW) | Printable and openable 10x11mm chain | V0.2, VSW | 2023-08-23 23:21:56 +0000 |
+|  | [Quickdraw probe Voron Switchwire](hymness1/Quickdraw_probe_Voron_Switchwire) | Detachable magnetic probe with docking system for VSW | VSW | 2023-08-23 23:21:56 +0000 |
+| iblue | [V0.1 Tophat Extractor](iblue/TophatExtractor) | Tophat Extractor for the Voron V0.1 with activated charcoal and... | V0.2 | 2023-08-23 23:21:56 +0000 |
+| jappaj | [V0.1 FanSaver](jappaj/FanSaver) | A printable fix for overheating V0.1 blower fans | V0.2 | 2023-08-23 23:21:56 +0000 |
+| jasonc | [V2.4 Z-Idler Shoulder Bolt Mod](jasonc/Z_Idler_Shoulder_Bolt) | Modification to the idler carriers to accept a 25mm shoulder bolt.... | V2.4 | 2023-08-23 23:21:56 +0000 |
+| jatson | [Plug panel mod for Schurter...](jatson/plug_panel_schurter) | A modified plug panel for Voron 2.4r1 with Schurter CD44.1101.151... | V2.4 | 2023-08-23 23:21:56 +0000 |
+| jaysuk | [4.3 Fly Screen Mount](jaysuk/4.3_fly_screen_mount) | A mount for a 4.3" Fly Screen | V0, V0.1 | 2023-08-23 23:21:56 +0000 |
+| jeoje | [4.3" Touchscreen Mount](jeoje/4.3_Inch_Touchscreen_Mount) | Mounts a [Waveshare 4.3inch Capacitive Touch... | V2.4, VSW | 2023-08-23 23:21:56 +0000 |
+|  | [Molex MLX and Microfit 3.0 Bed...](jeoje/Molex_MLX_Microfit_Bed_Connector_Mount) | Solid mount your bed connectors | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Sturdy Handles](jeoje/Sturdy_Handles) | Modified v2.2 handles with no panel rest and with 4 anchor points | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [V2.4 Z Chain Guide with...](jeoje/Z_Chain_Guide_Thermistor_Mount) | Modifies the Z chain guide to hold a chamber thermistor | V2.4 | 2023-08-23 23:21:56 +0000 |
+| jgehrig | [V0 LCD Touchscreen Skirt](jgehrig/v0_lcdskirt) | 3.2" LCD Touch Screen Skirt | V0.2 | 2023-08-23 23:21:56 +0000 |
+| johanncc | [Raspberry Pi Camera Mount](johanncc/Raspberry_Pi_Camera_Mount) | Low profile raspberry pi camera mount | V0.2 | 2023-08-23 23:21:56 +0000 |
+| joposter | [V0 Clippable LED Caselight](joposter/v0_clippable_ledmounts) | LED Case light for the V0 that clips into the extrusions | V0.2 | 2023-08-23 23:21:56 +0000 |
+| kageurufu | [Euclid Probe Carriage](kageurufu/mgn12-euclid) | A MGN-12 carriage with an inset mount for a Euclid Probe | V1.8, V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| khay | [Fan for V2-200mm²](khay/V2-200_4020_Electronics_Fan) | Middle Skirt for V2-200mm² Electronics Compartment | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [3x Keystone PlugPanel](khay/V2_3x_Keystone_Plugpanel) | PlugPanel with Options for 3 Keystones | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [V0 Micro Backplate](khay/micro_backplate) | Minimalistic backplate for cooler motors and electronics | V0.2 | 2023-08-23 23:21:56 +0000 |
+| kirby | [V0 Sherpa Mini Direct Drive Mod](kirby/v0_sherpa_mini_direct_drive) | A direct drive mod for the V0 using the Annex Sherpa Mini extruder | V0.2 | 2023-08-23 23:21:56 +0000 |
+| lakai | [Bruag Skirts](lakai/Bruag_Skirts) | V2 350mm skirts inspired by Bruag Facades | V2.4 | 2023-08-23 23:21:56 +0000 |
+| leandromarceddu | [PowerSkirt](leandromarceddu/PowerSkirt) | Modified skirtpiece for a digital power monitor | V2.4 | 2023-08-23 23:21:56 +0000 |
+| littleferris | [V0 c14 Skirt Inlet](littleferris/V0_Skirt_Inlet) | V0 C14 Skirt inlet | V0.2 | 2023-08-23 23:21:56 +0000 |
+| madfabrications | [Vertical PSU Mount](madfabrications/Vertical_PSU_Mount) | Mounts the PSU vertically on the DIN rails | V2.4 | 2023-08-23 23:21:56 +0000 |
+| madros | [V0 OLED-skirt](madros/V0_skirt_OLED) | V0 skirt with 0.96" OLED | V0.2 | 2023-08-23 23:21:56 +0000 |
+| maximilian-foerg | [Afterburner Turbo Mod](maximilian-foerg/AB_Turbo_Mod) | A purely cosmetic mod for Afterburner | V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+|  | [Switchwire Double 60mm Fan Mount](maximilian-foerg/VSW_Double_60mm_Fan_Mount) | A mount for two (or four) 60mm fans in SW's electronics compartment | VSW | 2023-08-23 23:21:56 +0000 |
+| mikepthomas | [MKS Mosfet Mount](mikepthomas/MKS_Mosfet_Mount) | MKS Mosfet Mount based of the Trident Raspberry Pi Mount. | V1.8, V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| mjoaris | [10x11 Cable Chain Endcaps](mjoaris/10x11_Cable_Chain_Endcaps) | Printable Endcaps for 10x11 Cable Chains | V1.8, V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Mini12864 LCD Mount](mjoaris/Mini12864_LCD_Mount_for_V2.4) | Swiveling case for the Fysetc Mini12864 LCD | V2.4 | 2023-08-23 23:21:56 +0000 |
+| mosher | [Door hinges with M3 screws shafts](mosher/m3_door_hinges) | Simple mod of print in place door hinges, which uses m3 screws as... | V2.4 | 2023-08-23 23:21:56 +0000 |
+| mpfl | [V0.1 OLED-skirt](mpfl/V0.1_skirt_OLED) | V0.1 skirt with 0.96" OLED | V0.2 | 2023-08-23 23:21:56 +0000 |
+| muradir | [Zodiac BMO Stealthburner Toolhead](muradir/Zodiac_BMO_Stealthburner_Toolhead) | A Stealthburner toolhead for the Zodiac BMO Hotend, based on the... | V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+| natewalck | [V1.8 Jigs](natewalck/v1.8_Jigs) | Jigs for assembling V1.8 | V1.8 | 2023-08-23 23:21:56 +0000 |
+| nhchiu | [V0.1 Movable Pulley Z Drive](nhchiu/V0.1_Movable_Pulley_Z) | A movable pulley system on the Z axis with 1:8 total speed ratio... | V0.1 | 2023-08-23 23:21:56 +0000 |
+| nikolasbabetas | [Neopixel Holder](nikolasbabetas/Neopixel_Holder) | A holder to attach Neopixel/WS2812B Led Strips to the V0.1 | V0.1 | 2023-08-23 23:21:56 +0000 |
+| ommy | [roller brackets](ommy/roller_brackets) | Brackets to help rolling V2 on its side. | V2.4 | 2023-08-23 23:21:56 +0000 |
+| oxno | [RBP Zero Bracket](oxno/rbp_zero_braket) | Bracket for Raspberry pi zero. | V1.8, V2.4 | 2023-08-23 23:21:56 +0000 |
+| padok | [Chain Anchor - ADXL345 mount Mod](padok/chain_anchor-ADXL345_mount) | A ADXL345 mount for the Afterburner | V2.4 | 2023-08-23 23:21:56 +0000 |
+| piet206 | [V1.8 Z Rails Mod](piet206/V1.8._Z_Rails_Mod) | Add MGN12H linear rails for Z axis motion | V1.8 | 2023-08-23 23:21:56 +0000 |
+| prasadp4009 | [StealthBurner CR Touch Mod](prasadp4009/SW_SB_CRTouch) | Voron SW StealthBurner CR Touch Mod | VSW | 2023-08-23 23:21:56 +0000 |
+| quattroerik | [V2.4 Door Hinge M3 3mm 180deg](quattroerik/front_door_m3_180_deg_3mm) | Voron 2.4 door hinges for 3mm panel, 180 deg opening and m3 screw... | V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| randell | [Door Hinges](randell/Door_Hinges) | Door hinges that use an M3 bolt for a pin and bolts thru the panel | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Microswitch Pod for PCB](randell/Microswitch_Endstop) | Modified endstop pod for use of endstop switches mounted on a PCB | V2.4 | 2023-08-23 23:21:56 +0000 |
+| raymondh | [Large Spool Holders](raymondh/LargeSpoolHolders) | Larger spool holders for KVP spools | V1.8, V2.4 | 2023-08-23 23:21:56 +0000 |
+| reQu1em00 | [Kirigami LED Bed Front](reQu1em00/Kirigami_LED_Bed_Front) | Kirigami bed front with space for a single LED or Neopixel button | V0.2 | 2023-08-23 23:21:56 +0000 |
+| reapola | [MKS CANable Pro DIN Mount](reapola/MKS_CANable_Pro_mount) | MKS CANable Pro mount which mounts on a DIN rail | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+| revnull | [Raspberry Pi 7inch Display Mount](revnull/rpi_7in_display_mount) | An articulating mount for the offical Raspberry Pi 7inch touch screen | V2.4 | 2023-08-23 23:21:56 +0000 |
+| richardjm | [ADXL drag chain mount](richardjm/adxl-chain) | Permanent mount for ADXL boards on the back of the motor, replacing... | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Back blanking plate](richardjm/back-plate) | Back blanking plate that can be used instead of the exhaust filter... | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [LED 15.5mm quarter round mounts](richardjm/led-mounts) | Mounting corners with integrated cable runs for 15.5mm quarter... | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Picam corner mount](richardjm/picam-corner) | Out of the way corner mounted picam | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Printable snap latches for 2020...](richardjm/snap-latch-2020) | Quick release panel latch inspired by the work of others. | V2.4 | 2023-08-23 23:21:56 +0000 |
+| rngSplat | [Printable Switchwire Deck Plate](rngSplat/SW_Deck_Plate) | Print a deck plate for Switchwire with debossed Voron logo | VSW | 2023-08-23 23:21:56 +0000 |
+| roboticator24 | [Touchscreen for OctoDash](roboticator24/4inch_touchscreen_mount_for_v2.4) | Mount a 4-inch LCD touchscreen to your V2.4 in place of the usual... | V2.4 | 2023-08-23 23:21:56 +0000 |
+| rsheng118 | [BTT octopus DIN vertical mount](rsheng118/BTT_octopus_DIN_vertical_mount) | DIN vertical mount for Big Tech Tree Octopus board | V2.4 | 2023-08-23 23:21:56 +0000 |
+| ryandam | [Cable Management Duct](ryandam/Cable_management_duct) | Zip tie mount intergrated cable duct to hide your cable | V0.2 | 2023-08-23 23:21:56 +0000 |
+| sammynorway | [LGX stealthburner connector cover](sammynorway/LGX-stealthburner-connector-cover) | Cable cover for LGX and stealthburner | V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+| samwiseg0 | [4 Channel Relay Under Deck Mount](samwiseg0/4channel_relay_under_deck_mount) | Mod to mount a 4 channel GPIO controlled relay | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [AB Plug (Microfit 1x4)](samwiseg0/ab_plug_microfit_1x4) | Mod to mount A & B motor connectors to the gantry | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Corner Cable Hide/Cover (LED Wires)](samwiseg0/corner_cable_hide) | Mod to hide cables around z idlers | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [ESP8266 NodeMCU Din Mount](samwiseg0/esp8266_nodemcu_din_mount) | Din mount for ESP8266 NodeMCU | V2.4, VT | 2023-08-23 23:21:56 +0000 |
+|  | [Extrusion/Chamber Thermistor Mount](samwiseg0/extrusion_thermistor_mount) | Extrusion mount for a NTC100K Thermistor extrusion | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+|  | [LRS PSU Screw Terminal Cover](samwiseg0/lrs_screw_terminal_cover) | Mod to cover the screw terminals for several LRS style PSUs | V0.2, V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+|  | [Microfit 2x3 Skirt Connector (ADXL)](samwiseg0/microfit_2x3_skirt_connector_adxl) | Mod for a Microfit 2x3 connector to be mounted in a skirt | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Corsair Flash Voyager GTX Din Mount](samwiseg0/voyager_gtx_din_mount) | Din carrier for a Corsair Flash Voyager GTX | V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| scanlory | [Clip-On Front Door Frame](scanlory/clip_on_door_frame) | Clip-on frame to stiffen and seal front door panels when using... | V2.4 | 2023-08-23 23:21:56 +0000 |
+| slitte | [PCB_Probe](slitte/PCB_Probe) | PCB for BAT85 and pull up resistor | V2.4, VT | 2023-08-23 23:21:56 +0000 |
+|  | [ssd_bracket](slitte/ssd_bracket) | bracket for mounting a 2.5" ssd to a din rail | V2.4, VT | 2023-08-23 23:21:56 +0000 |
+| sloscotty | [Switchwire Wall Plate](sloscotty/SW_Wall_Plate) | SW plate for enclosure | VSW | 2023-08-23 23:21:56 +0000 |
+|  | [NoNutz TopHat Cam Extension](sloscotty/TopHat_Cam_Extension) | Tophat extension with integrated webcam for V0/0.1 | V0.2 | 2023-08-23 23:21:56 +0000 |
+| spacelab2021 | [Orbiter Clockwork Mount](spacelab2021/Orbiter-Clockwork) | A clockwork adaptor for the Orbiter v1.5 Extruder with full... | V1.8, V2.4, VSW, VT | 2023-08-23 23:21:56 +0000 |
+| sse018 | [Octopus DIN Rail bracket](sse018/Octopus_DIN_Rail_bracket) | A Din rail mount for BTT Octopus board | V2.4 | 2023-08-23 23:21:56 +0000 |
+| strayr | [Creality toolhead for stealthburner](strayr/stealthburner_creality_toolhead) | Use a creality ender 3 style hotend with stealthburner | V1.8, V2.4, VSW | 2023-08-23 23:21:56 +0000 |
+| sttts | [Waveshare 5.5inch HDMI AMOLED Mount](sttts/Waveshare-5.5-inch-HDMI-AMOLED) | Mod to mount a Waveshare 5.5inch full HD display on a V2 | V2.4, VSW | 2023-08-23 23:21:56 +0000 |
+| tallman5 | [Z Locks](tallman5/z-locks) | Helping hands curing v2.4 build, replaces long zip ties. | V2.4 | 2023-08-23 23:21:56 +0000 |
+| tameike | [Din Rail 2020 Holder](tameike/DIN_Rail_2020_holder) | Attaching DIN Rails to 2020 | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Din Rail SKR 90 deg](tameike/DIN_Rail_SKR_1.3_90deg) | SKR V1.3 bracket turned 90 degrees | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Jetpack V0 base](tameike/Jetpack_V0) | Attach Jetpack to V0 frame | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [TacoRaven Mounting Frame](tameike/V0_TR_Mounting_Frame) | TR V0 mount | V0.2 | 2023-08-23 23:21:56 +0000 |
+| tayto-chip | [V2.4 Skirt Switch Mod](tayto-chip/skirt_switch_mod) | Add a ON/OFF Switch to side or front skirts | V2.4 | 2023-08-23 23:21:56 +0000 |
+| teookie | [AB dial indicator mount](teookie/AB_dial_indicator_mount) | Mount for attaching standard dial indicators to AB | V1.8, V2.4, VSW | 2023-08-23 23:21:56 +0000 |
+|  | [SKR Brace](teookie/skr_brace) | Rigidize and stabilize SKR 1.4 mounts | V2.4 | 2023-08-23 23:21:56 +0000 |
+| th0mpy | [BEEFY Din Clips](th0mpy/beefy-din) | Two piece BEEFY Din Clips, holds stronger | V2.4 | 2023-08-23 23:21:56 +0000 |
+| togi | [Exhaust housing side fitting](togi/exhaust_housing_side_fitting) | Moves the exhaust housing bowden fitting 90 degrees to allow the... | V2.4 | 2023-08-23 23:21:56 +0000 |
+| top_gun_de | [mount_for_umbilical](top_gun_de/mount_for_umbilical) | Umbilical guide that goes on the chain anchor | V2.4 | 2023-08-23 23:21:56 +0000 |
+| warriorofwire | [Slenderfan for Afterburner](warriorofwire/slenderfan) | Lighter, quieter, smaller Afterburner | V2.4 | 2023-08-23 23:21:56 +0000 |
+| whoppingpochard | [Extrusion Backers](whoppingpochard/extrusion_backers) | Laser-cut metal pieces to counteract bimetallic frame warping | V2.4 | 2023-08-23 23:21:56 +0000 |
+| wile-e1 | [Deck Panel Support Clips](wile-e1/Deck_Panel_Support_Clips) | Clips to help support lower deck panels to prevent (or fix) warping: | V1.8, V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Stealthburner + CW1 + PCB Cover](wile-e1/Stealthburner_CW1_PCB_Cover) | Low-poly for Stealthburner + CW1 + PCB installations: | V1.8, V2.4, VSW | 2023-08-23 23:21:56 +0000 |
+| wrez | [V0 Alternate IEC 320 C14 Power...](wrez/astrodyne-inlet) | Drop in replacement for alternate-source power inlet if spec inlet... | V0.2 | 2023-08-23 23:21:56 +0000 |
+| xbst_ | [ADXL345 V0 Mount](xbst_/ADXL345_V0_Mount) | V0 Mount for a ADXL345 module | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Car Hood Style Bed Hinge](xbst_/Bed_Hinge) | A way of reaching electronics from the top by having a "car hood"... | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Duct Mount](xbst_/Duct_Mount) | 100mm/4" ducting mount for ventilation. Also supports umbilical... | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [DuetZero](xbst_/DuetZero) | Pi Zero mount over a Duet2 for space saving | V0.2, V1.8, V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [Easy Access Rear Panels](xbst_/Easy_Access_Rear_Panels_v0) | New rear panels designed to expose the extruder for easy filament... | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Flat V2.4 Skirts](xbst_/Flat_Skirts) | Flat V2.4 Skirts so a panel without cutouts can be used | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [HOYMK SSR Mount](xbst_/HOYMK_SSR_Mount) | Mount for Chinese HOYMK SSR | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Hat LED Mount](xbst_/Hat_LED_Mount) | Top Hat LED module mount | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [PCB LED Holder](xbst_/LED_Holder) | Very simple mount for some (?) PCB LED Bars | V1.8, V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [DIN Mount Max31865](xbst_/Max31865_DIN_Mount) | A simple DIN rail mount for the Adafruit (or SAME SIZE clone)... | V1.8, V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [DIN Mount Omron Relay](xbst_/Omron_DIN_Mount) | A simple DIN rail mount for the BOM Relay | V1.8, V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [DIN Mount Pi 4x Relay Board](xbst_/Relay_DIN_Mount) | A simple DIN rail mount for the 4 channel relay board for Raspberry Pi | V1.8, V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [V0 Electronics Cover](xbst_/V0_Electronic_Panel) | A printed cover for v0 electronics. Requires larger printer to print. | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Mobius 4 (M4) V0 Mod](xbst_/V0_M4_Mod) | Mod to mount a M4 extruder to a Voron 0 where pocketwatch extruder... | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [V0 PiCam Mount](xbst_/V0_Picam) | A Raspberry Pi Camera Mount For V0 | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [Screwed Front Door Hinge](xbst_/V0_Screw_Front_Hinge_Mod) | Mod to screw the front door panel (instead of VHB) | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [V0 Buttons & OLED Mount](xbst_/V0_Skirt_Buttons) | Mod to mount custom Gcode macro buttons & Waveshare 1.3" OLED display | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [V2.4 Fanless Middle Skirt](xbst_/V2.4_Fanless_Middle_Skirt) | A Fanless alternative middle side skirt | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [V2.4 Skirt Buttons](xbst_/V2.4_Skirt_Buttons) | Skirt mod for custom Gcode macro buttons | V2.4 | 2023-08-23 23:21:56 +0000 |
+|  | [ZipClip V0](xbst_/ZipClip_v0) | Very simple ziptie mount for v0 1515 extrusions | V0.2 | 2023-08-23 23:21:56 +0000 |
+| xceled | [Single Panel Magnet Mount](xceled/Single_Panel_Magnet_Mount) | Mount your front panel using only magnets | V2.4 | 2023-08-23 23:21:56 +0000 |
+| yenda | [SW More Robust XZ Belt Paths](yenda/vsw_more_robust_belt_paths) | Small mods to belt routing components to ensure a better/more... | VSW | 2023-08-23 23:21:56 +0000 |
+| yeri | [V0 Magnetic Panels](yeri/V0_Magnetic_Panels) | Mount V0 panels with magnets, removes need for hinges and lets you... | V0.2 | 2023-08-23 23:21:56 +0000 |
+|  | [V1 3Z](yeri/V1_3Z) | 3Z mod for V1 | V1.8 | 2023-08-23 23:21:56 +0000 |
+| zruncho | [V0 No-Drop Nuts](zruncho/V0_No_Drop_Nuts) | Voron0 nut inserts which auto-align (LDO frames only) | V0.2 | 2023-08-23 23:21:56 +0000 |
diff --git a/printer_mods/mods.json b/printer_mods/mods.json
index 69060aff1..4cb6042bf 100644
--- a/printer_mods/mods.json
+++ b/printer_mods/mods.json
@@ -1 +1 @@
-[{"path": "1-0-R/handle", "title": "V2.4 handle", "creator": "1-0-R", "description": "Handle for Voron 2.4", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "120decibell/exhaust_housing_side_entry", "title": "Side entry exhaust housing", "creator": "120decibell", "description": "Exhaust housing with dual cover screws and single or dual side...", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "120decibell/huvud_chain_mount", "title": "Huvud Chain Mount", "creator": "120decibell", "description": "Huvud rear mount for Clockwork or LGX that supports a cable chain.", "printer_compatibility": "V1.8, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "3dpandme/Fannypack_zero", "title": "FANnypack zero", "creator": "3dpandme", "description": "Electronics cooling solution for Voron Zero", "printer_compatibility": "V0.2, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "3dpandme/Thermistor_holder_zero", "title": "Thermistor holder zero", "creator": "3dpandme", "description": "Extended thermistor holder for Voron Zero", "printer_compatibility": "V0.2, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "3vilson/V0.1_Skirt_Holes", "title": "V0.1_Skirt_Holes", "creator": "3vilson", "description": "Skirt with Access Holes from the bottom", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "3vilson/V0.1_Skirt_Inlet", "title": "V0.1_Skirt_Inlet", "creator": "3vilson", "description": "Skirt with C14 inlet + New feet to screw into", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "42bios/LED_mount", "title": "LED mount", "creator": "42bios", "description": "AngryLED - LED-mount for Lumentech LT3 profiles.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "42bios/corner_panel_clip_cable", "title": "Corner panel clip w. cable", "creator": "42bios", "description": "Corner panel clip with an internal cable path.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "42bios/exhaust_filter_housing_side", "title": "Exhaust filter housing - side...", "creator": "42bios", "description": "Exhaust filter housing with the G1-8 \"thread on the side.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "42bios/relay_mount", "title": "relay mount", "creator": "42bios", "description": "relay-mount for 2x 2 channel relay modules.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Akio/cable_routing_z_belt_cover", "title": "Hidden cable routing z belt cover", "creator": "Akio", "description": "Z belt covers that allow hidden cable routing.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "AlexanderT-Moss/270-Clamping-Hinges", "title": "270 Clamping Hinges", "creator": "AlexanderT-Moss", "description": "Simple 270 degree hinges that clamp to the front panels instead of...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Andre/Mini_Afterburner_ADXL345_Mount", "title": "Mini Afterburner ADXL345 Mount", "creator": "Andre", "description": "Mount for an AXDL345 on the Mini Afterburner", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Andre/Mini_Afterburner_Strain_Relief", "title": "Mini Afterburner Strain Relief", "creator": "Andre", "description": "A replacement strain relief for the Mini Afterburner toolhead", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Andre/Revo_Nozzle_Skirt_Trident", "title": "Revo Nozzle Skirt", "creator": "Andre", "description": "A Revo nozzle box hidden in a Trident skirt.", "printer_compatibility": "VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Andre/V0_Neopixel_Front_Bed_Mount", "title": "V0 Neopixel Front Bed Mount", "creator": "Andre", "description": "A replacement Front Bed Mount with room for a neopixel or dotstar...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Backenfutter/Mount_for_Electreeks_Camera", "title": "Mount for Electreeks Camera", "creator": "Backenfutter", "description": "This Mod is a simple \"One Piece\" mount for the popular Electreeks...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Badnoob/AB-BN", "title": "AB-BN Afterburner mod (5015)", "creator": "Badnoob", "description": "Improved Afterburner with 5015 fan", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Badnoob/ABBN_for_Stock", "title": "AB-BN for Stock Afterburner (4020)", "creator": "Badnoob", "description": "Improved Dragon and Rapido toolhead for stock Afterburner with 4020...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Badnoob/Precision_AB_Drive", "title": "Precision AB Drive", "creator": "Badnoob", "description": "Changes the gearing for the AB drives to improve both resolution...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Badnoob/Rail_Alignment", "title": "Rail Alignment", "creator": "Badnoob", "description": "Tools and procedure to properly align the rails in 2.4 and Afterburner", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Baltojikale/LoudOwl_aka_Stabby", "title": "LoudOwl aka Stabby", "creator": "Baltojikale", "description": "Alternative dual 5015 part cooling fan toolhead for Afterburner", "printer_compatibility": "V1.8, V2.4, VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "BladeScraper-Designs/CornerPanel_SpoolHolder", "title": "CornerPanel_SpoolHolder", "creator": "BladeScraper-Designs", "description": "A better supported Spool Holder that mounts to a modified corner...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "BladeScraper-Designs/Horizontal-Spool-Holder", "title": "Horizontal Spool Holder", "creator": "BladeScraper-Designs", "description": "Based on the stock holder but mounts to the horizontal extrusions.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "BladeScraper-Designs/Microswitch_Pod_With_Conector", "title": "Microswitch Pod With Connector", "creator": "BladeScraper-Designs", "description": "Microswitch pod with JST-XH 4-pin connector", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Blamm/lrs-100", "title": "LRS-100 DIN mount", "creator": "Blamm", "description": "DIN rail mount for an extra LRS-100 Power Supply", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "BlueBear/Bowden_Fence", "title": "Bowden Fence", "creator": "BlueBear", "description": "A little \"fence\" to hold the tubes away from the belts.", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "BlueBear/Deck_Panel_Backpack", "title": "Deck Panel Backpack", "creator": "BlueBear", "description": "A mounting alternative if you don't want to drill your deck panel", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "BlueBear/Wago_221_mount", "title": "Clippable Wago 221 Mounts", "creator": "BlueBear", "description": "Mounts for Wago 221 to screw or clip-in on 1515 extrusions", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "BlueBear/Ziptie_Mount", "title": "Ziptie Mount", "creator": "BlueBear", "description": "Clippable Ziptie hooks for 1515 extrusions", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Boingomw/Wago_mount", "title": "Wago mount", "creator": "Boingomw", "description": "Smaller 5 port Wago mount that fits parallel to the support rails", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Bondtech/Mini-After-LGX-Lite", "title": "Mini-After-LGX-Lite", "creator": "Bondtech", "description": "LGX Lite Toolhead Setup For Voron V0.1.", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "ByteChild/2_Channel_Relay_DIN_Rail_Bracket", "title": "2-Channel Relay DIN Rail Bracket", "creator": "ByteChild", "description": "DIN Rail mounting bracket for an 2-Channel-Relay", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "ByteChild/ESP32_DIN_Rail_Bracket", "title": "ESP32 DIN Rail Bracket", "creator": "ByteChild", "description": "DIN rail mounting bracket for an ESP32", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "CannedBass/PITFT50_45_degree_mount", "title": "PITFT50 45-degree mount", "creator": "CannedBass", "description": "Mount that puts the screen at a 45-degree angle for more vertical...", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "CannedBass/Trident_Bed_Fans", "title": "Trident Bed Fans", "creator": "CannedBass", "description": "Bed fans for Trident", "printer_compatibility": "VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Ch4rlesB/V0_Handles_Slim", "title": "V0 Handles Slim", "creator": "Ch4rlesB", "description": "Simple and slim handles for the V0", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Chaoticlab/Tool_free_tensioner", "title": "Tool_free_tensioner", "creator": "Chaoticlab", "description": "Tool-free tensioner for Z-Axis", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "ChenTheDesignMaker/Z_Belt_Clip", "title": "Z Belt Clip", "creator": "ChenTheDesignMaker", "description": "Simple clip to keep extra Z belts clean and away from panels", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "D4rkCelerity/Raspberry_Pi_Zero_Bracket", "title": "Raspberry Pi Zero Bracket", "creator": "D4rkCelerity", "description": "Modified version of Trident RPi bracket to fit the smaller RPi Zero", "printer_compatibility": "V0.2, V1.8, V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "DC67/plug_panel_schaffner", "title": "Plug Panel Mod for Schaffner...", "creator": "DC67", "description": "A modified plug panel for the Power Entry Connector Schaffner...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "DaGlo/Voron_V0_Duet_2_WiFi_Mounting_Brackets", "title": "V0.1 Duet 2 Wifi mounting brackets", "creator": "DaGlo", "description": "Voron 0.1 Mounting brackets with/without RPi 4", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "DaGlo/Voron_V0_MW_PS_Bracket", "title": "Voron V0 Mean Well power supply...", "creator": "DaGlo", "description": "Voron V0 Mean Well power supply bracket (Funssor Kit)", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "DaGlo/Voron_V0_SSR_Mount", "title": "Voron V0 SSR Mount", "creator": "DaGlo", "description": "Voron V0 SSR Mount for the bottom", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "DaGrooch13/Tophat_Exhaust_Filter", "title": "Tophat Exhaust Filter V0", "creator": "DaGrooch13", "description": "Activated charcoal exhaust filter with HEPA that replaces the rear...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "DaStivi/the_Cephalopods_limb", "title": "The Cephalopod limb (BTT Octopus...", "creator": "DaStivi", "description": "An alternative Din rail mount for BTT Octopus (PRO) boards", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Dan88/V0skirt", "title": "V0 one-part Skirts", "creator": "Dan88", "description": "One part Skirts for the V0", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Daten/Voron_2.4_Revo_Nozzle_Holder", "title": "Revo hotend skirt case", "creator": "Daten", "description": "A skirt case for the Revo hotends to reside R1 and R2", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "DerekBackus/LED_Holder", "title": "LED Strip Holder", "creator": "DerekBackus", "description": "Simple bracket to mount an LED strip", "printer_compatibility": "", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "DerekBackus/Right_Skirt_Switch", "title": "Trident Right Skirt Switch", "creator": "DerekBackus", "description": "Moves power switch to right front skirt on the Trident", "printer_compatibility": "", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Derpimus/Block_handle_v0.1", "title": "V0.1 Block Handle", "creator": "Derpimus", "description": "V0.1 Block Style Handle", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "DorjeDorf/Duet_3_3HC_Din_Bracket", "title": "Duet 3 3HC Din Bracket", "creator": "DorjeDorf", "description": "V2.4 Duet 3 3HC Din Bracket", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "DorjeDorf/Duet_3_6HC_Din_Bracket", "title": "Duet 3 6HC Din Bracket", "creator": "DorjeDorf", "description": "V2.4 Duet 3 6HC Din Bracket", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Dr-Info/V2.4r2_Z-Drive_Motor_Tensioner_Mod_Rear_Skirts", "title": "V2.4 Rear Skirt Mod for Z-Drive...", "creator": "Dr-Info", "description": "This mod enables the you to utilize the rear skirts, power and...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Dr-Info/corner_cable_cover_with_drop_down_holes", "title": "Corner Cable Cover with Drop Holes", "creator": "Dr-Info", "description": "Corner cable cover around Z-idler with drop holes near z frame and...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "DrGhetto/GhettoPanels", "title": "Ghetto Panels", "creator": "DrGhetto", "description": "Printed panels for the Voron Zero", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "ElPoPo/RemovableDoors", "title": "Removable Doors", "creator": "ElPoPo", "description": "New hinge to easily remove the door and have a wide opening V2.x", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Electroleon/U2C_Mounting", "title": "U2C Mounting", "creator": "Electroleon", "description": "Bigtreetech U2C CAN Interface mounting bracket", "printer_compatibility": "V0.2, V1.8, V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Ellis/15x15_Drag_Chain_End", "title": "15x15 Drag Chain End", "creator": "Ellis", "description": "15x15 drag chain end piece", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Ellis/Badge_Retractor_Mount", "title": "Badge Retractor Mount", "creator": "Ellis", "description": "Extrusion mount for badge retractor to keep bowden tube out of the...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Ellis/Bed_Fans", "title": "Bed Fans", "creator": "Ellis", "description": "Bed fan control macros and 5015 bed fan mounts", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Ellis/Short_Z_Joints", "title": "Short Z Joints", "creator": "Ellis", "description": "Shorter Z joints for the v2.4", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Ellis/Single_MGN9H_Carriage", "title": "Single MGN9H Carriage", "creator": "Ellis", "description": "Single MGN9H toolhead carriage with toolhead x endstop support (for...", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Empusas/BTT_Filament_Motion_Sensor_Mount", "title": "Mounts for BTT Filament Motion...", "creator": "Empusas", "description": "Mounts for Big Tree Tech Smart Filament Motion Sensor", "printer_compatibility": "V0.2, V1.8, V2.4, VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Empusas/PowerSkirt_FN284-10-06", "title": "Power Skirt 2.x FN284-10-06", "creator": "Empusas", "description": "Power Skirt for Schaffner FN284-10-06 V2.x", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Empusas/Terminal_Blocks_NC933_SPL-62", "title": "Mounts for Terminal Blocks NC933...", "creator": "Empusas", "description": "Mounts for Terminal Blocks NC933 and SPL-62 from AliExpress", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Fiction/C270_mount", "title": "C270 mount", "creator": "Fiction", "description": "Logitech C270 webcam front-centre mount", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Fiction/Crossrail", "title": "Crossrail", "creator": "Fiction", "description": "Across-the-rails LRS-200-24 or RSP-200-24 mount using DRP-03 brackets", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Fiction/Exhaust_cover", "title": "Exhaust_cover", "creator": "Fiction", "description": "Cover for exhaust cutout in back panel", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Fiction/Exhaust_cover_SFS", "title": "Exhaust_cover_SFS", "creator": "Fiction", "description": "Exhaust cover and BTT Smart Filament Sensor mount", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Fiction/LGX_Lite_toolhead_PCB_mount", "title": "LGX Lite toolhead PCB mount", "creator": "Fiction", "description": "Mount for Hartk's toolhead PCB(s) for LGX Lite", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "FreeformFez/FilteredPower", "title": "V1.8 Filtered Power Inlet", "creator": "FreeformFez", "description": "V1.6 Filtered Inlet and Rocker Switch for V1.8", "printer_compatibility": "V1.8", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "GSL12/pocketwatch_nema17", "title": "Pocketwatch Nema 17", "creator": "GSL12", "description": "Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe...", "printer_compatibility": "", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "GadgetAngel/Bed_Support_Alignment_Tools", "title": "Bed Support Extrusions Alignment...", "creator": "GadgetAngel", "description": "The bed support alignment tools will assist in helping align the...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "GadgetAngel/Cricut_Voron_Logos", "title": "Cricut Voron Logos", "creator": "GadgetAngel", "description": "For any cutting machines or machines that rely on vector graphics...", "printer_compatibility": "V0.2, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Galvanic/Bowden_Tube_Guide", "title": "Bowden Tube Guide", "creator": "Galvanic", "description": "Bowden tube guide and CANBUS wire support", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "GiulianoM/FlyF407ZG", "title": "Fly F407ZG Mount", "creator": "GiulianoM", "description": "Mount for the Fly F407ZG: https://github.com/FLYmaker/FLYF407ZG", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Gizzle/ender-3_pro_switchwire", "title": "Ender 3 and Ender 3 Pro...", "creator": "Gizzle", "description": "Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics...", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Hobson318/Belt_Tension_Wrench", "title": "Belt Tension Wrench", "creator": "Hobson318", "description": "Wrench for easier turning of the belt tension knobs on V0.1", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Hobson318/Klipper_Expander_Mount", "title": "Klipper Expander Mount", "creator": "Hobson318", "description": "Mounting brackets for the klipper expander using vhb tape or...", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Iakabos/C920_mount", "title": "c920 Mount", "creator": "Iakabos", "description": "Slim mount for logitech c920 webcam", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Iakabos/V0_beltchain", "title": "V0 beltchains", "creator": "Iakabos", "description": "Modified beltchain parts for V0 Z cables", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "JD/RefillPlease", "title": "V2.4 Filament runout sensor", "creator": "JD", "description": "Replace the 2.4 stock bowden tube holder and add a filament runout...", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "JJFX/CRTouch_Snap_Mount", "title": "V2.4 CR Touch Snap Mount", "creator": "JJFX", "description": "Mount to replace v2.4 (MGN9) probe with a Creality CR Touch", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "JNP/Back-Door", "title": "Back Door", "creator": "JNP", "description": "Door for easy hardware access", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "JNP/Deck_Panel_Rear", "title": "Deck Panel", "creator": "JNP", "description": "Covers the hotbed cables", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "JNP/Drawer", "title": "Drawer", "creator": "JNP", "description": "Drawer in four different versions", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "JNP/Front-Door", "title": "Front Door", "creator": "JNP", "description": "Door in a frame", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "JNP/HEPA-Filter", "title": "Hepa Filter", "creator": "JNP", "description": "Filter case with fan\u00b4s", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "JNP/Mid-Panel", "title": "Mid Panel", "creator": "JNP", "description": "Panel for SKR1.4/1.4 or SKR E3 mini mount", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "JNP/Neopixel-Y_Rails", "title": "Neopixel Case", "creator": "JNP", "description": "mounting for Neopixel strip with 8 LED\u00b4s", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "JNP/Side-Panels", "title": "Side Panels", "creator": "JNP", "description": "Panels with intergrated hinge", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Jasrags/sw_fee_slot_filament_passthrough", "title": "Feed slot with filament pass-...", "creator": "Jasrags", "description": "A feed slot with a filament pass-through", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "JeremyRuhland/V2.4_Plug_Panel_Generic_Combo", "title": "V2.4 Plug Panel Generic Combo", "creator": "JeremyRuhland", "description": "Skirt power panel for generic amazon plug/switch/fuse combo module,...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Jon/1515_led_mount", "title": "1515 LED Mount", "creator": "Jon", "description": "Snap in 1515 Led mount for WS2812B", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Jon/V0.1_Z_Cover", "title": "Z Cover for v0.1", "creator": "Jon", "description": "A cover to stop things from dropping down the Z motor and...", "printer_compatibility": "V0.1", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Jon/adxl345_skirt_keystone", "title": "adxl345 skirt keystone", "creator": "Jon", "description": "Skirt keystone for ADXL345 using Microfit 3.0", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "JosAr/Klicky-Probe", "title": "Klicky Probe", "creator": "JosAr", "description": "Microswitch based inductive probe replacement", "printer_compatibility": "V0.2, V1.8, V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "KenadyDwag44/sw_lightbar", "title": "Switchwire Lightbar", "creator": "KenadyDwag44", "description": "A LED lightbar for switchwire", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "KevinAkaSam/VEFACH", "title": "VEFACH", "creator": "KevinAkaSam", "description": "Voron Exhaust Filter Inserts for Activated Coal + Hepa", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "KiloQubit/V0_reverse_bowden_mount", "title": "V0 Reverse Bowden Mount", "creator": "KiloQubit", "description": "V0 reverse bowden mount", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts", "title": "V2.4 Z Chain Mounts for 3 Hole...", "creator": "KiloQubit", "description": "Z chain mounts for 3 hole generic chain", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "KiloQubit/trident_schurter_power_inlet", "title": "Trident Schurter Inlet Skirt", "creator": "KiloQubit", "description": "Trident inlet skirt for mounting a Schurter DD11.0124 or similar inlet", "printer_compatibility": "VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Koios/6mm_Glass", "title": "6mm Tempered Glass Mod", "creator": "Koios", "description": "Lock levers and rests for 6mm Tempered glass panels", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Koios/C920_Mount", "title": "C920 Low Profile Mount", "creator": "Koios", "description": "Low profile mount for a C920 Webcam", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Koios/LED_Mounts", "title": "LED Bar Mounts", "creator": "Koios", "description": "Low profile mount for led bar lights", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Koios/V0_C920_Tophat_Mount", "title": "V0 C920 Tophat Mount", "creator": "Koios", "description": "Mounting bracket for a Logitech C920 on the tophat", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Kosh42EFG/kirigami_bed_front", "title": "Kirigami bed front", "creator": "Kosh42EFG", "description": "Printed bed front for kirigami folded metal bed mount with Voron logo.", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Kruppes/Closed_Bottom", "title": "Encosed Bottom", "creator": "Kruppes", "description": "Modified printed parts and panel to fully enclose V0.", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Kruppes/Deck_Panel_inserts_logo", "title": "V0 Printed Deck with inserts", "creator": "Kruppes", "description": "Electronics Deck Panel using brass heat inserts. Optional with...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Kruppes/Tension_Meter", "title": "Belt Tension Meter", "creator": "Kruppes", "description": "Print in place tension meter to easily tighten multiple belts to...", "printer_compatibility": "V0.2, V1.8, V2.4, VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Kyleisah/CableGator", "title": "CableGator Cable Comb", "creator": "Kyleisah", "description": "A cable comb for simplifying and tidying wire harnesses for...", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "LJ/Scrubby", "title": "Scrubby", "creator": "LJ", "description": "Easy to use filament dust filter", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Le0n/Magnetic_Panels_with_Magnet_Inserts", "title": "Magnetic panels with Magnet Inserts", "creator": "Le0n", "description": "Magnetic panel mounts with magnets inserted into frame slots.", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "LoCoCNC/3mm_tophat_panel_parts", "title": "3mm Top Hat Panels Clips", "creator": "LoCoCNC", "description": "Required to use the 3mm (1/8\") thick top hat panels for V0.1", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "LoCoCNC/MGN7H_Shims", "title": "MGN7H Shims", "creator": "LoCoCNC", "description": "Shims for making bearing cartridges coplanar", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "LoCoCNC/Mosquito_PTFE_Cutting_Jig", "title": "Mosquito PTFE 15mm Tube Cutting Jig", "creator": "LoCoCNC", "description": "Tool to precicely cut 15mm PTFE Tube", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "LoCoCNC/Strain_Relief_w_Microfit", "title": "Strain Relief w/ 10 Pin Microfit", "creator": "LoCoCNC", "description": "Strain Relief with 10 pin Microfit connector", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "LoCoCNC/ssr_strap", "title": "SSR Mounting Strap", "creator": "LoCoCNC", "description": "Mounting Strap for SSR on 1515 Extrusions", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "LoCoCNC/wire_grommets", "title": "V2.4 Bed Wiring Grommet", "creator": "LoCoCNC", "description": "Safely capture your bed wires thru the bottom panel", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "LoganFraser/ComboInlet", "title": "ComboInlet", "creator": "LoganFraser", "description": "Skirt pieces for Trident, 2.4 and 2.4r2 for combo inlets in 2 sizes.", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "LoganFraser/HorseshoeSpoolHolder", "title": "HorseshoeSpoolHolder", "creator": "LoganFraser", "description": "Horseshoe Spool Holder - mounts internally for Trident, or...", "printer_compatibility": "V0.2, V1.8, V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "LoganFraser/PiPlate", "title": "PiPlate", "creator": "LoganFraser", "description": "PiPlate - Raspberry Pi3,4 mounting plate and Skirt Mod for...", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "LoganFraser/TridentInvertedElectronics", "title": "Trident Inverted Electronics", "creator": "LoganFraser", "description": "Flip the Trident electronics bay for top access.", "printer_compatibility": "VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "LoganFraser/WagoMounts", "title": "WagoMounts", "creator": "LoganFraser", "description": "Wago Mounts for Din Rail or 2020 Extrusion mounting.", "printer_compatibility": "V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Long/Mantis_Dual_5015", "title": "Mantis Dual 5015 Toolhead", "creator": "Long", "description": "MGN12 Dual 5015 Toolhead for 2.4 & 1.8", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Lukas/SSD1306_Case_Front_Cover", "title": "SSD1306 Case Front Cover", "creator": "Lukas", "description": "SSD1306 Mount replacement for Mini12864", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "MCMBen/Voron0_Block_and_Tackle_Z_Belt", "title": "Voron0 Block & Tackle Z Belt", "creator": "MCMBen", "description": "A block & tackle belted Z solution using NEMA14. Ratios from 5:1 to...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "MSA/V0-Belt-tension-helper", "title": "Belt tension helper", "creator": "MSA", "description": "Belt tension helper for V0.1", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "MSiemons/TophatHingeV0.1", "title": "Tophat Hinge V0", "creator": "MSiemons", "description": "Simple hinge for V0 Tophat", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Mac10goesBRRRT/BTT_PiTFT", "title": "PiTFT Mount", "creator": "Mac10goesBRRRT", "description": "Mount for the BTT PiTFT Touchscreen", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Majarspeed/Hartk_Mount_Galileo", "title": "Hartk board mount galileo", "creator": "Majarspeed", "description": "It hangs stuff on your tool", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "MakeALeft/Switchwire_Front_Grill", "title": "Switchwire Clean Center Grill", "creator": "MakeALeft", "description": "Removed magnet holders on center panel for cleaner look", "printer_compatibility": "", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "MasturMynd/Stealth_Zero", "title": "Stealth Zero", "creator": "MasturMynd", "description": "A low poly gantry with front tensioners and optional front mounted...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "MathematicalPotato/v0.1_belted_z_drive", "title": "V0.1 Belted Z Drive", "creator": "MathematicalPotato", "description": "Conversion to a belted Z axis for the V0.1 adapted from...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Maverick/MiniSB_LGX_Lite", "title": "MiniSB_LGXL", "creator": "Maverick", "description": "A Bondtech LGX Lite variant of the MiniSB", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Maverick/MiniSB_Rapido", "title": "MiniSB_Rapido", "creator": "Maverick", "description": "Modified MiniSB to use a Rapido hotend", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Maverick/MiniSB_Sharkfin", "title": "MiniSB_Sharkfin", "creator": "Maverick", "description": "Modified MiniSB to use a Sharkfin Extruder", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Maverick/V0.2_Handles", "title": "V0.2 Handles", "creator": "Maverick", "description": "Add handles to the extrusion tophat", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Maverick/V0.2_Stealth_Skirts", "title": "V0.2 Stealth Skirts", "creator": "Maverick", "description": "Juiced up skirts for the V0.2", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Mckurt/Switchwire_Y_Belt_Tensioner", "title": "Switchwire Y Belt Tensioner", "creator": "Mckurt", "description": "Switchwie Y axis Belt Tensioner", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Mellow/V0_Fly-Gemini", "title": "V0 Fly-Gemini", "creator": "Mellow", "description": "Fly-Gemini adapted model for V0", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail", "title": "LGX mount for V0.1 with 2nd X rail", "creator": "MikesMods", "description": "V0.1 mod for mounting Bondtech LGX extruder with addition of 2nd X...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Minsekt/Rear_Umbilical", "title": "Rear Umbilical", "creator": "Minsekt", "description": "Rear Umbilical mounting solution including a relocated Y-Endstop", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "MrBean66/SKR_PRO_Mount", "title": "SKR Pro DIN Mount", "creator": "MrBean66", "description": "Simple mod to mount the SKR Pro board from BTT to a DIN rails.", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "MrDespair/MiniAB_Pinda", "title": "MiniAB Pinda Probe Mount", "creator": "MrDespair", "description": "Replacement MiniAB Cowling to add a mount for a Pinda style probe.", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Mrgl-Mrgl/LGX_Lite_Mount", "title": "LGX Lite Mount", "creator": "Mrgl-Mrgl", "description": "a mount for the LGX Lite", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Nashuar/V0_Dragon_ToolheadStockScrews", "title": "V0 Dragon Toolhead M2.5x8", "creator": "Nashuar", "description": "This toolhead uses the stock M2.5 screw that came with the dragon...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Nomsplease/60mm_Shaft_Jig", "title": "60mm Shaft Jig", "creator": "Nomsplease", "description": "Simple jig for cutting and grinding 60mm Z shafts", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Nomsplease/V0_Mods/duet_wifi_mount", "title": "Duet Wifi Mount", "creator": "Nomsplease", "description": "Duet wifi mount in pocketwatch location", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Nomsplease/V0_Mods/led_mounts", "title": "LED Mounts", "creator": "Nomsplease", "description": "Basic LED mounts for 10 and 12mm strips", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Nomsplease/V0_Mods/panel_mounts", "title": "Remixed Panel Mounts", "creator": "Nomsplease", "description": "Remixed rear bottom panel mounts with stop", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Nomsplease/V0_Mods/pi_zero_camera_mount", "title": "Pi Cam/ZeroW Mount", "creator": "Nomsplease", "description": "Mount for pi camera and ZeroW", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Nomsplease/V0_Mods/pocket_watch_rear_relocation", "title": "Pocket Watch Rear Reolcation...", "creator": "Nomsplease", "description": "Pocket watch rear reolcation bracket", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Oakman/BTT_24V_UPS_Metal_DIN_Mount", "title": "BTT 24V UPS Metal DIN Mount", "creator": "Oakman", "description": "Adapter to use a metal DIN mount for the BTT 24V UPS", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Oakman/FYSETC_Spider_Metal_DIN_Mount", "title": "FYSETC Spider Metal DIN Mount", "creator": "Oakman", "description": "Use a metal DIN mount for your FYSETC Spider", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Oakman/RPI_Metal_DIN_Mount", "title": "RPI Metal DIN Mount", "creator": "Oakman", "description": "Adapter for metal DIN mounting the Raspberry Pi", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "OboMaker3D/C17-EXT", "title": "C17-EXT Filter HEPA Carbon", "creator": "OboMaker3D", "description": "Replaces standard filter with new HEPA Crabon and 120mm fan V1.1", "printer_compatibility": "V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "OboMaker3D/C17-EXT-CARTRIDGE", "title": "C17-EXT-CARTRIDGE for C17-EXT...", "creator": "OboMaker3D", "description": "Alternative to a commercial cartridge for the C17-EXT filter", "printer_compatibility": "V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Phalanx/Other-V2-Idlers", "title": "\"Other\" Idlers Mod", "creator": "Phalanx", "description": "Allow usage of wider toolheads on the V2", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch", "title": "V0.1 Z nozzle endstop switch", "creator": "Polar-Ted", "description": "Sexbolt style switch for V0", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Polar-Ted/V0_Two_Piece_Back_Panel", "title": "V0.1 Two Piece Back Panel", "creator": "Polar-Ted", "description": "Vented 2 piece back panel for V0", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Polared/Power_Inlet_w_Keystone_Insert", "title": "Power Inlet with Keystone Insert", "creator": "Polared", "description": "Voron 0.1 Power inlet with keystone insert slot", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Printopal/Magnetic_top_panel", "title": "Magnetic top panel", "creator": "Printopal", "description": "Top panel with magnets allows for quick installation and removal", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "PsychoShaft/C92X_PsycHoShafts_Mount", "title": "C92X_PsycHoShafts_Mount", "creator": "PsychoShaft", "description": "2020 Top profile 920 camera mount / 2 point axis pivot", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "QuackProfit/V0-Adafruit-Y_Rails", "title": "V0 Adafruit NeoPixel LED Mounts", "creator": "QuackProfit", "description": "Mount Adafruit PCB NeoPixel Sticks on the V0 Y-rail extrusions", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Rhastlyn/60mmFanCover", "title": "60mm Fan Cover", "creator": "Rhastlyn", "description": "A easy to install cover for spec 60mm fans originally designed for...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Rhastlyn/WansviewCameraMount", "title": "Wansview 1080p Camera Mount", "creator": "Rhastlyn", "description": "A camera mount that replaces the OEM part to allow the camera to be...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "RockNLol/RockNRoll", "title": "RockNRoll", "creator": "RockNLol", "description": "Rockers to roll the printer on its back for easier access to the...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "ScramblerUSA/SideSkirtPowerSwitch", "title": "Side Skirt Power Switch", "creator": "ScramblerUSA", "description": "Skirt-mounted rocker switch for easy access for Voron 2.4", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "See1807/Voron_V0_Exhaust_and_LED_Mod", "title": "TopHat Exhaust and LED Light", "creator": "See1807", "description": "A mount for 10mm LED strips and Exhaust for Voron V0", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Shiftingtech/Trident_dual_power_switch", "title": "Trident Dual Power Switch", "creator": "Shiftingtech", "description": "A replacement skirt, allowing 2 power switches", "printer_compatibility": "VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "ShinyPants/Orange_Pi_3_LTS_DIN", "title": "OrangePi 3 LTS DIN Rail bracket", "creator": "ShinyPants", "description": "A DIN rail mount for OrangePi LTS 3", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Shteeeeeve/V01-LED-Tophat", "title": "V0.1 LED Tophat", "creator": "Shteeeeeve", "description": "V0.1 LED Tophat w/ 24V LED Lightstrip", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Slidr/PanzerBalls2.4", "title": "PanzerBalls 2.4", "creator": "Slidr", "description": "Squash Ball Feet for V2.4", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Slidr/PanzerChain2.4", "title": "PanzerChain 2.4", "creator": "Slidr", "description": "Energychain for V2.4", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Spaghetti-Bolognese/LCD_case_mod", "title": "LCD Case Mod", "creator": "Spaghetti-Bolognese", "description": "Improvements to the V2.4 mini12864 LCD case inc E-stop button cover", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Spaghetti-Bolognese/Z_drive_motor_mount", "title": "Simplified Z Drive Motor Mount", "creator": "Spaghetti-Bolognese", "description": "Z drive motor mount bracket mod to improve pulley to belt alignment", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "StvPtrsn/320mm_Build", "title": "Skirts for a 320mm Build", "creator": "StvPtrsn", "description": "Skirts for a 320mm build", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "StvPtrsn/Keystone_Jack_Filtered_Mains_Panel", "title": "Keystone Jack for Filtered Mains...", "creator": "StvPtrsn", "description": "Add a keystone jack to your filtered mains plug panel", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "StvPtrsn/Parts_Jigs_and_Mods", "title": "Parts_Jigs and Mods", "creator": "StvPtrsn", "description": "Parts, Jigs and modifications I use for my builds", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "StvPtrsn/Side_Fan_Support_No_Tape", "title": "Side Fan Support, No Tape", "creator": "StvPtrsn", "description": "Mount the 60mm side fans and inserts without tape", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Takuya/USBCameraMount", "title": "WANSVIEW USB Camera Mount", "creator": "Takuya", "description": "WANSVIEW 1080p Camera Mount for Voron 2.4", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "TheSquiffy/V0_Belts_holder", "title": "V0 Belts holder", "creator": "TheSquiffy", "description": "V0 Belts Holder", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "TiagoBarata/Logitech_C270_Mount", "title": "Logitech C270 Mount", "creator": "TiagoBarata", "description": "Logitech C270 Top Center Mount", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Tircown/DIN_mount_RS-15-5", "title": "DIN mount RS-15-5 PSU", "creator": "Tircown", "description": "A DIN mount for the RS-15-5", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Tircown/Display_mount_5inch", "title": "Display mount 5\"", "creator": "Tircown", "description": "Tiltable mount for a 5\" tactile display", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Tircown/Raspberry_plug_panel", "title": "Raspberry in plug panel", "creator": "Tircown", "description": "Raspberry mount vertically in the plug panel, allow easy access to...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Tircown/V01_skirt_buttons", "title": "V0.1 Skirt buttons", "creator": "Tircown", "description": "Buttons for V0.1 spec skirts", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Triano/Ender_3Pro_Switchwire", "title": "Ender 3 Pro or V2 to Switchwire Mod", "creator": "Triano", "description": "Convesion of an Ender 3 Pro or V2 to a Switchwire", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Ultrawaffles/Ender_3_to_SW", "title": "Ender 3 to SW conversion", "creator": "Ultrawaffles", "description": "A conversion mod for the ender 3 to switchwire. Designed to allow...", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "VinnyCordeiro/RGB_LED_grid_for_SB", "title": "RGB LED grid for Stealthburner", "creator": "VinnyCordeiro", "description": "A small RGB LED grid for Stealthburner's logo", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Weaslus/Electronics-Bay-Seperator", "title": "Electronics Bay and Enclosure...", "creator": "Weaslus", "description": "Better enclose chamber and keep heat from electronics", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "ZZP8202/Pull-out_electrical_store", "title": "Pull-out electrical store", "creator": "ZZP8202", "description": "Voron 2.4 Pull-out electrical store\uff08350mm only\uff09", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Zen3D/V0_1515_T-nut", "title": "V0 1515 T-nut", "creator": "Zen3D", "description": "M3 square and hex nuts for Voron0 1515 frame", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Zen3D/V0_Handle", "title": "V0 Handle", "creator": "Zen3D", "description": "Voron0 Handle for 3mm panels", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Zen3D/V0_MidPanel_HexPattern", "title": "V0 MidPanel HexPattern", "creator": "Zen3D", "description": "Voron0 MidPanel with Hex pattern and Wire cover", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "Zen3D/V0_Skirt", "title": "V0 Skirt set", "creator": "Zen3D", "description": "SSR, PowerSwitch, Adxl, Nameplate and color change printing", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "aTinyShellScript/RS_PSU_DIN_Brackets", "title": "RS PSU DIN Bracket", "creator": "aTinyShellScript", "description": "DIN brackets for MeanWell RS PSUs with 80mm spacing.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "ademuri/Lights_Camera_Voron", "title": "Lights, Camera, Voron", "creator": "ademuri", "description": "A mount for LED strips and Picam for the V0.1", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "aeresov/MeanWell_UHP_DIN_mount", "title": "MeanWell UHP-xxx DIN mount", "creator": "aeresov", "description": "A bracket for MeanWell UHP series PSU (200, 350 and 500) to mount...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "aeresov/Raspberry_Pi_DIN_mount", "title": "Raspberry Pi DIN mount", "creator": "aeresov", "description": "A bracket for Raspberry Pi 3/4 to mount it onto DIN rail, along or...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "aeresov/SKR_DIN_mount", "title": "SKR 1.3/1.4 DIN mount", "creator": "aeresov", "description": "A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "aeresov/TL_filament_sensor_bracket", "title": "TL filament sensor bracket", "creator": "aeresov", "description": "A bracket for TL filament sensor to mount near stock spool holder.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "aeresov/cable_tie_DIN_mount", "title": "cable tie DIN mount", "creator": "aeresov", "description": "A bracket for cable ties to route cables across DIN rails.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "al3ph/analog_timer_mount", "title": "Analog Timer Mount", "creator": "al3ph", "description": "A skirt mount for analog timer", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "al3ph/filament_runout", "title": "Filament Runout Sensor", "creator": "al3ph", "description": "A simple filament runout sensor", "printer_compatibility": "V0.2, V1.8, V2.4, VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "al3ph/led_mount", "title": "LED Mount", "creator": "al3ph", "description": "A mount for 10mm LED WS2812 strips", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "al3ph/pl05_mount", "title": "PL05 Sensor Mount", "creator": "al3ph", "description": "A mount PL05 inductive sensor", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "alanho/BTT_PITFT50_v2_Mount", "title": "BTT PITFT50 v2 Mount", "creator": "alanho", "description": "A mount for the BTT PITFT50 v2 Touch Display", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "albert/IKEA_Dioder_Led_Mount", "title": "IKEA Dioder Led Mount", "creator": "albert", "description": "A mount for the IKEA Dioder LED strip", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "antoinecellerier/ds18b20-sensor-mount", "title": "DS18B20 Sensor Mount", "creator": "antoinecellerier", "description": "DS18B20 temperature sensor mount", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "ardichoke/v0-long-thumb-nut", "title": "V0 Long Thumb Nut", "creator": "ardichoke", "description": "Taller thumb nuts for V0 bed", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "arkeet/dti-mount", "title": "Dial test indicator mount", "creator": "arkeet", "description": "A toolhead mount for a dial test indicator, where the tip is...", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "arkeet/magnet-fan-cover", "title": "Magnetic hotend fan cover", "creator": "arkeet", "description": "A replacement hotend fan cover, held with magnets instead of screws.", "printer_compatibility": "V1.8, V2.4, VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "arkeet/mgn12", "title": "MGN12 X-axis", "creator": "arkeet", "description": "Replaces the dual MGN9H rails with a single MGN12H.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "arkeet/v0-dc-inlet", "title": "V0 DC inlet", "creator": "arkeet", "description": "Skirt inlet for external 24V DC power supply.", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "baccula/revo_skirt_nozzle_holder", "title": "Revo Nozzle Holder for v2.4 350", "creator": "baccula", "description": "A remix of Andre's design allowing for skirt storage of 4 E3D Revo...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "beaugalbraith/Nova_Printhead", "title": "Nova Printhead", "creator": "beaugalbraith", "description": "Use Nova Hotend with Afterburner", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "bobbleheed/Filament_Runout", "title": "Filament Runout Sensor", "creator": "bobbleheed", "description": "Filament runout sensor that replaces the stock bowden retainer", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "bobbleheed/Magnetic_Panels", "title": "Magnetic Panels", "creator": "bobbleheed", "description": "Magnetic clips to allow for easy removal and installation of panels", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "btp/Galileo_Switchwire_Chain_Mount", "title": "Galileo chain mount (befenybay)", "creator": "btp", "description": "Modified chain mount position to cater for difference with Galileo...", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "buzzdalf/connector_cover", "title": "v1.8/2.4 Afterburner connector...", "creator": "buzzdalf", "description": "v1.8/2.4 Connector cover for 42STH20-1004AS", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "buzzdalf/ender_switchwire_taller_z", "title": "Ender 3 Switchwire Taller Z Mod", "creator": "buzzdalf", "description": "Taller Z Mod", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "buzzdalf/ytension", "title": "Ender 3 Switchwire Y Tensioner Mod", "creator": "buzzdalf", "description": "Y Tension Mod", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "bythorsthunder/MGN9_Backers", "title": "MGN9 Backers Idlers", "creator": "bythorsthunder", "description": "New idler uppers for MGN9 Extrusion backers", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "bythorsthunder/Stealthburner_Rapido_Uhf", "title": "Stealthburner Rapido UHF", "creator": "bythorsthunder", "description": "Stealthburner mod for Rapido UHF", "printer_compatibility": "V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "chirpy/NozzleWiper", "title": "V0.1 Nozzle Wiper", "creator": "chirpy", "description": "Servo powered nozzle wiper and purge bucket", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "chirpy/RunoutUnklicky", "title": "Runout UnKlicky Sensor", "creator": "chirpy", "description": "Runout UnKlicky Sensor is a filament runout sensor with mounts for...", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "chirpy/TipTophat", "title": "V0.1 Raised Tophat", "creator": "chirpy", "description": "Alternative Tophat design that uses stock panels and raises height...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "chri.kai.in/20x20mm_Profile_Covers", "title": "20x20mm Profile Covers", "creator": "chri.kai.in", "description": "Provide overlapping and flush slot covers for 20x20mm slot6...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "chri.kai.in/Angry_CAM_USB", "title": "Angry CAM USB", "creator": "chri.kai.in", "description": "Housing for small USB camera module, allowing mounting to gantry or...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "chri.kai.in/Exhaust_Adapter_100mm", "title": "Exhaust Adapter 100mm", "creator": "chri.kai.in", "description": "Replace 60mm exhaust fan with 100mm ventilation system adapter", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "chrisrgonzales/270_degree_hinge", "title": "270\u00b0 Front Panel Hinge", "creator": "chrisrgonzales", "description": "Hinges that have 270\u00b0 of swivel, parametric CAD included", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "christophmueller/Phaetus_Dragonfly_BMO_Afterburner", "title": "Phaetus and Zodiac Dragonfly BMO...", "creator": "christophmueller", "description": "Covers both the original Phaetus variant as well as the Zodiac one.", "printer_compatibility": "V1.8, V2.4, VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "claytono/2.4-extrusion-jig", "title": "Voron 2.4 Extrusion Jig", "creator": "claytono", "description": "A jig help align extrusions to get a properly square frame", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "claytono/fysetc-s6-v2-mount", "title": "Fysetc S6 V2 Mount", "creator": "claytono", "description": "DIN Mount for the Fysetc S6 V2 controller", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "claytono/v0-zip-tie-skirts", "title": "V0 Zip Tie Skirts", "creator": "claytono", "description": "V0 skirts with small loops added along the top to allow zip tyiing...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "clee/Monster8_heatsert_mount", "title": "Monster8 DIN Rail Mounts", "creator": "clee", "description": "DIN mount for Makerbase Monster8 V1/V2 controller", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "cmrny/v01_motor_panel_no_rub", "title": "V0.1 Motor Panel Modification", "creator": "cmrny", "description": "V0.1 Motor panel modification to keep umbilical and bowden tube...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "conqueror433/Voron_Parts_Logo", "title": "Voron Parts Logo", "creator": "conqueror433", "description": "Voron Parts Logo for your back panels, 3D Print or Laser Cut", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "conqueror433/Voron_V0.1_Parts_Logo", "title": "Voron V0.1 Parts Logo", "creator": "conqueror433", "description": "Voron Parts Logo for your V0 deck panel", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "consibonsi/Y-Mod_SW_9mm", "title": "Y-Mod SW 9mm", "creator": "consibonsi", "description": "9mm Y belt mod for SW", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "csch0/SW_FanMount_No_Tape", "title": "SW Fan Mount No Tape", "creator": "csch0", "description": "60x20 Fan Mount for SW without tape", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "d3nny/mains_plug_panel_for_RND_165-00057", "title": "Filtered Power Plug with...", "creator": "d3nny", "description": "Filtered Power Plug for RND 165-00057 and CAT6-Plug", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "davidauvergne/Center_cable_management_duct", "title": "Center_cable_management_duct", "creator": "davidauvergne", "description": "Mod for a centered cable management", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "dePrintinator/HEPA_Filter_Exhaust", "title": "HEPA Exhaust", "creator": "dePrintinator", "description": "HEPA filter chamber exhaust replacement.", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "deepfriedheroin/v0_bed_wagos", "title": "v0 Wago Bed Mounts", "creator": "deepfriedheroin", "description": "Easy to install Wago mounts for the v0", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "deepfriedheroin/v0_power_wagos", "title": "v0 Power Wagos", "creator": "deepfriedheroin", "description": "Easy to install Wago mounts for v0 mains", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "deepfriedheroin/v2_bed_wagos", "title": "V2 Bed Wagos", "creator": "deepfriedheroin", "description": "Wire management for the v2 bed", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "doubletrouble/V0_Skirt_Mod", "title": "V0 Skirt Mod", "creator": "doubletrouble", "description": "V0 Skirt Mod", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "eamars/stealthburner_crazy_dragon_toolhead", "title": "Stealthburner (RC1) Dragon...", "creator": "eamars", "description": "The Stealthburner toolhead mount for Mellow Crazy, TriangleLab...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "eddie/LED_Bar_Clip", "title": "LED Bar Clip", "creator": "eddie", "description": "Modular LED Clip for mounting LED Strip to 2020 Extrusions", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "eddie/V1.8_12mm_Z_Mod", "title": "V1.8 12mm Z Mod", "creator": "eddie", "description": "Add V1.8 option for 12mm Z rods", "printer_compatibility": "V1.8", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "edwardyeeks/Tridentified_V2.4_Power_Inlet", "title": "Tridentified V2.4 Power Inlet", "creator": "edwardyeeks", "description": "Trident style side power inlet for V2.4 using Z Drive Motor...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "elcrni/Trident_Internal_Spool_Holder", "title": "Trident Internal Spool Holder", "creator": "elcrni", "description": "Internal spool holder for 300 and 350 Tridents. Supports full size...", "printer_compatibility": "VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "elcrni/V2.4-Trident-Spool-Holders", "title": "V.24/Trident Spool Holder", "creator": "elcrni", "description": "Spool holder that mounts on top for \"too close to the wall\" printers", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "evandepol/Crydom-GN-Guard", "title": "Crydom GN Terminal Guard", "creator": "evandepol", "description": "A simple safety guard for the terminals on a Crydom GN SSR", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "evandepol/Voron2.4-Cable-clamps", "title": "Voron 2.4 cable clamps", "creator": "evandepol", "description": "A set of 2020-mounted cable guards to organize and dress the wiring...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "falo/lgx_lite_side_can", "title": "LGX Lite CAN Side Mount", "creator": "falo", "description": "A side mounting for a CAN board (Huvud/SHT42) to the LGX Lite", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "falo/magnetic_grill_cover", "title": "Magnetic Exhaust Grill Cover", "creator": "falo", "description": "A magnetic cover to seal the filtered exhaust", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "falo/toolhead_pcb_to_can", "title": "Toolhead PCB to CAN Mount Adaptor", "creator": "falo", "description": "A mount to enable side mounting of a CAN board (Huvud/SHT42) in...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "filotto78/6mm_slot_cover", "title": "6mm slot cover", "creator": "filotto78", "description": "Simple cover for extrusion with 6mm slot width", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "gamebofh/door-panels", "title": "Laser cut door panels", "creator": "gamebofh", "description": "Files to allow you to create laser cut door panels with some...", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "gauravmm/crazy_mozzie_cw2", "title": "Crazy Mozzie HF toolhead SB+CW2", "creator": "gauravmm", "description": "Toolhead for Crazy Mozzie HF, compatible with Stealthburner and...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "gen2eng/z_carriage_stop_pass_through", "title": "Switchwire LED wire pass through", "creator": "gen2eng", "description": "Z Carriage Stop modification that makes pass through of wires for...", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "geoffreyyoung/dual_rail_guide", "title": "Dual Rail Installation Guide", "creator": "geoffreyyoung", "description": "Rail installation guide that also works for the 2.4 dual rail...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "geoffreyyoung/lgx", "title": "LGX Info, Links, and Models", "creator": "geoffreyyoung", "description": "Useful information and models for using the Bondtech LGX extruder...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "gerritwellen/manta-m8p-bracket", "title": "Manta M8P Mount", "creator": "gerritwellen", "description": "Mounting Bracket for BTT Manta M8P", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "golas/v0-extended-tophat-hinge", "title": "V0.1 Extended tophat hinge", "creator": "golas", "description": "Extended tophat for v0.1 with hinges (integrated or screwed ones).", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "golas/v0-trident-skirt-mix", "title": "V0.1 Trident skirt remix with...", "creator": "golas", "description": "Trident style v0.1 skirt mix with 12864 Mini Lcd on front or plain...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hartk1213/Voron0.2_2.8_WaveshareDisplay", "title": "Voron0.2 2.8 Waveshare Display", "creator": "hartk1213", "description": "2.8 Waveshare display for V0.2", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hartk1213/Voron0.2_Rear_Keystone_Skirt", "title": "Voron0.2 Rear Keystone Skirt", "creator": "hartk1213", "description": "Added keystone slot on rear skirt for V0.2", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hartk1213/Voron0_C14Inlet", "title": "Voron0 C14Inlet", "creator": "hartk1213", "description": "Added a new Power inlet that uses a Fused C14 plug and switch that...", "printer_compatibility": "V0.1", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hartk1213/Voron0_ExtendedLegs", "title": "Voron0 ExtendedLegs", "creator": "hartk1213", "description": "New extended legs to raise the printer up a tiny bit more", "printer_compatibility": "V0.1", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hartk1213/Voron0_ExtrusionSkirt", "title": "Voron0 ExtrusionSkirt", "creator": "hartk1213", "description": "Created a new skirt design that uses 50mm extrusions as legs and it...", "printer_compatibility": "V0.1", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hartk1213/Voron0_Hinged_Top_Hat", "title": "Voron0 Hinged Top Hat", "creator": "hartk1213", "description": "Created a new hinged top hat design for the V0 so it can fold away...", "printer_compatibility": "V0.1", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hartk1213/Voron0_MGN9C_X_Axis", "title": "Voron0 MGN9C X Axis", "creator": "hartk1213", "description": "This mod, replaces the stock MGN7H for MGN9C on the V0", "printer_compatibility": "V0.1", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hartk1213/Voron0_deck_panel_with_logo_and_VORON0", "title": "Voron0 deck panel", "creator": "hartk1213", "description": "Used @Kruppes blank deck panel to add the logo as well as the name...", "printer_compatibility": "V0.1", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hartk1213/Voron0_display_dualcolor", "title": "Voron0 display dualcolor", "creator": "hartk1213", "description": "Added a dual color file for the Voron Display Front housing", "printer_compatibility": "V0.1", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hartk1213/Voron2.4_GE5C", "title": "Voron2.4 GE5C", "creator": "hartk1213", "description": "This mod replaces the stack of printed z joints with a metal...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hartk1213/Voron2.4_SexBolt_ZEndstop", "title": "Voron2.4 SexBolt ZEndstop", "creator": "hartk1213", "description": "This mod replaces stock V2 Z endstop with a different style", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hartk1213/Voron2.4_Trident_Pins_Mod", "title": "Voron2.4 and Trident Pins Mod", "creator": "hartk1213", "description": "This mod replaces all the M5 screws for all idlers/pulleys/bearings...", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hartk1213/Voron2.4_Y_Endstop_Relocation", "title": "Voron2.4 Y Endstop Relocation", "creator": "hartk1213", "description": "This mod relocates the Y endstop to the top A drive piece", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "henrikssn/parametric_spool_holder", "title": "Parametric Spool Holder", "creator": "henrikssn", "description": "Spool holder where the length is a parameter.", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "henrikssn/plug_panel_generic", "title": "Plug Panel Mod for Generic...", "creator": "henrikssn", "description": "v2.4 plug panel for generic unfiltered modules with 66mm x 27mm...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hergtoler/exhaust_120mm_duct", "title": "Exhaust Housing for 120mm Fan...", "creator": "hergtoler", "description": "v2.4 Exhaust Housing for 120mm Fan and 4in Duct", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hernsl/bottom_panel_mag_clip", "title": "Bottom Panel Mag Clip", "creator": "hernsl", "description": "v2.4 magnetic clips to retain bottom panel", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hhammarstrand/afterburner_connector_cover_42STH20-1004AS", "title": "Afterburner connector cover for...", "creator": "hhammarstrand", "description": "Connector cover for 42STH20-1004AS", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hijax_pl/corner_panel_clip", "title": "Corner panel clip", "creator": "hijax_pl", "description": "V2 panel corner frames using 3-way L brackets in the corners", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hijax_pl/din_rail_mount", "title": "Din Rail mount", "creator": "hijax_pl", "description": "Adapter to attach DIN Rail to 2020 extrusion.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hijax_pl/ender_compatible_controller_mount", "title": "Controler Board adapters", "creator": "hijax_pl", "description": "DIN (rotated) and legacy adapters for boards like SKR mini E3.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hoschi/FYSETC_Spider_DIN_Mount", "title": "FYSETC Spider DIN Rail Mount", "creator": "hoschi", "description": "DIN rail mount for FYSETC Spider", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hymness1/10x11mm_chain_VSW", "title": "10x11mm chain VSW", "creator": "hymness1", "description": "Printable and openable 10x11mm chain", "printer_compatibility": "V0.2, VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "hymness1/Quickdraw_probe_Voron_Switchwire", "title": "Quickdraw probe Voron Switchwire", "creator": "hymness1", "description": "Detachable magnetic probe with docking system for VSW", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "iblue/TophatExtractor", "title": "V0.1 Tophat Extractor", "creator": "iblue", "description": "Tophat Extractor for the Voron V0.1 with activated charcoal and...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "jappaj/FanSaver", "title": "V0.1 FanSaver", "creator": "jappaj", "description": "A printable fix for overheating V0.1 blower fans", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "jasonc/Z_Idler_Shoulder_Bolt", "title": "V2.4 Z-Idler Shoulder Bolt Mod", "creator": "jasonc", "description": "Modification to the idler carriers to accept a 25mm shoulder bolt....", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "jatson/plug_panel_schurter", "title": "Plug panel mod for Schurter...", "creator": "jatson", "description": "A modified plug panel for Voron 2.4r1 with Schurter CD44.1101.151...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "jaysuk/4.3_fly_screen_mount", "title": "4.3 Fly Screen Mount", "creator": "jaysuk", "description": "A mount for a 4.3\" Fly Screen", "printer_compatibility": "V0, V0.1", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "jeoje/4.3_Inch_Touchscreen_Mount", "title": "4.3\" Touchscreen Mount", "creator": "jeoje", "description": "Mounts a [Waveshare 4.3inch Capacitive Touch...", "printer_compatibility": "V2.4, VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "jeoje/Molex_MLX_Microfit_Bed_Connector_Mount", "title": "Molex MLX and Microfit 3.0 Bed...", "creator": "jeoje", "description": "Solid mount your bed connectors", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "jeoje/Sturdy_Handles", "title": "Sturdy Handles", "creator": "jeoje", "description": "Modified v2.2 handles with no panel rest and with 4 anchor points", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "jeoje/Z_Chain_Guide_Thermistor_Mount", "title": "V2.4 Z Chain Guide with...", "creator": "jeoje", "description": "Modifies the Z chain guide to hold a chamber thermistor", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "jgehrig/v0_lcdskirt", "title": "V0 LCD Touchscreen Skirt", "creator": "jgehrig", "description": "3.2\" LCD Touch Screen Skirt", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "johanncc/Raspberry_Pi_Camera_Mount", "title": "Raspberry Pi Camera Mount", "creator": "johanncc", "description": "Low profile raspberry pi camera mount", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "joposter/v0_clippable_ledmounts", "title": "V0 Clippable LED Caselight", "creator": "joposter", "description": "LED Case light for the V0 that clips into the extrusions", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "kageurufu/mgn12-euclid", "title": "Euclid Probe Carriage", "creator": "kageurufu", "description": "A MGN-12 carriage with an inset mount for a Euclid Probe", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "khay/V2-200_4020_Electronics_Fan", "title": "Fan for V2-200mm\u00b2", "creator": "khay", "description": "Middle Skirt for V2-200mm\u00b2 Electronics Compartment", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "khay/V2_3x_Keystone_Plugpanel", "title": "3x Keystone PlugPanel", "creator": "khay", "description": "PlugPanel with Options for 3 Keystones", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "khay/micro_backplate", "title": "V0 Micro Backplate", "creator": "khay", "description": "Minimalistic backplate for cooler motors and electronics", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "kirby/v0_sherpa_mini_direct_drive", "title": "V0 Sherpa Mini Direct Drive Mod", "creator": "kirby", "description": "A direct drive mod for the V0 using the Annex Sherpa Mini extruder", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "lakai/Bruag_Skirts", "title": "Bruag Skirts", "creator": "lakai", "description": "V2 350mm skirts inspired by Bruag Facades", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "leandromarceddu/PowerSkirt", "title": "PowerSkirt", "creator": "leandromarceddu", "description": "Modified skirtpiece for a digital power monitor", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "littleferris/V0_Skirt_Inlet", "title": "V0 c14 Skirt Inlet", "creator": "littleferris", "description": "V0 C14 Skirt inlet", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "madfabrications/Vertical_PSU_Mount", "title": "Vertical PSU Mount", "creator": "madfabrications", "description": "Mounts the PSU vertically on the DIN rails", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "madros/V0_skirt_OLED", "title": "V0 OLED-skirt", "creator": "madros", "description": "V0 skirt with 0.96\" OLED", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "maximilian-foerg/AB_Turbo_Mod", "title": "Afterburner Turbo Mod", "creator": "maximilian-foerg", "description": "A purely cosmetic mod for Afterburner", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "maximilian-foerg/VSW_Double_60mm_Fan_Mount", "title": "Switchwire Double 60mm Fan Mount", "creator": "maximilian-foerg", "description": "A mount for two (or four) 60mm fans in SW's electronics compartment", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "mikepthomas/MKS_Mosfet_Mount", "title": "MKS Mosfet Mount", "creator": "mikepthomas", "description": "MKS Mosfet Mount based of the Trident Raspberry Pi Mount.", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "mjoaris/10x11_Cable_Chain_Endcaps", "title": "10x11 Cable Chain Endcaps", "creator": "mjoaris", "description": "Printable Endcaps for 10x11 Cable Chains", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "mjoaris/Mini12864_LCD_Mount_for_V2.4", "title": "Mini12864 LCD Mount", "creator": "mjoaris", "description": "Swiveling case for the Fysetc Mini12864 LCD", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "mosher/m3_door_hinges", "title": "Door hinges with M3 screws shafts", "creator": "mosher", "description": "Simple mod of print in place door hinges, which uses m3 screws as...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "mpfl/V0.1_skirt_OLED", "title": "V0.1 OLED-skirt", "creator": "mpfl", "description": "V0.1 skirt with 0.96\" OLED", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "muradir/Zodiac_BMO_Stealthburner_Toolhead", "title": "Zodiac BMO Stealthburner Toolhead", "creator": "muradir", "description": "A Stealthburner toolhead for the Zodiac BMO Hotend, based on the...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "natewalck/v1.8_Jigs", "title": "V1.8 Jigs", "creator": "natewalck", "description": "Jigs for assembling V1.8", "printer_compatibility": "V1.8", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "nhchiu/V0.1_Movable_Pulley_Z", "title": "V0.1 Movable Pulley Z Drive", "creator": "nhchiu", "description": "A movable pulley system on the Z axis with 1:8 total speed ratio...", "printer_compatibility": "V0.1", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "nikolasbabetas/Neopixel_Holder", "title": "Neopixel Holder", "creator": "nikolasbabetas", "description": "A holder to attach Neopixel/WS2812B Led Strips to the V0.1", "printer_compatibility": "V0.1", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "ommy/roller_brackets", "title": "roller brackets", "creator": "ommy", "description": "Brackets to help rolling V2 on its side.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "oxno/rbp_zero_braket", "title": "RBP Zero Bracket", "creator": "oxno", "description": "Bracket for Raspberry pi zero.", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "padok/chain_anchor-ADXL345_mount", "title": "Chain Anchor - ADXL345 mount Mod", "creator": "padok", "description": "A ADXL345 mount for the Afterburner", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "piet206/V1.8._Z_Rails_Mod", "title": "V1.8 Z Rails Mod", "creator": "piet206", "description": "Add MGN12H linear rails for Z axis motion", "printer_compatibility": "V1.8", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "prasadp4009/SW_SB_CRTouch", "title": "StealthBurner CR Touch Mod", "creator": "prasadp4009", "description": "Voron SW StealthBurner CR Touch Mod", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "quattroerik/front_door_m3_180_deg_3mm", "title": "V2.4 Door Hinge M3 3mm 180deg", "creator": "quattroerik", "description": "Voron 2.4 door hinges for 3mm panel, 180 deg opening and m3 screw...", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "randell/Door_Hinges", "title": "Door Hinges", "creator": "randell", "description": "Door hinges that use an M3 bolt for a pin and bolts thru the panel", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "randell/Microswitch_Endstop", "title": "Microswitch Pod for PCB", "creator": "randell", "description": "Modified endstop pod for use of endstop switches mounted on a PCB", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "raymondh/LargeSpoolHolders", "title": "Large Spool Holders", "creator": "raymondh", "description": "Larger spool holders for KVP spools", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "reQu1em00/Kirigami_LED_Bed_Front", "title": "Kirigami LED Bed Front", "creator": "reQu1em00", "description": "Kirigami bed front with space for a single LED or Neopixel button", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "reapola/MKS_CANable_Pro_mount", "title": "MKS CANable Pro DIN Mount", "creator": "reapola", "description": "MKS CANable Pro mount which mounts on a DIN rail", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "revnull/rpi_7in_display_mount", "title": "Raspberry Pi 7inch Display Mount", "creator": "revnull", "description": "An articulating mount for the offical Raspberry Pi 7inch touch screen", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "richardjm/adxl-chain", "title": "ADXL drag chain mount", "creator": "richardjm", "description": "Permanent mount for ADXL boards on the back of the motor, replacing...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "richardjm/back-plate", "title": "Back blanking plate", "creator": "richardjm", "description": "Back blanking plate that can be used instead of the exhaust filter...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "richardjm/led-mounts", "title": "LED 15.5mm quarter round mounts", "creator": "richardjm", "description": "Mounting corners with integrated cable runs for 15.5mm quarter...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "richardjm/picam-corner", "title": "Picam corner mount", "creator": "richardjm", "description": "Out of the way corner mounted picam", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "richardjm/snap-latch-2020", "title": "Printable snap latches for 2020...", "creator": "richardjm", "description": "Quick release panel latch inspired by the work of others.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "rngSplat/SW_Deck_Plate", "title": "Printable Switchwire Deck Plate", "creator": "rngSplat", "description": "Print a deck plate for Switchwire with debossed Voron logo", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "roboticator24/4inch_touchscreen_mount_for_v2.4", "title": "Touchscreen for OctoDash", "creator": "roboticator24", "description": "Mount a 4-inch LCD touchscreen to your V2.4 in place of the usual...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "rsheng118/BTT_octopus_DIN_vertical_mount", "title": "BTT octopus DIN vertical mount", "creator": "rsheng118", "description": "DIN vertical mount for Big Tech Tree Octopus board", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "ryandam/Cable_management_duct", "title": "Cable Management Duct", "creator": "ryandam", "description": "Zip tie mount intergrated cable duct to hide your cable", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "sammynorway/LGX-stealthburner-connector-cover", "title": "LGX stealthburner connector cover", "creator": "sammynorway", "description": "Cable cover for LGX and stealthburner", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "samwiseg0/4channel_relay_under_deck_mount", "title": "4 Channel Relay Under Deck Mount", "creator": "samwiseg0", "description": "Mod to mount a 4 channel GPIO controlled relay", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "samwiseg0/ab_plug_microfit_1x4", "title": "AB Plug (Microfit 1x4)", "creator": "samwiseg0", "description": "Mod to mount A & B motor connectors to the gantry", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "samwiseg0/corner_cable_hide", "title": "Corner Cable Hide/Cover (LED Wires)", "creator": "samwiseg0", "description": "Mod to hide cables around z idlers", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "samwiseg0/esp8266_nodemcu_din_mount", "title": "ESP8266 NodeMCU Din Mount", "creator": "samwiseg0", "description": "Din mount for ESP8266 NodeMCU", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "samwiseg0/extrusion_thermistor_mount", "title": "Extrusion/Chamber Thermistor Mount", "creator": "samwiseg0", "description": "Extrusion mount for a NTC100K Thermistor extrusion", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "samwiseg0/lrs_screw_terminal_cover", "title": "LRS PSU Screw Terminal Cover", "creator": "samwiseg0", "description": "Mod to cover the screw terminals for several LRS style PSUs", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "samwiseg0/microfit_2x3_skirt_connector_adxl", "title": "Microfit 2x3 Skirt Connector (ADXL)", "creator": "samwiseg0", "description": "Mod for a Microfit 2x3 connector to be mounted in a skirt", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "samwiseg0/voyager_gtx_din_mount", "title": "Corsair Flash Voyager GTX Din Mount", "creator": "samwiseg0", "description": "Din carrier for a Corsair Flash Voyager GTX", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "scanlory/clip_on_door_frame", "title": "Clip-On Front Door Frame", "creator": "scanlory", "description": "Clip-on frame to stiffen and seal front door panels when using...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "slitte/PCB_Probe", "title": "PCB_Probe", "creator": "slitte", "description": "PCB for BAT85 and pull up resistor", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "slitte/ssd_bracket", "title": "ssd_bracket", "creator": "slitte", "description": "bracket for mounting a 2.5\" ssd to a din rail", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "sloscotty/SW_Wall_Plate", "title": "Switchwire Wall Plate", "creator": "sloscotty", "description": "SW plate for enclosure", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "sloscotty/TopHat_Cam_Extension", "title": "NoNutz TopHat Cam Extension", "creator": "sloscotty", "description": "Tophat extension with integrated webcam for V0/0.1", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "spacelab2021/Orbiter-Clockwork", "title": "Orbiter Clockwork Mount", "creator": "spacelab2021", "description": "A clockwork adaptor for the Orbiter v1.5 Extruder with full...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "sse018/Octopus_DIN_Rail_bracket", "title": "Octopus DIN Rail bracket", "creator": "sse018", "description": "A Din rail mount for BTT Octopus board", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "strayr/stealthburner_creality_toolhead", "title": "Creality toolhead for stealthburner", "creator": "strayr", "description": "Use a creality ender 3 style hotend with stealthburner", "printer_compatibility": "V1.8, V2.4, VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "sttts/Waveshare-5.5-inch-HDMI-AMOLED", "title": "Waveshare 5.5inch HDMI AMOLED Mount", "creator": "sttts", "description": "Mod to mount a Waveshare 5.5inch full HD display on a V2", "printer_compatibility": "V2.4, VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "tallman5/z-locks", "title": "Z Locks", "creator": "tallman5", "description": "Helping hands curing v2.4 build, replaces long zip ties.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "tameike/DIN_Rail_2020_holder", "title": "Din Rail 2020 Holder", "creator": "tameike", "description": "Attaching DIN Rails to 2020", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "tameike/DIN_Rail_SKR_1.3_90deg", "title": "Din Rail SKR 90 deg", "creator": "tameike", "description": "SKR V1.3 bracket turned 90 degrees", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "tameike/Jetpack_V0", "title": "Jetpack V0 base", "creator": "tameike", "description": "Attach Jetpack to V0 frame", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "tameike/V0_TR_Mounting_Frame", "title": "TacoRaven Mounting Frame", "creator": "tameike", "description": "TR V0 mount", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "tayto-chip/skirt_switch_mod", "title": "V2.4 Skirt Switch Mod", "creator": "tayto-chip", "description": "Add a ON/OFF Switch to side or front skirts", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "teookie/AB_dial_indicator_mount", "title": "AB dial indicator mount", "creator": "teookie", "description": "Mount for attaching standard dial indicators to AB", "printer_compatibility": "V1.8, V2.4, VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "teookie/skr_brace", "title": "SKR Brace", "creator": "teookie", "description": "Rigidize and stabilize SKR 1.4 mounts", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "th0mpy/beefy-din", "title": "BEEFY Din Clips", "creator": "th0mpy", "description": "Two piece BEEFY Din Clips, holds stronger", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "togi/exhaust_housing_side_fitting", "title": "Exhaust housing side fitting", "creator": "togi", "description": "Moves the exhaust housing bowden fitting 90 degrees to allow the...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "top_gun_de/mount_for_umbilical", "title": "mount_for_umbilical", "creator": "top_gun_de", "description": "Umbilical guide that goes on the chain anchor", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "warriorofwire/slenderfan", "title": "Slenderfan for Afterburner", "creator": "warriorofwire", "description": "Lighter, quieter, smaller Afterburner", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "whoppingpochard/extrusion_backers", "title": "Extrusion Backers", "creator": "whoppingpochard", "description": "Laser-cut metal pieces to counteract bimetallic frame warping", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "wile-e1/Deck_Panel_Support_Clips", "title": "Deck Panel Support Clips", "creator": "wile-e1", "description": "Clips to help support lower deck panels to prevent (or fix) warping:", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "wile-e1/Stealthburner_CW1_PCB_Cover", "title": "Stealthburner + CW1 + PCB Cover", "creator": "wile-e1", "description": "Low-poly for Stealthburner + CW1 + PCB installations:", "printer_compatibility": "V1.8, V2.4, VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "wrez/astrodyne-inlet", "title": "V0 Alternate IEC 320 C14 Power...", "creator": "wrez", "description": "Drop in replacement for alternate-source power inlet if spec inlet...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xbst_/ADXL345_V0_Mount", "title": "ADXL345 V0 Mount", "creator": "xbst_", "description": "V0 Mount for a ADXL345 module", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xbst_/Bed_Hinge", "title": "Car Hood Style Bed Hinge", "creator": "xbst_", "description": "A way of reaching electronics from the top by having a \"car hood\"...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xbst_/Duct_Mount", "title": "Duct Mount", "creator": "xbst_", "description": "100mm/4\" ducting mount for ventilation. Also supports umbilical...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xbst_/DuetZero", "title": "DuetZero", "creator": "xbst_", "description": "Pi Zero mount over a Duet2 for space saving", "printer_compatibility": "V0.2, V1.8, V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xbst_/Easy_Access_Rear_Panels_v0", "title": "Easy Access Rear Panels", "creator": "xbst_", "description": "New rear panels designed to expose the extruder for easy filament...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xbst_/Flat_Skirts", "title": "Flat V2.4 Skirts", "creator": "xbst_", "description": "Flat V2.4 Skirts so a panel without cutouts can be used", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xbst_/HOYMK_SSR_Mount", "title": "HOYMK SSR Mount", "creator": "xbst_", "description": "Mount for Chinese HOYMK SSR", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xbst_/Hat_LED_Mount", "title": "Hat LED Mount", "creator": "xbst_", "description": "Top Hat LED module mount", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xbst_/LED_Holder", "title": "PCB LED Holder", "creator": "xbst_", "description": "Very simple mount for some (?) PCB LED Bars", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xbst_/Max31865_DIN_Mount", "title": "DIN Mount Max31865", "creator": "xbst_", "description": "A simple DIN rail mount for the Adafruit (or SAME SIZE clone)...", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xbst_/Omron_DIN_Mount", "title": "DIN Mount Omron Relay", "creator": "xbst_", "description": "A simple DIN rail mount for the BOM Relay", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xbst_/Relay_DIN_Mount", "title": "DIN Mount Pi 4x Relay Board", "creator": "xbst_", "description": "A simple DIN rail mount for the 4 channel relay board for Raspberry Pi", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xbst_/V0_Electronic_Panel", "title": "V0 Electronics Cover", "creator": "xbst_", "description": "A printed cover for v0 electronics. Requires larger printer to print.", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xbst_/V0_M4_Mod", "title": "Mobius 4 (M4) V0 Mod", "creator": "xbst_", "description": "Mod to mount a M4 extruder to a Voron 0 where pocketwatch extruder...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xbst_/V0_Picam", "title": "V0 PiCam Mount", "creator": "xbst_", "description": "A Raspberry Pi Camera Mount For V0", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xbst_/V0_Screw_Front_Hinge_Mod", "title": "Screwed Front Door Hinge", "creator": "xbst_", "description": "Mod to screw the front door panel (instead of VHB)", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xbst_/V0_Skirt_Buttons", "title": "V0 Buttons & OLED Mount", "creator": "xbst_", "description": "Mod to mount custom Gcode macro buttons & Waveshare 1.3\" OLED display", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xbst_/V2.4_Fanless_Middle_Skirt", "title": "V2.4 Fanless Middle Skirt", "creator": "xbst_", "description": "A Fanless alternative middle side skirt", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xbst_/V2.4_Skirt_Buttons", "title": "V2.4 Skirt Buttons", "creator": "xbst_", "description": "Skirt mod for custom Gcode macro buttons", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xbst_/ZipClip_v0", "title": "ZipClip V0", "creator": "xbst_", "description": "Very simple ziptie mount for v0 1515 extrusions", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "xceled/Single_Panel_Magnet_Mount", "title": "Single Panel Magnet Mount", "creator": "xceled", "description": "Mount your front panel using only magnets", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "yenda/vsw_more_robust_belt_paths", "title": "SW More Robust XZ Belt Paths", "creator": "yenda", "description": "Small mods to belt routing components to ensure a better/more...", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "yeri/V0_Magnetic_Panels", "title": "V0 Magnetic Panels", "creator": "yeri", "description": "Mount V0 panels with magnets, removes need for hinges and lets you...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "yeri/V1_3Z", "title": "V1 3Z", "creator": "yeri", "description": "3Z mod for V1", "printer_compatibility": "V1.8", "last_changed": "2023-08-23 23:08:13 +0000"}, {"path": "zruncho/V0_No_Drop_Nuts", "title": "V0 No-Drop Nuts", "creator": "zruncho", "description": "Voron0 nut inserts which auto-align (LDO frames only)", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:08:13 +0000"}]
\ No newline at end of file
+[{"path": "1-0-R/handle", "title": "V2.4 handle", "creator": "1-0-R", "description": "Handle for Voron 2.4", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "120decibell/exhaust_housing_side_entry", "title": "Side entry exhaust housing", "creator": "120decibell", "description": "Exhaust housing with dual cover screws and single or dual side...", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "120decibell/huvud_chain_mount", "title": "Huvud Chain Mount", "creator": "120decibell", "description": "Huvud rear mount for Clockwork or LGX that supports a cable chain.", "printer_compatibility": "V1.8, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "3dpandme/Fannypack_zero", "title": "FANnypack zero", "creator": "3dpandme", "description": "Electronics cooling solution for Voron Zero", "printer_compatibility": "V0.2, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "3dpandme/Thermistor_holder_zero", "title": "Thermistor holder zero", "creator": "3dpandme", "description": "Extended thermistor holder for Voron Zero", "printer_compatibility": "V0.2, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "3vilson/V0.1_Skirt_Holes", "title": "V0.1_Skirt_Holes", "creator": "3vilson", "description": "Skirt with Access Holes from the bottom", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "3vilson/V0.1_Skirt_Inlet", "title": "V0.1_Skirt_Inlet", "creator": "3vilson", "description": "Skirt with C14 inlet + New feet to screw into", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "42bios/LED_mount", "title": "LED mount", "creator": "42bios", "description": "AngryLED - LED-mount for Lumentech LT3 profiles.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "42bios/corner_panel_clip_cable", "title": "Corner panel clip w. cable", "creator": "42bios", "description": "Corner panel clip with an internal cable path.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "42bios/exhaust_filter_housing_side", "title": "Exhaust filter housing - side...", "creator": "42bios", "description": "Exhaust filter housing with the G1-8 \"thread on the side.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "42bios/relay_mount", "title": "relay mount", "creator": "42bios", "description": "relay-mount for 2x 2 channel relay modules.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Akio/cable_routing_z_belt_cover", "title": "Hidden cable routing z belt cover", "creator": "Akio", "description": "Z belt covers that allow hidden cable routing.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "AlexanderT-Moss/270-Clamping-Hinges", "title": "270 Clamping Hinges", "creator": "AlexanderT-Moss", "description": "Simple 270 degree hinges that clamp to the front panels instead of...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Andre/Mini_Afterburner_ADXL345_Mount", "title": "Mini Afterburner ADXL345 Mount", "creator": "Andre", "description": "Mount for an AXDL345 on the Mini Afterburner", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Andre/Mini_Afterburner_Strain_Relief", "title": "Mini Afterburner Strain Relief", "creator": "Andre", "description": "A replacement strain relief for the Mini Afterburner toolhead", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Andre/Revo_Nozzle_Skirt_Trident", "title": "Revo Nozzle Skirt", "creator": "Andre", "description": "A Revo nozzle box hidden in a Trident skirt.", "printer_compatibility": "VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Andre/V0_Neopixel_Front_Bed_Mount", "title": "V0 Neopixel Front Bed Mount", "creator": "Andre", "description": "A replacement Front Bed Mount with room for a neopixel or dotstar...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Backenfutter/Mount_for_Electreeks_Camera", "title": "Mount for Electreeks Camera", "creator": "Backenfutter", "description": "This Mod is a simple \"One Piece\" mount for the popular Electreeks...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Badnoob/AB-BN", "title": "AB-BN Afterburner mod (5015)", "creator": "Badnoob", "description": "Improved Afterburner with 5015 fan", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Badnoob/ABBN_for_Stock", "title": "AB-BN for Stock Afterburner (4020)", "creator": "Badnoob", "description": "Improved Dragon and Rapido toolhead for stock Afterburner with 4020...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Badnoob/Precision_AB_Drive", "title": "Precision AB Drive", "creator": "Badnoob", "description": "Changes the gearing for the AB drives to improve both resolution...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Badnoob/Rail_Alignment", "title": "Rail Alignment", "creator": "Badnoob", "description": "Tools and procedure to properly align the rails in 2.4 and Afterburner", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Baltojikale/LoudOwl_aka_Stabby", "title": "LoudOwl aka Stabby", "creator": "Baltojikale", "description": "Alternative dual 5015 part cooling fan toolhead for Afterburner", "printer_compatibility": "V1.8, V2.4, VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "BladeScraper-Designs/CornerPanel_SpoolHolder", "title": "CornerPanel_SpoolHolder", "creator": "BladeScraper-Designs", "description": "A better supported Spool Holder that mounts to a modified corner...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "BladeScraper-Designs/Horizontal-Spool-Holder", "title": "Horizontal Spool Holder", "creator": "BladeScraper-Designs", "description": "Based on the stock holder but mounts to the horizontal extrusions.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "BladeScraper-Designs/Microswitch_Pod_With_Conector", "title": "Microswitch Pod With Connector", "creator": "BladeScraper-Designs", "description": "Microswitch pod with JST-XH 4-pin connector", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Blamm/lrs-100", "title": "LRS-100 DIN mount", "creator": "Blamm", "description": "DIN rail mount for an extra LRS-100 Power Supply", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "BlueBear/Bowden_Fence", "title": "Bowden Fence", "creator": "BlueBear", "description": "A little \"fence\" to hold the tubes away from the belts.", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "BlueBear/Deck_Panel_Backpack", "title": "Deck Panel Backpack", "creator": "BlueBear", "description": "A mounting alternative if you don't want to drill your deck panel", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "BlueBear/Wago_221_mount", "title": "Clippable Wago 221 Mounts", "creator": "BlueBear", "description": "Mounts for Wago 221 to screw or clip-in on 1515 extrusions", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "BlueBear/Ziptie_Mount", "title": "Ziptie Mount", "creator": "BlueBear", "description": "Clippable Ziptie hooks for 1515 extrusions", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Boingomw/Wago_mount", "title": "Wago mount", "creator": "Boingomw", "description": "Smaller 5 port Wago mount that fits parallel to the support rails", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Bondtech/Mini-After-LGX-Lite", "title": "Mini-After-LGX-Lite", "creator": "Bondtech", "description": "LGX Lite Toolhead Setup For Voron V0.1.", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "ByteChild/2_Channel_Relay_DIN_Rail_Bracket", "title": "2-Channel Relay DIN Rail Bracket", "creator": "ByteChild", "description": "DIN Rail mounting bracket for an 2-Channel-Relay", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "ByteChild/ESP32_DIN_Rail_Bracket", "title": "ESP32 DIN Rail Bracket", "creator": "ByteChild", "description": "DIN rail mounting bracket for an ESP32", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "CannedBass/PITFT50_45_degree_mount", "title": "PITFT50 45-degree mount", "creator": "CannedBass", "description": "Mount that puts the screen at a 45-degree angle for more vertical...", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "CannedBass/Trident_Bed_Fans", "title": "Trident Bed Fans", "creator": "CannedBass", "description": "Bed fans for Trident", "printer_compatibility": "VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Ch4rlesB/V0_Handles_Slim", "title": "V0 Handles Slim", "creator": "Ch4rlesB", "description": "Simple and slim handles for the V0", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Chaoticlab/Tool_free_tensioner", "title": "Tool_free_tensioner", "creator": "Chaoticlab", "description": "Tool-free tensioner for Z-Axis", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "ChenTheDesignMaker/Z_Belt_Clip", "title": "Z Belt Clip", "creator": "ChenTheDesignMaker", "description": "Simple clip to keep extra Z belts clean and away from panels", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "D4rkCelerity/Raspberry_Pi_Zero_Bracket", "title": "Raspberry Pi Zero Bracket", "creator": "D4rkCelerity", "description": "Modified version of Trident RPi bracket to fit the smaller RPi Zero", "printer_compatibility": "V0.2, V1.8, V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "DC67/plug_panel_schaffner", "title": "Plug Panel Mod for Schaffner...", "creator": "DC67", "description": "A modified plug panel for the Power Entry Connector Schaffner...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "DaGlo/Voron_V0_Duet_2_WiFi_Mounting_Brackets", "title": "V0.1 Duet 2 Wifi mounting brackets", "creator": "DaGlo", "description": "Voron 0.1 Mounting brackets with/without RPi 4", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "DaGlo/Voron_V0_MW_PS_Bracket", "title": "Voron V0 Mean Well power supply...", "creator": "DaGlo", "description": "Voron V0 Mean Well power supply bracket (Funssor Kit)", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "DaGlo/Voron_V0_SSR_Mount", "title": "Voron V0 SSR Mount", "creator": "DaGlo", "description": "Voron V0 SSR Mount for the bottom", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "DaGrooch13/Tophat_Exhaust_Filter", "title": "Tophat Exhaust Filter V0", "creator": "DaGrooch13", "description": "Activated charcoal exhaust filter with HEPA that replaces the rear...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "DaStivi/the_Cephalopods_limb", "title": "The Cephalopod limb (BTT Octopus...", "creator": "DaStivi", "description": "An alternative Din rail mount for BTT Octopus (PRO) boards", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Dan88/V0skirt", "title": "V0 one-part Skirts", "creator": "Dan88", "description": "One part Skirts for the V0", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Daten/Voron_2.4_Revo_Nozzle_Holder", "title": "Revo hotend skirt case", "creator": "Daten", "description": "A skirt case for the Revo hotends to reside R1 and R2", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "DerekBackus/LED_Holder", "title": "LED Strip Holder", "creator": "DerekBackus", "description": "Simple bracket to mount an LED strip", "printer_compatibility": "", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "DerekBackus/Right_Skirt_Switch", "title": "Trident Right Skirt Switch", "creator": "DerekBackus", "description": "Moves power switch to right front skirt on the Trident", "printer_compatibility": "", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Derpimus/Block_handle_v0.1", "title": "V0.1 Block Handle", "creator": "Derpimus", "description": "V0.1 Block Style Handle", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "DorjeDorf/Duet_3_3HC_Din_Bracket", "title": "Duet 3 3HC Din Bracket", "creator": "DorjeDorf", "description": "V2.4 Duet 3 3HC Din Bracket", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "DorjeDorf/Duet_3_6HC_Din_Bracket", "title": "Duet 3 6HC Din Bracket", "creator": "DorjeDorf", "description": "V2.4 Duet 3 6HC Din Bracket", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Dr-Info/V2.4r2_Z-Drive_Motor_Tensioner_Mod_Rear_Skirts", "title": "V2.4 Rear Skirt Mod for Z-Drive...", "creator": "Dr-Info", "description": "This mod enables the you to utilize the rear skirts, power and...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Dr-Info/corner_cable_cover_with_drop_down_holes", "title": "Corner Cable Cover with Drop Holes", "creator": "Dr-Info", "description": "Corner cable cover around Z-idler with drop holes near z frame and...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "DrGhetto/GhettoPanels", "title": "Ghetto Panels", "creator": "DrGhetto", "description": "Printed panels for the Voron Zero", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "ElPoPo/RemovableDoors", "title": "Removable Doors", "creator": "ElPoPo", "description": "New hinge to easily remove the door and have a wide opening V2.x", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Electroleon/U2C_Mounting", "title": "U2C Mounting", "creator": "Electroleon", "description": "Bigtreetech U2C CAN Interface mounting bracket", "printer_compatibility": "V0.2, V1.8, V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Ellis/15x15_Drag_Chain_End", "title": "15x15 Drag Chain End", "creator": "Ellis", "description": "15x15 drag chain end piece", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Ellis/Badge_Retractor_Mount", "title": "Badge Retractor Mount", "creator": "Ellis", "description": "Extrusion mount for badge retractor to keep bowden tube out of the...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Ellis/Bed_Fans", "title": "Bed Fans", "creator": "Ellis", "description": "Bed fan control macros and 5015 bed fan mounts", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Ellis/Short_Z_Joints", "title": "Short Z Joints", "creator": "Ellis", "description": "Shorter Z joints for the v2.4", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Ellis/Single_MGN9H_Carriage", "title": "Single MGN9H Carriage", "creator": "Ellis", "description": "Single MGN9H toolhead carriage with toolhead x endstop support (for...", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Empusas/BTT_Filament_Motion_Sensor_Mount", "title": "Mounts for BTT Filament Motion...", "creator": "Empusas", "description": "Mounts for Big Tree Tech Smart Filament Motion Sensor", "printer_compatibility": "V0.2, V1.8, V2.4, VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Empusas/PowerSkirt_FN284-10-06", "title": "Power Skirt 2.x FN284-10-06", "creator": "Empusas", "description": "Power Skirt for Schaffner FN284-10-06 V2.x", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Empusas/Terminal_Blocks_NC933_SPL-62", "title": "Mounts for Terminal Blocks NC933...", "creator": "Empusas", "description": "Mounts for Terminal Blocks NC933 and SPL-62 from AliExpress", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Fiction/C270_mount", "title": "C270 mount", "creator": "Fiction", "description": "Logitech C270 webcam front-centre mount", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Fiction/Crossrail", "title": "Crossrail", "creator": "Fiction", "description": "Across-the-rails LRS-200-24 or RSP-200-24 mount using DRP-03 brackets", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Fiction/Exhaust_cover", "title": "Exhaust_cover", "creator": "Fiction", "description": "Cover for exhaust cutout in back panel", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Fiction/Exhaust_cover_SFS", "title": "Exhaust_cover_SFS", "creator": "Fiction", "description": "Exhaust cover and BTT Smart Filament Sensor mount", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Fiction/LGX_Lite_toolhead_PCB_mount", "title": "LGX Lite toolhead PCB mount", "creator": "Fiction", "description": "Mount for Hartk's toolhead PCB(s) for LGX Lite", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "FreeformFez/FilteredPower", "title": "V1.8 Filtered Power Inlet", "creator": "FreeformFez", "description": "V1.6 Filtered Inlet and Rocker Switch for V1.8", "printer_compatibility": "V1.8", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "GSL12/pocketwatch_nema17", "title": "Pocketwatch Nema 17", "creator": "GSL12", "description": "Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe...", "printer_compatibility": "", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "GadgetAngel/Bed_Support_Alignment_Tools", "title": "Bed Support Extrusions Alignment...", "creator": "GadgetAngel", "description": "The bed support alignment tools will assist in helping align the...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "GadgetAngel/Cricut_Voron_Logos", "title": "Cricut Voron Logos", "creator": "GadgetAngel", "description": "For any cutting machines or machines that rely on vector graphics...", "printer_compatibility": "V0.2, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Galvanic/Bowden_Tube_Guide", "title": "Bowden Tube Guide", "creator": "Galvanic", "description": "Bowden tube guide and CANBUS wire support", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "GiulianoM/FlyF407ZG", "title": "Fly F407ZG Mount", "creator": "GiulianoM", "description": "Mount for the Fly F407ZG: https://github.com/FLYmaker/FLYF407ZG", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Gizzle/ender-3_pro_switchwire", "title": "Ender 3 and Ender 3 Pro...", "creator": "Gizzle", "description": "Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics...", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Hobson318/Belt_Tension_Wrench", "title": "Belt Tension Wrench", "creator": "Hobson318", "description": "Wrench for easier turning of the belt tension knobs on V0.1", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Hobson318/Klipper_Expander_Mount", "title": "Klipper Expander Mount", "creator": "Hobson318", "description": "Mounting brackets for the klipper expander using vhb tape or...", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Iakabos/C920_mount", "title": "c920 Mount", "creator": "Iakabos", "description": "Slim mount for logitech c920 webcam", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Iakabos/V0_beltchain", "title": "V0 beltchains", "creator": "Iakabos", "description": "Modified beltchain parts for V0 Z cables", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "JD/RefillPlease", "title": "V2.4 Filament runout sensor", "creator": "JD", "description": "Replace the 2.4 stock bowden tube holder and add a filament runout...", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "JJFX/CRTouch_Snap_Mount", "title": "V2.4 CR Touch Snap Mount", "creator": "JJFX", "description": "Mount to replace v2.4 (MGN9) probe with a Creality CR Touch", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "JNP/Back-Door", "title": "Back Door", "creator": "JNP", "description": "Door for easy hardware access", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "JNP/Deck_Panel_Rear", "title": "Deck Panel", "creator": "JNP", "description": "Covers the hotbed cables", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "JNP/Drawer", "title": "Drawer", "creator": "JNP", "description": "Drawer in four different versions", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "JNP/Front-Door", "title": "Front Door", "creator": "JNP", "description": "Door in a frame", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "JNP/HEPA-Filter", "title": "Hepa Filter", "creator": "JNP", "description": "Filter case with fan\u00b4s", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "JNP/Mid-Panel", "title": "Mid Panel", "creator": "JNP", "description": "Panel for SKR1.4/1.4 or SKR E3 mini mount", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "JNP/Neopixel-Y_Rails", "title": "Neopixel Case", "creator": "JNP", "description": "mounting for Neopixel strip with 8 LED\u00b4s", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "JNP/Side-Panels", "title": "Side Panels", "creator": "JNP", "description": "Panels with intergrated hinge", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Jasrags/sw_fee_slot_filament_passthrough", "title": "Feed slot with filament pass-...", "creator": "Jasrags", "description": "A feed slot with a filament pass-through", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "JeremyRuhland/V2.4_Plug_Panel_Generic_Combo", "title": "V2.4 Plug Panel Generic Combo", "creator": "JeremyRuhland", "description": "Skirt power panel for generic amazon plug/switch/fuse combo module,...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Jon/1515_led_mount", "title": "1515 LED Mount", "creator": "Jon", "description": "Snap in 1515 Led mount for WS2812B", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Jon/V0.1_Z_Cover", "title": "Z Cover for v0.1", "creator": "Jon", "description": "A cover to stop things from dropping down the Z motor and...", "printer_compatibility": "V0.1", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Jon/adxl345_skirt_keystone", "title": "adxl345 skirt keystone", "creator": "Jon", "description": "Skirt keystone for ADXL345 using Microfit 3.0", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "JosAr/Klicky-Probe", "title": "Klicky Probe", "creator": "JosAr", "description": "Microswitch based inductive probe replacement", "printer_compatibility": "V0.2, V1.8, V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "KenadyDwag44/sw_lightbar", "title": "Switchwire Lightbar", "creator": "KenadyDwag44", "description": "A LED lightbar for switchwire", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "KevinAkaSam/VEFACH", "title": "VEFACH", "creator": "KevinAkaSam", "description": "Voron Exhaust Filter Inserts for Activated Coal + Hepa", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "KiloQubit/V0_reverse_bowden_mount", "title": "V0 Reverse Bowden Mount", "creator": "KiloQubit", "description": "V0 reverse bowden mount", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts", "title": "V2.4 Z Chain Mounts for 3 Hole...", "creator": "KiloQubit", "description": "Z chain mounts for 3 hole generic chain", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "KiloQubit/trident_schurter_power_inlet", "title": "Trident Schurter Inlet Skirt", "creator": "KiloQubit", "description": "Trident inlet skirt for mounting a Schurter DD11.0124 or similar inlet", "printer_compatibility": "VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Koios/6mm_Glass", "title": "6mm Tempered Glass Mod", "creator": "Koios", "description": "Lock levers and rests for 6mm Tempered glass panels", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Koios/C920_Mount", "title": "C920 Low Profile Mount", "creator": "Koios", "description": "Low profile mount for a C920 Webcam", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Koios/LED_Mounts", "title": "LED Bar Mounts", "creator": "Koios", "description": "Low profile mount for led bar lights", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Koios/V0_C920_Tophat_Mount", "title": "V0 C920 Tophat Mount", "creator": "Koios", "description": "Mounting bracket for a Logitech C920 on the tophat", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Kosh42EFG/kirigami_bed_front", "title": "Kirigami bed front", "creator": "Kosh42EFG", "description": "Printed bed front for kirigami folded metal bed mount with Voron logo.", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Kruppes/Closed_Bottom", "title": "Encosed Bottom", "creator": "Kruppes", "description": "Modified printed parts and panel to fully enclose V0.", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Kruppes/Deck_Panel_inserts_logo", "title": "V0 Printed Deck with inserts", "creator": "Kruppes", "description": "Electronics Deck Panel using brass heat inserts. Optional with...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Kruppes/Tension_Meter", "title": "Belt Tension Meter", "creator": "Kruppes", "description": "Print in place tension meter to easily tighten multiple belts to...", "printer_compatibility": "V0.2, V1.8, V2.4, VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Kyleisah/CableGator", "title": "CableGator Cable Comb", "creator": "Kyleisah", "description": "A cable comb for simplifying and tidying wire harnesses for...", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "LJ/Scrubby", "title": "Scrubby", "creator": "LJ", "description": "Easy to use filament dust filter", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Le0n/Magnetic_Panels_with_Magnet_Inserts", "title": "Magnetic panels with Magnet Inserts", "creator": "Le0n", "description": "Magnetic panel mounts with magnets inserted into frame slots.", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "LoCoCNC/3mm_tophat_panel_parts", "title": "3mm Top Hat Panels Clips", "creator": "LoCoCNC", "description": "Required to use the 3mm (1/8\") thick top hat panels for V0.1", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "LoCoCNC/MGN7H_Shims", "title": "MGN7H Shims", "creator": "LoCoCNC", "description": "Shims for making bearing cartridges coplanar", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "LoCoCNC/Mosquito_PTFE_Cutting_Jig", "title": "Mosquito PTFE 15mm Tube Cutting Jig", "creator": "LoCoCNC", "description": "Tool to precicely cut 15mm PTFE Tube", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "LoCoCNC/Strain_Relief_w_Microfit", "title": "Strain Relief w/ 10 Pin Microfit", "creator": "LoCoCNC", "description": "Strain Relief with 10 pin Microfit connector", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "LoCoCNC/ssr_strap", "title": "SSR Mounting Strap", "creator": "LoCoCNC", "description": "Mounting Strap for SSR on 1515 Extrusions", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "LoCoCNC/wire_grommets", "title": "V2.4 Bed Wiring Grommet", "creator": "LoCoCNC", "description": "Safely capture your bed wires thru the bottom panel", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "LoganFraser/ComboInlet", "title": "ComboInlet", "creator": "LoganFraser", "description": "Skirt pieces for Trident, 2.4 and 2.4r2 for combo inlets in 2 sizes.", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "LoganFraser/HorseshoeSpoolHolder", "title": "HorseshoeSpoolHolder", "creator": "LoganFraser", "description": "Horseshoe Spool Holder - mounts internally for Trident, or...", "printer_compatibility": "V0.2, V1.8, V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "LoganFraser/PiPlate", "title": "PiPlate", "creator": "LoganFraser", "description": "PiPlate - Raspberry Pi3,4 mounting plate and Skirt Mod for...", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "LoganFraser/TridentInvertedElectronics", "title": "Trident Inverted Electronics", "creator": "LoganFraser", "description": "Flip the Trident electronics bay for top access.", "printer_compatibility": "VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "LoganFraser/WagoMounts", "title": "WagoMounts", "creator": "LoganFraser", "description": "Wago Mounts for Din Rail or 2020 Extrusion mounting.", "printer_compatibility": "V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Long/Mantis_Dual_5015", "title": "Mantis Dual 5015 Toolhead", "creator": "Long", "description": "MGN12 Dual 5015 Toolhead for 2.4 & 1.8", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Lukas/SSD1306_Case_Front_Cover", "title": "SSD1306 Case Front Cover", "creator": "Lukas", "description": "SSD1306 Mount replacement for Mini12864", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "MCMBen/Voron0_Block_and_Tackle_Z_Belt", "title": "Voron0 Block & Tackle Z Belt", "creator": "MCMBen", "description": "A block & tackle belted Z solution using NEMA14. Ratios from 5:1 to...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "MSA/V0-Belt-tension-helper", "title": "Belt tension helper", "creator": "MSA", "description": "Belt tension helper for V0.1", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "MSiemons/TophatHingeV0.1", "title": "Tophat Hinge V0", "creator": "MSiemons", "description": "Simple hinge for V0 Tophat", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Mac10goesBRRRT/BTT_PiTFT", "title": "PiTFT Mount", "creator": "Mac10goesBRRRT", "description": "Mount for the BTT PiTFT Touchscreen", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Majarspeed/Hartk_Mount_Galileo", "title": "Hartk board mount galileo", "creator": "Majarspeed", "description": "It hangs stuff on your tool", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "MakeALeft/Switchwire_Front_Grill", "title": "Switchwire Clean Center Grill", "creator": "MakeALeft", "description": "Removed magnet holders on center panel for cleaner look", "printer_compatibility": "", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "MasturMynd/Stealth_Zero", "title": "Stealth Zero", "creator": "MasturMynd", "description": "A low poly gantry with front tensioners and optional front mounted...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "MathematicalPotato/v0.1_belted_z_drive", "title": "V0.1 Belted Z Drive", "creator": "MathematicalPotato", "description": "Conversion to a belted Z axis for the V0.1 adapted from...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Maverick/MiniSB_LGX_Lite", "title": "MiniSB_LGXL", "creator": "Maverick", "description": "A Bondtech LGX Lite variant of the MiniSB", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Maverick/MiniSB_Rapido", "title": "MiniSB_Rapido", "creator": "Maverick", "description": "Modified MiniSB to use a Rapido hotend", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Maverick/MiniSB_Sharkfin", "title": "MiniSB_Sharkfin", "creator": "Maverick", "description": "Modified MiniSB to use a Sharkfin Extruder", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Maverick/V0.2_Handles", "title": "V0.2 Handles", "creator": "Maverick", "description": "Add handles to the extrusion tophat", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Maverick/V0.2_Stealth_Skirts", "title": "V0.2 Stealth Skirts", "creator": "Maverick", "description": "Juiced up skirts for the V0.2", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Mckurt/Switchwire_Y_Belt_Tensioner", "title": "Switchwire Y Belt Tensioner", "creator": "Mckurt", "description": "Switchwie Y axis Belt Tensioner", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Mellow/V0_Fly-Gemini", "title": "V0 Fly-Gemini", "creator": "Mellow", "description": "Fly-Gemini adapted model for V0", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail", "title": "LGX mount for V0.1 with 2nd X rail", "creator": "MikesMods", "description": "V0.1 mod for mounting Bondtech LGX extruder with addition of 2nd X...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Minsekt/Rear_Umbilical", "title": "Rear Umbilical", "creator": "Minsekt", "description": "Rear Umbilical mounting solution including a relocated Y-Endstop", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "MrBean66/SKR_PRO_Mount", "title": "SKR Pro DIN Mount", "creator": "MrBean66", "description": "Simple mod to mount the SKR Pro board from BTT to a DIN rails.", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "MrDespair/MiniAB_Pinda", "title": "MiniAB Pinda Probe Mount", "creator": "MrDespair", "description": "Replacement MiniAB Cowling to add a mount for a Pinda style probe.", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Mrgl-Mrgl/LGX_Lite_Mount", "title": "LGX Lite Mount", "creator": "Mrgl-Mrgl", "description": "a mount for the LGX Lite", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Nashuar/V0_Dragon_ToolheadStockScrews", "title": "V0 Dragon Toolhead M2.5x8", "creator": "Nashuar", "description": "This toolhead uses the stock M2.5 screw that came with the dragon...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Nomsplease/60mm_Shaft_Jig", "title": "60mm Shaft Jig", "creator": "Nomsplease", "description": "Simple jig for cutting and grinding 60mm Z shafts", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Nomsplease/V0_Mods/duet_wifi_mount", "title": "Duet Wifi Mount", "creator": "Nomsplease", "description": "Duet wifi mount in pocketwatch location", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Nomsplease/V0_Mods/led_mounts", "title": "LED Mounts", "creator": "Nomsplease", "description": "Basic LED mounts for 10 and 12mm strips", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Nomsplease/V0_Mods/panel_mounts", "title": "Remixed Panel Mounts", "creator": "Nomsplease", "description": "Remixed rear bottom panel mounts with stop", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Nomsplease/V0_Mods/pi_zero_camera_mount", "title": "Pi Cam/ZeroW Mount", "creator": "Nomsplease", "description": "Mount for pi camera and ZeroW", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Nomsplease/V0_Mods/pocket_watch_rear_relocation", "title": "Pocket Watch Rear Reolcation...", "creator": "Nomsplease", "description": "Pocket watch rear reolcation bracket", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Oakman/BTT_24V_UPS_Metal_DIN_Mount", "title": "BTT 24V UPS Metal DIN Mount", "creator": "Oakman", "description": "Adapter to use a metal DIN mount for the BTT 24V UPS", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Oakman/FYSETC_Spider_Metal_DIN_Mount", "title": "FYSETC Spider Metal DIN Mount", "creator": "Oakman", "description": "Use a metal DIN mount for your FYSETC Spider", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Oakman/RPI_Metal_DIN_Mount", "title": "RPI Metal DIN Mount", "creator": "Oakman", "description": "Adapter for metal DIN mounting the Raspberry Pi", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "OboMaker3D/C17-EXT", "title": "C17-EXT Filter HEPA Carbon", "creator": "OboMaker3D", "description": "Replaces standard filter with new HEPA Crabon and 120mm fan V1.1", "printer_compatibility": "V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "OboMaker3D/C17-EXT-CARTRIDGE", "title": "C17-EXT-CARTRIDGE for C17-EXT...", "creator": "OboMaker3D", "description": "Alternative to a commercial cartridge for the C17-EXT filter", "printer_compatibility": "V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Phalanx/Other-V2-Idlers", "title": "\"Other\" Idlers Mod", "creator": "Phalanx", "description": "Allow usage of wider toolheads on the V2", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch", "title": "V0.1 Z nozzle endstop switch", "creator": "Polar-Ted", "description": "Sexbolt style switch for V0", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Polar-Ted/V0_Two_Piece_Back_Panel", "title": "V0.1 Two Piece Back Panel", "creator": "Polar-Ted", "description": "Vented 2 piece back panel for V0", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Polared/Power_Inlet_w_Keystone_Insert", "title": "Power Inlet with Keystone Insert", "creator": "Polared", "description": "Voron 0.1 Power inlet with keystone insert slot", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Printopal/Magnetic_top_panel", "title": "Magnetic top panel", "creator": "Printopal", "description": "Top panel with magnets allows for quick installation and removal", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "PsychoShaft/C92X_PsycHoShafts_Mount", "title": "C92X_PsycHoShafts_Mount", "creator": "PsychoShaft", "description": "2020 Top profile 920 camera mount / 2 point axis pivot", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "QuackProfit/V0-Adafruit-Y_Rails", "title": "V0 Adafruit NeoPixel LED Mounts", "creator": "QuackProfit", "description": "Mount Adafruit PCB NeoPixel Sticks on the V0 Y-rail extrusions", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Rhastlyn/60mmFanCover", "title": "60mm Fan Cover", "creator": "Rhastlyn", "description": "A easy to install cover for spec 60mm fans originally designed for...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Rhastlyn/WansviewCameraMount", "title": "Wansview 1080p Camera Mount", "creator": "Rhastlyn", "description": "A camera mount that replaces the OEM part to allow the camera to be...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "RockNLol/RockNRoll", "title": "RockNRoll", "creator": "RockNLol", "description": "Rockers to roll the printer on its back for easier access to the...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "ScramblerUSA/SideSkirtPowerSwitch", "title": "Side Skirt Power Switch", "creator": "ScramblerUSA", "description": "Skirt-mounted rocker switch for easy access for Voron 2.4", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "See1807/Voron_V0_Exhaust_and_LED_Mod", "title": "TopHat Exhaust and LED Light", "creator": "See1807", "description": "A mount for 10mm LED strips and Exhaust for Voron V0", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Shiftingtech/Trident_dual_power_switch", "title": "Trident Dual Power Switch", "creator": "Shiftingtech", "description": "A replacement skirt, allowing 2 power switches", "printer_compatibility": "VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "ShinyPants/Orange_Pi_3_LTS_DIN", "title": "OrangePi 3 LTS DIN Rail bracket", "creator": "ShinyPants", "description": "A DIN rail mount for OrangePi LTS 3", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Shteeeeeve/V01-LED-Tophat", "title": "V0.1 LED Tophat", "creator": "Shteeeeeve", "description": "V0.1 LED Tophat w/ 24V LED Lightstrip", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Slidr/PanzerBalls2.4", "title": "PanzerBalls 2.4", "creator": "Slidr", "description": "Squash Ball Feet for V2.4", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Slidr/PanzerChain2.4", "title": "PanzerChain 2.4", "creator": "Slidr", "description": "Energychain for V2.4", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Spaghetti-Bolognese/LCD_case_mod", "title": "LCD Case Mod", "creator": "Spaghetti-Bolognese", "description": "Improvements to the V2.4 mini12864 LCD case inc E-stop button cover", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Spaghetti-Bolognese/Z_drive_motor_mount", "title": "Simplified Z Drive Motor Mount", "creator": "Spaghetti-Bolognese", "description": "Z drive motor mount bracket mod to improve pulley to belt alignment", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "StvPtrsn/320mm_Build", "title": "Skirts for a 320mm Build", "creator": "StvPtrsn", "description": "Skirts for a 320mm build", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "StvPtrsn/Keystone_Jack_Filtered_Mains_Panel", "title": "Keystone Jack for Filtered Mains...", "creator": "StvPtrsn", "description": "Add a keystone jack to your filtered mains plug panel", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "StvPtrsn/Parts_Jigs_and_Mods", "title": "Parts_Jigs and Mods", "creator": "StvPtrsn", "description": "Parts, Jigs and modifications I use for my builds", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "StvPtrsn/Side_Fan_Support_No_Tape", "title": "Side Fan Support, No Tape", "creator": "StvPtrsn", "description": "Mount the 60mm side fans and inserts without tape", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Takuya/USBCameraMount", "title": "WANSVIEW USB Camera Mount", "creator": "Takuya", "description": "WANSVIEW 1080p Camera Mount for Voron 2.4", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "TheSquiffy/V0_Belts_holder", "title": "V0 Belts holder", "creator": "TheSquiffy", "description": "V0 Belts Holder", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "TiagoBarata/Logitech_C270_Mount", "title": "Logitech C270 Mount", "creator": "TiagoBarata", "description": "Logitech C270 Top Center Mount", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Tircown/DIN_mount_RS-15-5", "title": "DIN mount RS-15-5 PSU", "creator": "Tircown", "description": "A DIN mount for the RS-15-5", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Tircown/Display_mount_5inch", "title": "Display mount 5\"", "creator": "Tircown", "description": "Tiltable mount for a 5\" tactile display", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Tircown/Raspberry_plug_panel", "title": "Raspberry in plug panel", "creator": "Tircown", "description": "Raspberry mount vertically in the plug panel, allow easy access to...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Tircown/V01_skirt_buttons", "title": "V0.1 Skirt buttons", "creator": "Tircown", "description": "Buttons for V0.1 spec skirts", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Triano/Ender_3Pro_Switchwire", "title": "Ender 3 Pro or V2 to Switchwire Mod", "creator": "Triano", "description": "Convesion of an Ender 3 Pro or V2 to a Switchwire", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Ultrawaffles/Ender_3_to_SW", "title": "Ender 3 to SW conversion", "creator": "Ultrawaffles", "description": "A conversion mod for the ender 3 to switchwire. Designed to allow...", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "VinnyCordeiro/RGB_LED_grid_for_SB", "title": "RGB LED grid for Stealthburner", "creator": "VinnyCordeiro", "description": "A small RGB LED grid for Stealthburner's logo", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Weaslus/Electronics-Bay-Seperator", "title": "Electronics Bay and Enclosure...", "creator": "Weaslus", "description": "Better enclose chamber and keep heat from electronics", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "ZZP8202/Pull-out_electrical_store", "title": "Pull-out electrical store", "creator": "ZZP8202", "description": "Voron 2.4 Pull-out electrical store\uff08350mm only\uff09", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Zen3D/V0_1515_T-nut", "title": "V0 1515 T-nut", "creator": "Zen3D", "description": "M3 square and hex nuts for Voron0 1515 frame", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Zen3D/V0_Handle", "title": "V0 Handle", "creator": "Zen3D", "description": "Voron0 Handle for 3mm panels", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Zen3D/V0_MidPanel_HexPattern", "title": "V0 MidPanel HexPattern", "creator": "Zen3D", "description": "Voron0 MidPanel with Hex pattern and Wire cover", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "Zen3D/V0_Skirt", "title": "V0 Skirt set", "creator": "Zen3D", "description": "SSR, PowerSwitch, Adxl, Nameplate and color change printing", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "aTinyShellScript/RS_PSU_DIN_Brackets", "title": "RS PSU DIN Bracket", "creator": "aTinyShellScript", "description": "DIN brackets for MeanWell RS PSUs with 80mm spacing.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "ademuri/Lights_Camera_Voron", "title": "Lights, Camera, Voron", "creator": "ademuri", "description": "A mount for LED strips and Picam for the V0.1", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "aeresov/MeanWell_UHP_DIN_mount", "title": "MeanWell UHP-xxx DIN mount", "creator": "aeresov", "description": "A bracket for MeanWell UHP series PSU (200, 350 and 500) to mount...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "aeresov/Raspberry_Pi_DIN_mount", "title": "Raspberry Pi DIN mount", "creator": "aeresov", "description": "A bracket for Raspberry Pi 3/4 to mount it onto DIN rail, along or...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "aeresov/SKR_DIN_mount", "title": "SKR 1.3/1.4 DIN mount", "creator": "aeresov", "description": "A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "aeresov/TL_filament_sensor_bracket", "title": "TL filament sensor bracket", "creator": "aeresov", "description": "A bracket for TL filament sensor to mount near stock spool holder.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "aeresov/cable_tie_DIN_mount", "title": "cable tie DIN mount", "creator": "aeresov", "description": "A bracket for cable ties to route cables across DIN rails.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "al3ph/analog_timer_mount", "title": "Analog Timer Mount", "creator": "al3ph", "description": "A skirt mount for analog timer", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "al3ph/filament_runout", "title": "Filament Runout Sensor", "creator": "al3ph", "description": "A simple filament runout sensor", "printer_compatibility": "V0.2, V1.8, V2.4, VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "al3ph/led_mount", "title": "LED Mount", "creator": "al3ph", "description": "A mount for 10mm LED WS2812 strips", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "al3ph/pl05_mount", "title": "PL05 Sensor Mount", "creator": "al3ph", "description": "A mount PL05 inductive sensor", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "alanho/BTT_PITFT50_v2_Mount", "title": "BTT PITFT50 v2 Mount", "creator": "alanho", "description": "A mount for the BTT PITFT50 v2 Touch Display", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "albert/IKEA_Dioder_Led_Mount", "title": "IKEA Dioder Led Mount", "creator": "albert", "description": "A mount for the IKEA Dioder LED strip", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "antoinecellerier/ds18b20-sensor-mount", "title": "DS18B20 Sensor Mount", "creator": "antoinecellerier", "description": "DS18B20 temperature sensor mount", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "ardichoke/v0-long-thumb-nut", "title": "V0 Long Thumb Nut", "creator": "ardichoke", "description": "Taller thumb nuts for V0 bed", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "arkeet/dti-mount", "title": "Dial test indicator mount", "creator": "arkeet", "description": "A toolhead mount for a dial test indicator, where the tip is...", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "arkeet/magnet-fan-cover", "title": "Magnetic hotend fan cover", "creator": "arkeet", "description": "A replacement hotend fan cover, held with magnets instead of screws.", "printer_compatibility": "V1.8, V2.4, VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "arkeet/mgn12", "title": "MGN12 X-axis", "creator": "arkeet", "description": "Replaces the dual MGN9H rails with a single MGN12H.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "arkeet/v0-dc-inlet", "title": "V0 DC inlet", "creator": "arkeet", "description": "Skirt inlet for external 24V DC power supply.", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "baccula/revo_skirt_nozzle_holder", "title": "Revo Nozzle Holder for v2.4 350", "creator": "baccula", "description": "A remix of Andre's design allowing for skirt storage of 4 E3D Revo...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "beaugalbraith/Nova_Printhead", "title": "Nova Printhead", "creator": "beaugalbraith", "description": "Use Nova Hotend with Afterburner", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "bobbleheed/Filament_Runout", "title": "Filament Runout Sensor", "creator": "bobbleheed", "description": "Filament runout sensor that replaces the stock bowden retainer", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "bobbleheed/Magnetic_Panels", "title": "Magnetic Panels", "creator": "bobbleheed", "description": "Magnetic clips to allow for easy removal and installation of panels", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "btp/Galileo_Switchwire_Chain_Mount", "title": "Galileo chain mount (befenybay)", "creator": "btp", "description": "Modified chain mount position to cater for difference with Galileo...", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "buzzdalf/connector_cover", "title": "v1.8/2.4 Afterburner connector...", "creator": "buzzdalf", "description": "v1.8/2.4 Connector cover for 42STH20-1004AS", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "buzzdalf/ender_switchwire_taller_z", "title": "Ender 3 Switchwire Taller Z Mod", "creator": "buzzdalf", "description": "Taller Z Mod", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "buzzdalf/ytension", "title": "Ender 3 Switchwire Y Tensioner Mod", "creator": "buzzdalf", "description": "Y Tension Mod", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "bythorsthunder/MGN9_Backers", "title": "MGN9 Backers Idlers", "creator": "bythorsthunder", "description": "New idler uppers for MGN9 Extrusion backers", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "bythorsthunder/Stealthburner_Rapido_Uhf", "title": "Stealthburner Rapido UHF", "creator": "bythorsthunder", "description": "Stealthburner mod for Rapido UHF", "printer_compatibility": "V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "chirpy/NozzleWiper", "title": "V0.1 Nozzle Wiper", "creator": "chirpy", "description": "Servo powered nozzle wiper and purge bucket", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "chirpy/RunoutUnklicky", "title": "Runout UnKlicky Sensor", "creator": "chirpy", "description": "Runout UnKlicky Sensor is a filament runout sensor with mounts for...", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "chirpy/TipTophat", "title": "V0.1 Raised Tophat", "creator": "chirpy", "description": "Alternative Tophat design that uses stock panels and raises height...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "chri.kai.in/20x20mm_Profile_Covers", "title": "20x20mm Profile Covers", "creator": "chri.kai.in", "description": "Provide overlapping and flush slot covers for 20x20mm slot6...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "chri.kai.in/Angry_CAM_USB", "title": "Angry CAM USB", "creator": "chri.kai.in", "description": "Housing for small USB camera module, allowing mounting to gantry or...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "chri.kai.in/Exhaust_Adapter_100mm", "title": "Exhaust Adapter 100mm", "creator": "chri.kai.in", "description": "Replace 60mm exhaust fan with 100mm ventilation system adapter", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "chrisrgonzales/270_degree_hinge", "title": "270\u00b0 Front Panel Hinge", "creator": "chrisrgonzales", "description": "Hinges that have 270\u00b0 of swivel, parametric CAD included", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "christophmueller/Phaetus_Dragonfly_BMO_Afterburner", "title": "Phaetus and Zodiac Dragonfly BMO...", "creator": "christophmueller", "description": "Covers both the original Phaetus variant as well as the Zodiac one.", "printer_compatibility": "V1.8, V2.4, VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "claytono/2.4-extrusion-jig", "title": "Voron 2.4 Extrusion Jig", "creator": "claytono", "description": "A jig help align extrusions to get a properly square frame", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "claytono/fysetc-s6-v2-mount", "title": "Fysetc S6 V2 Mount", "creator": "claytono", "description": "DIN Mount for the Fysetc S6 V2 controller", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "claytono/v0-zip-tie-skirts", "title": "V0 Zip Tie Skirts", "creator": "claytono", "description": "V0 skirts with small loops added along the top to allow zip tyiing...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "clee/Monster8_heatsert_mount", "title": "Monster8 DIN Rail Mounts", "creator": "clee", "description": "DIN mount for Makerbase Monster8 V1/V2 controller", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "cmrny/v01_motor_panel_no_rub", "title": "V0.1 Motor Panel Modification", "creator": "cmrny", "description": "V0.1 Motor panel modification to keep umbilical and bowden tube...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "conqueror433/Voron_Parts_Logo", "title": "Voron Parts Logo", "creator": "conqueror433", "description": "Voron Parts Logo for your back panels, 3D Print or Laser Cut", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "conqueror433/Voron_V0.1_Parts_Logo", "title": "Voron V0.1 Parts Logo", "creator": "conqueror433", "description": "Voron Parts Logo for your V0 deck panel", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "consibonsi/Y-Mod_SW_9mm", "title": "Y-Mod SW 9mm", "creator": "consibonsi", "description": "9mm Y belt mod for SW", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "csch0/SW_FanMount_No_Tape", "title": "SW Fan Mount No Tape", "creator": "csch0", "description": "60x20 Fan Mount for SW without tape", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "d3nny/mains_plug_panel_for_RND_165-00057", "title": "Filtered Power Plug with...", "creator": "d3nny", "description": "Filtered Power Plug for RND 165-00057 and CAT6-Plug", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "davidauvergne/Center_cable_management_duct", "title": "Center_cable_management_duct", "creator": "davidauvergne", "description": "Mod for a centered cable management", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "dePrintinator/HEPA_Filter_Exhaust", "title": "HEPA Exhaust", "creator": "dePrintinator", "description": "HEPA filter chamber exhaust replacement.", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "deepfriedheroin/v0_bed_wagos", "title": "v0 Wago Bed Mounts", "creator": "deepfriedheroin", "description": "Easy to install Wago mounts for the v0", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "deepfriedheroin/v0_power_wagos", "title": "v0 Power Wagos", "creator": "deepfriedheroin", "description": "Easy to install Wago mounts for v0 mains", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "deepfriedheroin/v2_bed_wagos", "title": "V2 Bed Wagos", "creator": "deepfriedheroin", "description": "Wire management for the v2 bed", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "doubletrouble/V0_Skirt_Mod", "title": "V0 Skirt Mod", "creator": "doubletrouble", "description": "V0 Skirt Mod", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "eamars/stealthburner_crazy_dragon_toolhead", "title": "Stealthburner (RC1) Dragon...", "creator": "eamars", "description": "The Stealthburner toolhead mount for Mellow Crazy, TriangleLab...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "eddie/LED_Bar_Clip", "title": "LED Bar Clip", "creator": "eddie", "description": "Modular LED Clip for mounting LED Strip to 2020 Extrusions", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "eddie/V1.8_12mm_Z_Mod", "title": "V1.8 12mm Z Mod", "creator": "eddie", "description": "Add V1.8 option for 12mm Z rods", "printer_compatibility": "V1.8", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "edwardyeeks/Tridentified_V2.4_Power_Inlet", "title": "Tridentified V2.4 Power Inlet", "creator": "edwardyeeks", "description": "Trident style side power inlet for V2.4 using Z Drive Motor...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "elcrni/Trident_Internal_Spool_Holder", "title": "Trident Internal Spool Holder", "creator": "elcrni", "description": "Internal spool holder for 300 and 350 Tridents. Supports full size...", "printer_compatibility": "VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "elcrni/V2.4-Trident-Spool-Holders", "title": "V.24/Trident Spool Holder", "creator": "elcrni", "description": "Spool holder that mounts on top for \"too close to the wall\" printers", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "evandepol/Crydom-GN-Guard", "title": "Crydom GN Terminal Guard", "creator": "evandepol", "description": "A simple safety guard for the terminals on a Crydom GN SSR", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "evandepol/Voron2.4-Cable-clamps", "title": "Voron 2.4 cable clamps", "creator": "evandepol", "description": "A set of 2020-mounted cable guards to organize and dress the wiring...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "falo/lgx_lite_side_can", "title": "LGX Lite CAN Side Mount", "creator": "falo", "description": "A side mounting for a CAN board (Huvud/SHT42) to the LGX Lite", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "falo/magnetic_grill_cover", "title": "Magnetic Exhaust Grill Cover", "creator": "falo", "description": "A magnetic cover to seal the filtered exhaust", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "falo/toolhead_pcb_to_can", "title": "Toolhead PCB to CAN Mount Adaptor", "creator": "falo", "description": "A mount to enable side mounting of a CAN board (Huvud/SHT42) in...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "filotto78/6mm_slot_cover", "title": "6mm slot cover", "creator": "filotto78", "description": "Simple cover for extrusion with 6mm slot width", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "gamebofh/door-panels", "title": "Laser cut door panels", "creator": "gamebofh", "description": "Files to allow you to create laser cut door panels with some...", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "gauravmm/crazy_mozzie_cw2", "title": "Crazy Mozzie HF toolhead SB+CW2", "creator": "gauravmm", "description": "Toolhead for Crazy Mozzie HF, compatible with Stealthburner and...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "gen2eng/z_carriage_stop_pass_through", "title": "Switchwire LED wire pass through", "creator": "gen2eng", "description": "Z Carriage Stop modification that makes pass through of wires for...", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "geoffreyyoung/dual_rail_guide", "title": "Dual Rail Installation Guide", "creator": "geoffreyyoung", "description": "Rail installation guide that also works for the 2.4 dual rail...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "geoffreyyoung/lgx", "title": "LGX Info, Links, and Models", "creator": "geoffreyyoung", "description": "Useful information and models for using the Bondtech LGX extruder...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "gerritwellen/manta-m8p-bracket", "title": "Manta M8P Mount", "creator": "gerritwellen", "description": "Mounting Bracket for BTT Manta M8P", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "golas/v0-extended-tophat-hinge", "title": "V0.1 Extended tophat hinge", "creator": "golas", "description": "Extended tophat for v0.1 with hinges (integrated or screwed ones).", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "golas/v0-trident-skirt-mix", "title": "V0.1 Trident skirt remix with...", "creator": "golas", "description": "Trident style v0.1 skirt mix with 12864 Mini Lcd on front or plain...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hartk1213/Voron0.2_2.8_WaveshareDisplay", "title": "Voron0.2 2.8 Waveshare Display", "creator": "hartk1213", "description": "2.8 Waveshare display for V0.2", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hartk1213/Voron0.2_Rear_Keystone_Skirt", "title": "Voron0.2 Rear Keystone Skirt", "creator": "hartk1213", "description": "Added keystone slot on rear skirt for V0.2", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hartk1213/Voron0_C14Inlet", "title": "Voron0 C14Inlet", "creator": "hartk1213", "description": "Added a new Power inlet that uses a Fused C14 plug and switch that...", "printer_compatibility": "V0.1", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hartk1213/Voron0_ExtendedLegs", "title": "Voron0 ExtendedLegs", "creator": "hartk1213", "description": "New extended legs to raise the printer up a tiny bit more", "printer_compatibility": "V0.1", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hartk1213/Voron0_ExtrusionSkirt", "title": "Voron0 ExtrusionSkirt", "creator": "hartk1213", "description": "Created a new skirt design that uses 50mm extrusions as legs and it...", "printer_compatibility": "V0.1", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hartk1213/Voron0_Hinged_Top_Hat", "title": "Voron0 Hinged Top Hat", "creator": "hartk1213", "description": "Created a new hinged top hat design for the V0 so it can fold away...", "printer_compatibility": "V0.1", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hartk1213/Voron0_MGN9C_X_Axis", "title": "Voron0 MGN9C X Axis", "creator": "hartk1213", "description": "This mod, replaces the stock MGN7H for MGN9C on the V0", "printer_compatibility": "V0.1", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hartk1213/Voron0_deck_panel_with_logo_and_VORON0", "title": "Voron0 deck panel", "creator": "hartk1213", "description": "Used @Kruppes blank deck panel to add the logo as well as the name...", "printer_compatibility": "V0.1", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hartk1213/Voron0_display_dualcolor", "title": "Voron0 display dualcolor", "creator": "hartk1213", "description": "Added a dual color file for the Voron Display Front housing", "printer_compatibility": "V0.1", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hartk1213/Voron2.4_GE5C", "title": "Voron2.4 GE5C", "creator": "hartk1213", "description": "This mod replaces the stack of printed z joints with a metal...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hartk1213/Voron2.4_SexBolt_ZEndstop", "title": "Voron2.4 SexBolt ZEndstop", "creator": "hartk1213", "description": "This mod replaces stock V2 Z endstop with a different style", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hartk1213/Voron2.4_Trident_Pins_Mod", "title": "Voron2.4 and Trident Pins Mod", "creator": "hartk1213", "description": "This mod replaces all the M5 screws for all idlers/pulleys/bearings...", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hartk1213/Voron2.4_Y_Endstop_Relocation", "title": "Voron2.4 Y Endstop Relocation", "creator": "hartk1213", "description": "This mod relocates the Y endstop to the top A drive piece", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "henrikssn/parametric_spool_holder", "title": "Parametric Spool Holder", "creator": "henrikssn", "description": "Spool holder where the length is a parameter.", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "henrikssn/plug_panel_generic", "title": "Plug Panel Mod for Generic...", "creator": "henrikssn", "description": "v2.4 plug panel for generic unfiltered modules with 66mm x 27mm...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hergtoler/exhaust_120mm_duct", "title": "Exhaust Housing for 120mm Fan...", "creator": "hergtoler", "description": "v2.4 Exhaust Housing for 120mm Fan and 4in Duct", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hernsl/bottom_panel_mag_clip", "title": "Bottom Panel Mag Clip", "creator": "hernsl", "description": "v2.4 magnetic clips to retain bottom panel", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hhammarstrand/afterburner_connector_cover_42STH20-1004AS", "title": "Afterburner connector cover for...", "creator": "hhammarstrand", "description": "Connector cover for 42STH20-1004AS", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hijax_pl/corner_panel_clip", "title": "Corner panel clip", "creator": "hijax_pl", "description": "V2 panel corner frames using 3-way L brackets in the corners", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hijax_pl/din_rail_mount", "title": "Din Rail mount", "creator": "hijax_pl", "description": "Adapter to attach DIN Rail to 2020 extrusion.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hijax_pl/ender_compatible_controller_mount", "title": "Controler Board adapters", "creator": "hijax_pl", "description": "DIN (rotated) and legacy adapters for boards like SKR mini E3.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hoschi/FYSETC_Spider_DIN_Mount", "title": "FYSETC Spider DIN Rail Mount", "creator": "hoschi", "description": "DIN rail mount for FYSETC Spider", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hymness1/10x11mm_chain_VSW", "title": "10x11mm chain VSW", "creator": "hymness1", "description": "Printable and openable 10x11mm chain", "printer_compatibility": "V0.2, VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "hymness1/Quickdraw_probe_Voron_Switchwire", "title": "Quickdraw probe Voron Switchwire", "creator": "hymness1", "description": "Detachable magnetic probe with docking system for VSW", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "iblue/TophatExtractor", "title": "V0.1 Tophat Extractor", "creator": "iblue", "description": "Tophat Extractor for the Voron V0.1 with activated charcoal and...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "jappaj/FanSaver", "title": "V0.1 FanSaver", "creator": "jappaj", "description": "A printable fix for overheating V0.1 blower fans", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "jasonc/Z_Idler_Shoulder_Bolt", "title": "V2.4 Z-Idler Shoulder Bolt Mod", "creator": "jasonc", "description": "Modification to the idler carriers to accept a 25mm shoulder bolt....", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "jatson/plug_panel_schurter", "title": "Plug panel mod for Schurter...", "creator": "jatson", "description": "A modified plug panel for Voron 2.4r1 with Schurter CD44.1101.151...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "jaysuk/4.3_fly_screen_mount", "title": "4.3 Fly Screen Mount", "creator": "jaysuk", "description": "A mount for a 4.3\" Fly Screen", "printer_compatibility": "V0, V0.1", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "jeoje/4.3_Inch_Touchscreen_Mount", "title": "4.3\" Touchscreen Mount", "creator": "jeoje", "description": "Mounts a [Waveshare 4.3inch Capacitive Touch...", "printer_compatibility": "V2.4, VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "jeoje/Molex_MLX_Microfit_Bed_Connector_Mount", "title": "Molex MLX and Microfit 3.0 Bed...", "creator": "jeoje", "description": "Solid mount your bed connectors", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "jeoje/Sturdy_Handles", "title": "Sturdy Handles", "creator": "jeoje", "description": "Modified v2.2 handles with no panel rest and with 4 anchor points", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "jeoje/Z_Chain_Guide_Thermistor_Mount", "title": "V2.4 Z Chain Guide with...", "creator": "jeoje", "description": "Modifies the Z chain guide to hold a chamber thermistor", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "jgehrig/v0_lcdskirt", "title": "V0 LCD Touchscreen Skirt", "creator": "jgehrig", "description": "3.2\" LCD Touch Screen Skirt", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "johanncc/Raspberry_Pi_Camera_Mount", "title": "Raspberry Pi Camera Mount", "creator": "johanncc", "description": "Low profile raspberry pi camera mount", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "joposter/v0_clippable_ledmounts", "title": "V0 Clippable LED Caselight", "creator": "joposter", "description": "LED Case light for the V0 that clips into the extrusions", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "kageurufu/mgn12-euclid", "title": "Euclid Probe Carriage", "creator": "kageurufu", "description": "A MGN-12 carriage with an inset mount for a Euclid Probe", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "khay/V2-200_4020_Electronics_Fan", "title": "Fan for V2-200mm\u00b2", "creator": "khay", "description": "Middle Skirt for V2-200mm\u00b2 Electronics Compartment", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "khay/V2_3x_Keystone_Plugpanel", "title": "3x Keystone PlugPanel", "creator": "khay", "description": "PlugPanel with Options for 3 Keystones", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "khay/micro_backplate", "title": "V0 Micro Backplate", "creator": "khay", "description": "Minimalistic backplate for cooler motors and electronics", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "kirby/v0_sherpa_mini_direct_drive", "title": "V0 Sherpa Mini Direct Drive Mod", "creator": "kirby", "description": "A direct drive mod for the V0 using the Annex Sherpa Mini extruder", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "lakai/Bruag_Skirts", "title": "Bruag Skirts", "creator": "lakai", "description": "V2 350mm skirts inspired by Bruag Facades", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "leandromarceddu/PowerSkirt", "title": "PowerSkirt", "creator": "leandromarceddu", "description": "Modified skirtpiece for a digital power monitor", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "littleferris/V0_Skirt_Inlet", "title": "V0 c14 Skirt Inlet", "creator": "littleferris", "description": "V0 C14 Skirt inlet", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "madfabrications/Vertical_PSU_Mount", "title": "Vertical PSU Mount", "creator": "madfabrications", "description": "Mounts the PSU vertically on the DIN rails", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "madros/V0_skirt_OLED", "title": "V0 OLED-skirt", "creator": "madros", "description": "V0 skirt with 0.96\" OLED", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "maximilian-foerg/AB_Turbo_Mod", "title": "Afterburner Turbo Mod", "creator": "maximilian-foerg", "description": "A purely cosmetic mod for Afterburner", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "maximilian-foerg/VSW_Double_60mm_Fan_Mount", "title": "Switchwire Double 60mm Fan Mount", "creator": "maximilian-foerg", "description": "A mount for two (or four) 60mm fans in SW's electronics compartment", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "mikepthomas/MKS_Mosfet_Mount", "title": "MKS Mosfet Mount", "creator": "mikepthomas", "description": "MKS Mosfet Mount based of the Trident Raspberry Pi Mount.", "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "mjoaris/10x11_Cable_Chain_Endcaps", "title": "10x11 Cable Chain Endcaps", "creator": "mjoaris", "description": "Printable Endcaps for 10x11 Cable Chains", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "mjoaris/Mini12864_LCD_Mount_for_V2.4", "title": "Mini12864 LCD Mount", "creator": "mjoaris", "description": "Swiveling case for the Fysetc Mini12864 LCD", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "mosher/m3_door_hinges", "title": "Door hinges with M3 screws shafts", "creator": "mosher", "description": "Simple mod of print in place door hinges, which uses m3 screws as...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "mpfl/V0.1_skirt_OLED", "title": "V0.1 OLED-skirt", "creator": "mpfl", "description": "V0.1 skirt with 0.96\" OLED", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "muradir/Zodiac_BMO_Stealthburner_Toolhead", "title": "Zodiac BMO Stealthburner Toolhead", "creator": "muradir", "description": "A Stealthburner toolhead for the Zodiac BMO Hotend, based on the...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "natewalck/v1.8_Jigs", "title": "V1.8 Jigs", "creator": "natewalck", "description": "Jigs for assembling V1.8", "printer_compatibility": "V1.8", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "nhchiu/V0.1_Movable_Pulley_Z", "title": "V0.1 Movable Pulley Z Drive", "creator": "nhchiu", "description": "A movable pulley system on the Z axis with 1:8 total speed ratio...", "printer_compatibility": "V0.1", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "nikolasbabetas/Neopixel_Holder", "title": "Neopixel Holder", "creator": "nikolasbabetas", "description": "A holder to attach Neopixel/WS2812B Led Strips to the V0.1", "printer_compatibility": "V0.1", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "ommy/roller_brackets", "title": "roller brackets", "creator": "ommy", "description": "Brackets to help rolling V2 on its side.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "oxno/rbp_zero_braket", "title": "RBP Zero Bracket", "creator": "oxno", "description": "Bracket for Raspberry pi zero.", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "padok/chain_anchor-ADXL345_mount", "title": "Chain Anchor - ADXL345 mount Mod", "creator": "padok", "description": "A ADXL345 mount for the Afterburner", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "piet206/V1.8._Z_Rails_Mod", "title": "V1.8 Z Rails Mod", "creator": "piet206", "description": "Add MGN12H linear rails for Z axis motion", "printer_compatibility": "V1.8", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "prasadp4009/SW_SB_CRTouch", "title": "StealthBurner CR Touch Mod", "creator": "prasadp4009", "description": "Voron SW StealthBurner CR Touch Mod", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "quattroerik/front_door_m3_180_deg_3mm", "title": "V2.4 Door Hinge M3 3mm 180deg", "creator": "quattroerik", "description": "Voron 2.4 door hinges for 3mm panel, 180 deg opening and m3 screw...", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "randell/Door_Hinges", "title": "Door Hinges", "creator": "randell", "description": "Door hinges that use an M3 bolt for a pin and bolts thru the panel", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "randell/Microswitch_Endstop", "title": "Microswitch Pod for PCB", "creator": "randell", "description": "Modified endstop pod for use of endstop switches mounted on a PCB", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "raymondh/LargeSpoolHolders", "title": "Large Spool Holders", "creator": "raymondh", "description": "Larger spool holders for KVP spools", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "reQu1em00/Kirigami_LED_Bed_Front", "title": "Kirigami LED Bed Front", "creator": "reQu1em00", "description": "Kirigami bed front with space for a single LED or Neopixel button", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "reapola/MKS_CANable_Pro_mount", "title": "MKS CANable Pro DIN Mount", "creator": "reapola", "description": "MKS CANable Pro mount which mounts on a DIN rail", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "revnull/rpi_7in_display_mount", "title": "Raspberry Pi 7inch Display Mount", "creator": "revnull", "description": "An articulating mount for the offical Raspberry Pi 7inch touch screen", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "richardjm/adxl-chain", "title": "ADXL drag chain mount", "creator": "richardjm", "description": "Permanent mount for ADXL boards on the back of the motor, replacing...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "richardjm/back-plate", "title": "Back blanking plate", "creator": "richardjm", "description": "Back blanking plate that can be used instead of the exhaust filter...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "richardjm/led-mounts", "title": "LED 15.5mm quarter round mounts", "creator": "richardjm", "description": "Mounting corners with integrated cable runs for 15.5mm quarter...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "richardjm/picam-corner", "title": "Picam corner mount", "creator": "richardjm", "description": "Out of the way corner mounted picam", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "richardjm/snap-latch-2020", "title": "Printable snap latches for 2020...", "creator": "richardjm", "description": "Quick release panel latch inspired by the work of others.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "rngSplat/SW_Deck_Plate", "title": "Printable Switchwire Deck Plate", "creator": "rngSplat", "description": "Print a deck plate for Switchwire with debossed Voron logo", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "roboticator24/4inch_touchscreen_mount_for_v2.4", "title": "Touchscreen for OctoDash", "creator": "roboticator24", "description": "Mount a 4-inch LCD touchscreen to your V2.4 in place of the usual...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "rsheng118/BTT_octopus_DIN_vertical_mount", "title": "BTT octopus DIN vertical mount", "creator": "rsheng118", "description": "DIN vertical mount for Big Tech Tree Octopus board", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "ryandam/Cable_management_duct", "title": "Cable Management Duct", "creator": "ryandam", "description": "Zip tie mount intergrated cable duct to hide your cable", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "sammynorway/LGX-stealthburner-connector-cover", "title": "LGX stealthburner connector cover", "creator": "sammynorway", "description": "Cable cover for LGX and stealthburner", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "samwiseg0/4channel_relay_under_deck_mount", "title": "4 Channel Relay Under Deck Mount", "creator": "samwiseg0", "description": "Mod to mount a 4 channel GPIO controlled relay", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "samwiseg0/ab_plug_microfit_1x4", "title": "AB Plug (Microfit 1x4)", "creator": "samwiseg0", "description": "Mod to mount A & B motor connectors to the gantry", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "samwiseg0/corner_cable_hide", "title": "Corner Cable Hide/Cover (LED Wires)", "creator": "samwiseg0", "description": "Mod to hide cables around z idlers", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "samwiseg0/esp8266_nodemcu_din_mount", "title": "ESP8266 NodeMCU Din Mount", "creator": "samwiseg0", "description": "Din mount for ESP8266 NodeMCU", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "samwiseg0/extrusion_thermistor_mount", "title": "Extrusion/Chamber Thermistor Mount", "creator": "samwiseg0", "description": "Extrusion mount for a NTC100K Thermistor extrusion", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "samwiseg0/lrs_screw_terminal_cover", "title": "LRS PSU Screw Terminal Cover", "creator": "samwiseg0", "description": "Mod to cover the screw terminals for several LRS style PSUs", "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "samwiseg0/microfit_2x3_skirt_connector_adxl", "title": "Microfit 2x3 Skirt Connector (ADXL)", "creator": "samwiseg0", "description": "Mod for a Microfit 2x3 connector to be mounted in a skirt", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "samwiseg0/voyager_gtx_din_mount", "title": "Corsair Flash Voyager GTX Din Mount", "creator": "samwiseg0", "description": "Din carrier for a Corsair Flash Voyager GTX", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "scanlory/clip_on_door_frame", "title": "Clip-On Front Door Frame", "creator": "scanlory", "description": "Clip-on frame to stiffen and seal front door panels when using...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "slitte/PCB_Probe", "title": "PCB_Probe", "creator": "slitte", "description": "PCB for BAT85 and pull up resistor", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "slitte/ssd_bracket", "title": "ssd_bracket", "creator": "slitte", "description": "bracket for mounting a 2.5\" ssd to a din rail", "printer_compatibility": "V2.4, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "sloscotty/SW_Wall_Plate", "title": "Switchwire Wall Plate", "creator": "sloscotty", "description": "SW plate for enclosure", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "sloscotty/TopHat_Cam_Extension", "title": "NoNutz TopHat Cam Extension", "creator": "sloscotty", "description": "Tophat extension with integrated webcam for V0/0.1", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "spacelab2021/Orbiter-Clockwork", "title": "Orbiter Clockwork Mount", "creator": "spacelab2021", "description": "A clockwork adaptor for the Orbiter v1.5 Extruder with full...", "printer_compatibility": "V1.8, V2.4, VSW, VT", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "sse018/Octopus_DIN_Rail_bracket", "title": "Octopus DIN Rail bracket", "creator": "sse018", "description": "A Din rail mount for BTT Octopus board", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "strayr/stealthburner_creality_toolhead", "title": "Creality toolhead for stealthburner", "creator": "strayr", "description": "Use a creality ender 3 style hotend with stealthburner", "printer_compatibility": "V1.8, V2.4, VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "sttts/Waveshare-5.5-inch-HDMI-AMOLED", "title": "Waveshare 5.5inch HDMI AMOLED Mount", "creator": "sttts", "description": "Mod to mount a Waveshare 5.5inch full HD display on a V2", "printer_compatibility": "V2.4, VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "tallman5/z-locks", "title": "Z Locks", "creator": "tallman5", "description": "Helping hands curing v2.4 build, replaces long zip ties.", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "tameike/DIN_Rail_2020_holder", "title": "Din Rail 2020 Holder", "creator": "tameike", "description": "Attaching DIN Rails to 2020", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "tameike/DIN_Rail_SKR_1.3_90deg", "title": "Din Rail SKR 90 deg", "creator": "tameike", "description": "SKR V1.3 bracket turned 90 degrees", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "tameike/Jetpack_V0", "title": "Jetpack V0 base", "creator": "tameike", "description": "Attach Jetpack to V0 frame", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "tameike/V0_TR_Mounting_Frame", "title": "TacoRaven Mounting Frame", "creator": "tameike", "description": "TR V0 mount", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "tayto-chip/skirt_switch_mod", "title": "V2.4 Skirt Switch Mod", "creator": "tayto-chip", "description": "Add a ON/OFF Switch to side or front skirts", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "teookie/AB_dial_indicator_mount", "title": "AB dial indicator mount", "creator": "teookie", "description": "Mount for attaching standard dial indicators to AB", "printer_compatibility": "V1.8, V2.4, VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "teookie/skr_brace", "title": "SKR Brace", "creator": "teookie", "description": "Rigidize and stabilize SKR 1.4 mounts", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "th0mpy/beefy-din", "title": "BEEFY Din Clips", "creator": "th0mpy", "description": "Two piece BEEFY Din Clips, holds stronger", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "togi/exhaust_housing_side_fitting", "title": "Exhaust housing side fitting", "creator": "togi", "description": "Moves the exhaust housing bowden fitting 90 degrees to allow the...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "top_gun_de/mount_for_umbilical", "title": "mount_for_umbilical", "creator": "top_gun_de", "description": "Umbilical guide that goes on the chain anchor", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "warriorofwire/slenderfan", "title": "Slenderfan for Afterburner", "creator": "warriorofwire", "description": "Lighter, quieter, smaller Afterburner", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "whoppingpochard/extrusion_backers", "title": "Extrusion Backers", "creator": "whoppingpochard", "description": "Laser-cut metal pieces to counteract bimetallic frame warping", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "wile-e1/Deck_Panel_Support_Clips", "title": "Deck Panel Support Clips", "creator": "wile-e1", "description": "Clips to help support lower deck panels to prevent (or fix) warping:", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "wile-e1/Stealthburner_CW1_PCB_Cover", "title": "Stealthburner + CW1 + PCB Cover", "creator": "wile-e1", "description": "Low-poly for Stealthburner + CW1 + PCB installations:", "printer_compatibility": "V1.8, V2.4, VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "wrez/astrodyne-inlet", "title": "V0 Alternate IEC 320 C14 Power...", "creator": "wrez", "description": "Drop in replacement for alternate-source power inlet if spec inlet...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xbst_/ADXL345_V0_Mount", "title": "ADXL345 V0 Mount", "creator": "xbst_", "description": "V0 Mount for a ADXL345 module", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xbst_/Bed_Hinge", "title": "Car Hood Style Bed Hinge", "creator": "xbst_", "description": "A way of reaching electronics from the top by having a \"car hood\"...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xbst_/Duct_Mount", "title": "Duct Mount", "creator": "xbst_", "description": "100mm/4\" ducting mount for ventilation. Also supports umbilical...", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xbst_/DuetZero", "title": "DuetZero", "creator": "xbst_", "description": "Pi Zero mount over a Duet2 for space saving", "printer_compatibility": "V0.2, V1.8, V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xbst_/Easy_Access_Rear_Panels_v0", "title": "Easy Access Rear Panels", "creator": "xbst_", "description": "New rear panels designed to expose the extruder for easy filament...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xbst_/Flat_Skirts", "title": "Flat V2.4 Skirts", "creator": "xbst_", "description": "Flat V2.4 Skirts so a panel without cutouts can be used", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xbst_/HOYMK_SSR_Mount", "title": "HOYMK SSR Mount", "creator": "xbst_", "description": "Mount for Chinese HOYMK SSR", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xbst_/Hat_LED_Mount", "title": "Hat LED Mount", "creator": "xbst_", "description": "Top Hat LED module mount", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xbst_/LED_Holder", "title": "PCB LED Holder", "creator": "xbst_", "description": "Very simple mount for some (?) PCB LED Bars", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xbst_/Max31865_DIN_Mount", "title": "DIN Mount Max31865", "creator": "xbst_", "description": "A simple DIN rail mount for the Adafruit (or SAME SIZE clone)...", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xbst_/Omron_DIN_Mount", "title": "DIN Mount Omron Relay", "creator": "xbst_", "description": "A simple DIN rail mount for the BOM Relay", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xbst_/Relay_DIN_Mount", "title": "DIN Mount Pi 4x Relay Board", "creator": "xbst_", "description": "A simple DIN rail mount for the 4 channel relay board for Raspberry Pi", "printer_compatibility": "V1.8, V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xbst_/V0_Electronic_Panel", "title": "V0 Electronics Cover", "creator": "xbst_", "description": "A printed cover for v0 electronics. Requires larger printer to print.", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xbst_/V0_M4_Mod", "title": "Mobius 4 (M4) V0 Mod", "creator": "xbst_", "description": "Mod to mount a M4 extruder to a Voron 0 where pocketwatch extruder...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xbst_/V0_Picam", "title": "V0 PiCam Mount", "creator": "xbst_", "description": "A Raspberry Pi Camera Mount For V0", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xbst_/V0_Screw_Front_Hinge_Mod", "title": "Screwed Front Door Hinge", "creator": "xbst_", "description": "Mod to screw the front door panel (instead of VHB)", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xbst_/V0_Skirt_Buttons", "title": "V0 Buttons & OLED Mount", "creator": "xbst_", "description": "Mod to mount custom Gcode macro buttons & Waveshare 1.3\" OLED display", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xbst_/V2.4_Fanless_Middle_Skirt", "title": "V2.4 Fanless Middle Skirt", "creator": "xbst_", "description": "A Fanless alternative middle side skirt", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xbst_/V2.4_Skirt_Buttons", "title": "V2.4 Skirt Buttons", "creator": "xbst_", "description": "Skirt mod for custom Gcode macro buttons", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xbst_/ZipClip_v0", "title": "ZipClip V0", "creator": "xbst_", "description": "Very simple ziptie mount for v0 1515 extrusions", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "xceled/Single_Panel_Magnet_Mount", "title": "Single Panel Magnet Mount", "creator": "xceled", "description": "Mount your front panel using only magnets", "printer_compatibility": "V2.4", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "yenda/vsw_more_robust_belt_paths", "title": "SW More Robust XZ Belt Paths", "creator": "yenda", "description": "Small mods to belt routing components to ensure a better/more...", "printer_compatibility": "VSW", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "yeri/V0_Magnetic_Panels", "title": "V0 Magnetic Panels", "creator": "yeri", "description": "Mount V0 panels with magnets, removes need for hinges and lets you...", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "yeri/V1_3Z", "title": "V1 3Z", "creator": "yeri", "description": "3Z mod for V1", "printer_compatibility": "V1.8", "last_changed": "2023-08-23 23:21:56 +0000"}, {"path": "zruncho/V0_No_Drop_Nuts", "title": "V0 No-Drop Nuts", "creator": "zruncho", "description": "Voron0 nut inserts which auto-align (LDO frames only)", "printer_compatibility": "V0.2", "last_changed": "2023-08-23 23:21:56 +0000"}]
\ No newline at end of file