printer_mods/Mini_After-LGX-Lite (#623)

* Mini_After-LGX-Lite

Mini_After-LGX-Lite

* Update README

Update README

* Update README.md

Updated README.md

* Update README

Update README

* adj print orientation

adj print orientation

* Delete printer_mods\Mini_After-LGX-Lite folder

* Renamed folder, removed spaces

* Adj STL orientation

* repaired mesh, added revo versions

* Delete x-carriage.stl

* Update README.md

printer_mods/Bondtech/Mini-After-LGX-Lite/README.md

@@ -0,0 +1,64 @@
+# LGX Lite Toolhead Setup For Voron V0.1
+
+![](./Images/mini-after-lgx-lite_header-1200x628.jpg)
+
+## AN ALTERNATIVE TO THE VORON ORIGINAL SETUP
+
+### The Mini After-LGX-Lite
+
+Designed by Olof Ogland, based on a draft design by Nemgrea.
+
+This project also includes:
+
+- Mounts for several hotends;
+- AdaFruit and Generic ADXL345 accelerometer mounts – for Klipper’s input shaping tuning;
+- Z-axis Bed Adjustable Y offset set – to allow the print bed to move back and forth from -1 up to +3.5 mm.
+- Klicky – a z-probe mount that attaches with magnets
+
+### License and Credits
+
+License:
+https://github.com/VoronDesign/Voron-0/blob/Voron0.1/LICENSE
+
+Original source:
+https://github.com/VoronDesign/Voron-0
+
+Credits:
+Nemgrea, DaveR, JosAr
+
+Source for Klicky integration:
+https://github.com/jlas1/Klicky-Probe
+
+
+## Mini After-LGX-lite
+
+Most screws required to perform the installation should be already on your kit. You may need some additional sizes and types. The following list identifies them:
+
+- 2x M3x6 BHCS for belts
+- 2x M3x30 BHCS for LGX Lite
+- 4x M2.5×6 low profile for Copperhead
+- 2x M3x10 BHCS LGX Lite to cowling
+
+### Cowling Universal
+![](./Images/Cowling-Universal.png)
+### Hotend Mount MOSQUITO 3007 Fan
+![](./Images/Hotend-Mount-MOSQUITO-3007-Fan.png)
+### Hotend Mount MOSQUITO 3010 Fan
+![](./Images/Hotend-Mount-Mosquito-3010-Fan.png)
+### Hotend Mount COPPERHEAD Screw Mount 3007 Fan
+![](./Images/Hotend-Mount-Copperhead-Screw-Mount-3007-Fan.png)
+### Hotend Mount COPPERHEAD Screw Mount 3010 Fan
+![](./Images/Hotend-Mount-Copperhead-Screw-Mount-3010-Fan.png)
+### Hotend Mount DRAGON 3007 Fan
+![](./Images/Hotend-Mount-DRAGON-3007-Fan.png)
+### Hotend Mount DRAGONFLY 3007 Fan
+![](./Images/Hotend-Mount-DRAGONFLY-3007-Fan.png)
+### Hotend Mount DRAGONFLY 3010 Fan
+![](./Images/Hotend-Mount-DRAGONFLY-3010-Fan.png)
+### X-Carriage
+![](./Images/X-Carriage.png)
+
+## Tools
+
+### PTFE Cutting Jig
+![](./Images/PTFE-Cutting-Jig.jpg)

printer_mods/README.md

@@ -72,6 +72,7 @@ like so:
 | bobbleheed | [Magnetic Panels](./bobbleheed/Magnetic_Panels) | Magnetic clips to allow for easy removal and installation of panels | :x: | :grey_question: | :heavy_check_mark: | :x: | :grey_question: |
 | | [Filament Runout Sensor](./bobbleheed/Filament_Runout) | Filament runout sensor that replaces the stock bowden retainer | :x: | :heavy_check_mark: |:heavy_check_mark: | :x: | :heavy_check_mark: |
 |Boingomw|[Wago mount](./Boingomw/Wago_mount)| Smaller 5 port Wago mount that fits parallel to the support rails |:x:|:grey_question:|:heavy_check_mark:|:x:|:grey_question:|
+|Bondtech|[Mini-After-LGX-Lite](./Bondtech/Mini-After-LGX-Lite) |LGX Lite Toolhead Setup For Voron V0.1. | :heavy_check_mark: | :x: | :x: |:x:|:x:|
 | btp | [Galileo chain mount (befenybay)](./btp/Galileo_Switchwire_Chain_Mount/README.md) | Modified chain mount position to cater for difference with Galileo Clockwork |:x:|:x:|:x:|:heavy_check_mark:|
 | buzzdalf | [v1.8/2.4 Afterburner connector cover for 42STH20-1004AS](./buzzdalf/connector_cover) | v1.8/2.4 Connector cover for 42STH20-1004AS | :x: | :heavy_check_mark: | :heavy_check_mark: |:grey_question:|
 ||[Ender 3 Switchwire Taller Z Mod](./buzzdalf/ender_switchwire_taller_z) | Taller Z Mod | :x: | :x: | :x: | :heavy_check_mark: |