diff --git a/legacy_printers/printer_mods/3D_Black/.metadata.yml b/legacy_printers/printer_mods/3D_Black/Fan_Covers/.metadata.yml similarity index 100% rename from legacy_printers/printer_mods/3D_Black/.metadata.yml rename to legacy_printers/printer_mods/3D_Black/Fan_Covers/.metadata.yml diff --git a/legacy_printers/printer_mods/3D_Black/FAN_COVER_40_2HOLES.step b/legacy_printers/printer_mods/3D_Black/Fan_Covers/FAN_COVER_40_2HOLES.step similarity index 100% rename from legacy_printers/printer_mods/3D_Black/FAN_COVER_40_2HOLES.step rename to legacy_printers/printer_mods/3D_Black/Fan_Covers/FAN_COVER_40_2HOLES.step diff --git a/legacy_printers/printer_mods/3D_Black/FAN_COVER_40_4HOLES.step b/legacy_printers/printer_mods/3D_Black/Fan_Covers/FAN_COVER_40_4HOLES.step similarity index 100% rename from legacy_printers/printer_mods/3D_Black/FAN_COVER_40_4HOLES.step rename to legacy_printers/printer_mods/3D_Black/Fan_Covers/FAN_COVER_40_4HOLES.step diff --git a/legacy_printers/printer_mods/3D_Black/Fan_cover_2holes.STL b/legacy_printers/printer_mods/3D_Black/Fan_Covers/Fan_cover_2holes.STL similarity index 100% rename from legacy_printers/printer_mods/3D_Black/Fan_cover_2holes.STL rename to legacy_printers/printer_mods/3D_Black/Fan_Covers/Fan_cover_2holes.STL diff --git a/legacy_printers/printer_mods/3D_Black/Fan_cover_4holes.STL b/legacy_printers/printer_mods/3D_Black/Fan_Covers/Fan_cover_4holes.STL similarity index 100% rename from legacy_printers/printer_mods/3D_Black/Fan_cover_4holes.STL rename to legacy_printers/printer_mods/3D_Black/Fan_Covers/Fan_cover_4holes.STL diff --git a/legacy_printers/printer_mods/3D_Black/Fan_covers b/legacy_printers/printer_mods/3D_Black/Fan_Covers/Fan_covers similarity index 100% rename from legacy_printers/printer_mods/3D_Black/Fan_covers rename to legacy_printers/printer_mods/3D_Black/Fan_Covers/Fan_covers diff --git a/legacy_printers/printer_mods/Armstr0ng/.metadata.yml b/legacy_printers/printer_mods/Armstr0ng/Led_extrusions_mount/.metadata.yml similarity index 100% rename from legacy_printers/printer_mods/Armstr0ng/.metadata.yml rename to legacy_printers/printer_mods/Armstr0ng/Led_extrusions_mount/.metadata.yml diff --git a/legacy_printers/printer_mods/Armstr0ng/README.md b/legacy_printers/printer_mods/Armstr0ng/Led_extrusions_mount/README.md similarity index 100% rename from legacy_printers/printer_mods/Armstr0ng/README.md rename to legacy_printers/printer_mods/Armstr0ng/Led_extrusions_mount/README.md diff --git a/legacy_printers/printer_mods/Armstr0ng/led-extrusion-cap-left.stl b/legacy_printers/printer_mods/Armstr0ng/Led_extrusions_mount/led-extrusion-cap-left.stl similarity index 100% rename from legacy_printers/printer_mods/Armstr0ng/led-extrusion-cap-left.stl rename to legacy_printers/printer_mods/Armstr0ng/Led_extrusions_mount/led-extrusion-cap-left.stl diff --git a/legacy_printers/printer_mods/Armstr0ng/led-extrusion-cap-right.stl b/legacy_printers/printer_mods/Armstr0ng/Led_extrusions_mount/led-extrusion-cap-right.stl similarity index 100% rename from legacy_printers/printer_mods/Armstr0ng/led-extrusion-cap-right.stl rename to legacy_printers/printer_mods/Armstr0ng/Led_extrusions_mount/led-extrusion-cap-right.stl diff --git a/legacy_printers/printer_mods/Armstr0ng/led-extrusion-link.stl b/legacy_printers/printer_mods/Armstr0ng/Led_extrusions_mount/led-extrusion-link.stl similarity index 100% rename from legacy_printers/printer_mods/Armstr0ng/led-extrusion-link.stl rename to legacy_printers/printer_mods/Armstr0ng/Led_extrusions_mount/led-extrusion-link.stl diff --git a/legacy_printers/printer_mods/Cerulean/readme.md b/legacy_printers/printer_mods/Cerulean/readme.md deleted file mode 100644 index 80e2eede2..000000000 --- a/legacy_printers/printer_mods/Cerulean/readme.md +++ /dev/null @@ -1 +0,0 @@ -Collection of Files from Cerulean \ No newline at end of file diff --git a/legacy_printers/printer_mods/Danowar/AltZChain/.metadata.yml b/legacy_printers/printer_mods/Danowar/AltZChain/.metadata.yml index 149717115..76ef9441d 100644 --- a/legacy_printers/printer_mods/Danowar/AltZChain/.metadata.yml +++ b/legacy_printers/printer_mods/Danowar/AltZChain/.metadata.yml @@ -1,10 +1,10 @@ cad: [] description: Alternative mounting for Z-Axis zipchain images: -- AltZChain1.jpg -- AltZChain2.jpg + - AltZChain2.jpg + - AltZChain1.jpg mod_version: 1 printer_compatibility: -- V2.1 -- V2.2 + - V2.1 + - V2.2 title: Alternative Z Chain diff --git a/legacy_printers/printer_mods/Danowar/TL_2-to-1_Mosquito_Toolhead_Adapter/.metadata.yml b/legacy_printers/printer_mods/Danowar/TL_2-to-1_Mosquito_Toolhead_Adapter/.metadata.yml index 52dca3bf9..fd230f713 100644 --- a/legacy_printers/printer_mods/Danowar/TL_2-to-1_Mosquito_Toolhead_Adapter/.metadata.yml +++ b/legacy_printers/printer_mods/Danowar/TL_2-to-1_Mosquito_Toolhead_Adapter/.metadata.yml @@ -1,12 +1,12 @@ cad: [] description: Mounts the Triangle Labs 2-to-1 adapter directly to the mosquito toolhead images: -- 20191013_202725.jpg -- 20191013_202745.jpg -- 20191013_202806.jpg + - 20191013_202745.jpg + - 20191013_202725.jpg + - 20191013_202806.jpg mod_version: 1 printer_compatibility: -- V1.6 -- V2.1 -- V2.2 + - V1.6 + - V2.1 + - V2.2 title: TL 2-to-1 Mosquito Toolhead Adapter diff --git a/legacy_printers/printer_mods/Fulg/VORON2/PanelDue5/.metadata.yml b/legacy_printers/printer_mods/Fulg/PanelDue5/.metadata.yml similarity index 100% rename from legacy_printers/printer_mods/Fulg/VORON2/PanelDue5/.metadata.yml rename to legacy_printers/printer_mods/Fulg/PanelDue5/.metadata.yml diff --git a/legacy_printers/printer_mods/Fulg/VORON2/PanelDue5/STEP/V2_PanelDue5.step b/legacy_printers/printer_mods/Fulg/PanelDue5/STEP/V2_PanelDue5.step similarity index 100% rename from legacy_printers/printer_mods/Fulg/VORON2/PanelDue5/STEP/V2_PanelDue5.step rename to legacy_printers/printer_mods/Fulg/PanelDue5/STEP/V2_PanelDue5.step diff --git a/legacy_printers/printer_mods/Fulg/VORON2/PanelDue5/STL/V2_PanelDue5_Bottom.stl b/legacy_printers/printer_mods/Fulg/PanelDue5/STL/V2_PanelDue5_Bottom.stl similarity index 100% rename from legacy_printers/printer_mods/Fulg/VORON2/PanelDue5/STL/V2_PanelDue5_Bottom.stl rename to legacy_printers/printer_mods/Fulg/PanelDue5/STL/V2_PanelDue5_Bottom.stl diff --git a/legacy_printers/printer_mods/Fulg/VORON2/PanelDue5/STL/V2_PanelDue5_Top.stl b/legacy_printers/printer_mods/Fulg/PanelDue5/STL/V2_PanelDue5_Top.stl similarity index 100% rename from legacy_printers/printer_mods/Fulg/VORON2/PanelDue5/STL/V2_PanelDue5_Top.stl rename to legacy_printers/printer_mods/Fulg/PanelDue5/STL/V2_PanelDue5_Top.stl diff --git a/legacy_printers/printer_mods/Glowtape/.metadata.yml b/legacy_printers/printer_mods/Glowtape/MKS_GenL_1.0_Mounting_Bracket/.metadata.yml similarity index 100% rename from legacy_printers/printer_mods/Glowtape/.metadata.yml rename to legacy_printers/printer_mods/Glowtape/MKS_GenL_1.0_Mounting_Bracket/.metadata.yml diff --git a/legacy_printers/printer_mods/Glowtape/STEP/MKS_GenL_v1.0_Bracket_A.step b/legacy_printers/printer_mods/Glowtape/MKS_GenL_1.0_Mounting_Bracket/STEP/MKS_GenL_v1.0_Bracket_A.step similarity index 100% rename from legacy_printers/printer_mods/Glowtape/STEP/MKS_GenL_v1.0_Bracket_A.step rename to legacy_printers/printer_mods/Glowtape/MKS_GenL_1.0_Mounting_Bracket/STEP/MKS_GenL_v1.0_Bracket_A.step diff --git a/legacy_printers/printer_mods/Glowtape/STEP/MKS_GenL_v1.0_Bracket_B.step b/legacy_printers/printer_mods/Glowtape/MKS_GenL_1.0_Mounting_Bracket/STEP/MKS_GenL_v1.0_Bracket_B.step similarity index 100% rename from legacy_printers/printer_mods/Glowtape/STEP/MKS_GenL_v1.0_Bracket_B.step rename to legacy_printers/printer_mods/Glowtape/MKS_GenL_1.0_Mounting_Bracket/STEP/MKS_GenL_v1.0_Bracket_B.step diff --git a/legacy_printers/printer_mods/Glowtape/STL/MKS_GenL_v1.0_Bracket_A.stl b/legacy_printers/printer_mods/Glowtape/MKS_GenL_1.0_Mounting_Bracket/STL/MKS_GenL_v1.0_Bracket_A.stl similarity index 100% rename from legacy_printers/printer_mods/Glowtape/STL/MKS_GenL_v1.0_Bracket_A.stl rename to legacy_printers/printer_mods/Glowtape/MKS_GenL_1.0_Mounting_Bracket/STL/MKS_GenL_v1.0_Bracket_A.stl diff --git a/legacy_printers/printer_mods/Glowtape/STL/MKS_GenL_v1.0_Bracket_B.stl b/legacy_printers/printer_mods/Glowtape/MKS_GenL_1.0_Mounting_Bracket/STL/MKS_GenL_v1.0_Bracket_B.stl similarity index 100% rename from legacy_printers/printer_mods/Glowtape/STL/MKS_GenL_v1.0_Bracket_B.stl rename to legacy_printers/printer_mods/Glowtape/MKS_GenL_1.0_Mounting_Bracket/STL/MKS_GenL_v1.0_Bracket_B.stl diff --git a/legacy_printers/printer_mods/JaredC01/Mini_12864_Voron_Knob/.metadata.yml b/legacy_printers/printer_mods/JaredC01/Mini_12864_Voron_Knob/.metadata.yml index 5ff600f04..d1c6c1b94 100644 --- a/legacy_printers/printer_mods/JaredC01/Mini_12864_Voron_Knob/.metadata.yml +++ b/legacy_printers/printer_mods/JaredC01/Mini_12864_Voron_Knob/.metadata.yml @@ -1,11 +1,11 @@ cad: [] description: Upgraded knob for Fystec Mini 12864 RGB LED Display images: -- knobdark.jpg -- knoblight.jpg + - knoblight.jpg + - knobdark.jpg mod_version: 1 printer_compatibility: -- V1.6 -- V2.1 -- V2.2 + - V1.6 + - V2.1 + - V2.2 title: Mini 12864 Voron Knob diff --git a/legacy_printers/printer_mods/Jass_on/Rear_panel_clips/.metadata.yml b/legacy_printers/printer_mods/Jass_on/Rear_panel_clips/.metadata.yml new file mode 100644 index 000000000..43ed47853 --- /dev/null +++ b/legacy_printers/printer_mods/Jass_on/Rear_panel_clips/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: Rear Panel Clips +images: [] +mod_version: 1 +printer_compatibility: + - V2.1 +title: Rear Panel Clips diff --git a/legacy_printers/printer_mods/Jass_on/Rear_Panel_Clips_v2.stl b/legacy_printers/printer_mods/Jass_on/Rear_panel_clips/Rear_Panel_Clips_v2.stl similarity index 100% rename from legacy_printers/printer_mods/Jass_on/Rear_Panel_Clips_v2.stl rename to legacy_printers/printer_mods/Jass_on/Rear_panel_clips/Rear_Panel_Clips_v2.stl diff --git a/legacy_printers/printer_mods/Jass_on/.metadata.yml b/legacy_printers/printer_mods/Jass_on/SKR_1.3_Cooling_Bracket_v2/.metadata.yml similarity index 100% rename from legacy_printers/printer_mods/Jass_on/.metadata.yml rename to legacy_printers/printer_mods/Jass_on/SKR_1.3_Cooling_Bracket_v2/.metadata.yml diff --git a/legacy_printers/printer_mods/Jass_on/SKR_1.3_Cooling_Bracket_v2.stl b/legacy_printers/printer_mods/Jass_on/SKR_1.3_Cooling_Bracket_v2/SKR_1.3_Cooling_Bracket_v2.stl similarity index 100% rename from legacy_printers/printer_mods/Jass_on/SKR_1.3_Cooling_Bracket_v2.stl rename to legacy_printers/printer_mods/Jass_on/SKR_1.3_Cooling_Bracket_v2/SKR_1.3_Cooling_Bracket_v2.stl diff --git a/legacy_printers/printer_mods/JustinVoelker/VORON2/.metadata.yml b/legacy_printers/printer_mods/JustinVoelker/Mains_Plug_Panel_with_RJ45/.metadata.yml similarity index 100% rename from legacy_printers/printer_mods/JustinVoelker/VORON2/.metadata.yml rename to legacy_printers/printer_mods/JustinVoelker/Mains_Plug_Panel_with_RJ45/.metadata.yml diff --git a/legacy_printers/printer_mods/JustinVoelker/VORON2/README.md b/legacy_printers/printer_mods/JustinVoelker/Mains_Plug_Panel_with_RJ45/README.md similarity index 100% rename from legacy_printers/printer_mods/JustinVoelker/VORON2/README.md rename to legacy_printers/printer_mods/JustinVoelker/Mains_Plug_Panel_with_RJ45/README.md diff --git a/legacy_printers/printer_mods/JustinVoelker/VORON2/mains_plug_panel_with_rj45.step b/legacy_printers/printer_mods/JustinVoelker/Mains_Plug_Panel_with_RJ45/mains_plug_panel_with_rj45.step similarity index 100% rename from legacy_printers/printer_mods/JustinVoelker/VORON2/mains_plug_panel_with_rj45.step rename to legacy_printers/printer_mods/JustinVoelker/Mains_Plug_Panel_with_RJ45/mains_plug_panel_with_rj45.step diff --git a/legacy_printers/printer_mods/JustinVoelker/VORON2/mains_plug_panel_with_rj45.stl b/legacy_printers/printer_mods/JustinVoelker/Mains_Plug_Panel_with_RJ45/mains_plug_panel_with_rj45.stl similarity index 100% rename from legacy_printers/printer_mods/JustinVoelker/VORON2/mains_plug_panel_with_rj45.stl rename to legacy_printers/printer_mods/JustinVoelker/Mains_Plug_Panel_with_RJ45/mains_plug_panel_with_rj45.stl diff --git a/legacy_printers/printer_mods/K1JWG/PanelDue7iLogo/.metadata.yml b/legacy_printers/printer_mods/K1JWG/PanelDue7iLogo/.metadata.yml index 7e7ce1586..09e88ddc3 100644 --- a/legacy_printers/printer_mods/K1JWG/PanelDue7iLogo/.metadata.yml +++ b/legacy_printers/printer_mods/K1JWG/PanelDue7iLogo/.metadata.yml @@ -1,9 +1,10 @@ cad: [] description: Custom Voron 2 logo for use as a PanelDue 7i startup splash screen -images: [] +images: + - voron2-logo-paneldue7i.bmp mod_version: 1 printer_compatibility: -- V1.6 -- V2.1 -- V2.2 + - V1.6 + - V2.1 + - V2.2 title: PanelDue 7i Custom Logo diff --git a/legacy_printers/printer_mods/OrkusMG/DragonToolhead/.metadata.yml b/legacy_printers/printer_mods/OrkusMG/DragonToolhead/.metadata.yml new file mode 100644 index 000000000..1ec7339b0 --- /dev/null +++ b/legacy_printers/printer_mods/OrkusMG/DragonToolhead/.metadata.yml @@ -0,0 +1,11 @@ +cad: + - DragonHotendToolheadMountv14.f3d +description: Dragon Toolhead +images: + - Top.jpg + - Back.jpg + - Bottom.jpg + - Front.jpg +mod_version: 1 +printer_compatibility: [] +title: Dragon Toolhead diff --git a/legacy_printers/printer_mods/OrkusMG/VoronFrontSwivelLED/.metadata.yml b/legacy_printers/printer_mods/OrkusMG/VoronFrontSwivelLED/.metadata.yml new file mode 100644 index 000000000..a7a007b37 --- /dev/null +++ b/legacy_printers/printer_mods/OrkusMG/VoronFrontSwivelLED/.metadata.yml @@ -0,0 +1,11 @@ +cad: + - CoverFor5inchLCD.f3d +description: Voron Swivle Front LED Bar +images: + - 1.jpg + - 2.jpg + - 3.jpg + - 4.jpg +mod_version: 1 +printer_compatibility: [] +title: Voron Swivle Front LED Bar diff --git a/legacy_printers/printer_mods/PhilLeMint/c920_Mount/.metadata.yml b/legacy_printers/printer_mods/PhilLeMint/c920_Mount/.metadata.yml index 89914f381..faccbd06e 100644 --- a/legacy_printers/printer_mods/PhilLeMint/c920_Mount/.metadata.yml +++ b/legacy_printers/printer_mods/PhilLeMint/c920_Mount/.metadata.yml @@ -1,11 +1,11 @@ cad: [] description: c920 Camera Mount images: -- c920 mount1.jpg -- c920 mount2.jpg -- Finished c920 Mount.jpg + - Finished c920 Mount.jpg + - c920 mount1.jpg + - c920 mount2.jpg mod_version: 1 printer_compatibility: -- V2.1 -- V2.2 + - V2.1 + - V2.2 title: c920 Mount diff --git a/legacy_printers/printer_mods/README.md b/legacy_printers/printer_mods/README.md index b24102035..7683f79e2 100644 --- a/legacy_printers/printer_mods/README.md +++ b/legacy_printers/printer_mods/README.md @@ -19,11 +19,11 @@ like so: | Creator | Mod title | Description | V1.6 | V2.1 | V2.2 | | --- | --- | --- | --- | --- | --- | -| 3D_Black | [Fan Covers](./3D_Black) | Different fan covers for 40mm fans | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | +| 3D_Black | [Fan Covers](./3D_Black/Fan_Covers) | Different fan covers for 40mm fans | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | | agsolino | [RunOut Filament Holder](./agsolino/RunOutFilamentHolder) | Holder for TriangleLab Runout sensor | :grey_question: | :grey_question: | :heavy_check_mark: | | | [RS-25-5 Rotated](./agsolino/RS25-5-Rotated) | RS-25-5 PSU mount rotated 90 Degrees | :grey_question: | :grey_question: | :heavy_check_mark: | -|Andreq | [Mobius Shaft Jig](./andreq/voron2)|Tool used for grinding flats on a shaft at specific places |:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: | -|Armstr0ng |[Led extrusions mount](./Armstr0ng) | A mount for aluminium LED extrusions with hidden fasteners | :grey_question:|:heavy_check_mark: | :heavy_check_mark:| +|Andreq | [Mobius Shaft Jig](./andreq/Mobius_Shaft_Jig)|Tool used for grinding flats on a shaft at specific places |:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: | +|Armstr0ng |[Led extrusions mount](./Armstr0ng/Led_extrusions_mount) | A mount for aluminium LED extrusions with hidden fasteners | :grey_question:|:heavy_check_mark: | :heavy_check_mark:| | ArmyAg08|[Logitech Camera Mounts](./ArmyAg08/Logitech_C270_Mounts) |Different Logitech camera mounts, attached to the extrusions. Fits C270 and C310 |:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: | | | [Corner Panel Clip](./ArmyAg08/Panels)|Corner panel clip that fit 3mm or 1/8" panels with foam tape | :x:|:heavy_check_mark: | :heavy_check_mark:| | Badnoob |[Serial Plate](./Badnoob/Serial_Plate) |Modified skirt piece to display your serial number|:x:|:x:|:heavy_check_mark:| @@ -47,7 +47,7 @@ like so: | |[Tablet mount](./Danowar/Tablet_Mount)|Detachable mount for tablet using magnets |:heavy_check_mark: |:heavy_check_mark: | :heavy_check_mark: | | |[V2.2 Wrench](./Danowar/V2.2_Wrench)|3 sided wrench for 2.2 bearing caps and panel clips |:x: |:x: | :heavy_check_mark: | | |[Alternative Z Chain](./Danowar/AltZChain)|Alternative mounting for Z-Axis zipchain|:x: |:heavy_check_mark: | :heavy_check_mark: | -| daveidmx| [30mm Fan Adapter](./daveidmx/VORON2)|30mm Fan Adapter | :grey_question:| :grey_question:|:grey_question: | +| daveidmx| [30mm Fan Adapter](./daveidmx/30mm_Fan_Adapter)|30mm Fan Adapter | :grey_question:| :grey_question:|:grey_question: | |Dunar |[Panel Rest](./Dunar/Panel_Rest) | External panel holder | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: | |etherwalker |[Pi Zero Camera Mount](./etherwalker/Pi_Zero_Camera_Mount) | Pi Zero Camera Mount| :grey_question:| :grey_question:|:grey_question: | |exquyre |[Anet 12864 Display](./exquyre/Anet_12864_display) | Case for Anet 12864 LCD display|:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: | @@ -55,13 +55,13 @@ like so: | |[Cable Cover Insert](./exquyre/cable_cover) |Room for 3-4 20AWG wires | :grey_question:| :grey_question:|:grey_question: | | |[Einsy + RAMPS Combo](./exquyre/einsy+ramps) |Mounting bracket for 1 Einsy and 1 RAMPs |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: | |FHeilmann |[Voron 2.1 5mm Parts](./FHeilmann/VORON2.1_5mm_parts) |Parts modified for extrusions with 5mm gap. |:x: |:heavy_check_mark: | :x:| -| Fulg| [PanelDue5 LCD Mount](./Fulg/VORON2/PanelDue5)|Mount for the PanelDue5 LCD display |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: | +| Fulg| [PanelDue5 LCD Mount](./Fulg/PanelDue5)|Mount for the PanelDue5 LCD display |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: | |GSL12 |[WAGO 221 Mounts](./GSL12/wago_221_mount) | Wago 221 mounts for the electronics bay |:heavy_check_mark: |:heavy_check_mark: | :heavy_check_mark:| |Gamsche | [Keystone Skirt Panel](./Gamsche/skirt_keystone)| 25mm skirt panel with integrated keystone jack. Use with 50mm smaller adjacent skirts for proper fit. |:grey_question: |:grey_question: |:heavy_check_mark:| -|Glowtape | [MKS GenL 1.0 Mounting Bracket](./Glowtape)| MKS GenL 1.0 Mounting Bracket|:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark:| +|Glowtape | [MKS GenL 1.0 Mounting Bracket](./Glowtape/MKS_GenL_1.0_Mounting_Bracket)| MKS GenL 1.0 Mounting Bracket|:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark:| |GustavTheMighty | [4.3 PanelDue Case](./GustavtheMighty/4.3-Paneldue_Case)|Case/mount for the 4.3 PanelDue LCD Display |:heavy_check_mark: | :heavy_check_mark: |:heavy_check_mark: | |Iakabos| [Mini12864 Display Mount](./Iakabos/Mini12864_display_mount)|Case and mounting arms for a Fysetc Mini12864 display |:grey_question: |:heavy_check_mark: |:heavy_check_mark: | -| Hackdoggo| [BMGobius](./hackdoggo/v2/bmgobius)|Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears |:heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | +| Hackdoggo| [BMGobius](./hackdoggo/BMGobius)|Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears |:heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | |hiemmer | [Tool Holders](./hiemmer/Tool_Holders)| Tool holder for calipers, screwdriver etc| :grey_question:| :grey_question:|:grey_question: | |JaredC01 | [Mini 12864 Voron Knob](./JaredC01/Mini_12864_Voron_Knob) | Upgraded knob for Fystec Mini 12864 RGB LED Display | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | | | [Keystone Power Panel](./JaredC01/Keystone_Power_Panel)| Power Panel with 1 or 2 Keystone Jacks | :x: | :heavy_check_mark: | :heavy_check_mark: | @@ -76,8 +76,8 @@ like so: | | [Simple tool holder](./Jasperkm/Simple_tool_holder)| Holder for 3 small tools using magnets | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | | | [Skirt mods](./Jasperkm/Skirt_mods)| Some mods the skirts for fans and a clock | :x: | :heavy_check_mark: | :heavy_check_mark: | |Jass_on |[Tempered glass clips/handle](./Jass_on/Voron_2.1.1_Tempered_Glass) |Panel clips and handles for using tempered glass side panels | :x: | :heavy_check_mark: | :grey_question:| -| | [Rear panel clips](./Jass_on) | Rear Panel Clips| :x: | :heavy_check_mark: | :grey_question:| -| | [SKR 1.3 Cooling bracket](./Jass_on)|SKR 1.3 mount with built in 40mm fan mount |:heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | +| | [Rear panel clips](./Jass_on/Rear_panel_clips) | Rear Panel Clips| :x: | :heavy_check_mark: | :grey_question:| +| | [SKR 1.3 Cooling bracket](./Jass_on/SKR_1.3_Cooling_Bracket_v2)|SKR 1.3 mount with built in 40mm fan mount |:heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | |JeJeff |[2020 Extrusion slot cover](./JeJeff/VORON2.1/2020_5mm_Slot_Cover) |Slot covers for extrusions with 5mm slot width |:heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | | |[Cable Tie Mount](./JeJeff/VORON2.1/Cable_Tie_Mount) |Cable tie mounts for 4mm cable ties |:heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | | |[Main Plug Panel](./JeJeff/VORON2.1/Mains_Plug_Panel_with_RJ45_Panel_Mount) |Main Plug Panel modified to hold a RJ45 ethernet socket |:heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | @@ -86,7 +86,7 @@ like so: | |[Left handed RAMPS mount](./Jink/VORON_2.1/Left_Handed_Ramps_Mount) | Mirrored RAMPS bracket|:heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | | | [Spool holder with scale](./Jink/VORON_2.1/Spool_Holder_With_Scale)|Spool holder with scale | :x: | :heavy_check_mark: | :grey_question: | | |[WAGO Mount](./Jink/VORON_2.1/WAGO_Mount) |Mount for 3x WAGO connectors |:heavy_check_mark: | :heavy_check_mark:| :heavy_check_mark:| -| JustinVoelker|[Mains Plug Panel with RJ45](./JustinVoelker/VORON2) | Mains plug panel with ethernet cutout|:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: | +| JustinVoelker|[Mains Plug Panel with RJ45](./JustinVoelker/Mains_Plug_Panel_with_RJ45) | Mains plug panel with ethernet cutout|:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: | | K1JWG|[PanelDue 7i Custom Logo](./K1JWG/PanelDue7iLogo) |Custom Voron 2 logo for use as a PanelDue 7i startup splash screen |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: | |manfre |[Openbuild chain ends](./manfre/cable_chains) |Cable chain ends to use off the shelf chains with Voron parts |:x: |:heavy_check_mark: |:heavy_check_mark: | |masgar |[VoltAmpMeter panel insert](./masgar/VoltAmpMeter_Panel_Insert) | Mounting panel for VoltAmpMeter | :heavy_check_mark: |:x: |:x: | @@ -98,15 +98,19 @@ like so: |Nashuar |[IKEA LEDBERG Spot Mount](./Nashuar/LEDBERG_LED_Mount) |LED Spot mount for IKEA LEDBERG |:grey_question: |:heavy_check_mark: |:heavy_check_mark: | | |[WaveShare 7" Screen Mount](./Nashuar/7.0-WaveShare_Screen) |Display Case for 7" Waveshare LCD |:grey_question: |:grey_question: |:heavy_check_mark: | |nemgrea |[Magnetic Split Front Door](./nemgrea/magnetic_split_front_door) |Hinges, handles and magnet mounts for creating a split front door panel |:x: |:heavy_check_mark: |:grey_question: | +| |[5mm Coroplast Hardware](./nemgrea/5mm%20coroplast%20hardware/) |5mm Coroplast Hardware |:grey_question: |:grey_question: |:grey_question: | +| |[Toolhead Indicator Mounts](./nemgrea/toolhead%20indicator%20mounts/) |Toolhead Indicator Mounts |:grey_question: |:grey_question: |:grey_question: | |OrkusMG | [Waveshare 5 Inch LCD Cover](./OrkusMG/Waveshare5inchHDMILCDscreenCover)|Display Cover for the Waveshare 5 inch HDMI LCD screen |:heavy_check_mark: |:heavy_check_mark: | :heavy_check_mark:| +| | [Dragon Toolhead](./OrkusMG/DragonToolhead)|Dragon Toolhead |:grey_question: |:grey_question: |:grey_question:| +| | [Voron Swivle Front LED Bar](./OrkusMG/VoronFrontSwivelLED)|Voron Swivle Front LED Bar |:grey_question: |:grey_question: |:grey_question:| |PhilLeMint | [c920 Mount](./PhilLeMint/c920_Mount/) | c920 Camera Mount | :grey_question: | :heavy_check_mark: | :heavy_check_mark: | | |[Panel Mounting](./PhilLeMint/Panel_Mounting/) | Panel Clips for 3/32" Foam Tape |:grey_question: | :heavy_check_mark: |:heavy_check_mark: | | |[Dual LED Light Mount](./PhilLeMint/Dual_LED_Light_Mount/) | Mounts for Dual LED Bar |:grey_question: | :heavy_check_mark: |:heavy_check_mark: | | |[Velocity Stack](./PhilLeMint/Velocity_Stack/) | Velocity Stack Fan Cover |:grey_question: | :heavy_check_mark: |:heavy_check_mark: | | |[Indicator Mount](./PhilLeMint/Indicator_Mount/) | Mount for Indicator |:grey_question: | :heavy_check_mark: |:heavy_check_mark: | -|pnokel |[Cable Zipper](./pnokel) |Small mount to secure wires with zip ties |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: | -| |[Coroplast holders](./pnokel) | Different coroplast holders for added support |:x:| :heavy_check_mark:|:grey_question: | -| |[Toothed Idler](./pnokel) |14.5mm toothed idler | :x: | :x: |:x:| +|pnokel |[Cable Zipper](./pnokel/Cable_Zipper) |Small mount to secure wires with zip ties |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: | +| |[Coroplast holders](./pnokel/Coroplast_holders) | Different coroplast holders for added support |:x:| :heavy_check_mark:|:grey_question: | +| |[Toothed Idler](./pnokel/Toothed_Idler) |14.5mm toothed idler | :x: | :x: |:x:| | przybybr|[V2.1 Omron Mount](./przybybr/V2_1OmronMount/) | Mount for Omron probe in V2.1 | :grey_question:|:heavy_check_mark: | :x:| | Railgunner|[Dual Direct Drive X Carriage](./Railgunner/10mmBMGx2) |Dual direct drive using 2x Bondtech BMG | :grey_question:|:grey_question: |:grey_question: | |Randommen96 | [LCD bracket extended](./randommen96/LCD_bracket_extended/) | LCD bracket extended for 6mm panels | :grey_question: | :grey_question: | :heavy_check_mark: | @@ -117,13 +121,13 @@ like so: | |[Minima](./schlank/minima) | Minimalistic Fysetc Mini12864 display mount | :x:|:grey_question:|:heavy_check_mark: | | Seamen|[RAMPS Extender Holder](./Seamen/RAMPS-Extender_holder) |Mount for RAMPS board with the stepper extender |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: | |Slidr | [Panzer Chain](./Slidr/PanzerChain) | Alternative energie chain | :grey_question: |:grey_question: |:heavy_check_mark: | -|Sparreau | [5V Power Supply Mount](./Sparreau)|5V Power Supply Mount |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: | -| |[FSR Circuit Mount](./Sparreau) |Bracket for mounting the FSR PCB. |:x: |:heavy_check_mark: |:x: | -| | [Z Rail Stop](./Sparreau)|Z Rail Stop | :x: |:heavy_check_mark:| :heavy_check_mark:| -| | [Bed Extrusion Spacer](./Sparreau)|Bed Extrusion Spacer |:x: |:heavy_check_mark:| :heavy_check_mark:| -| |[Dial Indicator Fan Mount](./Sparreau) | Dial Indicator Fan Mount| :grey_question:| :grey_question:|:grey_question: | -| |[Mains Plug Panel Parametric](./Sparreau) |Scalable mains plug panel with small modifications |:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:| -| |[Z Idler Frame Extra Tab](./Sparreau) |An extra tab added to the Z idler to prevent sagging / rotation | :x:|:heavy_check_mark: |:x: | +|Sparreau | [5V Power Supply Mount](./Sparreau/5v_psupply_mount)|5V Power Supply Mount |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: | +| |[FSR Circuit Mount](./Sparreau/FSR_circuit_mount) |Bracket for mounting the FSR PCB. |:x: |:heavy_check_mark: |:x: | +| | [Z Rail Stop](./Sparreau/z_rail_stop)|Z Rail Stop | :x: |:heavy_check_mark:| :heavy_check_mark:| +| | [Bed Extrusion Spacer](./Sparreau/bed_extrusion_spacer)|Bed Extrusion Spacer |:x: |:heavy_check_mark:| :heavy_check_mark:| +| |[Dial Indicator Fan Mount](./Sparreau/dial_indicator_fan_mount) | Dial Indicator Fan Mount| :grey_question:| :grey_question:|:grey_question: | +| |[Mains Plug Panel Parametric](./Sparreau/mains_plug_panel) |Scalable mains plug panel with small modifications |:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:| +| |[Z Idler Frame Extra Tab](./Sparreau/z_idler_frame_extra_tab/) |An extra tab added to the Z idler to prevent sagging / rotation | :x:|:heavy_check_mark: |:x: | | sporadic | [10x15 Chain Z Mounts](./sporadic/10x15_Chain_Z_Mounts) | End Z mounts for 10x15 Befenybay Drag Chain | :grey_question: | :heavy_check_mark: | :grey_question: | | | [30A Relay Mount](./sporadic/30A_Relay_Mount) | Mount for a 30A relay module available on Amazon | :grey_question: | :heavy_check_mark: | :heavy_check_mark: | | | [Dual RS-25 Mount](./sporadic/Dual_RS-25_Mount) | Dual mount for side by side RS-25 supplies | :grey_question: | :heavy_check_mark: | :heavy_check_mark: | @@ -131,7 +135,7 @@ like so: | | [Wago 221-415 Mount](./sporadic/Wago_221_Mounts) | Mount for a single Wago 221-415 | :grey_question: | :heavy_check_mark: | :heavy_check_mark: | |Stephan |[M12 Probeholder](./Stephan/M12_probeholder) | Drop in replacement of the stock probe to a M12|:grey_question: |:heavy_check_mark: | :grey_question:| | |[BlTouch Mount](./Stephan/bltouch_mount) | Drop in replacement of the stock probe to a BLTouch|:grey_question: |:heavy_check_mark: | :grey_question:| -|steve450 |[Corner Brackets](./steve450/Voron2.1) | Corner brackets preventing rotation of the extrusions, and stiffening the joints. Also covers the Z-belt hole for improved aesthetics| :grey_question:| :heavy_check_mark:|:grey_question: | +|steve450 |[Corner Brackets](./steve450/Corner_Brackets) | Corner brackets preventing rotation of the extrusions, and stiffening the joints. Also covers the Z-belt hole for improved aesthetics| :grey_question:| :heavy_check_mark:|:grey_question: | | synfinatic|[Duet Fan Mount](./synfinatic/Duet-Fan-Mount) |Duet/Duex fan mount with air vents directly above the steppers to increase airflow |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: | | |[E-Stop Switch](./synfinatic/E-Stop-Switch) |Mount for emergency button attached to the top of the printer |:x: | :heavy_check_mark:|:grey_question: | | | [Filament DryBox](./synfinatic/Filament-DryBox)|Mount for filament drybox attached to the side of the printer |:x: | :heavy_check_mark:|:grey_question: | @@ -143,10 +147,10 @@ like so: |warriorofwire | [Openbuilds Drag Chain 2.1](./warriorofwire/openbuilds_drag_chain_2.1)|Off-the-shelf, cheap, snap opening drag chain for gantry wiring and protecting wires down to the deck |:x: | :heavy_check_mark: | :x: | | | [Openbuilds Drag Chain 2.2](./warriorofwire/openbuilds_drag_chain_2.2)|Off-the-shelf, cheap, snap opening drag chain for gantry wiring and protecting wires down to the deck |:x: | :x: | :heavy_check_mark: | | | [Direct Drive BMG-m mount](./warriorofwire/bmg_direct_drive)| Open toolhead mounting plans for Bondtech BMG-m and Mosquito direct drive combo|:grey_question: |:heavy_check_mark:|:heavy_check_mark: | -| wile.e.coyote| [Coroplast Support](./wile.e.coyote)|Support for the coroplast to prevent sagging | :x: |:heavy_check_mark: |:grey_question: | -| |[Dual Buck Bracket](./wile.e.coyote) |Mounting bracket for 2 buck converters | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: | -| |[Nozzle Scrubber Mount](./wile.e.coyote) | Mount for brass brush. Used for cleaning nozzle before printing |:x: | :heavy_check_mark: |:heavy_check_mark: | -| | [Wago Mounts](./wile.e.coyote) | Different mounts for Wago connectors | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: | -| Xile | [AfterBurner Umbilical](./XIle) | Supports a umbilical setup, on AB, taking the strain off connectors | :grey_question: | :grey_question: | :heavy_check_mark: | +| wile.e.coyote| [Coroplast Support](./wile.e.coyote/coroplast_support)|Support for the coroplast to prevent sagging | :x: |:heavy_check_mark: |:grey_question: | +| |[Dual Buck Bracket](./wile.e.coyote/dual_buck_bracket) |Mounting bracket for 2 buck converters | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: | +| |[Nozzle Scrubber Mount](./wile.e.coyote/nozzle_scrubber_mount) | Mount for brass brush. Used for cleaning nozzle before printing |:x: | :heavy_check_mark: |:heavy_check_mark: | +| | [Wago Mounts](./wile.e.coyote/wago_mounts) | Different mounts for Wago connectors | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: | +| Xile | [AfterBurner Umbilical](./XIle/Afterburner_Umbilical) | Supports a umbilical setup, on AB, taking the strain off connectors | :grey_question: | :grey_question: | :heavy_check_mark: | --- diff --git a/legacy_printers/printer_mods/Slidr/PanzerChain/.metadata.yml b/legacy_printers/printer_mods/Slidr/PanzerChain/.metadata.yml index f1e2354ef..e8ae0a2df 100644 --- a/legacy_printers/printer_mods/Slidr/PanzerChain/.metadata.yml +++ b/legacy_printers/printer_mods/Slidr/PanzerChain/.metadata.yml @@ -1,24 +1,24 @@ cad: [] description: Alternative energie chain images: -- 01_Link-Assembly.PNG -- 02_XY-Parts.PNG -- 03_XY-Part-Tolerance_Explanation.PNG -- 04_Z-Assembly.PNG -- gallery_printer_examples/aerosov_V2.2_petg_clear.jpg -- gallery_printer_examples/Calozor_V2.x-petg_1.jpeg -- gallery_printer_examples/Calozor_V2.x-petg_2.jpg -- gallery_printer_examples/eraser_V2.2_fx_redline-abs-red.jpg -- gallery_printer_examples/slidr_V2.2_AfterBurnerBeta_esunABS+_black_crappyphone_pic.jpg -- themes/Example_1.jpg -- themes/Example_2.jpg -- themes/Example_3.jpg -- themes/Example_4.jpg -- themes/Example_5.jpg -- themes/Example_6.jpg -- themes/Example_7.jpg -- themes/Example_8.jpg + - themes/Example_1.jpg + - 01_Link-Assembly.PNG + - 02_XY-Parts.PNG + - 03_XY-Part-Tolerance_Explanation.PNG + - 04_Z-Assembly.PNG + - gallery_printer_examples/aerosov_V2.2_petg_clear.jpg + - gallery_printer_examples/Calozor_V2.x-petg_1.jpeg + - gallery_printer_examples/Calozor_V2.x-petg_2.jpg + - gallery_printer_examples/eraser_V2.2_fx_redline-abs-red.jpg + - gallery_printer_examples/slidr_V2.2_AfterBurnerBeta_esunABS+_black_crappyphone_pic.jpg + - themes/Example_2.jpg + - themes/Example_3.jpg + - themes/Example_4.jpg + - themes/Example_5.jpg + - themes/Example_6.jpg + - themes/Example_7.jpg + - themes/Example_8.jpg mod_version: 1 printer_compatibility: -- V2.2 + - V2.2 title: Panzer Chain diff --git a/legacy_printers/printer_mods/Sparreau/.metadata.yml b/legacy_printers/printer_mods/Sparreau/.metadata.yml deleted file mode 100644 index 5c22722d4..000000000 --- a/legacy_printers/printer_mods/Sparreau/.metadata.yml +++ /dev/null @@ -1,13 +0,0 @@ -cad: -- 5v_psupply_mount.f3d -- bed_extrusion_spacer_parametric.f3d -- dial_indicator_fan_mount.f3d -- FSR_circuit_mount.f3d -- mains_plug_panel-parametric.f3d -- z_rail_stop_PARAMETRIC_x4.f3d -description: An extra tab added to the Z idler to prevent sagging / rotation -images: [] -mod_version: 1 -printer_compatibility: -- V2.1 -title: Z Idler Frame Extra Tab diff --git a/legacy_printers/printer_mods/Sparreau/5v_psupply_mount/.metadata.yml b/legacy_printers/printer_mods/Sparreau/5v_psupply_mount/.metadata.yml new file mode 100644 index 000000000..471cc923e --- /dev/null +++ b/legacy_printers/printer_mods/Sparreau/5v_psupply_mount/.metadata.yml @@ -0,0 +1,10 @@ +cad: + - 5v_psupply_mount.f3d +description: 5V Power Supply Mount +images: [] +mod_version: 1 +printer_compatibility: + - V1.6 + - V2.1 + - V2.2 +title: 5V Power Supply Mount diff --git a/legacy_printers/printer_mods/Sparreau/5v_psupply_mount.f3d b/legacy_printers/printer_mods/Sparreau/5v_psupply_mount/5v_psupply_mount.f3d similarity index 100% rename from legacy_printers/printer_mods/Sparreau/5v_psupply_mount.f3d rename to legacy_printers/printer_mods/Sparreau/5v_psupply_mount/5v_psupply_mount.f3d diff --git a/legacy_printers/printer_mods/Sparreau/5v_psupply_mount.stl b/legacy_printers/printer_mods/Sparreau/5v_psupply_mount/5v_psupply_mount.stl similarity index 100% rename from legacy_printers/printer_mods/Sparreau/5v_psupply_mount.stl rename to legacy_printers/printer_mods/Sparreau/5v_psupply_mount/5v_psupply_mount.stl diff --git a/legacy_printers/printer_mods/Sparreau/5v_psupply_mount/README.md b/legacy_printers/printer_mods/Sparreau/5v_psupply_mount/README.md new file mode 100644 index 000000000..e706a9a86 --- /dev/null +++ b/legacy_printers/printer_mods/Sparreau/5v_psupply_mount/README.md @@ -0,0 +1,2 @@ +5v_psupply_mount
+This fits the 5V power supply from AliExpress. https://www.aliexpress.com/item/DC-6V-40V-To-5V-3A-Double-USB-Charge-DC-DC-Step-down-Converter-Module/32664778995.html diff --git a/legacy_printers/printer_mods/Sparreau/FSR_circuit_mount/.metadata.yml b/legacy_printers/printer_mods/Sparreau/FSR_circuit_mount/.metadata.yml new file mode 100644 index 000000000..7f98e5c0d --- /dev/null +++ b/legacy_printers/printer_mods/Sparreau/FSR_circuit_mount/.metadata.yml @@ -0,0 +1,8 @@ +cad: + - FSR_circuit_mount.f3d +description: Bracket for mounting the FSR PCB +images: [] +mod_version: 1 +printer_compatibility: + - V2.1 +title: FSR Circuit Mount diff --git a/legacy_printers/printer_mods/Sparreau/FSR_circuit_mount.f3d b/legacy_printers/printer_mods/Sparreau/FSR_circuit_mount/FSR_circuit_mount.f3d similarity index 100% rename from legacy_printers/printer_mods/Sparreau/FSR_circuit_mount.f3d rename to legacy_printers/printer_mods/Sparreau/FSR_circuit_mount/FSR_circuit_mount.f3d diff --git a/legacy_printers/printer_mods/Sparreau/FSR_circuit_mount.stl b/legacy_printers/printer_mods/Sparreau/FSR_circuit_mount/FSR_circuit_mount.stl similarity index 100% rename from legacy_printers/printer_mods/Sparreau/FSR_circuit_mount.stl rename to legacy_printers/printer_mods/Sparreau/FSR_circuit_mount/FSR_circuit_mount.stl diff --git a/legacy_printers/printer_mods/Sparreau/FSR_circuit_mount/README.md b/legacy_printers/printer_mods/Sparreau/FSR_circuit_mount/README.md new file mode 100644 index 000000000..b2759fb90 --- /dev/null +++ b/legacy_printers/printer_mods/Sparreau/FSR_circuit_mount/README.md @@ -0,0 +1,2 @@ +FSR_circuit_mount
+This fits the sensor module used in the FSR circuit. Mine are from Amazon, but it appears to be the same board used in the AliExpress sensor modules. https://www.amazon.com/gp/product/B07B94Q1C8/ diff --git a/legacy_printers/printer_mods/Sparreau/README.md b/legacy_printers/printer_mods/Sparreau/README.md deleted file mode 100644 index 59e836e00..000000000 --- a/legacy_printers/printer_mods/Sparreau/README.md +++ /dev/null @@ -1,22 +0,0 @@ -Sparreau's Mods - -5v_psupply_mount
-This fits the 5V power supply from AliExpress. https://www.aliexpress.com/item/DC-6V-40V-To-5V-3A-Double-USB-Charge-DC-DC-Step-down-Converter-Module/32664778995.html - -FSR_circuit_mount
-This fits the sensor module used in the FSR circuit. Mine are from Amazon, but it appears to be the same board used in the AliExpress sensor modules. https://www.amazon.com/gp/product/B07B94Q1C8/ - -\_z_rail_stop_(top/bottom)_x4
-I made these primarily to set the 25mm spacing of the Z linear bearing rails from the bottom extrusion of the printer. While I was at it, I re-shaped it to mate up to the rail a bit better. - -bed_extrusion_spacer_parametric
-These are an aid to set the spacing of the bed rails. To go between 150mm center spaced rails you need 130mm spacers. You'll have to calculate the outer spacers for your frame size. - -dial_indicator_fan_mount
-This fits a dial indicator from Harbor Freight with a 9.5mm shank along with a 10mm thick extruder fan. A clothes pin works great for holding the indicator pin up when not in use. MAKE SURE YOU DO NOT CRASH IT! - -mains_plug_panel-parametric
-This is an alternative mains plug panel for which you can set the size. I made this because my frame is not a standard size. The mains panel fills the gap so I can use standard (250/300/350) side skirts. I slightly enlarged the opening for the IEC320 switch socket, as mine did not fit the original. I also added recessed slots for the retention clips on the IEC320 switch socket. - -z_idler_frame_(a/b)_EXTRA-TAB_x2
-I had trouble keeping my z idler frames from sagging while trying to tension the belts. This part includes an extra tab to secure the frame prior to tightening the idler screws. diff --git a/legacy_printers/printer_mods/Sparreau/bed_extrusion_spacer/.metadata.yml b/legacy_printers/printer_mods/Sparreau/bed_extrusion_spacer/.metadata.yml new file mode 100644 index 000000000..9d05a5ddb --- /dev/null +++ b/legacy_printers/printer_mods/Sparreau/bed_extrusion_spacer/.metadata.yml @@ -0,0 +1,9 @@ +cad: + - bed_extrusion_spacer_parametric.f3d +description: Bed Extrusion Spacer +images: [] +mod_version: 1 +printer_compatibility: + - V2.1 + - V2.2 +title: Bed Extrusion Spacer diff --git a/legacy_printers/printer_mods/Sparreau/bed_extrusion_spacer/README.md b/legacy_printers/printer_mods/Sparreau/bed_extrusion_spacer/README.md new file mode 100644 index 000000000..94ea2c185 --- /dev/null +++ b/legacy_printers/printer_mods/Sparreau/bed_extrusion_spacer/README.md @@ -0,0 +1,2 @@ +bed_extrusion_spacer_parametric
+These are an aid to set the spacing of the bed rails. To go between 150mm center spaced rails you need 130mm spacers. You'll have to calculate the outer spacers for your frame size. diff --git a/legacy_printers/printer_mods/Sparreau/bed_extrusion_spacer_parametric.f3d b/legacy_printers/printer_mods/Sparreau/bed_extrusion_spacer/bed_extrusion_spacer_parametric.f3d similarity index 100% rename from legacy_printers/printer_mods/Sparreau/bed_extrusion_spacer_parametric.f3d rename to legacy_printers/printer_mods/Sparreau/bed_extrusion_spacer/bed_extrusion_spacer_parametric.f3d diff --git a/legacy_printers/printer_mods/Sparreau/dial_indicator_fan_mount/.metadata.yml b/legacy_printers/printer_mods/Sparreau/dial_indicator_fan_mount/.metadata.yml new file mode 100644 index 000000000..7b8c7ccc5 --- /dev/null +++ b/legacy_printers/printer_mods/Sparreau/dial_indicator_fan_mount/.metadata.yml @@ -0,0 +1,7 @@ +cad: + - dial_indicator_fan_mount.f3d +description: Dial Indicator Fan Mount +images: [] +mod_version: 1 +printer_compatibility: [] +title: Dial Indicator Fan Mount diff --git a/legacy_printers/printer_mods/Sparreau/dial_indicator_fan_mount/README.md b/legacy_printers/printer_mods/Sparreau/dial_indicator_fan_mount/README.md new file mode 100644 index 000000000..2169d9a8b --- /dev/null +++ b/legacy_printers/printer_mods/Sparreau/dial_indicator_fan_mount/README.md @@ -0,0 +1,2 @@ +dial_indicator_fan_mount
+This fits a dial indicator from Harbor Freight with a 9.5mm shank along with a 10mm thick extruder fan. A clothes pin works great for holding the indicator pin up when not in use. MAKE SURE YOU DO NOT CRASH IT! diff --git a/legacy_printers/printer_mods/Sparreau/dial_indicator_fan_mount.f3d b/legacy_printers/printer_mods/Sparreau/dial_indicator_fan_mount/dial_indicator_fan_mount.f3d similarity index 100% rename from legacy_printers/printer_mods/Sparreau/dial_indicator_fan_mount.f3d rename to legacy_printers/printer_mods/Sparreau/dial_indicator_fan_mount/dial_indicator_fan_mount.f3d diff --git a/legacy_printers/printer_mods/Sparreau/dial_indicator_fan_mount.stl b/legacy_printers/printer_mods/Sparreau/dial_indicator_fan_mount/dial_indicator_fan_mount.stl similarity index 100% rename from legacy_printers/printer_mods/Sparreau/dial_indicator_fan_mount.stl rename to legacy_printers/printer_mods/Sparreau/dial_indicator_fan_mount/dial_indicator_fan_mount.stl diff --git a/legacy_printers/printer_mods/Sparreau/mains_plug_panel/.metadata.yml b/legacy_printers/printer_mods/Sparreau/mains_plug_panel/.metadata.yml new file mode 100644 index 000000000..8c8a6227e --- /dev/null +++ b/legacy_printers/printer_mods/Sparreau/mains_plug_panel/.metadata.yml @@ -0,0 +1,10 @@ +cad: + - mains_plug_panel-parametric.f3d +description: Scalable mains plug panel with small modifications +images: [] +mod_version: 1 +printer_compatibility: + - V1.6 + - V2.1 + - V2.2 +title: Mains Plug Panel Parametric diff --git a/legacy_printers/printer_mods/Sparreau/mains_plug_panel/README.md b/legacy_printers/printer_mods/Sparreau/mains_plug_panel/README.md new file mode 100644 index 000000000..5da638a79 --- /dev/null +++ b/legacy_printers/printer_mods/Sparreau/mains_plug_panel/README.md @@ -0,0 +1,2 @@ +mains_plug_panel-parametric
+This is an alternative mains plug panel for which you can set the size. I made this because my frame is not a standard size. The mains panel fills the gap so I can use standard (250/300/350) side skirts. I slightly enlarged the opening for the IEC320 switch socket, as mine did not fit the original. I also added recessed slots for the retention clips on the IEC320 switch socket. diff --git a/legacy_printers/printer_mods/Sparreau/mains_plug_panel-parametric.f3d b/legacy_printers/printer_mods/Sparreau/mains_plug_panel/mains_plug_panel-parametric.f3d similarity index 100% rename from legacy_printers/printer_mods/Sparreau/mains_plug_panel-parametric.f3d rename to legacy_printers/printer_mods/Sparreau/mains_plug_panel/mains_plug_panel-parametric.f3d diff --git a/legacy_printers/printer_mods/Sparreau/z_idler_frame_extra_tab/.metadata.yml b/legacy_printers/printer_mods/Sparreau/z_idler_frame_extra_tab/.metadata.yml new file mode 100644 index 000000000..1a2da490c --- /dev/null +++ b/legacy_printers/printer_mods/Sparreau/z_idler_frame_extra_tab/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: An extra tab added to the Z idler to prevent sagging / rotation +images: [] +mod_version: 1 +printer_compatibility: + - V2.1 +title: Z Idler Frame Extra Tab diff --git a/legacy_printers/printer_mods/Sparreau/z_idler_frame_extra_tab/README.md b/legacy_printers/printer_mods/Sparreau/z_idler_frame_extra_tab/README.md new file mode 100644 index 000000000..a22878b49 --- /dev/null +++ b/legacy_printers/printer_mods/Sparreau/z_idler_frame_extra_tab/README.md @@ -0,0 +1,4 @@ +Sparreau's Mods + +z_idler_frame_(a/b)\_EXTRA-TAB_x2
+I had trouble keeping my z idler frames from sagging while trying to tension the belts. This part includes an extra tab to secure the frame prior to tightening the idler screws. diff --git a/legacy_printers/printer_mods/Sparreau/z_idler_frame_a_EXTRA-TAB_x2.stl b/legacy_printers/printer_mods/Sparreau/z_idler_frame_extra_tab/z_idler_frame_a_EXTRA-TAB_x2.stl similarity index 100% rename from legacy_printers/printer_mods/Sparreau/z_idler_frame_a_EXTRA-TAB_x2.stl rename to legacy_printers/printer_mods/Sparreau/z_idler_frame_extra_tab/z_idler_frame_a_EXTRA-TAB_x2.stl diff --git a/legacy_printers/printer_mods/Sparreau/z_idler_frame_b_EXTRA-TAB_x2.stl b/legacy_printers/printer_mods/Sparreau/z_idler_frame_extra_tab/z_idler_frame_b_EXTRA-TAB_x2.stl similarity index 100% rename from legacy_printers/printer_mods/Sparreau/z_idler_frame_b_EXTRA-TAB_x2.stl rename to legacy_printers/printer_mods/Sparreau/z_idler_frame_extra_tab/z_idler_frame_b_EXTRA-TAB_x2.stl diff --git a/legacy_printers/printer_mods/Sparreau/z_rail_stop/.metadata.yml b/legacy_printers/printer_mods/Sparreau/z_rail_stop/.metadata.yml new file mode 100644 index 000000000..2da57c71f --- /dev/null +++ b/legacy_printers/printer_mods/Sparreau/z_rail_stop/.metadata.yml @@ -0,0 +1,9 @@ +cad: + - z_rail_stop_PARAMETRIC_x4.f3d +description: Z Rail Stop +images: [] +mod_version: 1 +printer_compatibility: + - V2.1 + - V2.2 +title: Z Rail Stop diff --git a/legacy_printers/printer_mods/Sparreau/z_rail_stop/README.md b/legacy_printers/printer_mods/Sparreau/z_rail_stop/README.md new file mode 100644 index 000000000..cb2aa1126 --- /dev/null +++ b/legacy_printers/printer_mods/Sparreau/z_rail_stop/README.md @@ -0,0 +1,2 @@ +\_z*rail_stop*(top/bottom)\_x4
+I made these primarily to set the 25mm spacing of the Z linear bearing rails from the bottom extrusion of the printer. While I was at it, I re-shaped it to mate up to the rail a bit better. diff --git a/legacy_printers/printer_mods/Sparreau/z_rail_stop_PARAMETRIC_x4.f3d b/legacy_printers/printer_mods/Sparreau/z_rail_stop/z_rail_stop_PARAMETRIC_x4.f3d similarity index 100% rename from legacy_printers/printer_mods/Sparreau/z_rail_stop_PARAMETRIC_x4.f3d rename to legacy_printers/printer_mods/Sparreau/z_rail_stop/z_rail_stop_PARAMETRIC_x4.f3d diff --git a/legacy_printers/printer_mods/Sparreau/z_rail_stop_bottom_x4.stl b/legacy_printers/printer_mods/Sparreau/z_rail_stop/z_rail_stop_bottom_x4.stl similarity index 100% rename from legacy_printers/printer_mods/Sparreau/z_rail_stop_bottom_x4.stl rename to legacy_printers/printer_mods/Sparreau/z_rail_stop/z_rail_stop_bottom_x4.stl diff --git a/legacy_printers/printer_mods/Sparreau/z_rail_stop_top_x4.stl b/legacy_printers/printer_mods/Sparreau/z_rail_stop/z_rail_stop_top_x4.stl similarity index 100% rename from legacy_printers/printer_mods/Sparreau/z_rail_stop_top_x4.stl rename to legacy_printers/printer_mods/Sparreau/z_rail_stop/z_rail_stop_top_x4.stl diff --git a/legacy_printers/printer_mods/Stephan/bltouch_mount/.metadata.yml b/legacy_printers/printer_mods/Stephan/bltouch_mount/.metadata.yml index 72e839848..7262570c1 100644 --- a/legacy_printers/printer_mods/Stephan/bltouch_mount/.metadata.yml +++ b/legacy_printers/printer_mods/Stephan/bltouch_mount/.metadata.yml @@ -1,10 +1,10 @@ cad: -- bltouch_v8.step + - bltouch_v8.step description: Drop in replacement of the stock probe to a BLTouch images: -- pic_1.jpg -- pic_2.jpg + - pic_2.jpg + - pic_1.jpg mod_version: 1 printer_compatibility: -- V2.1 + - V2.1 title: BlTouch Mount diff --git a/legacy_printers/printer_mods/XIle/.metadata.yml b/legacy_printers/printer_mods/XIle/Afterburner_Umbilical/.metadata.yml similarity index 94% rename from legacy_printers/printer_mods/XIle/.metadata.yml rename to legacy_printers/printer_mods/XIle/Afterburner_Umbilical/.metadata.yml index 50293667d..dbd5f80e9 100644 --- a/legacy_printers/printer_mods/XIle/.metadata.yml +++ b/legacy_printers/printer_mods/XIle/Afterburner_Umbilical/.metadata.yml @@ -3,5 +3,5 @@ description: Supports a umbilical setup, on AB, taking the strain off connectors images: [] mod_version: 1 printer_compatibility: -- V2.2 + - V2.2 title: AfterBurner Umbilical diff --git a/legacy_printers/printer_mods/XIle/Afterburner_Umbilical.STL b/legacy_printers/printer_mods/XIle/Afterburner_Umbilical/Afterburner_Umbilical.STL similarity index 100% rename from legacy_printers/printer_mods/XIle/Afterburner_Umbilical.STL rename to legacy_printers/printer_mods/XIle/Afterburner_Umbilical/Afterburner_Umbilical.STL diff --git a/legacy_printers/printer_mods/XIle/ReadMe.txt b/legacy_printers/printer_mods/XIle/Afterburner_Umbilical/ReadMe.txt similarity index 96% rename from legacy_printers/printer_mods/XIle/ReadMe.txt rename to legacy_printers/printer_mods/XIle/Afterburner_Umbilical/ReadMe.txt index f424cf88d..4f6640f13 100644 --- a/legacy_printers/printer_mods/XIle/ReadMe.txt +++ b/legacy_printers/printer_mods/XIle/Afterburner_Umbilical/ReadMe.txt @@ -1,9 +1,9 @@ -This is used to support an umbilical setup for the Afterburner toolhead. - -Bolts onto the back of the stepper using 2x M3x20 bolts. - -I utilized McMaster Continuous-Flex cable - -https://www.mcmaster.com/catalog/126/911 - 8082K15 - - +This is used to support an umbilical setup for the Afterburner toolhead. + +Bolts onto the back of the stepper using 2x M3x20 bolts. + +I utilized McMaster Continuous-Flex cable + +https://www.mcmaster.com/catalog/126/911 - 8082K15 + + diff --git a/legacy_printers/printer_mods/andreq/voron2/.metadata.yml b/legacy_printers/printer_mods/andreq/Mobius_Shaft_Jig/.metadata.yml similarity index 100% rename from legacy_printers/printer_mods/andreq/voron2/.metadata.yml rename to legacy_printers/printer_mods/andreq/Mobius_Shaft_Jig/.metadata.yml diff --git a/legacy_printers/printer_mods/andreq/voron2/mobius_shaft_jig.stl b/legacy_printers/printer_mods/andreq/Mobius_Shaft_Jig/mobius_shaft_jig.stl similarity index 100% rename from legacy_printers/printer_mods/andreq/voron2/mobius_shaft_jig.stl rename to legacy_printers/printer_mods/andreq/Mobius_Shaft_Jig/mobius_shaft_jig.stl diff --git a/legacy_printers/printer_mods/bryansj/readme.md b/legacy_printers/printer_mods/bryansj/readme.md deleted file mode 100644 index 86fd2e401..000000000 --- a/legacy_printers/printer_mods/bryansj/readme.md +++ /dev/null @@ -1,2 +0,0 @@ -# Voron-Mods - bryansj Voron Mods diff --git a/legacy_printers/printer_mods/daveidmx/VORON2/.metadata.yml b/legacy_printers/printer_mods/daveidmx/30mm_Fan_Adapter/.metadata.yml similarity index 100% rename from legacy_printers/printer_mods/daveidmx/VORON2/.metadata.yml rename to legacy_printers/printer_mods/daveidmx/30mm_Fan_Adapter/.metadata.yml diff --git a/legacy_printers/printer_mods/daveidmx/VORON2/30mm_fan_adapter.stl b/legacy_printers/printer_mods/daveidmx/30mm_Fan_Adapter/30mm_fan_adapter.stl similarity index 100% rename from legacy_printers/printer_mods/daveidmx/VORON2/30mm_fan_adapter.stl rename to legacy_printers/printer_mods/daveidmx/30mm_Fan_Adapter/30mm_fan_adapter.stl diff --git a/legacy_printers/printer_mods/exquyre/LED_bar_mount/.metadata.yml b/legacy_printers/printer_mods/exquyre/LED_bar_mount/.metadata.yml index 40a2df2ea..bca5434e8 100644 --- a/legacy_printers/printer_mods/exquyre/LED_bar_mount/.metadata.yml +++ b/legacy_printers/printer_mods/exquyre/LED_bar_mount/.metadata.yml @@ -1,12 +1,12 @@ cad: -- led_mount_v3.step + - led_mount_v3.step description: Mount for 12V LED bars to the top extrusions images: -- led_bar.jpg -- led_mount.jpg -- led_mount_F360_screenshot.jpg + - led_mount.jpg + - led_bar.jpg + - led_mount_F360_screenshot.jpg mod_version: 1 printer_compatibility: -- V2.1 -- V2.2 + - V2.1 + - V2.2 title: LED Bar Mount diff --git a/legacy_printers/printer_mods/hackdoggo/v2/bmgobius/.metadata.yml b/legacy_printers/printer_mods/hackdoggo/BMGobius/.metadata.yml similarity index 100% rename from legacy_printers/printer_mods/hackdoggo/v2/bmgobius/.metadata.yml rename to legacy_printers/printer_mods/hackdoggo/BMGobius/.metadata.yml diff --git a/legacy_printers/printer_mods/hackdoggo/v2/bmgobius/SLDPRT/BMGobius_Body_A.SLDPRT b/legacy_printers/printer_mods/hackdoggo/BMGobius/SLDPRT/BMGobius_Body_A.SLDPRT similarity index 100% rename from legacy_printers/printer_mods/hackdoggo/v2/bmgobius/SLDPRT/BMGobius_Body_A.SLDPRT rename to legacy_printers/printer_mods/hackdoggo/BMGobius/SLDPRT/BMGobius_Body_A.SLDPRT diff --git a/legacy_printers/printer_mods/hackdoggo/v2/bmgobius/SLDPRT/BMGobius_Body_B.SLDPRT b/legacy_printers/printer_mods/hackdoggo/BMGobius/SLDPRT/BMGobius_Body_B.SLDPRT similarity index 100% rename from legacy_printers/printer_mods/hackdoggo/v2/bmgobius/SLDPRT/BMGobius_Body_B.SLDPRT rename to legacy_printers/printer_mods/hackdoggo/BMGobius/SLDPRT/BMGobius_Body_B.SLDPRT diff --git a/legacy_printers/printer_mods/hackdoggo/v2/bmgobius/SLDPRT/BMGobius_Idler.SLDPRT b/legacy_printers/printer_mods/hackdoggo/BMGobius/SLDPRT/BMGobius_Idler.SLDPRT similarity index 100% rename from legacy_printers/printer_mods/hackdoggo/v2/bmgobius/SLDPRT/BMGobius_Idler.SLDPRT rename to legacy_printers/printer_mods/hackdoggo/BMGobius/SLDPRT/BMGobius_Idler.SLDPRT diff --git a/legacy_printers/printer_mods/hackdoggo/v2/bmgobius/SLDPRT/~_BMGobius_Body_B.SLDPRT b/legacy_printers/printer_mods/hackdoggo/BMGobius/SLDPRT/~_BMGobius_Body_B.SLDPRT similarity index 100% rename from legacy_printers/printer_mods/hackdoggo/v2/bmgobius/SLDPRT/~_BMGobius_Body_B.SLDPRT rename to legacy_printers/printer_mods/hackdoggo/BMGobius/SLDPRT/~_BMGobius_Body_B.SLDPRT diff --git a/legacy_printers/printer_mods/hackdoggo/v2/bmgobius/SLDPRT/~_BMGobius_Idler.SLDPRT b/legacy_printers/printer_mods/hackdoggo/BMGobius/SLDPRT/~_BMGobius_Idler.SLDPRT similarity index 100% rename from legacy_printers/printer_mods/hackdoggo/v2/bmgobius/SLDPRT/~_BMGobius_Idler.SLDPRT rename to legacy_printers/printer_mods/hackdoggo/BMGobius/SLDPRT/~_BMGobius_Idler.SLDPRT diff --git a/legacy_printers/printer_mods/hackdoggo/v2/bmgobius/STEP/BMGobius_Body_A.STEP b/legacy_printers/printer_mods/hackdoggo/BMGobius/STEP/BMGobius_Body_A.STEP similarity index 100% rename from legacy_printers/printer_mods/hackdoggo/v2/bmgobius/STEP/BMGobius_Body_A.STEP rename to legacy_printers/printer_mods/hackdoggo/BMGobius/STEP/BMGobius_Body_A.STEP diff --git a/legacy_printers/printer_mods/hackdoggo/v2/bmgobius/STEP/BMGobius_Body_B.STEP b/legacy_printers/printer_mods/hackdoggo/BMGobius/STEP/BMGobius_Body_B.STEP similarity index 100% rename from legacy_printers/printer_mods/hackdoggo/v2/bmgobius/STEP/BMGobius_Body_B.STEP rename to legacy_printers/printer_mods/hackdoggo/BMGobius/STEP/BMGobius_Body_B.STEP diff --git a/legacy_printers/printer_mods/hackdoggo/v2/bmgobius/STEP/BMGobius_Idler.STEP b/legacy_printers/printer_mods/hackdoggo/BMGobius/STEP/BMGobius_Idler.STEP similarity index 100% rename from legacy_printers/printer_mods/hackdoggo/v2/bmgobius/STEP/BMGobius_Idler.STEP rename to legacy_printers/printer_mods/hackdoggo/BMGobius/STEP/BMGobius_Idler.STEP diff --git a/legacy_printers/printer_mods/hackdoggo/v2/bmgobius/STL/BMGobius_Body_A.STL b/legacy_printers/printer_mods/hackdoggo/BMGobius/STL/BMGobius_Body_A.STL similarity index 100% rename from legacy_printers/printer_mods/hackdoggo/v2/bmgobius/STL/BMGobius_Body_A.STL rename to legacy_printers/printer_mods/hackdoggo/BMGobius/STL/BMGobius_Body_A.STL diff --git a/legacy_printers/printer_mods/hackdoggo/v2/bmgobius/STL/BMGobius_Body_B.STL b/legacy_printers/printer_mods/hackdoggo/BMGobius/STL/BMGobius_Body_B.STL similarity index 100% rename from legacy_printers/printer_mods/hackdoggo/v2/bmgobius/STL/BMGobius_Body_B.STL rename to legacy_printers/printer_mods/hackdoggo/BMGobius/STL/BMGobius_Body_B.STL diff --git a/legacy_printers/printer_mods/hackdoggo/v2/bmgobius/STL/BMGobius_Idler_A.STL b/legacy_printers/printer_mods/hackdoggo/BMGobius/STL/BMGobius_Idler_A.STL similarity index 100% rename from legacy_printers/printer_mods/hackdoggo/v2/bmgobius/STL/BMGobius_Idler_A.STL rename to legacy_printers/printer_mods/hackdoggo/BMGobius/STL/BMGobius_Idler_A.STL diff --git a/legacy_printers/printer_mods/hackdoggo/v2/bmgobius/STL/BMGobius_Idler_B.STL b/legacy_printers/printer_mods/hackdoggo/BMGobius/STL/BMGobius_Idler_B.STL similarity index 100% rename from legacy_printers/printer_mods/hackdoggo/v2/bmgobius/STL/BMGobius_Idler_B.STL rename to legacy_printers/printer_mods/hackdoggo/BMGobius/STL/BMGobius_Idler_B.STL diff --git a/legacy_printers/printer_mods/masgar/2-in-1_hotend_housing/.metadata.yml b/legacy_printers/printer_mods/masgar/2-in-1_hotend_housing/.metadata.yml index 5d762a212..ac774fa84 100644 --- a/legacy_printers/printer_mods/masgar/2-in-1_hotend_housing/.metadata.yml +++ b/legacy_printers/printer_mods/masgar/2-in-1_hotend_housing/.metadata.yml @@ -1,13 +1,13 @@ cad: -- CAD/2in1_toolhead_housing.f3d -- CAD/2in1_toolhead_housing.step + - CAD/2in1_toolhead_housing.f3d + - CAD/2in1_toolhead_housing.step description: Front/Rear toolhead housing for XCR3D/BTT/BIQU 2-in-1 hotend images: -- images/measures.png -- images/Mouting_Scheme.png + - images/Mouting_Scheme.png + - images/measures.png mod_version: 1 printer_compatibility: -- V1.6 -- V2.1 -- V2.2 + - V1.6 + - V2.1 + - V2.2 title: 2-in-1 hotend housing diff --git a/legacy_printers/printer_mods/masgar/README.md b/legacy_printers/printer_mods/masgar/README.md deleted file mode 100644 index b1699af3d..000000000 --- a/legacy_printers/printer_mods/masgar/README.md +++ /dev/null @@ -1,6 +0,0 @@ -### Dirtree - - -- voltamp_box_panel_insert: contains model for volt/amp meter to insert into front skirt -- BTT_SKR_Mini_v1.1_mounting_frame: contains model for BTT SKR Mini v1.1 mounting frame -- 2-in-1_hotend_housing: contains model of housing for 2-in-1 hotend diff --git a/legacy_printers/printer_mods/nemgrea/5mm coroplast hardware/.metadata.yml b/legacy_printers/printer_mods/nemgrea/5mm coroplast hardware/.metadata.yml new file mode 100644 index 000000000..4289d8817 --- /dev/null +++ b/legacy_printers/printer_mods/nemgrea/5mm coroplast hardware/.metadata.yml @@ -0,0 +1,6 @@ +cad: [] +description: 5mm Coroplast Hardware +images: [] +mod_version: 1 +printer_compatibility: [] +title: 5mm Coroplast Hardware diff --git a/legacy_printers/printer_mods/nemgrea/toolhead indicator mounts/.metadata.yml b/legacy_printers/printer_mods/nemgrea/toolhead indicator mounts/.metadata.yml new file mode 100644 index 000000000..db85def24 --- /dev/null +++ b/legacy_printers/printer_mods/nemgrea/toolhead indicator mounts/.metadata.yml @@ -0,0 +1,6 @@ +cad: [] +description: Toolhead Indicator Mounds +images: [] +mod_version: 1 +printer_compatibility: [] +title: Toolhead Indicator Mounds diff --git a/legacy_printers/printer_mods/pnokel/.metadata.yml b/legacy_printers/printer_mods/pnokel/Cable_Zipper/.metadata.yml similarity index 100% rename from legacy_printers/printer_mods/pnokel/.metadata.yml rename to legacy_printers/printer_mods/pnokel/Cable_Zipper/.metadata.yml diff --git a/legacy_printers/printer_mods/pnokel/Cable_Zipper_5000.stl b/legacy_printers/printer_mods/pnokel/Cable_Zipper/Cable_Zipper_5000.stl similarity index 100% rename from legacy_printers/printer_mods/pnokel/Cable_Zipper_5000.stl rename to legacy_printers/printer_mods/pnokel/Cable_Zipper/Cable_Zipper_5000.stl diff --git a/legacy_printers/printer_mods/pnokel/Coroplast_holders/.metadata.yml b/legacy_printers/printer_mods/pnokel/Coroplast_holders/.metadata.yml new file mode 100644 index 000000000..5e805c925 --- /dev/null +++ b/legacy_printers/printer_mods/pnokel/Coroplast_holders/.metadata.yml @@ -0,0 +1,6 @@ +cad: [] +description: Different coroplast holders for added support +images: [] +mod_version: 1 +printer_compatibility: [] +title: Coroplast holders diff --git a/legacy_printers/printer_mods/pnokel/Coroplast_Holder_Back.stl b/legacy_printers/printer_mods/pnokel/Coroplast_holders/Coroplast_Holder_Back.stl similarity index 100% rename from legacy_printers/printer_mods/pnokel/Coroplast_Holder_Back.stl rename to legacy_printers/printer_mods/pnokel/Coroplast_holders/Coroplast_Holder_Back.stl diff --git a/legacy_printers/printer_mods/pnokel/Coroplast_Holder_Upper.stl b/legacy_printers/printer_mods/pnokel/Coroplast_holders/Coroplast_Holder_Upper.stl similarity index 100% rename from legacy_printers/printer_mods/pnokel/Coroplast_Holder_Upper.stl rename to legacy_printers/printer_mods/pnokel/Coroplast_holders/Coroplast_Holder_Upper.stl diff --git a/legacy_printers/printer_mods/pnokel/Coroplast_Support.stl b/legacy_printers/printer_mods/pnokel/Coroplast_holders/Coroplast_Support.stl similarity index 100% rename from legacy_printers/printer_mods/pnokel/Coroplast_Support.stl rename to legacy_printers/printer_mods/pnokel/Coroplast_holders/Coroplast_Support.stl diff --git a/legacy_printers/printer_mods/pnokel/Lower_Cable_Hole.stl b/legacy_printers/printer_mods/pnokel/Coroplast_holders/Lower_Cable_Hole.stl similarity index 100% rename from legacy_printers/printer_mods/pnokel/Lower_Cable_Hole.stl rename to legacy_printers/printer_mods/pnokel/Coroplast_holders/Lower_Cable_Hole.stl diff --git a/legacy_printers/printer_mods/pnokel/Upper_Cable_Hole.stl b/legacy_printers/printer_mods/pnokel/Coroplast_holders/Upper_Cable_Hole.stl similarity index 100% rename from legacy_printers/printer_mods/pnokel/Upper_Cable_Hole.stl rename to legacy_printers/printer_mods/pnokel/Coroplast_holders/Upper_Cable_Hole.stl diff --git a/legacy_printers/printer_mods/pnokel/Toothed_Idler/.metadata.yml b/legacy_printers/printer_mods/pnokel/Toothed_Idler/.metadata.yml new file mode 100644 index 000000000..0c10bcd96 --- /dev/null +++ b/legacy_printers/printer_mods/pnokel/Toothed_Idler/.metadata.yml @@ -0,0 +1,6 @@ +cad: [] +description: 14.5mm toothed idler +images: [] +mod_version: 1 +printer_compatibility: [] +title: Toothed Idler diff --git a/legacy_printers/printer_mods/pnokel/toothed_idler_small_14.5mm.stl b/legacy_printers/printer_mods/pnokel/Toothed_Idler/toothed_idler_small_14.5mm.stl similarity index 100% rename from legacy_printers/printer_mods/pnokel/toothed_idler_small_14.5mm.stl rename to legacy_printers/printer_mods/pnokel/Toothed_Idler/toothed_idler_small_14.5mm.stl diff --git a/legacy_printers/printer_mods/randommen96/Raspi_cam_mount/.metadata.yml b/legacy_printers/printer_mods/randommen96/Raspi_cam_mount/.metadata.yml index 12539101c..9e8170c4e 100644 --- a/legacy_printers/printer_mods/randommen96/Raspi_cam_mount/.metadata.yml +++ b/legacy_printers/printer_mods/randommen96/Raspi_cam_mount/.metadata.yml @@ -1,11 +1,11 @@ cad: -- cam_mount_rotatable_wide_cam.STEP -- cam_mount_v2_rotatable.STEP + - cam_mount_rotatable_wide_cam.STEP + - cam_mount_v2_rotatable.STEP description: Cam mount for alie raspi cams images: -- View_from_back.jpg -- View_from_front.jpg + - View_from_front.jpg + - View_from_back.jpg mod_version: 1 printer_compatibility: -- V2.2 + - V2.2 title: Raspi cam mount diff --git a/legacy_printers/printer_mods/schlank/minima/.metadata.yml b/legacy_printers/printer_mods/schlank/minima/.metadata.yml index 177c35313..7dca5f7f6 100644 --- a/legacy_printers/printer_mods/schlank/minima/.metadata.yml +++ b/legacy_printers/printer_mods/schlank/minima/.metadata.yml @@ -1,11 +1,11 @@ cad: [] description: Minimalistic Fysetc Mini12864 display mount images: -- img/back.jpg -- img/explode.png -- img/front.jpg -- img/installed.jpg + - img/front.jpg + - img/back.jpg + - img/explode.png + - img/installed.jpg mod_version: 1 printer_compatibility: -- V2.2 + - V2.2 title: Minima diff --git a/legacy_printers/printer_mods/schlank/turbocharger/.metadata.yml b/legacy_printers/printer_mods/schlank/turbocharger/.metadata.yml index 98242cbeb..0d54f2cca 100644 --- a/legacy_printers/printer_mods/schlank/turbocharger/.metadata.yml +++ b/legacy_printers/printer_mods/schlank/turbocharger/.metadata.yml @@ -1,13 +1,13 @@ cad: [] description: Alternative fumes extraction solution images: -- img/assembly_bottom.jpg -- img/assembly_top.jpg -- img/explode.png -- img/installed.jpg -- img/turbocharger.png + - img/installed.jpg + - img/assembly_bottom.jpg + - img/assembly_top.jpg + - img/explode.png + - img/turbocharger.png mod_version: 1 printer_compatibility: -- V2.1 -- V2.2 + - V2.1 + - V2.2 title: Turbocharger diff --git a/legacy_printers/printer_mods/sporadic/30A_Relay_Mount/.metadata.yml b/legacy_printers/printer_mods/sporadic/30A_Relay_Mount/.metadata.yml index 6720e39d0..0a80441a9 100644 --- a/legacy_printers/printer_mods/sporadic/30A_Relay_Mount/.metadata.yml +++ b/legacy_printers/printer_mods/sporadic/30A_Relay_Mount/.metadata.yml @@ -1,10 +1,10 @@ cad: [] description: Mount for a 30A relay module available on Amazon images: -- 30A_Relay_Installed.jpg -- 30A_Relay_Mount.png + - 30A_Relay_Mount.png + - 30A_Relay_Installed.jpg mod_version: 1 printer_compatibility: -- V2.1 -- V2.2 + - V2.1 + - V2.2 title: 30A Relay Mount diff --git a/legacy_printers/printer_mods/sporadic/Dual_RS-25_Mount/.metadata.yml b/legacy_printers/printer_mods/sporadic/Dual_RS-25_Mount/.metadata.yml index 2bd8abb2f..938cd1d29 100644 --- a/legacy_printers/printer_mods/sporadic/Dual_RS-25_Mount/.metadata.yml +++ b/legacy_printers/printer_mods/sporadic/Dual_RS-25_Mount/.metadata.yml @@ -1,11 +1,11 @@ cad: [] description: Dual mount for side by side RS-25 supplies images: -- Dual_RS-25_Installed.jpg -- Dual_RS-25_Mount.png -- Mount_Bottom.jpg + - Mount_Bottom.jpg + - Dual_RS-25_Installed.jpg + - Dual_RS-25_Mount.png mod_version: 1 printer_compatibility: -- V2.1 -- V2.2 + - V2.1 + - V2.2 title: Dual RS-25 Mount diff --git a/legacy_printers/printer_mods/steve450/Voron2.1/.metadata.yml b/legacy_printers/printer_mods/steve450/Corner_Brackets/.metadata.yml similarity index 100% rename from legacy_printers/printer_mods/steve450/Voron2.1/.metadata.yml rename to legacy_printers/printer_mods/steve450/Corner_Brackets/.metadata.yml diff --git a/legacy_printers/printer_mods/steve450/Voron2.1/README.md b/legacy_printers/printer_mods/steve450/Corner_Brackets/README.md similarity index 100% rename from legacy_printers/printer_mods/steve450/Voron2.1/README.md rename to legacy_printers/printer_mods/steve450/Corner_Brackets/README.md diff --git a/legacy_printers/printer_mods/steve450/Voron2.1/corner_bracket_left_logo.stl b/legacy_printers/printer_mods/steve450/Corner_Brackets/corner_bracket_left_logo.stl similarity index 100% rename from legacy_printers/printer_mods/steve450/Voron2.1/corner_bracket_left_logo.stl rename to legacy_printers/printer_mods/steve450/Corner_Brackets/corner_bracket_left_logo.stl diff --git a/legacy_printers/printer_mods/steve450/Voron2.1/corner_bracket_left_nologo.stl b/legacy_printers/printer_mods/steve450/Corner_Brackets/corner_bracket_left_nologo.stl similarity index 100% rename from legacy_printers/printer_mods/steve450/Voron2.1/corner_bracket_left_nologo.stl rename to legacy_printers/printer_mods/steve450/Corner_Brackets/corner_bracket_left_nologo.stl diff --git a/legacy_printers/printer_mods/steve450/Voron2.1/corner_bracket_right_logo.stl b/legacy_printers/printer_mods/steve450/Corner_Brackets/corner_bracket_right_logo.stl similarity index 100% rename from legacy_printers/printer_mods/steve450/Voron2.1/corner_bracket_right_logo.stl rename to legacy_printers/printer_mods/steve450/Corner_Brackets/corner_bracket_right_logo.stl diff --git a/legacy_printers/printer_mods/steve450/Voron2.1/corner_bracket_right_nologo.stl b/legacy_printers/printer_mods/steve450/Corner_Brackets/corner_bracket_right_nologo.stl similarity index 100% rename from legacy_printers/printer_mods/steve450/Voron2.1/corner_bracket_right_nologo.stl rename to legacy_printers/printer_mods/steve450/Corner_Brackets/corner_bracket_right_nologo.stl diff --git a/legacy_printers/printer_mods/wile.e.coyote/coroplast_support/.metadata.yml b/legacy_printers/printer_mods/wile.e.coyote/coroplast_support/.metadata.yml new file mode 100644 index 000000000..c94d69067 --- /dev/null +++ b/legacy_printers/printer_mods/wile.e.coyote/coroplast_support/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: Support for the coroplast to prevent sagging +images: [] +mod_version: 1 +printer_compatibility: + - V2.1 +title: Coroplast Support diff --git a/legacy_printers/printer_mods/wile.e.coyote/coroplast_support_lower.stl b/legacy_printers/printer_mods/wile.e.coyote/coroplast_support/coroplast_support_lower.stl similarity index 100% rename from legacy_printers/printer_mods/wile.e.coyote/coroplast_support_lower.stl rename to legacy_printers/printer_mods/wile.e.coyote/coroplast_support/coroplast_support_lower.stl diff --git a/legacy_printers/printer_mods/wile.e.coyote/coroplast_support_upper.stl b/legacy_printers/printer_mods/wile.e.coyote/coroplast_support/coroplast_support_upper.stl similarity index 100% rename from legacy_printers/printer_mods/wile.e.coyote/coroplast_support_upper.stl rename to legacy_printers/printer_mods/wile.e.coyote/coroplast_support/coroplast_support_upper.stl diff --git a/legacy_printers/printer_mods/wile.e.coyote/custom_parts_and_mods.md b/legacy_printers/printer_mods/wile.e.coyote/custom_parts_and_mods.md deleted file mode 100644 index 8b1378917..000000000 --- a/legacy_printers/printer_mods/wile.e.coyote/custom_parts_and_mods.md +++ /dev/null @@ -1 +0,0 @@ - diff --git a/legacy_printers/printer_mods/wile.e.coyote/dual_buck_bracket/.metadata.yml b/legacy_printers/printer_mods/wile.e.coyote/dual_buck_bracket/.metadata.yml new file mode 100644 index 000000000..bab95c5fd --- /dev/null +++ b/legacy_printers/printer_mods/wile.e.coyote/dual_buck_bracket/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: Mounting bracket for 2 buck converters +images: [] +mod_version: 1 +printer_compatibility: + - V1.6 + - V2.1 + - V2.2 +title: Dual Buck Bracket diff --git a/legacy_printers/printer_mods/wile.e.coyote/dual_buck_bracket_rev2.stl b/legacy_printers/printer_mods/wile.e.coyote/dual_buck_bracket/dual_buck_bracket_rev2.stl similarity index 100% rename from legacy_printers/printer_mods/wile.e.coyote/dual_buck_bracket_rev2.stl rename to legacy_printers/printer_mods/wile.e.coyote/dual_buck_bracket/dual_buck_bracket_rev2.stl diff --git a/legacy_printers/printer_mods/wile.e.coyote/nozzle_scrubber_mount/.metadata.yml b/legacy_printers/printer_mods/wile.e.coyote/nozzle_scrubber_mount/.metadata.yml new file mode 100644 index 000000000..55cdc1c53 --- /dev/null +++ b/legacy_printers/printer_mods/wile.e.coyote/nozzle_scrubber_mount/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Mount for brass brush. Used for cleaning nozzle before printing +images: [] +mod_version: 1 +printer_compatibility: + - V2.1 + - V2.2 +title: Nozzle Scrubber Mount diff --git a/legacy_printers/printer_mods/wile.e.coyote/nozzle_scrubber_mount.stl b/legacy_printers/printer_mods/wile.e.coyote/nozzle_scrubber_mount/nozzle_scrubber_mount.stl similarity index 100% rename from legacy_printers/printer_mods/wile.e.coyote/nozzle_scrubber_mount.stl rename to legacy_printers/printer_mods/wile.e.coyote/nozzle_scrubber_mount/nozzle_scrubber_mount.stl diff --git a/legacy_printers/printer_mods/wile.e.coyote/.metadata.yml b/legacy_printers/printer_mods/wile.e.coyote/wago_mounts/.metadata.yml similarity index 82% rename from legacy_printers/printer_mods/wile.e.coyote/.metadata.yml rename to legacy_printers/printer_mods/wile.e.coyote/wago_mounts/.metadata.yml index ca5377442..bf38d1eb6 100644 --- a/legacy_printers/printer_mods/wile.e.coyote/.metadata.yml +++ b/legacy_printers/printer_mods/wile.e.coyote/wago_mounts/.metadata.yml @@ -3,7 +3,7 @@ description: Different mounts for Wago connectors images: [] mod_version: 1 printer_compatibility: -- V1.6 -- V2.1 -- V2.2 + - V1.6 + - V2.1 + - V2.2 title: Wago Mounts diff --git a/legacy_printers/printer_mods/wile.e.coyote/wago_mount-222-412-use_supports-.stl b/legacy_printers/printer_mods/wile.e.coyote/wago_mounts/wago_mount-222-412-use_supports-.stl similarity index 100% rename from legacy_printers/printer_mods/wile.e.coyote/wago_mount-222-412-use_supports-.stl rename to legacy_printers/printer_mods/wile.e.coyote/wago_mounts/wago_mount-222-412-use_supports-.stl diff --git a/legacy_printers/printer_mods/wile.e.coyote/wago_mount-222-413-use_supports-.stl b/legacy_printers/printer_mods/wile.e.coyote/wago_mounts/wago_mount-222-413-use_supports-.stl similarity index 100% rename from legacy_printers/printer_mods/wile.e.coyote/wago_mount-222-413-use_supports-.stl rename to legacy_printers/printer_mods/wile.e.coyote/wago_mounts/wago_mount-222-413-use_supports-.stl diff --git a/legacy_printers/printer_mods/wile.e.coyote/wago_mount-222-415-use_supports-.stl b/legacy_printers/printer_mods/wile.e.coyote/wago_mounts/wago_mount-222-415-use_supports-.stl similarity index 100% rename from legacy_printers/printer_mods/wile.e.coyote/wago_mount-222-415-use_supports-.stl rename to legacy_printers/printer_mods/wile.e.coyote/wago_mounts/wago_mount-222-415-use_supports-.stl