Resubmission for Stealth Zero (#798)

* Update README.md

* Update README.md

* Add files via upload

* Update README.md

* Delete printer_mods/MasturMynd/Stealth Zero directory

* Add files via upload

* Update README.md

* Add files via upload

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Corrected Spelling

Toolless was misspelled. Correcting to resolve pending pull request.

* Updated belt path to match modified x carriage

printer_mods/MasturMynd/Stealth_Zero/Motor_Frames/README.md

@@ -0,0 +1,12 @@
+![Image of Stealth Zero Gantry](../Images/V0.1-B_Motor_Inner_Front.png)
+
+BOM
+---
+| QTY | Part | Comments |
+| --- | --- | --- |
+| 8 | M3x8 BHCS | 2 of these can be reused from the stock top hat lower corners |
+| 2 | M3x10 BHCS | You can reuse these from the stock motor mounts |
+| 12 | M3x25 BHCS | |
+| 4 | M3x35 BHCS | You can reuse these from the stock motor mounts |
+| 8 | M3 Hex Nut | You can reuse these from the stock motor mounts |
+| 8 | M3 Threaded Insert | |

printer_mods/MasturMynd/Stealth_Zero/README.md

@@ -0,0 +1,27 @@
+Stealth Zero
+---
+A low poly gantry mod for the Voron V0.1
+
+![Image of Stealth Zero Gantry](./Images/V0.1-Complete_Gantry.png)
+
+In anticipation of the Mini Stealthburner I decided to alter the design of the V0.1 gantry to match the low poly aesthetic.
+
+You can find the low poly front bed mount here: https://github.com/MapleLeafMakers/Stealth_Bed_Front
+
+WARNING
+---
+I feel like it is worth mentioning that this mod is in active development. I've personally been testing the V0.1 parts along with the front mounted X carriage without any issues. [zruncho3d](https://github.com/zruncho3d) has been providing feedback on the design of the BoxZero mod and will be testing shortly.
+
+Included in this mod are:
+* Front mounted belt tensioners - These can be used to allow for additional tension adjustment in combination with the stock motor tensioners of the V0.1 or in conjuction with the rest of the items available in this mod for a full stealth look.
+* Optional front mounted X rail - The use of the motor mounts included in this repo are required to maintain the full 120mm of Y travel. A custom designed, adustable Y endstop mount is included in the folder containing the X carriage.
+* Toolless motor caps - I can't be the only one that's dropped something into the motors, right?
+
+BOM (WIP)
+---
+
+I've included the BOM for each individual component in their respective folders. There are a number of parts that are reused from a stock V0.1 build and the rest should be lying around as extras if you bought a kit. The only "custom" part required for this mod is a 3x14mm pin for the front tensioners. The space constraints of the V0 (and derivatives) prevented the use of more common hardware.
+
+THANKS
+---
+I owe thanks to those that have provided feedback and suggestions while I have been working on these designs. First and foremost, I owe thanks to the Voron team, especially [nemgrea](https://github.com/nemgrea), who designed the V0.1. Next I need to thank [Ramalama2](https://github.com/Ramalama2) for the original design that the front idlers of this mod are loosely based on. I also owe a huge thank you to [clee](https://github.com/clee) and [zruncho3d](https://github.com/zruncho3d) for their invaluable feedback and support throughout the design process.

printer_mods/MasturMynd/Stealth_Zero/Tensioners/README.md

@@ -0,0 +1,16 @@
+The design of these front mounted tensioners prevents the use of the stock tophat lower corners. As such, modified lower corners are included here with a matching aesthetic.
+
+![Image of Stealth Zero Gantry](../Images/V0.1-B_Tensioner_Inner_Rear.png)
+
+![Image of Stealth Zero Gantry](../Images/V0.1-B_Tensioner_Outer_Front.png)
+
+BOM
+---
+| QTY | Part | Comments |
+| --- | --- | --- |
+| 6 | M3x8 BHCS | 4 of these can be reused from the top hat lower corners and the rail stops |
+| 2 | M3x10 BHCS | You can reuse these from the stock front idlers |
+| 2 | M3x12 BHCS | You can reuse these from the stock top hat lower corners |
+| 4 | M3x20 BHCS | |
+| 8 | M3 Hex Nut | 4 of these can be reused from the top hat lower corners and the rail stops |
+| 2 | 3x14mm Pin | |

printer_mods/MasturMynd/Stealth_Zero/XY_Joints/Front_Rail/README.md

@@ -0,0 +1,18 @@
+WARNING
+---
+It is important to note that the linear rails for Z motion (the ones the bed attach to) will need to be moved up by ~2mm for optimal positioning when using these XY joints.
+
+BOM
+---
+| QTY | Part | Comments |
+| --- | --- | --- |
+| 8 | M2x6 FHCS | You can reuse these from the stock XY Joints |
+| 4 | M3x8 BHCS | 2 of these can be reused from the stock XY Joints |
+| 4 | M3x12 BHCS | 3 of these can be reused from the stock XY Joints |
+| | | Only 3 are needed if installing the X-Endstop Bumper |
+| 1 | M3x16 BHCS | You can reuse this from the stock XY Joints |
+| | | Only required if installing the X-Endstop Bumper (replaces M3x12 BHCS) |
+| 1 | M3x16 SHCS | Only required if installing the X-Endstop Bumper (for adjustable X home) |
+| 8 | M3x25 BHCS | 4 of these can be reused from the stock XY Joints |
+| 8 | M3 Hex Nut | 6 of these can be reused from the stock XY Joints |
+| 8 | M3 Threaded Insert | |

printer_mods/MasturMynd/Stealth_Zero/XY_Joints/README.md

@@ -0,0 +1,5 @@
+The directories here should be fairly self explanatory. The X endstop bumper will work with either design, but be mindful that you may need to adjust the orientation of your Endstop in order to ensure that the trigger button impacts the bumper. Improper orientation will prevent the switch from triggering.
+
+![Image of Stealth Zero Gantry](../Images/XY_Joint_Inner_Front.png)
+
+![Image of Stealth Zero Gantry](../Images/XY_Joint_Outer_Rear.png)

printer_mods/MasturMynd/Stealth_Zero/XY_Joints/Top_Rail/README.md

@@ -0,0 +1,14 @@
+BOM
+---
+| QTY | Part | Comments |
+| --- | --- | --- |
+| 8 | M2x6 FHCS | You can reuse these from the stock XY joints |
+| 4 | M3x8 BHCS | 2 of these can be reused from the stock XY Joints |
+| 4 | M3x12 BHCS | You can reuse these from the stock XY Joints |
+| | | Only 3 are needed if installing the X-Endstop Bumper |
+| 1 | M3x16 BHCS | You can reuse this from the stock XY Joints |
+| 1 | M3x16 BHCS | Only required if installing the X-Endstop Bumper (replaces M3x12 BHCS) |
+| 1 | M3x16 SHCS | Only required if installing the X-Endstop Bumper (for adjustable X home) |
+| 6 | M3x25 BHCS | 4 of these can be reused from the stock XY joints |
+| 8 | M3 Hex Nut | 6 of these can be reused from the stock XY joints |
+| 6 | M3 Threaded Insert | |

printer_mods/MasturMynd/Stealth_Zero/X_Axis/README.md

@@ -0,0 +1,24 @@
+These parts are only needed if you intend on front mounting the linear rail for X travel. If you will be sticking with a top mounted linear rail these parts will not fit or will not line up properly.
+
+It is also important to note that the linear rails for Z motion (the ones the bed attach to) will need to be moved up by ~2mm for optimal positioning.
+
+The X Carriage design originated from the Micron and was adapted to align with my vision for this project. All credit for the original design goes to those that worked on this project: https://github.com/PrintersForAnts/Micron
+
+![Image of Stealth Zero Gantry](../Images/Carriage_Endstops_Right_Front.png)
+
+![Image of Stealth Zero Gantry](../Images/Carriage_Endstops_Left_Rear.png)
+
+BOM
+---
+| QTY | Part | Comments |
+| --- | --- | --- |
+| 4 | M2x6 BHCS | You can reuse these from the stock X-Carriage |
+| 3 | M2x10 Self Tapping Screw | You can reuse these from the stock X-Endstop and Y-Endstop Bumpers |
+| | | 2 required if only installing the Y-Endstop Bumper (for adjustable Y home) |
+| | | 1 required if only installing the X-Endstop Bumper (for adjustable X home) |
+| 4 | M3x6 BHCS | Only required if installing the Y-Endstop Bumper (for adjustable Y home) |
+| 2 | M3x8 BHCS | Only required if installing the X-Endstop Bumper (for adjustable X home) |
+| 1 | M3x12 SHCS | Only required if installing the Y-Endstop Bumper (for adjustable Y home) |
+| 4 | M3 Hex Nut | 2 can be reused from the stock motor mounts (the StealthZero motor mounts only use 3 each along the top supporting rail) |
+| | | Only required if installing the Y-Endstop Bumper (for adjustable Y home) |
+| 5 | M3 Threaded Insert | 3 Required if not installing the X-Endstop Bumper (for adjustable X home) |

printer_mods/README.md

@@ -266,7 +266,8 @@ like so:
 |madfabrications |[Vertical PSU Mount](./madfabrications/Vertical_PSU_Mount) |Mounts the PSU vertically on the DIN rails|:x: |:x: |:heavy_check_mark:|:x:|
 |madros |[V0 OLED-skirt](./madros/V0_skirt_OLED) |V0 skirt with 0.96" OLED|:heavy_check_mark: |:x: |:x: |:x:|
 |MarcPot |[UHP PSU Bracket Clip](./MarcPot/UHP_PSU_Bracket_Clip)|DIN rail mount for the Mean Well UHP series PSU. |:grey_question: |:grey_question: |:heavy_check_mark: |:x:|
-| |[Hour Counter Skirt + Keystone Skirt](./MarcPot/Skirt_Mods)|Skirt mod for a mechanical hour counter and keystone inserts |:x: |:x: |:heavy_check_mark: |:x:|
+| |[Hour Counter Skirt + Keystone Skirt](./MarcPot/Skirt_Mods)|Skirt mod for a mechanical hour counter and keystone inserts | :x: |:x: |:heavy_check_mark: |:x:|
+| MasturMynd | [Stealth Zero](./MasturMynd/Stealth_Zero) | A low poly gantry with front tensioners and optional front mounted x rail | :heavy_check_mark: | :x: | :x: | :x: | :x: |
 |MathematicalPotato| [V0.1 Belted Z Drive](./MathematicalPotato/v0.1_belted_z_drive) | Conversion to a belted Z axis for the V0.1 adapted from theFPVGeek's mod for the V0.0| :heavy_check_mark: | :x: | :x: | :x: |
 |Maverick_ | [V0 C14 Inlet](./Maverick_/V0_C14_Inlet_Foot) | A modification to the rear foot of the V0 to allow for the addition of a C14 Inlet. | :heavy_check_mark: | :x: | :x: |:x:|
 | | [V0 Deck Logo](./Maverick_/V0_Deck_Logo_LED) | A lower deck panel addition to the V0, designed to accomodate a Neopixel Ring. | :heavy_check_mark: | :x: | :x: |:x:|