diff --git a/printer_mods/Polared/Power_Inlet_w_Keystone_Insert/STLs/Power_Inlet_w_Keystone_Insert_x1.stl b/printer_mods/Polared/Power_Inlet_w_Keystone_Insert/STLs/Power_Inlet_w_Keystone_Insert_x1.stl
new file mode 100644
index 000000000..6eff20fc9
Binary files /dev/null and b/printer_mods/Polared/Power_Inlet_w_Keystone_Insert/STLs/Power_Inlet_w_Keystone_Insert_x1.stl differ
diff --git a/printer_mods/Polared/Power_Inlet_w_Keystone_Insert/images/installed.jpg b/printer_mods/Polared/Power_Inlet_w_Keystone_Insert/images/installed.jpg
new file mode 100644
index 000000000..ac60244d2
Binary files /dev/null and b/printer_mods/Polared/Power_Inlet_w_Keystone_Insert/images/installed.jpg differ
diff --git a/printer_mods/Polared/Power_Inlet_w_Keystone_Insert/readme.md b/printer_mods/Polared/Power_Inlet_w_Keystone_Insert/readme.md
new file mode 100644
index 000000000..f958da4f2
--- /dev/null
+++ b/printer_mods/Polared/Power_Inlet_w_Keystone_Insert/readme.md
@@ -0,0 +1,23 @@
+# Power-Inlet-w-Keystone-Insert
+For Voron 0.1
+
+## Description
+Adds a keystone slot for the v0.1 Power Inlet. This does not change the way the inlet mounts onto the frame. 
+_This was remixed in TinkerCad, using the original v0.1 power inlet, as well as a section of the v2.4 power inlet (the keystone insert portion)._
+
+<img src="./images/installed.jpg" width="400">
+
+## BOM
+1. Keystone insert x1
+2. LAN cable x1
+3. Heatset insert x1
+
+## Installation
+1. Install heatset insert (per the original assembly instructions)
+2. Cut LAN cable to required length
+3. Crimp it onto the keystone insert
+    - I used a toolless keystone insert
+4. Insert keystone insert into the inlet slot
+5. Slide in the prepared power inlet 
+6. Mount the power inlet per assembly instructions
+
diff --git a/printer_mods/README.md b/printer_mods/README.md
index c0f91e48b..aed04afdd 100644
--- a/printer_mods/README.md
+++ b/printer_mods/README.md
@@ -255,6 +255,7 @@ like so:
 |padok |[Chain Anchor - ADXL345 mount Mod](./padok/chain_anchor-ADXL345_mount) | A ADXL345 mount for the Afterburner |:x: |:grey_question: |:heavy_check_mark: |:grey_question: |
 |Phalanx |["Other" Idlers Mod](./Phalanx/Other-V2-Idlers/) | Allow usage of wider toolheads on the V2 |:x: |:grey_question: |:heavy_check_mark: |:x:|
 |piet206 |[V1.8 Z Rails Mod](./piet206/V1.8._Z_Rails_Mod) | Add MGN12H linear rails for Z axis motion |:x: |:heavy_check_mark: |:x: |:x:|
+| Polared | [Power Inlet with Keystone Insert](./Polared/Power_Inlet_w_Keystone_Insert) | Voron 0.1 Power inlet with keystone insert slot | :heavy_check_mark: | :x: | :x: | :x: | :x:|
 | Printopal | [Magnetic top panel](Printopal/Magnetic_top_panel) | Top panel with magnets allows for quick installation and removal | :x: | :heavy_check_mark:| :heavy_check_mark: | :x: |
 |QuackProfit|[V0 Adafruit NeoPixel LED Mounts](./QuackProfit/V0-Adafruit-Y_Rails) | Mount Adafruit PCB NeoPixel Sticks on the V0 Y-rail extrusions | :heavy_check_mark:|:x:|:x:|:x:|
 | quattroerik | [V2.4 Door Hinge M3 3mm 180deg](./quattroerik/front_door_m3_180_deg_3mm) | Voron 2.4 door hinges for 3mm panel, 180 deg opening and m3 screw as shaft | :x: | :x: | :heavy_check_mark: | :x: | :heavy_check_mark: |
@@ -335,3 +336,4 @@ like so:
 | | [V0 Skirt set](./Zen3D/V0_Skirt)| SSR, PowerSwitch, Nameplate and color change printing  | :heavy_check_mark: |:x: |:x: |:x:|
 | | [V0 1515 T-nut](./Zen3D/V0_1515_T-nut)| M3 square and hex nuts for Voron0 1515 frame | :heavy_check_mark: |:x: |:x: |:x:|
 | zruncho | [V0 No-Drop Nuts](./zruncho/V0_No_Drop_Nuts) | Voron0 nut inserts which auto-align (LDO frames only) | :heavy_check_mark: | :x: | :x: | :x: |
+