C92X_PsycHoShafts_Mount (#665)

* Create PsychoShaft

* Delete PsychoShaft

* Create README.MD

* Add files via upload

* Update README.MD

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Add files via upload

* Update README.md

* Delete C92X_Extrusion_Bracket.stl

* Add files via upload

* Delete Voron_C92X_Camera_Complete.f3d

* Delete Voron_C92X_Camera_Complete.step

* Create CAD

* Delete CAD

* Create CAD

* Delete CAD

* Add files via upload

* Create CAD

* Delete CAD

* Create CAD FILES

* Delete Voron_C92X_Camera_Complete.f3d

* Delete Voron_C92X_Camera_Complete.step

* Add files via upload

* Delete CAD FILES

* Delete C92X_Camera_Bracket.stl

* Delete C92X_Extrusion_Bracket - No Support Required.stl

* Delete C92X_Extrusion_Bracket - Requires Support.stl

* Delete C92X_Spacer_Arm.stl

* Create STL

* Delete STL

* Create STL

* Add files via upload

* Delete printer_mods/PsychoShaft/C92X_PsycHoShafts_Mount/STL. directory

* Create FILES

* Add files via upload

* Delete FILES

* Delete Voron_C92X_Camera_Complete.f3d

* Delete Voron_C92X_Camera_Complete.step

* Create FILES

* Add files via upload

* Delete FILES

* updated all stl's for PR

Updated CAD and STL finds, no longer requires support for all files.

printer_mods/PsychoShaft/C92X_PsycHoShafts_Mount/README.MD

@@ -0,0 +1,31 @@
+# Important Notes
+
+Hello everyone,
+
+Here is my C920 camera mod, please follow the disasembly guide below to remove the current mount off the camera. Please keep the 4 bottom screws from the mount as you will need them for my mod.
+
+
+# Instructions For Disassembly
+
+[Found Here!](https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077)
+#
+
+This mod allows you to set 2 point postion for your camera, 
+
+## BOM
+
+Qty | Item
+:-- | :--
+2 | M3x40mm
+1 | M3x10mm
+2 | Nuts
+1 | M3 Hammerhead nut
+
+[![](https://www.paypalobjects.com/en_US/i/btn/btn_donate_LG.gif)](https://www.paypal.com/paypalme/PsychoShaft)
+
+# Photos of finished build below
+
+![](Images/Camera_complete.jpg) 
+![](Images/Camera_fit_on_profile.jpg) 
+![](Images/Camera_front_view.jpg) 
+![](Images/Camera_hinge_design.jpg) 

printer_mods/README.md

@@ -268,6 +268,7 @@ like so:
 |piet206 |[V1.8 Z Rails Mod](./piet206/V1.8._Z_Rails_Mod) | Add MGN12H linear rails for Z axis motion |:x: |:heavy_check_mark: |:x: |:x:|
 | Polared | [Power Inlet with Keystone Insert](./Polared/Power_Inlet_w_Keystone_Insert) | Voron 0.1 Power inlet with keystone insert slot | :heavy_check_mark: | :x: | :x: | :x: | :x:|
 | Printopal | [Magnetic top panel](Printopal/Magnetic_top_panel) | Top panel with magnets allows for quick installation and removal | :x: | :heavy_check_mark:| :heavy_check_mark: | :x: |
+| PsychoShaft | [C92X_PsycHoShafts_Mount](./PsychoShaft/C92X_PsycHoShafts_Mount) | 2020 Top profile 920 camera mount / 2 point axis pivot | :grey_question: | :heavy_check_mark: | :heavy_check_mark: | :x: | :heavy_check_mark: |
 |QuackProfit|[V0 Adafruit NeoPixel LED Mounts](./QuackProfit/V0-Adafruit-Y_Rails) | Mount Adafruit PCB NeoPixel Sticks on the V0 Y-rail extrusions | :heavy_check_mark:|:x:|:x:|:x:|
 | quattroerik | [V2.4 Door Hinge M3 3mm 180deg](./quattroerik/front_door_m3_180_deg_3mm) | Voron 2.4 door hinges for 3mm panel, 180 deg opening and m3 screw as shaft | :x: | :x: | :heavy_check_mark: | :x: | :heavy_check_mark: |
 |randell   |[Door Hinges](./randell/Door_Hinges) |Door hinges that use an M3 bolt for a pin and bolts thru the panel |:x: |:x: |:heavy_check_mark: |:x:|