Merge branch 'main' into modesty-mesh

printer_mods/EmJay276/stealthburner_dragon_UHF_toolhead/.metadata.yml

@@ -0,0 +1,34 @@
+---
+# The title of your mod. Choose a short and descriptive name
+title: Stealthburner Phaetus Dragon UHF and Phaetus Dragon UHF mini
+# A short description of your mod. Try to describe your mod with 1-2 short sentences
+description: This mod adds a tool cartridge for the Phaetus Dragon UHF and Phaetus Dragon UHF mini hotend
+# Mod version: Set this to 1 when you are submitting a new mod. When you make changes to your mod, you may increment this number
+mod_version: 1
+# You may add your discord username here so people can contact you about your mod
+discord_username: emjay276
+# The CAD files for your mod. Please provide them as a list.
+# Note that each mod must include at least one CAD file.
+cad:
+- CAD/Stealthburner_Printhead_Dragon_UHF.stp
+- CAD/Stealthburner_Printhead_Dragon_UHF_mini.stp
+# The image files provided with your mod. These may be instructions you use in your README.md file, or other additional pictures.
+# **Note that the first image specified here will be used as cover image on mods.vorondesign.com**
+# All paths are relative to this .metadata.yml file.
+images:
+- images/back.png
+- images/back_uhf.png
+- images/back_uhf_mini.png
+- images/cable_channel.png
+- images/cross_section.png
+- images/front.jpg
+- images/front_uhf.png
+- images/front_uhf_mini.png
+- images/hotend_installation.jpg
+# Printer compatibility. Please specify all compatible printers as a list. The following values are accepted:
+# "V0", "V0.1", "V0.2", "V0.2r1", "V1", "V1.6", "V1.8", "V1.8r1",  "V2", "V2.1", "V2.2", "V2.4", "V2.4r1", "V2.4r2", "VSW", "VT", "VTr1", "VL"
+# Please only specify printers that you have either tested your mod on yourself, or that someone else has tested for you. If you are unsure whether your
+# mod is compatible with a certain printer, don't list it here!
+printer_compatibility:
+- VT
+- V2.4

printer_mods/EmJay276/stealthburner_dragon_UHF_toolhead/README.md

@@ -0,0 +1,31 @@
+Stealthburner Phaetus Dragon UHF and Phaetus Dragon UHF mini tool cartridge
+===
+With special thanks to @eamers for the Crazy dragon heatblock, as well as @bythorsthunder for the Stealthburner Rapido UHF body design the awesome base design from the VoronDesign team! 
+
+For the regular Dragon UHF hotend with the extended melt zone, use the `SB_Dragon_UHF_TH_*.stl` and the enlarged main body `Stealthburner_Body_Dragon_UHF.stl`.
+Parts were extended by 8.3mm to fit the Stealthburner Rapido UHF main body by @bythorsthunder.
+
+<img src="images/front_uhf.png" alt="front_uhf" width="450"/>
+
+If you use the Dragon UHF mini hotend (standard UHF version without the melt zone extender), use `SB_Dragon_UHF_TH_mini_*.stl` and the regular Stealthburner body.
+
+<img src="images/front_uhf_mini.png" alt="front_uhf_mini" width="450"/>
+
+The fan duct is designed based on the Crazy Dragon Fan Duct, allowing air to only blow towards the heatbreak.
+More clearance for the heater cable was added to allow mounting the hotend in the proper direction (heater facing forward, thermistor facing backward).
+Additionally, clearance for the Voron Tap (R8) screws were added.
+
+<img src="images/cable_channel.png" alt="cable_channel" width="450"/>
+<img src="images/hotend_installation.jpg" alt="hotend_installation" width="450"/>
+
+Print Parameters
+---
+Print in standard Voron settings. 
+
+Previews
+---
+<img src="images/front.jpg" alt="front" width="450"/>
+<img src="images/back.png" alt="back" width="450"/>
+<img src="images/back_uhf.png" alt="back" width="450"/>
+<img src="images/back_uhf_mini.png" alt="back" width="450"/>
+<img src="images/cross_section.png" alt="cross_section" width="450"/>

printer_mods/README.md

@@ -127,6 +127,7 @@ Printer mods for Voron 3D printers
 |  | [Short Z Joints](Ellis/Short_Z_Joints) | Shorter Z joints for the v2.4 | V2.4 | 2023-10-24T11:32:29+00:00 |
 |  | [Single MGN9H Carriage](Ellis/Single_MGN9H_Carriage) | Single MGN9H toolhead carriage with toolhead x endstop support (for... | V1.8, V2.4 | 2023-07-14T13:24:54+00:00 |
 | ElPoPo | [Removable Doors](ElPoPo/RemovableDoors) | New hinge to easily remove the door and have a wide opening V2.x | V2.4 | 2023-07-14T13:24:54+00:00 |
+| EmJay276 | [Stealthburner Phaetus Dragon UHF...](EmJay276/stealthburner_dragon_UHF_toolhead) | This mod adds a tool cartridge for the Phaetus Dragon UHF and... | V2.4, VT | 2023-12-26T23:18:46+00:00 |
 | Empusas | [Mounts for BTT Filament Motion...](Empusas/BTT_Filament_Motion_Sensor_Mount) | Mounts for Big Tree Tech Smart Filament Motion Sensor | V0.2, V1.8, V2.4, VSW | 2023-07-14T13:24:54+00:00 |
 |  | [Power Skirt 2.x FN284-10-06](Empusas/PowerSkirt_FN284-10-06) | Power Skirt for Schaffner FN284-10-06 V2.x | V2.4 | 2023-07-14T13:24:54+00:00 |
 |  | [Mounts for Terminal Blocks NC933...](Empusas/Terminal_Blocks_NC933_SPL-62) | Mounts for Terminal Blocks NC933 and SPL-62 from AliExpress | V2.4 | 2023-07-14T13:24:54+00:00 |

printer_mods/mods.json

@@ -487,6 +487,14 @@
         "printer_compatibility": "V1.8, V2.4",
         "last_changed": "2023-07-14T13:24:54+00:00"
     },
+    {
+        "path": "EmJay276/stealthburner_dragon_UHF_toolhead",
+        "title": "Stealthburner Phaetus Dragon UHF and Phaetus Dragon UHF mini",
+        "creator": "EmJay276",
+        "description": "This mod adds a tool cartridge for the Phaetus Dragon UHF and Phaetus Dragon UHF mini hotend",
+        "printer_compatibility": "V2.4, VT",
+        "last_changed": "2023-12-26T23:18:46+00:00"
+    },
     {
         "path": "Empusas/BTT_Filament_Motion_Sensor_Mount",
         "title": "Mounts for BTT Filament Motion Sensor",