diff --git a/printer_mods/README.md b/printer_mods/README.md index 226d987f6..5bc60f11d 100644 --- a/printer_mods/README.md +++ b/printer_mods/README.md @@ -43,6 +43,7 @@ like so: | | [Din Rail 2020 Holder](./tameike/DIN_Rail_2020_holder) | Attaching DIN Rails to 2020 | :x: | :grey_question: | :heavy_check_mark: | | | [TacoRaven Mounting Frame](./tameike/V0_TR_Mounting_Frame) | TR V0 mount | :heavy_check_mark: | :x: | :x: | | | [Jetpack V0 base](./tameike/Jetpack_V0)| Attach Jetpack to V0 frame | :heavy_check_mark: |:x: |:x: | +| warriorofwire | [Slenderfan for Afterburner](./warriorofwire/slenderfan) | Lighter, quieter, smaller Afterburner | :x: | :x: | :heavy_check_mark: | | xbst_ | [PCB LED Holder](./xbst_/LED_Holder)| Very simple mount for some (?) PCB LED Bars | :x: |:heavy_check_mark: |:heavy_check_mark: | | | [DIN Mount Omron Relay](./xbst_/Omron_DIN_Mount)| A simple DIN rail mount for the BOM Relay | :x: | :heavy_check_mark: |:heavy_check_mark: | | | [DIN Mount Pi 4x Relay Board](./xbst_/Relay_DIN_Mount)| A simple DIN rail mount for the 4 channel relay board for Raspberry Pi | :x: | :heavy_check_mark: |:heavy_check_mark: | diff --git a/printer_mods/warriorofwire/slenderfan/README.md b/printer_mods/warriorofwire/slenderfan/README.md new file mode 100644 index 000000000..1887bf10f --- /dev/null +++ b/printer_mods/warriorofwire/slenderfan/README.md @@ -0,0 +1,45 @@ +# Slender layer fan for 2.4 +![render](./images/render.png) + +![opened](./images/render_open.png) + +![on-printer image](./images/printer.png) + + +## What does it do +* It gives you 7-10mm additional Y travel before hitting your front doors. +* It reduces weight at maximum leverage, and reduces maximum leverage on your linear rail. +* It lets you service your duct without disassembling your print head (did you drop a screw or piece of plastic) +* It looks sick. +* It's quiet and it moves plenty of air. + + +## BOM +* 6x m3x3.8 heat set inserts +* 2x m3x12 +* 2x m3x16 +* 2x m3x20 +* 2x m3x30 +* [The neat little layer fan from 2.2](https://www.digikey.com/product-detail/en/delta-electronics/BFB0412HHA-A117/603-1840-ND/5022816) + + +## STLs +File | Note +---- | ---- +[blower_case.stl](./blower_case.stl) | +[blower_lid.stl](./blower_lid.stl) | +[duct.stl](./duct.stl) | You might need supports. I used supporrt from platform only to keep the inside of the duct clean. +[hotend_fan_cover.stl](./hotend_fan_cover.stl) | You might need supports. I used supports on the duct seal wings to keep them a little nice. + + +## Assembly +1. You are replacing the front half of your print head. You'll need to replace the front mosquito mount with the new shroud, so tear it down a bit (leave your clockwork intact, we're not messing with that) +2. Put in the heat set inserts. 2 on top of blower_lid, 2 in the duct and the 2 on the backside of the duct for bolting the hotend case together.. +3. K sorry drill out the mount bosses on your neat little layer fan to 3mm, or snip them off. They're in the way for your screws up top. +4. And while you're disappointed, take a look at your 40mm fan. The bottom frame edge around the screws might not clear the bolt heads of your 30mm lower shroud mount screws. I snipped the frame corners a little for clearance but you might have smaller screws. +5. Assemble the front of the print head like you normally would. + + +## Known Issues +* You might want some really lightweight foam to close your duct better if your print doesn't come out perfectly. (you'll see a little gap and know you want this or you won't see a gap and you won't care) + diff --git a/printer_mods/warriorofwire/slenderfan/blower_case.stl b/printer_mods/warriorofwire/slenderfan/blower_case.stl new file mode 100644 index 000000000..1baf06561 Binary files /dev/null and b/printer_mods/warriorofwire/slenderfan/blower_case.stl differ diff --git a/printer_mods/warriorofwire/slenderfan/blower_lid.stl b/printer_mods/warriorofwire/slenderfan/blower_lid.stl new file mode 100644 index 000000000..2f888ae60 Binary files /dev/null and b/printer_mods/warriorofwire/slenderfan/blower_lid.stl differ diff --git a/printer_mods/warriorofwire/slenderfan/duct.stl b/printer_mods/warriorofwire/slenderfan/duct.stl new file mode 100644 index 000000000..39cbb5fe0 Binary files /dev/null and b/printer_mods/warriorofwire/slenderfan/duct.stl differ diff --git a/printer_mods/warriorofwire/slenderfan/hotend_fan_cover.stl b/printer_mods/warriorofwire/slenderfan/hotend_fan_cover.stl new file mode 100644 index 000000000..8ed911499 Binary files /dev/null and b/printer_mods/warriorofwire/slenderfan/hotend_fan_cover.stl differ diff --git a/printer_mods/warriorofwire/slenderfan/images/printer.png b/printer_mods/warriorofwire/slenderfan/images/printer.png new file mode 100644 index 000000000..3e166d77c Binary files /dev/null and b/printer_mods/warriorofwire/slenderfan/images/printer.png differ diff --git a/printer_mods/warriorofwire/slenderfan/images/render.png b/printer_mods/warriorofwire/slenderfan/images/render.png new file mode 100644 index 000000000..ae977475a Binary files /dev/null and b/printer_mods/warriorofwire/slenderfan/images/render.png differ diff --git a/printer_mods/warriorofwire/slenderfan/images/render_open.png b/printer_mods/warriorofwire/slenderfan/images/render_open.png new file mode 100644 index 000000000..af9c413c2 Binary files /dev/null and b/printer_mods/warriorofwire/slenderfan/images/render_open.png differ