More mods by xbst (#177)

printer_mods/README.md

@@ -110,12 +110,17 @@ like so:
 | | [Flat V2.4 Skirts](./xbst_/Flat_Skirts) | Flat V2.4 Skirts so a panel without cutouts can be used | :x: | :x: |:heavy_check_mark: |:x:|
 | | [V2.4 Fanless Middle Skirt](./xbst_/V2.4_Fanless_Middle_Skirt)| A Fanless alternative middle side skirt | :x: | :x: |:heavy_check_mark: |:x:|
 | | [Duct Mount](./xbst_/Duct_Mount) | 100mm/4" ducting mount for ventilation. Also supports umbilical cord and has 3 orientations for bowden adapter. | :x: | :x: |:heavy_check_mark: |:x:|
+| | [V2.4 Skirt Buttons](./xbst_/V2.4_Skirt_Buttons) | Skirt mod for custom Gcode macro buttons  |:x: |:x: |:heavy_check_mark: | :x: |
 | | [HOYMK SSR Mount](./xbst_/HOYMK_SSR_Mount) | Mount for Chinese HOYMK SSR | :heavy_check_mark: | :x: | :x: |:x:|
 | | [ADXL345 V0 Mount](./xbst_/ADXL345_V0_Mount) | V0 Mount for a ADXL345 module | :heavy_check_mark: |:x: |:x: |:x:|
 | | [Easy Access Rear Panels](./xbst_/Easy_Access_Rear_Panels_v0) | New rear panels designed to expose the extruder for easy filament swapping | :heavy_check_mark: | :x: |:x: |:x:|
 | | [Hat LED Mount](./xbst_/Hat_LED_Mount) | Top Hat LED module mount | :heavy_check_mark: |:x: |:x: |:x:|
 | | [ZipClip V0](./xbst_/ZipClip_v0) | Very simple ziptie mount for v0 1515 extrusions | :heavy_check_mark: |:x: |:x: |:x:|
 | | [Screwed Front Door Hinge](./xbst_/V0_Screw_Front_Hinge_Mod)| Mod to screw the front door panel (instead of VHB) | :heavy_check_mark: | :x: | :x: |:x:|
+| | [V0 Buttons & OLED Mount](./xbst_/V0_Skirt_Buttons)| Mod to mount custom Gcode macro buttons & Waveshare 1.3" OLED display | :heavy_check_mark: | :x: | :x: | :x: |
+| | [Mobius 4 (M4) V0 Mod](./xbst_/V0_M4_Mod)| Mod to mount a M4 extruder to a Voron 0 where pocketwatch extruder mounts | :heavy_check_mark: | :x: | :x: | :x: |
+| | [V0 Electronics Cover](./xbst_/V0_Electronic_Panel)| A printed cover for v0 electronics. Requires larger printer to print. | :heavy_check_mark: | :x: | :x: | :x: |
+| | [V0 PiCam Mount](./xbst_/V0_Picam)| A Raspberry Pi Camera Mount For V0 | :heavy_check_mark: | :x: | :x: | :x: |
 | | [DuetZero](./xbst_/DuetZero) | Pi Zero mount over a Duet2 for space saving | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |:x:|
 
 ---

printer_mods/xbst_/V0_Electronic_Panel/README.md

@@ -0,0 +1,4 @@
+# Electronics Cover Mod For V0
+![](./example.jpg)
+You need 4x Threaded Inserts & 4x M3 Screws.
+Also You need [HartK's Tall Feet (Actually Named Something Else) Mod](../../hartk1213/Voron0_ExtendedLegs).

printer_mods/xbst_/V0_M4_Mod/README.md

@@ -0,0 +1,25 @@
+# M4 Mod For V0
+This mod lets you mount a [Mobius 4](https://github.com/VoronDesign/Mobius-Extruder) on a [Voron 0](https://github.com/VoronDesign/Voron-0).
+
+![](./example.jpg)
+
+This mod will interfere with the rear panel if you use the printed 80T idler.
+Alternatives are either using the [Powge Voron 80T pulley](https://s.click.aliexpress.com/e/_ABNQZZ), or using my no [rear panel mod](../Easy_Access_Rear_Panels_v0).
+
+I wrote a manual for assembly. You can find that [here](./Manual.pdf).
+
+## Printed Parts Needed in M4 Files
+You need both .stl files included in the mod folder, also you need:
+- main_body_mirror.stl
+- latch_shuttle.stl
+- [a]_latch.stl
+- [a]_guidler_mirror.stl
+- [a]_5x4mm_spacer.stl
+
+## Confirmed Motors That Work
+I will edit this list if more motors are confirmed working.
+- [E3D Slimline Motor](https://e3d-online.com/collections/motors/products/motors)
+
+## Confirmed Motors That Don't Work
+- Tevo Titan Pancake Motor
+- LDO High Temp 0.9 Motor LDO-42STH25-1404MAH

printer_mods/xbst_/V0_Picam/README.md

@@ -0,0 +1,4 @@
+## V0 Raspberry Pi Camera Mount
+![](./example.jpg)
+Attaches to the corner bracket of the top hat using a longer M3 screw.
+Camera mount taken from: https://www.thingiverse.com/thing:3017729

printer_mods/xbst_/V0_Skirt_Buttons/README.md

@@ -0,0 +1,48 @@
+# V0 OLED & Switch Mount
+This mod is for mounting a Waveshare 1.3" OLED Pi Zero Hat [(Ali)](https://s.click.aliexpress.com/e/_A23Tz7) [(Amazon)](https://amzn.to/31rBzSL) & 8x 6*6 ~4.2mm Tactile Switches [(Ali)](https://s.click.aliexpress.com/e/_9wvUAv) [(Amazon)](https://amzn.to/3kmZsSH) to skirts of a Voron V0. It also hides a Pi Zero W [(Ali)](https://s.click.aliexpress.com/e/_AaYTdb) [(Amazon)](https://amzn.to/31smY9y) behind the OLED so you can save space in the rear and the bottom chamber. (Don't use with OctoPrint, Mainsail works fine)
+
+A version without the switches (just the OLED) also exists.
+
+## Instructions
+
+0. You can find instructions for the switches [in the V2.4 Skirt Buttons readme.](../V2.4_Skirt_Buttons)
+1. Insert the M3 inserts. Mount the skirts in place. For the outer screws, mount the screws to the extrusion, then slide the skirt in. Make sure it is tight enough. (This was done because wrench access holes weren't printable in that area) Then mount the inner screws, using the wrench access holes.
+2. On the Pi Zero, solder wires to highlighted pads. This is for powering the Pi and connecting to the MCU.
+	![](./Pi.png)
+3. Mount the Pi Zero in the skirts, using M2.5 standoffs as screws. Make sure the USB connectors face the bottom side.
+4. Put the OLED Hat on, screw it in with M2.5 screws.
+5. Put the button covers in the front cover, mount it with M3 screws.
+6. [Enable Pi MCU for Klipper](https://github.com/KevinOConnor/klipper/blob/master/docs/RPi_microcontroller.md)
+7. Use "sudo raspi-config" and under "Interfacing Options" enable SPI.
+8. Add these to Printer.cfg 
+``` 
+[mcu pi]
+serial: /tmp/klipper_host_mcu
+
+...
+
+[display] 
+lcd_type: sh1106 
+contrast: 236 
+vcomh: 0 
+x_offset: 0 
+invert:FALSE 
+cs_pin: pi:None 
+dc_pin: pi:gpio24 
+reset_pin: pi:gpio25
+click_pin: pi:gpio20 
+back_pin: pi:gpio21 
+up_pin: pi:gpio6 
+down_pin: pi:gpio19 
+kill_pin: pi:gpio16 
+```
+9. Change as needed. [Pinouts of the hat](https://www.waveshare.com/w/upload/4/46/1.3inch_OLED_HAT_User_Manual_EN.pdf)
+
+FYI I don't think they are needed for our use, but since I already have them I can't verify so if you have trouble install [these](https://www.waveshare.com/wiki/Libraries_Installation_for_RPi) too.
+
+### Icons used
+ https://www.iconfinder.com/iconsets/arrows-elements-outline
+ License: https://creativecommons.org/licenses/by/3.0/
+### OLED Hat Front Cover & Button Covers Modded From
+https://github.com/PiSugar/pisugar-case-pihat-cap/tree/master/1.3inch_oled_cap
+License: https://github.com/PiSugar/pisugar-case-pihat-cap/blob/master/LICENSE

printer_mods/xbst_/V0_Skirt_Buttons/Yeni Metin Belgesi.txt

@@ -1,2 +0,0 @@
-https://www.iconfinder.com/iconsets/arrows-elements-outline
-Pisugar