add switchwire cyd screen case files by Reemuson (#1041)

* feat: add switchwire cyd screen case files

* docs: added gif to README

* fix: change orientation for best print

* fix: add bridging to counterbored holes

printer_mods/Reemuson/SW_CYD_Screen_Case/.metadata.yml

@@ -0,0 +1,31 @@
+---
+# The title of your mod. Choose a short and descriptive name
+title: CYD Screen Case 
+# A short description of your mod. Try to describe your mod with 1-2 short sentences
+description: A VORON Switchwire mount-able case for the CYD screen.
+# Mod version: Set this to 1 when you are submitting a new mod. When you make changes to your mod, you may increment this number
+mod_version: 1
+# You may add your discord username here so people can contact you about your mod
+discord_username: Reemuson
+# The CAD files for your mod. Please provide them as a list.
+# Note that each mod must include at least one CAD file.
+cad:
+- CAD/Switchwire_CYD_Screen_Case_Assembly.step
+# The parts of your mod, exported and oriented ready to be sliced. Please provide them as a list.
+# Note that each mod must include at least one STL or OBJ file.
+stl:
+- STL/switchwire_cyd_case_front.stl
+- STL/switchwire_cyd_case_back.stl
+# The image files provided with your mod. These may be instructions you use in your README.md file, or other additional pictures.
+# **Note that the first image specified here will be used as cover image on mods.vorondesign.com**
+# All paths are relative to this .metadata.yml file.
+images:
+- Images/IMG_0503.JPEG
+- Images/Switchwire_CYD_Screen_Case_Parts_Exploded.gif
+- Images/IMG_0502.JPEG
+# Printer compatibility. Please specify all compatible printers as a list. The following values are accepted:
+# "V0", "V0.1", "V0.2", "V0.2r1", "V1", "V1.6", "V1.8", "V1.8r1",  "V2", "V2.1", "V2.2", "V2.4", "V2.4r1", "V2.4r2", "VSW", "VT", "VTr1", "VL"
+# Please only specify printers that you have either tested your mod on yourself, or that someone else has tested for you. If you are unsure whether your
+# mod is compatible with a certain printer, don't list it here!
+printer_compatibility:
+- VSW

printer_mods/Reemuson/SW_CYD_Screen_Case/README.md

@@ -0,0 +1,43 @@
+# Description
+
+I've always wanted to add a screen to my VORON Switchwire conversion (Aquilawire), but the prospect of the multitude of cables and parts for KlipperScreen or using the Mini 12864 screen with it's limited functionality left much to be desired.
+
+Then I found CYD-Klipper which uses the amazing Cheap Yellow Display from Brian Lough. It's an incredibly simple setup which uses local wireless communication to interface with Klipper and Moonraker to give you all of the functionality with a straightforward installation.
+
+Since there was no existing designs for a simple mount for the Switchwire, I created this.
+
+<img src="Images/Switchwire_CYD_Screen_Case_Parts_Exploded.gif" alt="Exploded parts view" width="500"/> 
+
+# Purchasables
+
+* 1x Cheap Yellow Display
+* 4x M3x12 SHCS DIN 912
+* 2x M3x20 SHCS DIN 912
+* 6x M3xD5xL4 Threaded Inserts
+
+# Assembly
+
+```console
+Materials Needed:
+
+    1x switchwire_cyd_case_front
+    1x switchwire_cyd_case_back
+    4x M3x12 SHCS DIN 912
+    2x M3x20 SHCS DIN 912
+    6x M3xD5xL4 Threaded Inserts
+
+Printing Instructions:
+
+    - Orient parts with largest face to the bed.
+    - Print all parts with 0.2mm layer height, >10% gyroid infill.
+    - No supports needed.
+
+Assembly Steps:
+
+    1. Insert the 4x threaded inserts into the holes on switchwire_cyd_case_front.
+    2. Insert the 2x threaded inserts into the holes on switchwire_cyd_case_back from the inside of the part.
+    3. With switchwire_cyd_case_front facing down on a flat surface, place the CYD ontop aligning the holes.
+    4. Place switchwire_cyd_case_back ontop of the assembly (be sure to have the orientation correct for the USB cutout).
+    5. Secure both parts in place with 4x M3x12 SHCS.
+    6. Attach the whole assembly to the Switchwire front grill with 2x M3x20 SHCS.
+```