Add Mini-Afterburner ADXL345 Mount (#333)

printer_mods/Andre/Mini_Afterburner_ADXL345_Mount/README.md

@@ -0,0 +1,30 @@
+Mini Afterburner ADXL345 Mount
+==============================
+
+A mount to attach an ADXL345 sensor to the Mini-Afterburner toolhead.
+
+
+BOM
+---
+
+- 2x M3x40 BHCS
+- 2x M3 screws (at least 4mm, preferably nylon)
+- 2x M3 heat-set insert. (3x5x4)
+
+
+Instructions
+------------
+
+- Install the M3 heat-set inserts into the 2 larger holes on the part.  
+- Remove the lowest 2 M3x35 screws from the front of the MiniAfterburner
+- Attach the mount using 2 M3x40 screws in the same holes.
+- attach the ADXL345 to the top of the mount, using m3 screws, ensure axes are oriented correctly.
+
+
+Images
+------
+
+![CAD](Images/CAD_1.png)
+![CAD](Images/CAD_2.png)
+![CAD](Images/CAD_3.png)
+![PIC](Images/PIC_1.png)

printer_mods/README.md

@@ -41,6 +41,7 @@ like so:
 | |[PL05 Sensor Mount](./al3ph/pl05_mount)|A mount PL05 inductive sensor |:heavy_check_mark:|:x:|:x:|:x:|
 |Andre|[Mini Afterburner Strain Relief](./Andre/Mini_Afterburner_Strain_Relief)|A replacement strain relief for the Mini Afterburner toolhead|:heavy_check_mark:|:x:|:x:|:x:|
 | |[V0 Neopixel Front Bed Mount](./Andre/V0_Neopixel_Front_Bed_Mount)|A replacement Front Bed Mount with room for a neopixel or dotstar behind the logo|:heavy_check_mark:|:x:|:x:|:x:|
+| |[Mini Afterburner ADXL345 Mount](./Andre/Mini_Afterburner_ADXL345_Mount)|Mount for an AXDL345 on the Mini Afterburner|:heavy_check_mark:|:x:|:x:|:x:|
 |arkeet|[Dial test indicator mount](./arkeet/dti-mount)|A toolhead mount for a dial test indicator, where the tip is located at the nozzle. |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:|
 | |[Magnetic hotend fan cover](./arkeet/magnet-fan-cover)|A replacement hotend fan cover, held with magnets instead of screws. |:x:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|
 | |[MGN12 X-axis](./arkeet/mgn12/)|Replaces the dual MGN9H rails with a single MGN12H. |:x:|:x:|:heavy_check_mark:|:x:|