From c34afb73f776b46e7405220681768bffbe236500 Mon Sep 17 00:00:00 2001 From: Florian Heilmann Date: Fri, 14 Jul 2023 15:24:54 +0200 Subject: [PATCH] Reorder Image List for mods page 1/2 --- .../MarcPot/Skirt_Mods/.metadata.yml | 14 ++++++++++++++ .../.metadata.yml | 3 +-- .../.metadata.yml | 1 - printer_mods/1-0-R/handle/.metadata.yml | 2 +- .../huvud_chain_mount/.metadata.yml | 2 +- .../Thermistor_holder_zero/.metadata.yml | 2 +- printer_mods/42bios/LED_mount/.metadata.yml | 2 +- .../cable_routing_z_belt_cover/.metadata.yml | 2 +- .../270-Clamping-Hinges/.metadata.yml | 2 +- .../.metadata.yml | 2 +- .../Revo_Nozzle_Skirt_Trident/.metadata.yml | 2 +- .../V0_Neopixel_Front_Bed_Mount/.metadata.yml | 2 +- printer_mods/Badnoob/AB-BN/.metadata.yml | 2 +- .../Badnoob/Precision_AB_Drive/.metadata.yml | 2 +- .../LoudOwl_aka_Stabby/.metadata.yml | 2 +- .../CornerPanel_SpoolHolder/.metadata.yml | 2 +- .../BlueBear/Bowden_Fence/.metadata.yml | 13 +++++++++++++ .../BlueBear/Deck_Panel_Backpack/.metadata.yml | 2 +- .../BlueBear/Wago_221_mount/.metadata.yml | 2 +- printer_mods/Boingomw/Wago_mount/.metadata.yml | 2 +- .../Bondtech/Mini-After-LGX-Lite/.metadata.yml | 2 +- .../Ch4rlesB/V0_Handles_Slim/.metadata.yml | 2 +- .../Z_Belt_Clip/.metadata.yml | 2 +- .../DC67/plug_panel_schaffner/.metadata.yml | 2 +- .../DaGlo/Voron_V0_MW_PS_Bracket/.metadata.yml | 2 +- .../DaGlo/Voron_V0_SSR_Mount/.metadata.yml | 2 +- .../Tophat_Exhaust_Filter/.metadata.yml | 2 +- .../Voron_2.4_Revo_Nozzle_Holder/.metadata.yml | 2 +- .../Derpimus/Block_handle_v0.1/.metadata.yml | 2 +- .../.metadata.yml | 17 +++++++++++++++++ .../DrGhetto/GhettoPanels/.metadata.yml | 2 +- .../ElPoPo/RemovableDoors/.metadata.yml | 2 +- printer_mods/Ellis/Bed_Fans/.metadata.yml | 2 +- .../Ellis/Single_MGN9H_Carriage/.metadata.yml | 2 +- .../.metadata.yml | 2 +- .../PowerSkirt_FN284-10-06/.metadata.yml | 2 +- .../Terminal_Blocks_NC933_SPL-62/.metadata.yml | 2 +- printer_mods/Fiction/C270_mount/.metadata.yml | 2 +- printer_mods/Fiction/Crossrail/.metadata.yml | 2 +- .../Fiction/Exhaust_cover/.metadata.yml | 2 +- .../Fiction/Exhaust_cover_SFS/.metadata.yml | 2 +- .../FreeformFez/FilteredPower/.metadata.yml | 2 +- .../Bed_Support_Alignment_Tools/.metadata.yml | 2 +- .../Cricut_Voron_Logos/.metadata.yml | 2 +- .../Galvanic/Bowden_Tube_Guide/.metadata.yml | 2 +- printer_mods/GiulianoM/FlyF407ZG/.metadata.yml | 2 +- .../.metadata.yml | 2 +- .../CAD/Ender3SW v2 STEP.zip | Bin .../CAD/Ender3SW v2.f3d | Bin .../IMAGES/BACK.PNG | Bin .../IMAGES/BOTTOM.PNG | Bin .../IMAGES/FRONT.PNG | Bin .../IMAGES/General.PNG | Bin .../IMAGES/LEFT.PNG | Bin .../IMAGES/RIGHT.PNG | Bin .../README.md | 0 .../STL/ELECTRONICS/Enclosure_Bottom_x1.stl | Bin .../STL/ELECTRONICS/Enclosure_Lid_x1.stl | Bin .../STL/ELECTRONICS/LCD-Case_Arm_x1.stl | Bin .../STL/ELECTRONICS/LCD-Case_Back_x1.stl | Bin .../STL/ELECTRONICS/LCD-Case_Front_x1.stl | Bin .../ELECTRONICS/LRS-350-24_PSU-Cover_x1.stl | Bin .../STL/ELECTRONICS/[a]_LCD-Knob_x1.stl | Bin .../STL/GANTRY/Keyback-Idler_x1.stl | Bin .../STL/GANTRY/Keyback-Mount_Back_x1.stl | Bin .../STL/GANTRY/Keyback-Mount_Front_x1.stl | Bin .../STL/GANTRY/Rail_Adapter_x1.stl | Bin .../STL/GANTRY/Upper-Block_Left_Top_x1.stl | Bin .../STL/GANTRY/Upper-Block_Right_Top_x1.stl | Bin .../STL/GANTRY/X-Motor_Holder_x1.stl | Bin .../STL/GANTRY/XZ-Block_Left_Back_x1.stl | Bin .../STL/GANTRY/XZ-Block_Left_Front_x1.stl | Bin .../STL/GANTRY/XZ-Block_Right_Back_x1.stl | Bin .../STL/GANTRY/XZ-Block_Right_Front_x1.stl | Bin .../GANTRY/Z-Bearing_Block_Chain-Mount_x1.stl | Bin .../GANTRY/Z-Bearing_Block_Left_Keybak_x1.stl | Bin .../STL/GANTRY/Z-Bearing_Block_Right_x1.stl | Bin .../STL/GANTRY/Z-Lower-Chain-Mount.stl | Bin .../STL/GANTRY/Z-Motor_Holder_x1.stl | Bin .../STL/GANTRY/[a]_Belt-Clip_x2.stl | Bin .../GANTRY/[a]_Upper-Block_Left_Base_x1.stl | Bin .../GANTRY/[a]_Upper-Block_Right_Base_x1.stl | Bin .../STL/GANTRY/[a]_XZ-Cable_Cover_x1.stl | Bin .../STL/GANTRY/keybak_gantry_anchor.stl | Bin .../STL/GANTRY/x_carriage_frame_left_x1.stl | Bin .../STL/GANTRY/x_carriage_frame_right_x1.stl | Bin .../STL/Y-ASSEMBLY/Endcap_x3.stl | Bin .../Y-ASSEMBLY/PRO/Y-Idler_Pro_Bottom_x1.stl | Bin .../STL/Y-ASSEMBLY/PRO/Y-Idler_Pro_Top_x1.stl | Bin .../Y-ASSEMBLY/PRO/Y-Motor_Mount_Pro_x1.stl | Bin .../STL/Y-ASSEMBLY/Y-Belt_Anchor_x1.stl | Bin .../STL/Y-ASSEMBLY/Y-Chain_Bed-Mount_x1.stl | Bin .../STL/Y-ASSEMBLY/Y-Chain_Frame-Mount_x1.stl | Bin .../STL/Y-ASSEMBLY/Y-Idler_Bottom_x1.stl | Bin .../STL/Y-ASSEMBLY/Y-Idler_Top_x1.stl | Bin .../STL/Y-ASSEMBLY/Y-Motor_Mount_x1.stl | Bin .../STL/Y-ASSEMBLY/[a]_Y-Belt_Clamp_x1.stl | Bin printer_mods/JD/RefillPlease/.metadata.yml | 2 +- .../JJFX/CRTouch_Snap_Mount/.metadata.yml | 2 +- printer_mods/JNP/Back-Door/.metadata.yml | 2 +- printer_mods/JNP/Drawer/.metadata.yml | 2 +- printer_mods/JNP/Front-Door/.metadata.yml | 2 +- printer_mods/JNP/Mid-Panel/.metadata.yml | 2 +- .../JNP/Neopixel-Y_Rails/.metadata.yml | 2 +- printer_mods/JNP/Side-Panels/.metadata.yml | 2 +- .../.metadata.yml | 2 +- printer_mods/Jon/1515_led_mount/.metadata.yml | 2 +- printer_mods/Jon/V0.1_Z_Cover/.metadata.yml | 10 ++++++++++ printer_mods/JosAr/Klicky-Probe/.metadata.yml | 2 +- printer_mods/KevinAkaSam/VEFACH/.metadata.yml | 2 +- .../V0_reverse_bowden_mount/.metadata.yml | 2 +- .../.metadata.yml | 2 +- .../trident_schurter_power_inlet/.metadata.yml | 2 +- printer_mods/Koios/C920_Mount/.metadata.yml | 2 +- .../Koios/V0_C920_Tophat_Mount/.metadata.yml | 2 +- .../Kruppes/Closed_Bottom/.metadata.yml | 2 +- .../Kruppes/Tension_Meter/.metadata.yml | 2 +- printer_mods/Kyleisah/CableGator/.metadata.yml | 2 +- printer_mods/LJ/Scrubby/.metadata.yml | 2 +- .../.metadata.yml | 2 +- printer_mods/LoCoCNC/ssr_strap/.metadata.yml | 2 +- .../LoganFraser/ComboInlet/.metadata.yml | 2 +- .../HorseshoeSpoolHolder/.metadata.yml | 2 +- printer_mods/LoganFraser/PiPlate/.metadata.yml | 2 +- .../LoganFraser/WagoMounts/.metadata.yml | 2 +- .../Long/Mantis_Dual_5015/.metadata.yml | 2 +- .../SSD1306_Case_Front_Cover/.metadata.yml | 2 +- .../MSA/V0-Belt-tension-helper/.metadata.yml | 2 +- .../MSiemons/TophatHingeV0.1/.metadata.yml | 2 +- .../Hartk_Mount_Galileo/.metadata.yml | 2 +- .../MasturMynd/Stealth_Zero/.metadata.yml | 2 +- .../v0.1_belted_z_drive/.metadata.yml | 2 +- .../Maverick/MiniSB_Sharkfin/.metadata.yml | 2 +- .../Maverick/V0.2_Handles/.metadata.yml | 2 +- .../Maverick/V0.2_Stealth_Skirts/.metadata.yml | 2 +- .../MrDespair/MiniAB_Pinda/.metadata.yml | 2 +- .../Phalanx/Other-V2-Idlers/.metadata.yml | 2 +- .../Printopal/Magnetic_top_panel/.metadata.yml | 2 +- .../V0-Adafruit-Y_Rails/.metadata.yml | 2 +- .../Rhastlyn/WansviewCameraMount/.metadata.yml | 2 +- printer_mods/RockNLol/RockNRoll/.metadata.yml | 2 +- .../SideSkirtPowerSwitch/.metadata.yml | 2 +- .../Shteeeeeve/V01-LED-Tophat/.metadata.yml | 2 +- .../Slidr/PanzerBalls2.4/.metadata.yml | 2 +- .../LCD_case_mod/.metadata.yml | 2 +- .../Z_drive_motor_mount/.metadata.yml | 2 +- .../StvPtrsn/320mm_Build/.metadata.yml | 2 +- .../Side_Fan_Support_No_Tape/.metadata.yml | 2 +- .../TheSquiffy/V0_Belts_holder/.metadata.yml | 2 +- .../Logitech_C270_Mount/.metadata.yml | 2 +- .../Tircown/Display_mount_5inch/.metadata.yml | 2 +- .../Tircown/Raspberry_plug_panel/.metadata.yml | 2 +- .../Tircown/V01_skirt_buttons/.metadata.yml | 2 +- .../Triano/Ender_3Pro_Switchwire/.metadata.yml | 2 +- .../Pull-out_electrical_store/.metadata.yml | 2 +- printer_mods/Zen3D/V0_1515_T-nut/.metadata.yml | 2 +- .../Zen3D/V0_MidPanel_HexPattern/.metadata.yml | 2 +- printer_mods/Zen3D/V0_Skirt/.metadata.yml | 2 +- 158 files changed, 157 insertions(+), 105 deletions(-) create mode 100644 orphaned_mods/printer_mods/MarcPot/Skirt_Mods/.metadata.yml create mode 100644 printer_mods/BlueBear/Bowden_Fence/.metadata.yml create mode 100644 printer_mods/Dr-Info/V2.4r2_Z-Drive_Motor_Tensioner_Mod_Rear_Skirts/.metadata.yml rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/.metadata.yml (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/CAD/Ender3SW v2 STEP.zip (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/CAD/Ender3SW v2.f3d (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/IMAGES/BACK.PNG (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/IMAGES/BOTTOM.PNG (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/IMAGES/FRONT.PNG (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/IMAGES/General.PNG (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/IMAGES/LEFT.PNG (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/IMAGES/RIGHT.PNG (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/README.md (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/ELECTRONICS/Enclosure_Bottom_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/ELECTRONICS/Enclosure_Lid_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/ELECTRONICS/LCD-Case_Arm_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/ELECTRONICS/LCD-Case_Back_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/ELECTRONICS/LCD-Case_Front_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/ELECTRONICS/LRS-350-24_PSU-Cover_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/ELECTRONICS/[a]_LCD-Knob_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/Keyback-Idler_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/Keyback-Mount_Back_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/Keyback-Mount_Front_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/Rail_Adapter_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/Upper-Block_Left_Top_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/Upper-Block_Right_Top_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/X-Motor_Holder_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/XZ-Block_Left_Back_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/XZ-Block_Left_Front_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/XZ-Block_Right_Back_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/XZ-Block_Right_Front_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/Z-Bearing_Block_Chain-Mount_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/Z-Bearing_Block_Left_Keybak_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/Z-Bearing_Block_Right_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/Z-Lower-Chain-Mount.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/Z-Motor_Holder_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/[a]_Belt-Clip_x2.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/[a]_Upper-Block_Left_Base_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/[a]_Upper-Block_Right_Base_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/[a]_XZ-Cable_Cover_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/keybak_gantry_anchor.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/x_carriage_frame_left_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/GANTRY/x_carriage_frame_right_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/Y-ASSEMBLY/Endcap_x3.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/Y-ASSEMBLY/PRO/Y-Idler_Pro_Bottom_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/Y-ASSEMBLY/PRO/Y-Idler_Pro_Top_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/Y-ASSEMBLY/PRO/Y-Motor_Mount_Pro_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/Y-ASSEMBLY/Y-Belt_Anchor_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/Y-ASSEMBLY/Y-Chain_Bed-Mount_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/Y-ASSEMBLY/Y-Chain_Frame-Mount_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/Y-ASSEMBLY/Y-Idler_Bottom_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/Y-ASSEMBLY/Y-Idler_Top_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/Y-ASSEMBLY/Y-Motor_Mount_x1.stl (100%) rename printer_mods/Gizzle/{ender-3_(pro)_switchwire => ender-3_pro_switchwire}/STL/Y-ASSEMBLY/[a]_Y-Belt_Clamp_x1.stl (100%) create mode 100644 printer_mods/Jon/V0.1_Z_Cover/.metadata.yml diff --git a/orphaned_mods/printer_mods/MarcPot/Skirt_Mods/.metadata.yml b/orphaned_mods/printer_mods/MarcPot/Skirt_Mods/.metadata.yml new file mode 100644 index 000000000..95bff87a0 --- /dev/null +++ b/orphaned_mods/printer_mods/MarcPot/Skirt_Mods/.metadata.yml @@ -0,0 +1,14 @@ +cad: +- CAD/Hour_Counter_Skirt.f3d +- CAD/Keystone_Skirt.f3d +description: Skirt mod for a mechanical hour counter and keystone inserts +images: +- Images/hour_counter_skirt.JPEG +- Images/hour_counter_skirt_empty.JPEG +- Images/keystone_skirt_empty.JPEG +- Images/all_skirt_mods.JPEG +- Images/keystone_skirt.JPEG +mod_version: 1 +printer_compatibility: +- V2.4 +title: Hour Counter Skirt + Keystone Skirt diff --git a/orphaned_mods/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber/.metadata.yml b/orphaned_mods/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber/.metadata.yml index 28af3b610..a08358cae 100644 --- a/orphaned_mods/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber/.metadata.yml +++ b/orphaned_mods/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber/.metadata.yml @@ -8,11 +8,10 @@ cad: - Legacy_Revisions/Rev3/CAD/purge_bucket_250mm_300mm_350mm_rev3.step description: Removeable purge bucket with nozzle scrubber images: -- Images/db.png +- Images/rev3_rev4_comparison.png - Images/Installation_Guide_rev4.png - Images/Installation_Guide_v1.8_rev4.png - Images/rev2_rev3_comparison.png -- Images/rev3_rev4_comparison.png - Legacy_Revisions/Rev1+2/Installation_Guide_rev1+2.png - Legacy_Revisions/Rev3/Installation_Guide_rev3.png mod_version: 1 diff --git a/orphaned_mods/printer_mods/edwardyeeks/V2.4_z_drive_motor_tensioner_mod/.metadata.yml b/orphaned_mods/printer_mods/edwardyeeks/V2.4_z_drive_motor_tensioner_mod/.metadata.yml index 5f126dda4..79410649a 100644 --- a/orphaned_mods/printer_mods/edwardyeeks/V2.4_z_drive_motor_tensioner_mod/.metadata.yml +++ b/orphaned_mods/printer_mods/edwardyeeks/V2.4_z_drive_motor_tensioner_mod/.metadata.yml @@ -4,7 +4,6 @@ cad: - CAD/[a]_2.4_base_plate_b_mod_x2.step description: Braced motor tensioner for z drive images: -- db.png - z_drive_mod.png mod_version: 1 printer_compatibility: diff --git a/printer_mods/1-0-R/handle/.metadata.yml b/printer_mods/1-0-R/handle/.metadata.yml index 457f3b9d8..068d3fa8a 100644 --- a/printer_mods/1-0-R/handle/.metadata.yml +++ b/printer_mods/1-0-R/handle/.metadata.yml @@ -3,9 +3,9 @@ cad: - CAD/handle.step description: Handle for Voron 2.4 images: +- images/handle.jpg - images/extrusion_with_inner_part_mounted.jpg - images/extrusion_with_handle.jpg -- images/handle.jpg - images/handle_rendering.jpg - images/extrusion_with_all_handle_parts.jpg - images/extrusion_with_tnuts.jpg diff --git a/printer_mods/120decibell/huvud_chain_mount/.metadata.yml b/printer_mods/120decibell/huvud_chain_mount/.metadata.yml index 035deeb67..1b3640f53 100644 --- a/printer_mods/120decibell/huvud_chain_mount/.metadata.yml +++ b/printer_mods/120decibell/huvud_chain_mount/.metadata.yml @@ -3,9 +3,9 @@ cad: - STEP/huvud_chain_mount_2_hole.step description: Huvud rear mount for Clockwork or LGX that supports a cable chain. images: +- images/huvud_mount_install1.png - images/huvud_chain_mount.png - images/huvud_mount_install2.png -- images/huvud_mount_install1.png mod_version: 1 printer_compatibility: - V1.8 diff --git a/printer_mods/3dpandme/Thermistor_holder_zero/.metadata.yml b/printer_mods/3dpandme/Thermistor_holder_zero/.metadata.yml index 54645b84c..920dbc4d7 100644 --- a/printer_mods/3dpandme/Thermistor_holder_zero/.metadata.yml +++ b/printer_mods/3dpandme/Thermistor_holder_zero/.metadata.yml @@ -2,8 +2,8 @@ cad: - thermistor_holder_zero.step description: Extended thermistor holder for Voron Zero images: -- thermistor_holder_comparison.png - installed.png +- thermistor_holder_comparison.png mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/42bios/LED_mount/.metadata.yml b/printer_mods/42bios/LED_mount/.metadata.yml index 844158ddb..9f3e00d64 100644 --- a/printer_mods/42bios/LED_mount/.metadata.yml +++ b/printer_mods/42bios/LED_mount/.metadata.yml @@ -1,9 +1,9 @@ cad: [] description: AngryLED - LED-mount for Lumentech LT3 profiles. images: +- AngryLED_v1_2.png - AngryLED_v1_1.png - AngryLED_v1_3.png -- AngryLED_v1_2.png - led_mount_v01_2.png - led_mount_v01_1.png - AngryLED_small_v1.png diff --git a/printer_mods/Akio/cable_routing_z_belt_cover/.metadata.yml b/printer_mods/Akio/cable_routing_z_belt_cover/.metadata.yml index 5c6058c44..47f4ba401 100644 --- a/printer_mods/Akio/cable_routing_z_belt_cover/.metadata.yml +++ b/printer_mods/Akio/cable_routing_z_belt_cover/.metadata.yml @@ -3,9 +3,9 @@ cad: - cad/cable_routing_z_belt_cover_b_mod.step description: Z belt covers that allow hidden cable routing. images: +- img/cable_routing_z_belt_cover_mod_img_3.jpg - img/cable_routing_z_belt_cover_mod_img_0.png - img/cable_routing_z_belt_cover_mod_img_1.png -- img/cable_routing_z_belt_cover_mod_img_3.jpg - img/cable_routing_z_belt_cover_mod_img_2.jpg mod_version: 1 printer_compatibility: diff --git a/printer_mods/AlexanderT-Moss/270-Clamping-Hinges/.metadata.yml b/printer_mods/AlexanderT-Moss/270-Clamping-Hinges/.metadata.yml index c4c947aef..ca33312e5 100644 --- a/printer_mods/AlexanderT-Moss/270-Clamping-Hinges/.metadata.yml +++ b/printer_mods/AlexanderT-Moss/270-Clamping-Hinges/.metadata.yml @@ -4,8 +4,8 @@ cad: description: Simple 270 degree hinges that clamp to the front panels instead of using VHB or drilled holes images: -- Images/270-Clamping-Hinges-Assembly.gif - Images/IMG_0310.png +- Images/270-Clamping-Hinges-Assembly.gif - Images/Logo-Variation-2.png - Images/Logo-Variation-0.png - Images/Logo-Variation-1.png diff --git a/printer_mods/Andre/Mini_Afterburner_ADXL345_Mount/.metadata.yml b/printer_mods/Andre/Mini_Afterburner_ADXL345_Mount/.metadata.yml index 6dd49cf26..9a5edf538 100644 --- a/printer_mods/Andre/Mini_Afterburner_ADXL345_Mount/.metadata.yml +++ b/printer_mods/Andre/Mini_Afterburner_ADXL345_Mount/.metadata.yml @@ -2,10 +2,10 @@ cad: - CAD/MiniAB_ADXL_Mount.f3d description: Mount for an AXDL345 on the Mini Afterburner images: +- Images/PIC_1.png - Images/CAD_1.png - Images/CAD_3.png - Images/CAD_2.png -- Images/PIC_1.png mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/Andre/Revo_Nozzle_Skirt_Trident/.metadata.yml b/printer_mods/Andre/Revo_Nozzle_Skirt_Trident/.metadata.yml index 1790ae24e..7f6ee4179 100644 --- a/printer_mods/Andre/Revo_Nozzle_Skirt_Trident/.metadata.yml +++ b/printer_mods/Andre/Revo_Nozzle_Skirt_Trident/.metadata.yml @@ -2,8 +2,8 @@ cad: - CAD/Trident_Revo_Nozzle_Skirt.step description: A Revo nozzle box hidden in a Trident skirt. images: -- Images/Photo-Closed.jpg - Images/Photo-Opened.jpg +- Images/Photo-Closed.jpg mod_version: 1 printer_compatibility: - VT diff --git a/printer_mods/Andre/V0_Neopixel_Front_Bed_Mount/.metadata.yml b/printer_mods/Andre/V0_Neopixel_Front_Bed_Mount/.metadata.yml index 8fa0ab227..9a9a86e7c 100644 --- a/printer_mods/Andre/V0_Neopixel_Front_Bed_Mount/.metadata.yml +++ b/printer_mods/Andre/V0_Neopixel_Front_Bed_Mount/.metadata.yml @@ -3,10 +3,10 @@ cad: description: A replacement Front Bed Mount with room for a neopixel or dotstar behind the logo images: +- Images/PIC_1.jpg - Images/CAD_1.png - Images/CAD_2.png - Images/PIC_2.jpg -- Images/PIC_1.jpg mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/Badnoob/AB-BN/.metadata.yml b/printer_mods/Badnoob/AB-BN/.metadata.yml index 548b1fb40..50fdb0c60 100644 --- a/printer_mods/Badnoob/AB-BN/.metadata.yml +++ b/printer_mods/Badnoob/AB-BN/.metadata.yml @@ -3,10 +3,10 @@ cad: - AB_BN_30.step description: Improved Afterburner with 5015 fan images: +- overview.png - fans_wires.png - wirestorage.png - ModifiedFan.png -- overview.png - AB-BN-28.png - RapidoStickout.png - fanspacer.png diff --git a/printer_mods/Badnoob/Precision_AB_Drive/.metadata.yml b/printer_mods/Badnoob/Precision_AB_Drive/.metadata.yml index e4a434237..089feb798 100644 --- a/printer_mods/Badnoob/Precision_AB_Drive/.metadata.yml +++ b/printer_mods/Badnoob/Precision_AB_Drive/.metadata.yml @@ -2,8 +2,8 @@ cad: [] description: Changes the gearing for the AB drives to improve both resolution and torque, with a strenthened frame. images: -- ABcloseup.jpg - reduction_overview.jpg +- ABcloseup.jpg - reduction.png mod_version: 1 printer_compatibility: diff --git a/printer_mods/Baltojikale/LoudOwl_aka_Stabby/.metadata.yml b/printer_mods/Baltojikale/LoudOwl_aka_Stabby/.metadata.yml index 9842806b0..8985907ba 100644 --- a/printer_mods/Baltojikale/LoudOwl_aka_Stabby/.metadata.yml +++ b/printer_mods/Baltojikale/LoudOwl_aka_Stabby/.metadata.yml @@ -4,12 +4,12 @@ cad: - CAD/LoudOwl_for_split_ABBN_untested.step description: Alternative dual 5015 part cooling fan toolhead for Afterburner images: +- Visual/LoudOwl_2.jpg - Visual/Supp_removal.jpg - Visual/LoudOWL.jpg - Visual/Wiring.jpg - Visual/comparison.jpg - Visual/Fans_in_place.jpg -- Visual/LoudOwl_2.jpg - Visual/Using_cut_tool_3.jpg - Visual/Using_cut_tool_2.jpg - Visual/Using_cut_tool_1.jpg diff --git a/printer_mods/BladeScraper-Designs/CornerPanel_SpoolHolder/.metadata.yml b/printer_mods/BladeScraper-Designs/CornerPanel_SpoolHolder/.metadata.yml index a07d22d3f..5ca331b61 100644 --- a/printer_mods/BladeScraper-Designs/CornerPanel_SpoolHolder/.metadata.yml +++ b/printer_mods/BladeScraper-Designs/CornerPanel_SpoolHolder/.metadata.yml @@ -1,9 +1,9 @@ cad: [] description: A better supported Spool Holder that mounts to a modified corner panel. images: +- IMG/IRL.jpg - IMG/Cornerpanel_Spoolholder.png - IMG/Extrude_This.png -- IMG/IRL.jpg mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/BlueBear/Bowden_Fence/.metadata.yml b/printer_mods/BlueBear/Bowden_Fence/.metadata.yml new file mode 100644 index 000000000..923276c35 --- /dev/null +++ b/printer_mods/BlueBear/Bowden_Fence/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- 1515_SnapIn_LDO.step +- 1515_SnapIn_Makerbeam.step +- BowdenFence.step +description: A little "fence" to hold the tubes away from the belts. +images: +- images/image01.jpg +- images/image02.jpg +- images/image03.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Bowden Fence diff --git a/printer_mods/BlueBear/Deck_Panel_Backpack/.metadata.yml b/printer_mods/BlueBear/Deck_Panel_Backpack/.metadata.yml index 86717fb98..2f9af1084 100644 --- a/printer_mods/BlueBear/Deck_Panel_Backpack/.metadata.yml +++ b/printer_mods/BlueBear/Deck_Panel_Backpack/.metadata.yml @@ -3,8 +3,8 @@ cad: - Deck_Panel_Backpack.step description: A mounting alternative if you don't want to drill your deck panel images: -- images/image01.jpg - images/image02.jpg +- images/image01.jpg mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/BlueBear/Wago_221_mount/.metadata.yml b/printer_mods/BlueBear/Wago_221_mount/.metadata.yml index 3a2fe4b12..839ea2f09 100644 --- a/printer_mods/BlueBear/Wago_221_mount/.metadata.yml +++ b/printer_mods/BlueBear/Wago_221_mount/.metadata.yml @@ -7,8 +7,8 @@ cad: - 1515_SnapIn_LDO.step description: Mounts for Wago 221 to screw or clip-in on 1515 extrusions images: -- images/PrintOrientation.jpg - images/ScrewMountUsage.jpg +- images/PrintOrientation.jpg - images/picSnapMount3piece.jpg - images/Mounting.jpg - images/picSnapMount5piece.jpg diff --git a/printer_mods/Boingomw/Wago_mount/.metadata.yml b/printer_mods/Boingomw/Wago_mount/.metadata.yml index 8a295632b..fd215c5df 100644 --- a/printer_mods/Boingomw/Wago_mount/.metadata.yml +++ b/printer_mods/Boingomw/Wago_mount/.metadata.yml @@ -2,9 +2,9 @@ cad: - cad/2020-Wago_221-412_tray-5x2.step description: Smaller 5 port Wago mount that fits parallel to the support rails images: +- images/Installed_Older_Version.jpg - images/5x2_front_view.png - images/5x2_back_view.png -- images/Installed_Older_Version.jpg mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/Bondtech/Mini-After-LGX-Lite/.metadata.yml b/printer_mods/Bondtech/Mini-After-LGX-Lite/.metadata.yml index 0f89eb8de..177ccf249 100644 --- a/printer_mods/Bondtech/Mini-After-LGX-Lite/.metadata.yml +++ b/printer_mods/Bondtech/Mini-After-LGX-Lite/.metadata.yml @@ -3,9 +3,9 @@ cad: - CAD/Z_Bed_adjustable_Y_offset.step description: LGX Lite Toolhead Setup For Voron V0.1. images: +- Images/mini-after-lgx-lite_header-1200x628.jpg - Images/PTFE-Cutting-Jig.jpg - Images/Hotend-Mount-Mosquito-3010-Fan.png -- Images/mini-after-lgx-lite_header-1200x628.jpg - Images/Cowling-Universal.png - Images/Hotend-Mount-Copperhead-Screw-Mount-3007-Fan.png - Images/Hotend-Mount-DRAGON-3007-Fan.png diff --git a/printer_mods/Ch4rlesB/V0_Handles_Slim/.metadata.yml b/printer_mods/Ch4rlesB/V0_Handles_Slim/.metadata.yml index 8994a8380..f594ca23f 100644 --- a/printer_mods/Ch4rlesB/V0_Handles_Slim/.metadata.yml +++ b/printer_mods/Ch4rlesB/V0_Handles_Slim/.metadata.yml @@ -1,8 +1,8 @@ cad: [] description: Simple and slim handles for the V0 images: -- Screenshot1.png - Screenshot2.png +- Screenshot1.png - Screenshot3.png mod_version: 1 printer_compatibility: diff --git a/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/.metadata.yml b/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/.metadata.yml index 6e93fb1a9..f758a98ec 100644 --- a/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/.metadata.yml +++ b/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/.metadata.yml @@ -1,9 +1,9 @@ cad: [] description: Simple clip to keep extra Z belts clean and away from panels images: +- imgs/IMG_3020.jpg - imgs/IMG_3019.jpg - imgs/IMG_3018.jpg -- imgs/IMG_3020.jpg mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/DC67/plug_panel_schaffner/.metadata.yml b/printer_mods/DC67/plug_panel_schaffner/.metadata.yml index 29b646738..afcff03b6 100644 --- a/printer_mods/DC67/plug_panel_schaffner/.metadata.yml +++ b/printer_mods/DC67/plug_panel_schaffner/.metadata.yml @@ -2,8 +2,8 @@ cad: [] description: A modified plug panel for the Power Entry Connector Schaffner FN286-10-06 with two integreated Keystone sockets. images: -- IMG_20201201_164639.jpg - IMG_20201201_164633.jpg +- IMG_20201201_164639.jpg mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/DaGlo/Voron_V0_MW_PS_Bracket/.metadata.yml b/printer_mods/DaGlo/Voron_V0_MW_PS_Bracket/.metadata.yml index 62df31d90..b2f8c414f 100644 --- a/printer_mods/DaGlo/Voron_V0_MW_PS_Bracket/.metadata.yml +++ b/printer_mods/DaGlo/Voron_V0_MW_PS_Bracket/.metadata.yml @@ -1,9 +1,9 @@ cad: [] description: Voron V0 Mean Well power supply bracket (Funssor Kit) images: +- Voron_V0_MW_PS_Bracket.jpg - Voron_V0_MW_PS_Bracket_v7_2.png - Voron_V0_MW_PS_Bracket_v7_1.png -- Voron_V0_MW_PS_Bracket.jpg mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/DaGlo/Voron_V0_SSR_Mount/.metadata.yml b/printer_mods/DaGlo/Voron_V0_SSR_Mount/.metadata.yml index 39027da65..93716076b 100644 --- a/printer_mods/DaGlo/Voron_V0_SSR_Mount/.metadata.yml +++ b/printer_mods/DaGlo/Voron_V0_SSR_Mount/.metadata.yml @@ -1,8 +1,8 @@ cad: [] description: Voron V0 SSR Mount for the bottom images: -- Voron_V0_SSR_Mount_v5_Back.png - Voron_V0_SSR_Mount_Install_Step_1.jpg +- Voron_V0_SSR_Mount_v5_Back.png - Voron_V0_SSR_Mount_Install_Step_2.jpg - Voron_V0_SSR_Mount_Install_Step_3.jpg - Voron_V0_SSR_Mount_v5_Front.png diff --git a/printer_mods/DaGrooch13/Tophat_Exhaust_Filter/.metadata.yml b/printer_mods/DaGrooch13/Tophat_Exhaust_Filter/.metadata.yml index 49ae38dfb..c54ad77ff 100644 --- a/printer_mods/DaGrooch13/Tophat_Exhaust_Filter/.metadata.yml +++ b/printer_mods/DaGrooch13/Tophat_Exhaust_Filter/.metadata.yml @@ -2,11 +2,11 @@ cad: [] description: Activated charcoal exhaust filter with HEPA that replaces the rear tophat panel images: +- Github_Images/Tophat_Install.jpg - Github_Images/Front_View.jpg - Github_Images/Side_View.jpg - Github_Images/Top_View.jpg - Github_Images/Exploded_Final_Labeled.jpg -- Github_Images/Tophat_Install.jpg - Github_Images/Asm_Front_View.jpg mod_version: 1 printer_compatibility: diff --git a/printer_mods/Daten/Voron_2.4_Revo_Nozzle_Holder/.metadata.yml b/printer_mods/Daten/Voron_2.4_Revo_Nozzle_Holder/.metadata.yml index c216c888c..cb7a104d0 100644 --- a/printer_mods/Daten/Voron_2.4_Revo_Nozzle_Holder/.metadata.yml +++ b/printer_mods/Daten/Voron_2.4_Revo_Nozzle_Holder/.metadata.yml @@ -3,10 +3,10 @@ cad: description: A skirt case for the Revo hotends to reside R1 and R2 images: - Images/Finished_Open.jpg +- Images/Open.png - Images/Finished_Closed.jpg - Images/Completed.png - Images/AllSizes.png -- Images/Open.png mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/Derpimus/Block_handle_v0.1/.metadata.yml b/printer_mods/Derpimus/Block_handle_v0.1/.metadata.yml index aa848b240..ede08aef7 100644 --- a/printer_mods/Derpimus/Block_handle_v0.1/.metadata.yml +++ b/printer_mods/Derpimus/Block_handle_v0.1/.metadata.yml @@ -1,8 +1,8 @@ cad: [] description: V0.1 Block Style Handle images: -- images/125217883-bf24e900-e28f-11eb-97ca-68b314f65b5d.jpg - images/125217901-c4823380-e28f-11eb-9288-839585f50953.jpg +- images/125217883-bf24e900-e28f-11eb-97ca-68b314f65b5d.jpg mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/Dr-Info/V2.4r2_Z-Drive_Motor_Tensioner_Mod_Rear_Skirts/.metadata.yml b/printer_mods/Dr-Info/V2.4r2_Z-Drive_Motor_Tensioner_Mod_Rear_Skirts/.metadata.yml new file mode 100644 index 000000000..723398800 --- /dev/null +++ b/printer_mods/Dr-Info/V2.4r2_Z-Drive_Motor_Tensioner_Mod_Rear_Skirts/.metadata.yml @@ -0,0 +1,17 @@ +cad: +- CAD/Filtered_Inlet_Skirt_Mod.f3d +- CAD/Filtered_Inlet_Skirt_Mod.step +- CAD/IEC-GS_1.2mm_Mod.step +- CAD/IEC-GS_1mm_Mod.step +- CAD/IEC-GS_Mod.f3d +- CAD/Keystone_Skirt_Mod.f3d +- CAD/Keystone_Skirt_Mod.step +description: This mod enables the you to utilize the rear skirts, power and keystone, in your V2.4R2 +images: +- Images/Filtered_Inlet_Skirt_Mod.JPG +- Images/IEC-GS_Skirt_Mod.JPG +- Images/Keystone_Skirt_Mod.JPG +mod_version: 1 +printer_compatibility: +- V2.4 +title: V2.4 Rear Skirt Mod for Z-Drive Motor Tensioner Mod diff --git a/printer_mods/DrGhetto/GhettoPanels/.metadata.yml b/printer_mods/DrGhetto/GhettoPanels/.metadata.yml index eefe9650f..062d552c6 100644 --- a/printer_mods/DrGhetto/GhettoPanels/.metadata.yml +++ b/printer_mods/DrGhetto/GhettoPanels/.metadata.yml @@ -1,8 +1,8 @@ cad: [] description: Printed panels for the Voron Zero images: -- images/db.png - images/ghettopanels.jpg +- images/db.png mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/ElPoPo/RemovableDoors/.metadata.yml b/printer_mods/ElPoPo/RemovableDoors/.metadata.yml index 55d771785..44e26d894 100644 --- a/printer_mods/ElPoPo/RemovableDoors/.metadata.yml +++ b/printer_mods/ElPoPo/RemovableDoors/.metadata.yml @@ -1,8 +1,8 @@ cad: [] description: New hinge to easily remove the door and have a wide opening V2.x images: -- Images/MMU.jpg - Images/Charniere_Av.jpg +- Images/MMU.jpg - Images/Charniere_Ar.jpg mod_version: 1 printer_compatibility: diff --git a/printer_mods/Ellis/Bed_Fans/.metadata.yml b/printer_mods/Ellis/Bed_Fans/.metadata.yml index 53775ac2f..3d778f16b 100644 --- a/printer_mods/Ellis/Bed_Fans/.metadata.yml +++ b/printer_mods/Ellis/Bed_Fans/.metadata.yml @@ -2,10 +2,10 @@ cad: - 5015_Bed_Fan_Mount/5015_Bed_Fan_Mount.step description: Bed fan control macros and 5015 bed fan mounts images: +- Images/5015_quad_installed.png - Images/5015_mount_isolated.png - Images/5015_triple.png - Images/5015_quad.png -- Images/5015_quad_installed.png - Images/5015_dual.png mod_version: 1 printer_compatibility: diff --git a/printer_mods/Ellis/Single_MGN9H_Carriage/.metadata.yml b/printer_mods/Ellis/Single_MGN9H_Carriage/.metadata.yml index f533eabcd..fe7a5d906 100644 --- a/printer_mods/Ellis/Single_MGN9H_Carriage/.metadata.yml +++ b/printer_mods/Ellis/Single_MGN9H_Carriage/.metadata.yml @@ -5,9 +5,9 @@ cad: - CAD/Single_MGN9H_Carriage_CW1.step description: Single MGN9H toolhead carriage with toolhead x endstop support (for umbilical) images: +- Images/Single_MGN9H_Carriage_CW1_Built.png - Images/Single_MGN9H_Carriage_CW2.png - Images/Single_MGN9H_Carriage_CW1.png -- Images/Single_MGN9H_Carriage_CW1_Built.png mod_version: 1 printer_compatibility: - V1.8 diff --git a/printer_mods/Empusas/BTT_Filament_Motion_Sensor_Mount/.metadata.yml b/printer_mods/Empusas/BTT_Filament_Motion_Sensor_Mount/.metadata.yml index 513eb0444..7f0513b5f 100644 --- a/printer_mods/Empusas/BTT_Filament_Motion_Sensor_Mount/.metadata.yml +++ b/printer_mods/Empusas/BTT_Filament_Motion_Sensor_Mount/.metadata.yml @@ -1,13 +1,13 @@ cad: [] description: Mounts for Big Tree Tech Smart Filament Motion Sensor images: +- IMG_2384.png - SKR_2.png - SKRV1_4.png - Mount_B.png - Mount_A.png - IMG_2385.png - BTT_Sensor.png -- IMG_2384.png mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/Empusas/PowerSkirt_FN284-10-06/.metadata.yml b/printer_mods/Empusas/PowerSkirt_FN284-10-06/.metadata.yml index ff02081b1..d1203d61a 100644 --- a/printer_mods/Empusas/PowerSkirt_FN284-10-06/.metadata.yml +++ b/printer_mods/Empusas/PowerSkirt_FN284-10-06/.metadata.yml @@ -1,9 +1,9 @@ cad: [] description: Power Skirt for Schaffner FN284-10-06 V2.x images: +- Screen_Shot_FN284_1.png - Screen_Shot_FN284_2.png - Screen_Shot_FN284_3.png -- Screen_Shot_FN284_1.png mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/Empusas/Terminal_Blocks_NC933_SPL-62/.metadata.yml b/printer_mods/Empusas/Terminal_Blocks_NC933_SPL-62/.metadata.yml index c2ff4324c..5678d23c9 100644 --- a/printer_mods/Empusas/Terminal_Blocks_NC933_SPL-62/.metadata.yml +++ b/printer_mods/Empusas/Terminal_Blocks_NC933_SPL-62/.metadata.yml @@ -1,8 +1,8 @@ cad: [] description: Mounts for Terminal Blocks NC933 and SPL-62 from AliExpress images: -- IMG_2333.png - IMG_2334.png +- IMG_2333.png - IMG_2335.png mod_version: 1 printer_compatibility: diff --git a/printer_mods/Fiction/C270_mount/.metadata.yml b/printer_mods/Fiction/C270_mount/.metadata.yml index cc10cbfcd..40186ffa1 100644 --- a/printer_mods/Fiction/C270_mount/.metadata.yml +++ b/printer_mods/Fiction/C270_mount/.metadata.yml @@ -3,9 +3,9 @@ cad: - CAD/C270_assembly.f3d description: Logitech C270 webcam front-centre mount images: +- Images/C270_mount.png - Images/C270_pin.jpg - Images/C270_focusing_ring.png -- Images/C270_mount.png mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/Fiction/Crossrail/.metadata.yml b/printer_mods/Fiction/Crossrail/.metadata.yml index ced4ff9f0..cb896fa05 100644 --- a/printer_mods/Fiction/Crossrail/.metadata.yml +++ b/printer_mods/Fiction/Crossrail/.metadata.yml @@ -3,6 +3,7 @@ cad: - CAD/Crossrail.step description: Across-the-rails LRS-200-24 or RSP-200-24 mount using DRP-03 brackets images: +- images/crossrail_03.jpg - images/DRP-03_01.jpg - images/DRP-03_02.jpg - images/DRP-03_03.jpg @@ -10,7 +11,6 @@ images: - images/crossrail_04.jpg - images/crossrail_05.jpg - images/crossrail_02.jpg -- images/crossrail_03.jpg - images/crossrail_01.jpg mod_version: 1 printer_compatibility: diff --git a/printer_mods/Fiction/Exhaust_cover/.metadata.yml b/printer_mods/Fiction/Exhaust_cover/.metadata.yml index 983b21a44..34d1346e6 100644 --- a/printer_mods/Fiction/Exhaust_cover/.metadata.yml +++ b/printer_mods/Fiction/Exhaust_cover/.metadata.yml @@ -3,10 +3,10 @@ cad: - CAD/Exhaust_cover.step description: Cover for exhaust cutout in back panel images: +- Images/exhaust_cover_01.png - Images/exhaust_cover_photo_02.jpg - Images/exhaust_cover_photo_01.jpg - Images/exhaust_cover_02.png -- Images/exhaust_cover_01.png mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/Fiction/Exhaust_cover_SFS/.metadata.yml b/printer_mods/Fiction/Exhaust_cover_SFS/.metadata.yml index 21665b618..6c1b925ca 100644 --- a/printer_mods/Fiction/Exhaust_cover_SFS/.metadata.yml +++ b/printer_mods/Fiction/Exhaust_cover_SFS/.metadata.yml @@ -3,10 +3,10 @@ cad: - CAD/Exhaust_cover_SFS.step description: Exhaust cover and BTT Smart Filament Sensor mount images: +- Images/exhaust_cover_sfs_photo_01.jpg - Images/Exhaust_cover_SFS_04.jpg - Images/Exhaust_cover_SFS_06.jpg - Images/Exhaust_cover_SFS_07.jpg -- Images/exhaust_cover_sfs_photo_01.jpg - Images/SFF_wiring_02.jpg - Images/SFF_wiring_01.jpg - Images/Exhaust_cover_SFS_08.jpg diff --git a/printer_mods/FreeformFez/FilteredPower/.metadata.yml b/printer_mods/FreeformFez/FilteredPower/.metadata.yml index 830ce7cb0..be613eb37 100644 --- a/printer_mods/FreeformFez/FilteredPower/.metadata.yml +++ b/printer_mods/FreeformFez/FilteredPower/.metadata.yml @@ -2,8 +2,8 @@ cad: - Parametric Filtered Power v1.8.f3d description: V1.6 Filtered Inlet and Rocker Switch for V1.8 images: -- pictures/Back.png - pictures/Front.png +- pictures/Back.png mod_version: 1 printer_compatibility: - V1.8 diff --git a/printer_mods/GadgetAngel/Bed_Support_Alignment_Tools/.metadata.yml b/printer_mods/GadgetAngel/Bed_Support_Alignment_Tools/.metadata.yml index 38f36b58e..e0f4dde48 100644 --- a/printer_mods/GadgetAngel/Bed_Support_Alignment_Tools/.metadata.yml +++ b/printer_mods/GadgetAngel/Bed_Support_Alignment_Tools/.metadata.yml @@ -6,8 +6,8 @@ description: The bed support alignment tools will assist in helping align the "b these tools so that you can screw the "bed support extrusions" down to the printer's frame in the correct position. images: -- images/Bed_Suport_Alignment_Tools_each_pointed_out.jpg - images/Bed_Support_Alignment_Tools.jpg +- images/Bed_Suport_Alignment_Tools_each_pointed_out.jpg mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/GadgetAngel/Cricut_Voron_Logos/.metadata.yml b/printer_mods/GadgetAngel/Cricut_Voron_Logos/.metadata.yml index 2e7dd1cfc..a549291ed 100644 --- a/printer_mods/GadgetAngel/Cricut_Voron_Logos/.metadata.yml +++ b/printer_mods/GadgetAngel/Cricut_Voron_Logos/.metadata.yml @@ -4,6 +4,7 @@ description: For any cutting machines or machines that rely on vector graphics a 2.4, Voron SwitchWire, Voron 0.0/0.1. and Trident These .svg files use a minimal amount of anchor points to achieve the vector shapes! images: +- images/V2.4_1Color.jpg - VSWL/1ColorLayerWOLogoWOSil/VSWRearPWOWOSilBackP.jpg - VSWL/1ColorLayerWOLogoWOSil/VSWRearPWOWOSil.jpg - VSWL/1ColorLayerWOLogoWOSil/VSWRearPWOWOSil.svg @@ -18,7 +19,6 @@ images: - images/QWComplexVL.jpg - images/CombinedRedPath.png - images/V0.1woWOSil.jpg -- images/V2.4_1Color.jpg - images/V2.4_1ColorWOWithSil.jpg - images/Trident_DLogo_250_Rear_Panel.stl.png - images/VSWRearPWOWOSilhBackP.jpg diff --git a/printer_mods/Galvanic/Bowden_Tube_Guide/.metadata.yml b/printer_mods/Galvanic/Bowden_Tube_Guide/.metadata.yml index d54cd9f78..984aea191 100644 --- a/printer_mods/Galvanic/Bowden_Tube_Guide/.metadata.yml +++ b/printer_mods/Galvanic/Bowden_Tube_Guide/.metadata.yml @@ -2,10 +2,10 @@ cad: - CAD/Bowden_Guide.step description: Bowden tube guide and CANBUS wire support images: +- IMAGES/Short.jpg - IMAGES/Tube1.jpg - IMAGES/chirpy.jpg - IMAGES/Tube_Guide.png -- IMAGES/Short.jpg - IMAGES/Dokuu.jpg - IMAGES/chirpy2.jpg mod_version: 1 diff --git a/printer_mods/GiulianoM/FlyF407ZG/.metadata.yml b/printer_mods/GiulianoM/FlyF407ZG/.metadata.yml index 1671624b6..07bef6211 100644 --- a/printer_mods/GiulianoM/FlyF407ZG/.metadata.yml +++ b/printer_mods/GiulianoM/FlyF407ZG/.metadata.yml @@ -2,8 +2,8 @@ cad: - Fly-F407ZG-Mount-v3.f3d description: 'Mount for the Fly F407ZG: https://github.com/FLYmaker/FLYF407ZG' images: -- Fly-F407ZG-Mounted.jpg - Fly-F407ZG-Printed.jpg +- Fly-F407ZG-Mounted.jpg - FlyF407ZG.PNG mod_version: 1 printer_compatibility: diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/.metadata.yml b/printer_mods/Gizzle/ender-3_pro_switchwire/.metadata.yml similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/.metadata.yml rename to printer_mods/Gizzle/ender-3_pro_switchwire/.metadata.yml index e14472ff4..57e2b1062 100644 --- a/printer_mods/Gizzle/ender-3_(pro)_switchwire/.metadata.yml +++ b/printer_mods/Gizzle/ender-3_pro_switchwire/.metadata.yml @@ -3,9 +3,9 @@ cad: description: Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics and most other parts of the Voron Switchwire. images: +- IMAGES/General.PNG - IMAGES/BOTTOM.PNG - IMAGES/LEFT.PNG -- IMAGES/General.PNG - IMAGES/BACK.PNG - IMAGES/RIGHT.PNG - IMAGES/FRONT.PNG diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/CAD/Ender3SW v2 STEP.zip b/printer_mods/Gizzle/ender-3_pro_switchwire/CAD/Ender3SW v2 STEP.zip similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/CAD/Ender3SW v2 STEP.zip rename to printer_mods/Gizzle/ender-3_pro_switchwire/CAD/Ender3SW v2 STEP.zip diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/CAD/Ender3SW v2.f3d b/printer_mods/Gizzle/ender-3_pro_switchwire/CAD/Ender3SW v2.f3d similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/CAD/Ender3SW v2.f3d rename to printer_mods/Gizzle/ender-3_pro_switchwire/CAD/Ender3SW v2.f3d diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/IMAGES/BACK.PNG b/printer_mods/Gizzle/ender-3_pro_switchwire/IMAGES/BACK.PNG similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/IMAGES/BACK.PNG rename to printer_mods/Gizzle/ender-3_pro_switchwire/IMAGES/BACK.PNG diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/IMAGES/BOTTOM.PNG b/printer_mods/Gizzle/ender-3_pro_switchwire/IMAGES/BOTTOM.PNG similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/IMAGES/BOTTOM.PNG rename to printer_mods/Gizzle/ender-3_pro_switchwire/IMAGES/BOTTOM.PNG diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/IMAGES/FRONT.PNG b/printer_mods/Gizzle/ender-3_pro_switchwire/IMAGES/FRONT.PNG similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/IMAGES/FRONT.PNG rename to printer_mods/Gizzle/ender-3_pro_switchwire/IMAGES/FRONT.PNG diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/IMAGES/General.PNG b/printer_mods/Gizzle/ender-3_pro_switchwire/IMAGES/General.PNG similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/IMAGES/General.PNG rename to printer_mods/Gizzle/ender-3_pro_switchwire/IMAGES/General.PNG diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/IMAGES/LEFT.PNG b/printer_mods/Gizzle/ender-3_pro_switchwire/IMAGES/LEFT.PNG similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/IMAGES/LEFT.PNG rename to printer_mods/Gizzle/ender-3_pro_switchwire/IMAGES/LEFT.PNG diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/IMAGES/RIGHT.PNG b/printer_mods/Gizzle/ender-3_pro_switchwire/IMAGES/RIGHT.PNG similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/IMAGES/RIGHT.PNG rename to printer_mods/Gizzle/ender-3_pro_switchwire/IMAGES/RIGHT.PNG diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/README.md b/printer_mods/Gizzle/ender-3_pro_switchwire/README.md similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/README.md rename to printer_mods/Gizzle/ender-3_pro_switchwire/README.md diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/ELECTRONICS/Enclosure_Bottom_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/ELECTRONICS/Enclosure_Bottom_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/ELECTRONICS/Enclosure_Bottom_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/ELECTRONICS/Enclosure_Bottom_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/ELECTRONICS/Enclosure_Lid_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/ELECTRONICS/Enclosure_Lid_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/ELECTRONICS/Enclosure_Lid_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/ELECTRONICS/Enclosure_Lid_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/ELECTRONICS/LCD-Case_Arm_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/ELECTRONICS/LCD-Case_Arm_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/ELECTRONICS/LCD-Case_Arm_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/ELECTRONICS/LCD-Case_Arm_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/ELECTRONICS/LCD-Case_Back_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/ELECTRONICS/LCD-Case_Back_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/ELECTRONICS/LCD-Case_Back_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/ELECTRONICS/LCD-Case_Back_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/ELECTRONICS/LCD-Case_Front_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/ELECTRONICS/LCD-Case_Front_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/ELECTRONICS/LCD-Case_Front_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/ELECTRONICS/LCD-Case_Front_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/ELECTRONICS/LRS-350-24_PSU-Cover_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/ELECTRONICS/LRS-350-24_PSU-Cover_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/ELECTRONICS/LRS-350-24_PSU-Cover_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/ELECTRONICS/LRS-350-24_PSU-Cover_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/ELECTRONICS/[a]_LCD-Knob_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/ELECTRONICS/[a]_LCD-Knob_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/ELECTRONICS/[a]_LCD-Knob_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/ELECTRONICS/[a]_LCD-Knob_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Keyback-Idler_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Keyback-Idler_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Keyback-Idler_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Keyback-Idler_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Keyback-Mount_Back_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Keyback-Mount_Back_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Keyback-Mount_Back_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Keyback-Mount_Back_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Keyback-Mount_Front_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Keyback-Mount_Front_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Keyback-Mount_Front_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Keyback-Mount_Front_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Rail_Adapter_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Rail_Adapter_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Rail_Adapter_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Rail_Adapter_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Upper-Block_Left_Top_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Upper-Block_Left_Top_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Upper-Block_Left_Top_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Upper-Block_Left_Top_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Upper-Block_Right_Top_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Upper-Block_Right_Top_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Upper-Block_Right_Top_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Upper-Block_Right_Top_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/X-Motor_Holder_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/X-Motor_Holder_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/X-Motor_Holder_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/X-Motor_Holder_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/XZ-Block_Left_Back_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/XZ-Block_Left_Back_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/XZ-Block_Left_Back_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/XZ-Block_Left_Back_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/XZ-Block_Left_Front_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/XZ-Block_Left_Front_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/XZ-Block_Left_Front_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/XZ-Block_Left_Front_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/XZ-Block_Right_Back_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/XZ-Block_Right_Back_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/XZ-Block_Right_Back_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/XZ-Block_Right_Back_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/XZ-Block_Right_Front_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/XZ-Block_Right_Front_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/XZ-Block_Right_Front_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/XZ-Block_Right_Front_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Z-Bearing_Block_Chain-Mount_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Z-Bearing_Block_Chain-Mount_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Z-Bearing_Block_Chain-Mount_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Z-Bearing_Block_Chain-Mount_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Z-Bearing_Block_Left_Keybak_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Z-Bearing_Block_Left_Keybak_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Z-Bearing_Block_Left_Keybak_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Z-Bearing_Block_Left_Keybak_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Z-Bearing_Block_Right_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Z-Bearing_Block_Right_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Z-Bearing_Block_Right_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Z-Bearing_Block_Right_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Z-Lower-Chain-Mount.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Z-Lower-Chain-Mount.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Z-Lower-Chain-Mount.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Z-Lower-Chain-Mount.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Z-Motor_Holder_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Z-Motor_Holder_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/Z-Motor_Holder_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/Z-Motor_Holder_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/[a]_Belt-Clip_x2.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/[a]_Belt-Clip_x2.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/[a]_Belt-Clip_x2.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/[a]_Belt-Clip_x2.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/[a]_Upper-Block_Left_Base_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/[a]_Upper-Block_Left_Base_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/[a]_Upper-Block_Left_Base_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/[a]_Upper-Block_Left_Base_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/[a]_Upper-Block_Right_Base_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/[a]_Upper-Block_Right_Base_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/[a]_Upper-Block_Right_Base_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/[a]_Upper-Block_Right_Base_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/[a]_XZ-Cable_Cover_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/[a]_XZ-Cable_Cover_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/[a]_XZ-Cable_Cover_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/[a]_XZ-Cable_Cover_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/keybak_gantry_anchor.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/keybak_gantry_anchor.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/keybak_gantry_anchor.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/keybak_gantry_anchor.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/x_carriage_frame_left_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/x_carriage_frame_left_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/x_carriage_frame_left_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/x_carriage_frame_left_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/x_carriage_frame_right_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/x_carriage_frame_right_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/GANTRY/x_carriage_frame_right_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/GANTRY/x_carriage_frame_right_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/Endcap_x3.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/Endcap_x3.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/Endcap_x3.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/Endcap_x3.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/PRO/Y-Idler_Pro_Bottom_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/PRO/Y-Idler_Pro_Bottom_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/PRO/Y-Idler_Pro_Bottom_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/PRO/Y-Idler_Pro_Bottom_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/PRO/Y-Idler_Pro_Top_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/PRO/Y-Idler_Pro_Top_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/PRO/Y-Idler_Pro_Top_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/PRO/Y-Idler_Pro_Top_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/PRO/Y-Motor_Mount_Pro_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/PRO/Y-Motor_Mount_Pro_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/PRO/Y-Motor_Mount_Pro_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/PRO/Y-Motor_Mount_Pro_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/Y-Belt_Anchor_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/Y-Belt_Anchor_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/Y-Belt_Anchor_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/Y-Belt_Anchor_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/Y-Chain_Bed-Mount_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/Y-Chain_Bed-Mount_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/Y-Chain_Bed-Mount_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/Y-Chain_Bed-Mount_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/Y-Chain_Frame-Mount_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/Y-Chain_Frame-Mount_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/Y-Chain_Frame-Mount_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/Y-Chain_Frame-Mount_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/Y-Idler_Bottom_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/Y-Idler_Bottom_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/Y-Idler_Bottom_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/Y-Idler_Bottom_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/Y-Idler_Top_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/Y-Idler_Top_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/Y-Idler_Top_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/Y-Idler_Top_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/Y-Motor_Mount_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/Y-Motor_Mount_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/Y-Motor_Mount_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/Y-Motor_Mount_x1.stl diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/[a]_Y-Belt_Clamp_x1.stl b/printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/[a]_Y-Belt_Clamp_x1.stl similarity index 100% rename from printer_mods/Gizzle/ender-3_(pro)_switchwire/STL/Y-ASSEMBLY/[a]_Y-Belt_Clamp_x1.stl rename to printer_mods/Gizzle/ender-3_pro_switchwire/STL/Y-ASSEMBLY/[a]_Y-Belt_Clamp_x1.stl diff --git a/printer_mods/JD/RefillPlease/.metadata.yml b/printer_mods/JD/RefillPlease/.metadata.yml index d3b081f58..27d0b7aa9 100644 --- a/printer_mods/JD/RefillPlease/.metadata.yml +++ b/printer_mods/JD/RefillPlease/.metadata.yml @@ -2,11 +2,11 @@ cad: - CAD/RefillPlease_v20.f3d description: Replace the 2.4 stock bowden tube holder and add a filament runout sensor images: +- images/interior90.png - images/refillplease.png - images/lever.png - images/Overview.png - images/notch.png -- images/interior90.png mod_version: 1 printer_compatibility: - V1.8 diff --git a/printer_mods/JJFX/CRTouch_Snap_Mount/.metadata.yml b/printer_mods/JJFX/CRTouch_Snap_Mount/.metadata.yml index ffceb3c4c..0df46dca6 100644 --- a/printer_mods/JJFX/CRTouch_Snap_Mount/.metadata.yml +++ b/printer_mods/JJFX/CRTouch_Snap_Mount/.metadata.yml @@ -1,6 +1,7 @@ cad: [] description: Mount to replace v2.4 (MGN9) probe with a Creality CR Touch images: +- Images/CRTouch-ex1_sm.jpg - Images/CRTouch-Front_sm.JPG - Images/CRTouch_Prep3_sm.jpg - Images/CRTouch-rear2_sm.JPG @@ -11,7 +12,6 @@ images: - Images/CRTouch-b1_explode_sm.JPG - Images/CRTouch_Prep0_sm.jpg - Images/CRTouch-wire1_sm.jpg -- Images/CRTouch-ex1_sm.jpg - Images/CRTouch-b1_install2_sm.JPG - Images/CRTouch-ex3_sm.jpg mod_version: 1 diff --git a/printer_mods/JNP/Back-Door/.metadata.yml b/printer_mods/JNP/Back-Door/.metadata.yml index 7a4eb1c78..030318e4b 100644 --- a/printer_mods/JNP/Back-Door/.metadata.yml +++ b/printer_mods/JNP/Back-Door/.metadata.yml @@ -4,9 +4,9 @@ cad: - CAD/Door_Latch_x2.step description: Door for easy hardware access images: +- Images/1.jpg - Images/2.jpg - Images/3.jpg -- Images/1.jpg mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/JNP/Drawer/.metadata.yml b/printer_mods/JNP/Drawer/.metadata.yml index d141d65aa..a406c0388 100644 --- a/printer_mods/JNP/Drawer/.metadata.yml +++ b/printer_mods/JNP/Drawer/.metadata.yml @@ -4,10 +4,10 @@ cad: - CAD/Drawer_Version_A.step description: Drawer in four different versions images: +- Images/1.jpg - Images/4.jpg - Images/2.jpg - Images/3.jpg -- Images/1.jpg mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/JNP/Front-Door/.metadata.yml b/printer_mods/JNP/Front-Door/.metadata.yml index f467ed232..a4eef8bb8 100644 --- a/printer_mods/JNP/Front-Door/.metadata.yml +++ b/printer_mods/JNP/Front-Door/.metadata.yml @@ -4,8 +4,8 @@ cad: - CAD/Door_Latch_x2.step description: Door in a frame images: -- Images/2.jpg - Images/1.jpg +- Images/2.jpg mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/JNP/Mid-Panel/.metadata.yml b/printer_mods/JNP/Mid-Panel/.metadata.yml index 30bcb5458..356226aea 100644 --- a/printer_mods/JNP/Mid-Panel/.metadata.yml +++ b/printer_mods/JNP/Mid-Panel/.metadata.yml @@ -3,9 +3,9 @@ cad: - CAD/Mid_Panel.step description: Panel for SKR1.4/1.4 or SKR E3 mini mount images: +- Images/1.jpg - Images/2.jpg - Images/3.JPG -- Images/1.jpg mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/JNP/Neopixel-Y_Rails/.metadata.yml b/printer_mods/JNP/Neopixel-Y_Rails/.metadata.yml index a9600fa5e..03e6cd1f8 100644 --- a/printer_mods/JNP/Neopixel-Y_Rails/.metadata.yml +++ b/printer_mods/JNP/Neopixel-Y_Rails/.metadata.yml @@ -1,9 +1,9 @@ cad: [] description: "mounting for Neopixel strip with 8 LED\xB4s" images: +- Images/1.jpg - Images/2.jpg - Images/3.jpg -- Images/1.jpg mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/JNP/Side-Panels/.metadata.yml b/printer_mods/JNP/Side-Panels/.metadata.yml index cf2762a81..bea3ef9b1 100644 --- a/printer_mods/JNP/Side-Panels/.metadata.yml +++ b/printer_mods/JNP/Side-Panels/.metadata.yml @@ -3,11 +3,11 @@ cad: - CAD/Panel left.step description: Panels with intergrated hinge images: +- Images/1.jpg - Images/4.jpg - Images/5.jpg - Images/2.jpg - Images/3.jpg -- Images/1.jpg mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/JeremyRuhland/V2.4_Plug_Panel_Generic_Combo/.metadata.yml b/printer_mods/JeremyRuhland/V2.4_Plug_Panel_Generic_Combo/.metadata.yml index bfca28a89..d3c756e69 100644 --- a/printer_mods/JeremyRuhland/V2.4_Plug_Panel_Generic_Combo/.metadata.yml +++ b/printer_mods/JeremyRuhland/V2.4_Plug_Panel_Generic_Combo/.metadata.yml @@ -3,9 +3,9 @@ cad: description: Skirt power panel for generic amazon plug/switch/fuse combo module, with 2 keystone sockets images: +- img/plug_panel_generic_combo.jpg - img/plug_panel.jpg - img/AC19A10-G8.jpg -- img/plug_panel_generic_combo.jpg mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/Jon/1515_led_mount/.metadata.yml b/printer_mods/Jon/1515_led_mount/.metadata.yml index f13ecfd4e..e066c2237 100644 --- a/printer_mods/Jon/1515_led_mount/.metadata.yml +++ b/printer_mods/Jon/1515_led_mount/.metadata.yml @@ -3,8 +3,8 @@ cad: - CAD/v0_1515_led_diffuser_assembly.step description: Snap in 1515 Led mount for WS2812B images: -- IMG/colors.jpg - IMG/led_strip.jpg +- IMG/colors.jpg - IMG/wiring.jpg - IMG/print_finish.gif mod_version: 1 diff --git a/printer_mods/Jon/V0.1_Z_Cover/.metadata.yml b/printer_mods/Jon/V0.1_Z_Cover/.metadata.yml new file mode 100644 index 000000000..67429e7f8 --- /dev/null +++ b/printer_mods/Jon/V0.1_Z_Cover/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- CAD/Bottom_panel_Airgap_Lid_v6.f3d +- CAD/Bottom_panel_Airgap_Lid_v6.step +description: A cover to stop things from dropping down the Z motor and disappearing forever. +images: +- IMG/Bottom_panel_Airgap_Lid_v4.png +mod_version: 1 +printer_compatibility: +- V0.1 +title: Z Cover for v0.1 diff --git a/printer_mods/JosAr/Klicky-Probe/.metadata.yml b/printer_mods/JosAr/Klicky-Probe/.metadata.yml index 459552155..239a037b5 100644 --- a/printer_mods/JosAr/Klicky-Probe/.metadata.yml +++ b/printer_mods/JosAr/Klicky-Probe/.metadata.yml @@ -2,6 +2,7 @@ cad: - CAD/Voron_KlickyProbe_v2_v56.step description: Microswitch based inductive probe replacement images: +- Photos/Voron_V2.4_300mm_back.jpg - Printers/v0/Photos/klicky_v0.jpg - Printers/v0/Photos/V0_dock.jpg - Printers/v0/Photos/V0.1_probe_mount_3.jpg @@ -74,7 +75,6 @@ images: - Printers/v1.8_v2.4_Legacy_Trident/Photos/ABMountCheckforContiuity.jpg - Photos/Klicky_Probe.png - Photos/Klicky_Probe_recommended_printing_orientation.png -- Photos/Voron_V2.4_300mm_back.jpg - Photos/klicky_base.jpg mod_version: 1 printer_compatibility: diff --git a/printer_mods/KevinAkaSam/VEFACH/.metadata.yml b/printer_mods/KevinAkaSam/VEFACH/.metadata.yml index 3a6068132..e1d11fd6c 100644 --- a/printer_mods/KevinAkaSam/VEFACH/.metadata.yml +++ b/printer_mods/KevinAkaSam/VEFACH/.metadata.yml @@ -1,6 +1,7 @@ cad: [] description: Voron Exhaust Filter Inserts for Activated Coal + Hepa images: +- Images/CAD1.png - Images/VEFACH.png - Images/4.jpg - Images/5.jpg @@ -8,7 +9,6 @@ images: - Images/6.jpg - Images/2.jpg - Images/Trident_V2.png -- Images/CAD1.png - Images/3.jpg - Images/1.jpg - Images/CAD3.png diff --git a/printer_mods/KiloQubit/V0_reverse_bowden_mount/.metadata.yml b/printer_mods/KiloQubit/V0_reverse_bowden_mount/.metadata.yml index 05a70f08b..76a033b34 100644 --- a/printer_mods/KiloQubit/V0_reverse_bowden_mount/.metadata.yml +++ b/printer_mods/KiloQubit/V0_reverse_bowden_mount/.metadata.yml @@ -3,8 +3,8 @@ cad: - V0_reverse_bowden_mount.f3d description: V0 reverse bowden mount images: -- mount_and_filament.jpg - mount.jpg +- mount_and_filament.jpg - mount_filament_centered.jpg mod_version: 1 printer_compatibility: diff --git a/printer_mods/KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts/.metadata.yml b/printer_mods/KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts/.metadata.yml index 5b8cce1f6..de991f685 100644 --- a/printer_mods/KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts/.metadata.yml +++ b/printer_mods/KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts/.metadata.yml @@ -2,10 +2,10 @@ cad: - VORON_2.4_Z_Chain_3_Hole_Mounts.f3d description: Z chain mounts for 3 hole generic chain images: +- upper_mount_inserts.jpg - upper_mount.jpg - z_chain.jpg - lower_mount_inserts.jpg -- upper_mount_inserts.jpg - upper_mount_with_chain.jpg mod_version: 1 printer_compatibility: diff --git a/printer_mods/KiloQubit/trident_schurter_power_inlet/.metadata.yml b/printer_mods/KiloQubit/trident_schurter_power_inlet/.metadata.yml index 7fb618fcb..4dba7c6a6 100644 --- a/printer_mods/KiloQubit/trident_schurter_power_inlet/.metadata.yml +++ b/printer_mods/KiloQubit/trident_schurter_power_inlet/.metadata.yml @@ -3,10 +3,10 @@ cad: - CAD/trident_schurter_power_inlet.step description: Trident inlet skirt for mounting a Schurter DD11.0124 or similar inlet images: +- images/IMG_7776.JPG - images/IMG_7703.JPG - images/IMG_7702.JPG - images/IMG_7701.JPG -- images/IMG_7776.JPG mod_version: 1 printer_compatibility: - VT diff --git a/printer_mods/Koios/C920_Mount/.metadata.yml b/printer_mods/Koios/C920_Mount/.metadata.yml index 346c6642e..ceccb5020 100644 --- a/printer_mods/Koios/C920_Mount/.metadata.yml +++ b/printer_mods/Koios/C920_Mount/.metadata.yml @@ -2,8 +2,8 @@ cad: - STEPs/C920_Top_Front_Mount.step description: Low profile mount for a C920 Webcam images: -- Images/FoV.png - Images/MountingPosition.jpg +- Images/FoV.png mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/Koios/V0_C920_Tophat_Mount/.metadata.yml b/printer_mods/Koios/V0_C920_Tophat_Mount/.metadata.yml index 1c2289df1..8a11bcdd3 100644 --- a/printer_mods/Koios/V0_C920_Tophat_Mount/.metadata.yml +++ b/printer_mods/Koios/V0_C920_Tophat_Mount/.metadata.yml @@ -4,9 +4,9 @@ cad: - STEPs/Cable_Clip_Tophat_Corner_x2.STEP description: Mounting bracket for a Logitech C920 on the tophat images: -- Images/Cable_Routing.jpg - Images/Mount.jpg - Images/From_Above.jpg +- Images/Cable_Routing.jpg mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/Kruppes/Closed_Bottom/.metadata.yml b/printer_mods/Kruppes/Closed_Bottom/.metadata.yml index f78565de9..99a250738 100644 --- a/printer_mods/Kruppes/Closed_Bottom/.metadata.yml +++ b/printer_mods/Kruppes/Closed_Bottom/.metadata.yml @@ -1,8 +1,8 @@ cad: [] description: Modified printed parts and panel to fully enclose V0. images: -- Fancy_Panel/fancy_dimensions.png - pictures/fancy_bottom.png +- Fancy_Panel/fancy_dimensions.png - pictures/side_view.png - pictures/back_view.png - pictures/simple_bottom.png diff --git a/printer_mods/Kruppes/Tension_Meter/.metadata.yml b/printer_mods/Kruppes/Tension_Meter/.metadata.yml index 30d7aad08..af3fd6559 100644 --- a/printer_mods/Kruppes/Tension_Meter/.metadata.yml +++ b/printer_mods/Kruppes/Tension_Meter/.metadata.yml @@ -3,8 +3,8 @@ cad: description: Print in place tension meter to easily tighten multiple belts to the same tension images: -- pictures/model.png - pictures/installed.png +- pictures/model.png mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/Kyleisah/CableGator/.metadata.yml b/printer_mods/Kyleisah/CableGator/.metadata.yml index c5802d362..c2dfa5702 100644 --- a/printer_mods/Kyleisah/CableGator/.metadata.yml +++ b/printer_mods/Kyleisah/CableGator/.metadata.yml @@ -3,12 +3,12 @@ cad: description: A cable comb for simplifying and tidying wire harnesses for printers with drag chains images: +- Images/StylishView.png - Images/Assembly1.png - Images/Assembly2.png - Images/Assembly3.png - Images/Assembly4.png - Images/LayingWires.png -- Images/StylishView.png - Images/CHOMP.png mod_version: 1 printer_compatibility: diff --git a/printer_mods/LJ/Scrubby/.metadata.yml b/printer_mods/LJ/Scrubby/.metadata.yml index a560d96fe..c2cd4d8ed 100644 --- a/printer_mods/LJ/Scrubby/.metadata.yml +++ b/printer_mods/LJ/Scrubby/.metadata.yml @@ -3,10 +3,10 @@ cad: - Scrubby.STEP description: Easy to use filament dust filter images: +- images/irl.JPG - images/built.JPG - images/back.PNG - images/front.PNG -- images/irl.JPG mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/Le0n/Magnetic_Panels_with_Magnet_Inserts/.metadata.yml b/printer_mods/Le0n/Magnetic_Panels_with_Magnet_Inserts/.metadata.yml index 8c06f5427..787592bd8 100644 --- a/printer_mods/Le0n/Magnetic_Panels_with_Magnet_Inserts/.metadata.yml +++ b/printer_mods/Le0n/Magnetic_Panels_with_Magnet_Inserts/.metadata.yml @@ -3,13 +3,13 @@ cad: - CAD/Magnetic_Panels_with_Magnet_Inserts_v2.step description: Magnetic panel mounts with magnets inserted into frame slots. images: +- Images/magnetic-panel-and-inserts-0-installed-2.jpg - Images/magnetic-panel-and-inserts-5-full-install.png - Images/magnetic-panel-and-inserts-1-magnet-insert.png - Images/magnetic-panel-and-inserts-3-inserts-in-frame-2.png - Images/magnetic-panel-and-inserts-4-clips-underside.png - Images/magnetic-panel-and-inserts-0-installed-1.jpg - Images/magnetic-panel-and-inserts-2-inserts-in-frame-1.png -- Images/magnetic-panel-and-inserts-0-installed-2.jpg - Images/magnetic-panel-and-inserts-6-jig.png mod_version: 1 printer_compatibility: diff --git a/printer_mods/LoCoCNC/ssr_strap/.metadata.yml b/printer_mods/LoCoCNC/ssr_strap/.metadata.yml index ed578a58d..6b8910e47 100644 --- a/printer_mods/LoCoCNC/ssr_strap/.metadata.yml +++ b/printer_mods/LoCoCNC/ssr_strap/.metadata.yml @@ -1,8 +1,8 @@ cad: [] description: Mounting Strap for SSR on 1515 Extrusions images: -- ssr_strap2.JPG - ssr_strap.JPG +- ssr_strap2.JPG mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/LoganFraser/ComboInlet/.metadata.yml b/printer_mods/LoganFraser/ComboInlet/.metadata.yml index 2ec829c4d..dcd971a55 100644 --- a/printer_mods/LoganFraser/ComboInlet/.metadata.yml +++ b/printer_mods/LoganFraser/ComboInlet/.metadata.yml @@ -3,8 +3,8 @@ cad: - CAD/Trident_2.4_ComboInletSkirt v8.step description: Skirt pieces for Trident, 2.4 and 2.4r2 for combo inlets in 2 sizes. images: -- BothInlet.png - ComboInlets.png +- BothInlet.png mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/LoganFraser/HorseshoeSpoolHolder/.metadata.yml b/printer_mods/LoganFraser/HorseshoeSpoolHolder/.metadata.yml index fc4fd07ac..f4acc5b14 100644 --- a/printer_mods/LoganFraser/HorseshoeSpoolHolder/.metadata.yml +++ b/printer_mods/LoganFraser/HorseshoeSpoolHolder/.metadata.yml @@ -4,9 +4,9 @@ cad: description: Horseshoe Spool Holder - mounts internally for Trident, or externally for V0, V1, or V2 printers. images: +- TIS.png - ES.png - PB.png -- TIS.png - TI.jpg mod_version: 1 printer_compatibility: diff --git a/printer_mods/LoganFraser/PiPlate/.metadata.yml b/printer_mods/LoganFraser/PiPlate/.metadata.yml index de215dbc2..ab0abe84b 100644 --- a/printer_mods/LoganFraser/PiPlate/.metadata.yml +++ b/printer_mods/LoganFraser/PiPlate/.metadata.yml @@ -3,8 +3,8 @@ cad: - PiPlate_v16.step description: PiPlate - Raspberry Pi3,4 mounting plate and Skirt Mod for V2.4/Trident images: -- PiPlate2.jpg - PiPlate.jpg +- PiPlate2.jpg mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/LoganFraser/WagoMounts/.metadata.yml b/printer_mods/LoganFraser/WagoMounts/.metadata.yml index 0e564bc3f..fcc882170 100644 --- a/printer_mods/LoganFraser/WagoMounts/.metadata.yml +++ b/printer_mods/LoganFraser/WagoMounts/.metadata.yml @@ -5,8 +5,8 @@ cad: - CAD/Wago_221-41x_Extrusion_&_Thin_Din_Mount.f3d description: Wago Mounts for Din Rail or 2020 Extrusion mounting. images: -- WagoMounts-Extrusion&Din.png - WagoMounts.png +- WagoMounts-Extrusion&Din.png mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/Long/Mantis_Dual_5015/.metadata.yml b/printer_mods/Long/Mantis_Dual_5015/.metadata.yml index acc25c0c1..87d1b1677 100644 --- a/printer_mods/Long/Mantis_Dual_5015/.metadata.yml +++ b/printer_mods/Long/Mantis_Dual_5015/.metadata.yml @@ -5,12 +5,12 @@ cad: - CAD/Mantis_MGN9_v1.0a.step description: MGN12 Dual 5015 Toolhead for 2.4 & 1.8 images: +- images/readme_mantis.jpg - images/readme_cfd_crazy_volcano.png - images/carriage_assembly_mgn9_front.jpg - images/carriage_assembly_crazy_volcano.jpg - images/final_assembly_duct_brace.jpg - images/final_assembly_adxl_front.jpg -- images/readme_mantis.jpg - images/readme_cfd_dragon.png - images/1.8_koonweee_thumb.png - images/final_assembly_rapido.jpg diff --git a/printer_mods/Lukas/SSD1306_Case_Front_Cover/.metadata.yml b/printer_mods/Lukas/SSD1306_Case_Front_Cover/.metadata.yml index 7b4d42336..3291efdeb 100644 --- a/printer_mods/Lukas/SSD1306_Case_Front_Cover/.metadata.yml +++ b/printer_mods/Lukas/SSD1306_Case_Front_Cover/.metadata.yml @@ -3,8 +3,8 @@ cad: - CAD/VoronSSD1306FrontScreen.step description: SSD1306 Mount replacement for Mini12864 images: -- images/render.PNG - images/printed.jpg +- images/render.PNG mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/MSA/V0-Belt-tension-helper/.metadata.yml b/printer_mods/MSA/V0-Belt-tension-helper/.metadata.yml index 6144eccb4..69d2ae80a 100644 --- a/printer_mods/MSA/V0-Belt-tension-helper/.metadata.yml +++ b/printer_mods/MSA/V0-Belt-tension-helper/.metadata.yml @@ -2,10 +2,10 @@ cad: - CAD/Belttool.f3d description: Belt tension helper for V0.1 images: +- Images/Belttool-img2.jpg - Images/Belttool-img1.jpg - Images/Belttool-img3.jpg - Images/Tension_tool_drawing.PNG -- Images/Belttool-img2.jpg - Images/Belttool-img6.jpg - Images/Belttool-img5.jpg - Images/Belttool-img4.jpg diff --git a/printer_mods/MSiemons/TophatHingeV0.1/.metadata.yml b/printer_mods/MSiemons/TophatHingeV0.1/.metadata.yml index 8c0482a08..2a4c664d1 100644 --- a/printer_mods/MSiemons/TophatHingeV0.1/.metadata.yml +++ b/printer_mods/MSiemons/TophatHingeV0.1/.metadata.yml @@ -5,8 +5,8 @@ cad: - STEPfiles/Tophat_Part_back_right.step description: Simple hinge for V0 Tophat images: -- Images/TopHathinge_render2.png - Images/Zoom_open.jpg +- Images/TopHathinge_render2.png - Images/Zoom_closed.jpg - Images/Tophat_open.jpg - Images/TopHathinge_render.png diff --git a/printer_mods/Majarspeed/Hartk_Mount_Galileo/.metadata.yml b/printer_mods/Majarspeed/Hartk_Mount_Galileo/.metadata.yml index edfa51dea..95658ae82 100644 --- a/printer_mods/Majarspeed/Hartk_Mount_Galileo/.metadata.yml +++ b/printer_mods/Majarspeed/Hartk_Mount_Galileo/.metadata.yml @@ -1,8 +1,8 @@ cad: [] description: It hangs stuff on your tool images: -- hbgm.jpg - AFB_mount.jpg +- hbgm.jpg mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/MasturMynd/Stealth_Zero/.metadata.yml b/printer_mods/MasturMynd/Stealth_Zero/.metadata.yml index 168c9b97c..38e81d4d9 100644 --- a/printer_mods/MasturMynd/Stealth_Zero/.metadata.yml +++ b/printer_mods/MasturMynd/Stealth_Zero/.metadata.yml @@ -3,9 +3,9 @@ cad: description: A low poly gantry with front tensioners and optional front mounted x rail images: +- Images/V0.1-Complete_Gantry.png - Images/V0.1-B_Motor_Inner_Front.png - Images/V0.1-B_Tensioner_Inner_Rear.png -- Images/V0.1-Complete_Gantry.png - Images/XY_Joint_Outer_Rear.png - Images/XY_Joint_Inner_Front.png - Images/Carriage_Endstops_Left_Rear.png diff --git a/printer_mods/MathematicalPotato/v0.1_belted_z_drive/.metadata.yml b/printer_mods/MathematicalPotato/v0.1_belted_z_drive/.metadata.yml index 7491bbe5f..fbf8f34e2 100644 --- a/printer_mods/MathematicalPotato/v0.1_belted_z_drive/.metadata.yml +++ b/printer_mods/MathematicalPotato/v0.1_belted_z_drive/.metadata.yml @@ -4,9 +4,9 @@ cad: description: Conversion to a belted Z axis for the V0.1 adapted from theFPVGeek's mod for the V0.0 images: +- Images/ZBelt-ISO-01.PNG - Images/ZBelt-ISO-03.PNG - Images/ZBelt-ISO-02.PNG -- Images/ZBelt-ISO-01.PNG - Images/m3nut_check_1.PNG - Images/ZBelt-ISO-04.PNG - Images/m3nut_check_2.PNG diff --git a/printer_mods/Maverick/MiniSB_Sharkfin/.metadata.yml b/printer_mods/Maverick/MiniSB_Sharkfin/.metadata.yml index 41b0cdb3a..e12212d44 100644 --- a/printer_mods/Maverick/MiniSB_Sharkfin/.metadata.yml +++ b/printer_mods/Maverick/MiniSB_Sharkfin/.metadata.yml @@ -1,8 +1,8 @@ cad: [] description: Modified MiniSB to use a Sharkfin Extruder images: -- Images/Sharkfin2.png - Images/Sharkfin1.png +- Images/Sharkfin2.png mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/Maverick/V0.2_Handles/.metadata.yml b/printer_mods/Maverick/V0.2_Handles/.metadata.yml index abab38c93..9c176142c 100644 --- a/printer_mods/Maverick/V0.2_Handles/.metadata.yml +++ b/printer_mods/Maverick/V0.2_Handles/.metadata.yml @@ -2,9 +2,9 @@ cad: - CAD/V0.2_Handle.step description: Add handles to the extrusion tophat images: +- Images/Handle_1.jpeg - Images/Handle_2.png - Images/Handle_3.png -- Images/Handle_1.jpeg - Images/2.png - Images/3.png - Images/1.png diff --git a/printer_mods/Maverick/V0.2_Stealth_Skirts/.metadata.yml b/printer_mods/Maverick/V0.2_Stealth_Skirts/.metadata.yml index e00e8ad64..83f3b5f81 100644 --- a/printer_mods/Maverick/V0.2_Stealth_Skirts/.metadata.yml +++ b/printer_mods/Maverick/V0.2_Stealth_Skirts/.metadata.yml @@ -3,10 +3,10 @@ cad: - CAD/V0.2_Stealth_Skirts.f3d description: Juiced up skirts for the V0.2 images: +- Images/skirts_4.png - Images/skirts_2.png - Images/skirts_3.png - Images/skirts_1.png -- Images/skirts_4.png mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/MrDespair/MiniAB_Pinda/.metadata.yml b/printer_mods/MrDespair/MiniAB_Pinda/.metadata.yml index 8d4bf7f9d..7f87b2c6a 100644 --- a/printer_mods/MrDespair/MiniAB_Pinda/.metadata.yml +++ b/printer_mods/MrDespair/MiniAB_Pinda/.metadata.yml @@ -2,11 +2,11 @@ cad: - CAD/Cowling_Dragon_v3.step description: Replacement MiniAB Cowling to add a mount for a Pinda style probe. images: +- CAD/CAD1.png - Images/ProbeInAction.jpg - Images/CAD1.png - Images/cad3.png - Images/cad2.png -- CAD/CAD1.png - CAD/cad3.png - CAD/cad2.png mod_version: 1 diff --git a/printer_mods/Phalanx/Other-V2-Idlers/.metadata.yml b/printer_mods/Phalanx/Other-V2-Idlers/.metadata.yml index 67677b865..b42050004 100644 --- a/printer_mods/Phalanx/Other-V2-Idlers/.metadata.yml +++ b/printer_mods/Phalanx/Other-V2-Idlers/.metadata.yml @@ -3,13 +3,13 @@ cad: - CAD/Other_Idler_V2.step description: Allow usage of wider toolheads on the V2 images: +- Images/front.jpg - Images/filekey.JPG - Images/heatset.jpg - Images/printset.JPG - Images/comparison.jpg - Images/Installed2.jpg - Images/Installed.jpg -- Images/front.jpg mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/Printopal/Magnetic_top_panel/.metadata.yml b/printer_mods/Printopal/Magnetic_top_panel/.metadata.yml index a103cd734..2dc1be4fa 100644 --- a/printer_mods/Printopal/Magnetic_top_panel/.metadata.yml +++ b/printer_mods/Printopal/Magnetic_top_panel/.metadata.yml @@ -1,8 +1,8 @@ cad: [] description: Top panel with magnets allows for quick installation and removal images: -- Images/Magnet.jpg - Images/Magnetic_top_panel.jpg +- Images/Magnet.jpg - Images/Split.jpg mod_version: 1 printer_compatibility: diff --git a/printer_mods/QuackProfit/V0-Adafruit-Y_Rails/.metadata.yml b/printer_mods/QuackProfit/V0-Adafruit-Y_Rails/.metadata.yml index ffbe68a81..d887e7417 100644 --- a/printer_mods/QuackProfit/V0-Adafruit-Y_Rails/.metadata.yml +++ b/printer_mods/QuackProfit/V0-Adafruit-Y_Rails/.metadata.yml @@ -1,9 +1,9 @@ cad: [] description: Mount Adafruit PCB NeoPixel Sticks on the V0 Y-rail extrusions images: +- images/wired.jpg - images/design.jpg - images/installed.jpg -- images/wired.jpg mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/Rhastlyn/WansviewCameraMount/.metadata.yml b/printer_mods/Rhastlyn/WansviewCameraMount/.metadata.yml index c8a75e55d..fc71c6dc2 100644 --- a/printer_mods/Rhastlyn/WansviewCameraMount/.metadata.yml +++ b/printer_mods/Rhastlyn/WansviewCameraMount/.metadata.yml @@ -2,11 +2,11 @@ cad: [] description: A camera mount that replaces the OEM part to allow the camera to be mounted to a 2020 extrusion images: +- Images/InstalledSideBack.jpg - Images/WansviewWebcam.PNG - Images/HardwareInstalled.jpg - Images/CameraMountingHardware_Arrows.png - Images/InstalledBackFinal.jpg -- Images/InstalledSideBack.jpg mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/RockNLol/RockNRoll/.metadata.yml b/printer_mods/RockNLol/RockNRoll/.metadata.yml index 381b070da..c982b7ff7 100644 --- a/printer_mods/RockNLol/RockNRoll/.metadata.yml +++ b/printer_mods/RockNLol/RockNRoll/.metadata.yml @@ -2,13 +2,13 @@ cad: [] description: Rockers to roll the printer on its back for easier access to the electronics compartment images: +- images/example_02.jpg - images/threaded_inserts_01.jpg - images/assembly_braces_02.jpg - images/assembly_braces_01.jpg - images/example_03.jpg - images/assembly_base_plates_03.jpg - images/assembly_base_plates_02.jpg -- images/example_02.jpg - images/assembly_base_plates_01.jpg - images/example_01.jpg - images/example_04.jpg diff --git a/printer_mods/ScramblerUSA/SideSkirtPowerSwitch/.metadata.yml b/printer_mods/ScramblerUSA/SideSkirtPowerSwitch/.metadata.yml index cf18c42e0..9c97e13ff 100644 --- a/printer_mods/ScramblerUSA/SideSkirtPowerSwitch/.metadata.yml +++ b/printer_mods/ScramblerUSA/SideSkirtPowerSwitch/.metadata.yml @@ -2,8 +2,8 @@ cad: - STEP/SkirtPower.step description: Skirt-mounted rocker switch for easy access for Voron 2.4 images: -- images/SkirtPower.png - images/SkirtPower-photo.png +- images/SkirtPower.png mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/Shteeeeeve/V01-LED-Tophat/.metadata.yml b/printer_mods/Shteeeeeve/V01-LED-Tophat/.metadata.yml index d3aac14ea..20b97627d 100644 --- a/printer_mods/Shteeeeeve/V01-LED-Tophat/.metadata.yml +++ b/printer_mods/Shteeeeeve/V01-LED-Tophat/.metadata.yml @@ -2,10 +2,10 @@ cad: - STEP/V01-LED-Tophat.step description: V0.1 LED Tophat w/ 24V LED Lightstrip images: +- Images/V01-LED-Tophat-01.jpg - Images/V0-LED-Tophat-Photo.jpg - Images/V01-LED-Tophat-03.jpg - Images/V01-LED-Tophat-02.jpg -- Images/V01-LED-Tophat-01.jpg - Images/V01-LED-Tophat-wireframe-1.jpg mod_version: 1 printer_compatibility: diff --git a/printer_mods/Slidr/PanzerBalls2.4/.metadata.yml b/printer_mods/Slidr/PanzerBalls2.4/.metadata.yml index 6a3363149..3b2b7a102 100644 --- a/printer_mods/Slidr/PanzerBalls2.4/.metadata.yml +++ b/printer_mods/Slidr/PanzerBalls2.4/.metadata.yml @@ -1,8 +1,8 @@ cad: [] description: Squash Ball Feet for V2.4 images: -- 02-Optional_z-Drive-Mod/Panzerball_zDrive_Mod.png - 01-Normal/Panzerballs.png +- 02-Optional_z-Drive-Mod/Panzerball_zDrive_Mod.png mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/Spaghetti-Bolognese/LCD_case_mod/.metadata.yml b/printer_mods/Spaghetti-Bolognese/LCD_case_mod/.metadata.yml index 6c255924f..1824d48a8 100644 --- a/printer_mods/Spaghetti-Bolognese/LCD_case_mod/.metadata.yml +++ b/printer_mods/Spaghetti-Bolognese/LCD_case_mod/.metadata.yml @@ -2,9 +2,9 @@ cad: - Mini12864_Case_Assembly.f3d description: Improvements to the V2.4 mini12864 LCD case inc E-stop button cover images: +- LCD_mod_installed.jpg - LCD_Front_mod.JPG - LCD_Front_standard.JPG -- LCD_mod_installed.jpg mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/Spaghetti-Bolognese/Z_drive_motor_mount/.metadata.yml b/printer_mods/Spaghetti-Bolognese/Z_drive_motor_mount/.metadata.yml index bec3bb017..7edf8ce3b 100644 --- a/printer_mods/Spaghetti-Bolognese/Z_drive_motor_mount/.metadata.yml +++ b/printer_mods/Spaghetti-Bolognese/Z_drive_motor_mount/.metadata.yml @@ -3,8 +3,8 @@ cad: - Z_Motor_Mount_A.f3d description: Z drive motor mount bracket mod to improve pulley to belt alignment images: -- Long_key.JPG - Small_key.JPG +- Long_key.JPG mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/StvPtrsn/320mm_Build/.metadata.yml b/printer_mods/StvPtrsn/320mm_Build/.metadata.yml index 62d00df6e..1170c95c4 100644 --- a/printer_mods/StvPtrsn/320mm_Build/.metadata.yml +++ b/printer_mods/StvPtrsn/320mm_Build/.metadata.yml @@ -4,9 +4,9 @@ cad: - CAD/side_skirt_ab_320_x2.step description: Skirts for a 320mm build images: +- Images/front.jpg - Images/side.jpg - Images/rear.jpg -- Images/front.jpg mod_version: 1 printer_compatibility: - V2.4 diff --git a/printer_mods/StvPtrsn/Side_Fan_Support_No_Tape/.metadata.yml b/printer_mods/StvPtrsn/Side_Fan_Support_No_Tape/.metadata.yml index 7d2030435..7334da552 100644 --- a/printer_mods/StvPtrsn/Side_Fan_Support_No_Tape/.metadata.yml +++ b/printer_mods/StvPtrsn/Side_Fan_Support_No_Tape/.metadata.yml @@ -10,6 +10,7 @@ cad: - CAD/[a]_60mm_fan_grill_b.step description: Mount the 60mm side fans and inserts without tape images: +- Images/side_fan_support.jpg - Images/no_grill_M3.jpg - Images/no_grill.jpg - Images/side_fan_support_M3.jpg @@ -17,7 +18,6 @@ images: - Images/insert2_M3.jpg - Images/fan1.jpg - Images/fan1_M3.jpg -- Images/side_fan_support.jpg - Images/fan2_M3.jpg - Images/insert1.jpg - Images/insert2.jpg diff --git a/printer_mods/TheSquiffy/V0_Belts_holder/.metadata.yml b/printer_mods/TheSquiffy/V0_Belts_holder/.metadata.yml index af2658940..234bdd7f0 100644 --- a/printer_mods/TheSquiffy/V0_Belts_holder/.metadata.yml +++ b/printer_mods/TheSquiffy/V0_Belts_holder/.metadata.yml @@ -1,12 +1,12 @@ cad: [] description: V0 Belts Holder images: +- Images/bh7.jpg - Images/bh10.jpg - Images/bh1.png - Images/bh3.png - Images/bh2.png - Images/bh6.png -- Images/bh7.jpg - Images/bh5.png - Images/bh4.png - Images/bh9.jpg diff --git a/printer_mods/TiagoBarata/Logitech_C270_Mount/.metadata.yml b/printer_mods/TiagoBarata/Logitech_C270_Mount/.metadata.yml index 92fd9632e..ff7bed344 100644 --- a/printer_mods/TiagoBarata/Logitech_C270_Mount/.metadata.yml +++ b/printer_mods/TiagoBarata/Logitech_C270_Mount/.metadata.yml @@ -2,8 +2,8 @@ cad: - C270_Top_Center_Mount.step description: Logitech C270 Top Center Mount images: -- C270_Top_Center_Mount_View.jpg - C270_Top_Center_Mount_1.jpg +- C270_Top_Center_Mount_View.jpg - C270_Top_Center_Mount_2.jpg mod_version: 1 printer_compatibility: diff --git a/printer_mods/Tircown/Display_mount_5inch/.metadata.yml b/printer_mods/Tircown/Display_mount_5inch/.metadata.yml index 3f2295934..0efc1f93f 100644 --- a/printer_mods/Tircown/Display_mount_5inch/.metadata.yml +++ b/printer_mods/Tircown/Display_mount_5inch/.metadata.yml @@ -1,9 +1,9 @@ cad: [] description: Tiltable mount for a 5" tactile display images: +- Images/image0.jpg - Images/Capture.JPG - Images/image1.jpg -- Images/image0.jpg - Images/image3.jpg mod_version: 1 printer_compatibility: diff --git a/printer_mods/Tircown/Raspberry_plug_panel/.metadata.yml b/printer_mods/Tircown/Raspberry_plug_panel/.metadata.yml index b136b673d..688fca91c 100644 --- a/printer_mods/Tircown/Raspberry_plug_panel/.metadata.yml +++ b/printer_mods/Tircown/Raspberry_plug_panel/.metadata.yml @@ -1,8 +1,8 @@ cad: [] description: Raspberry mount vertically in the plug panel, allow easy access to ports images: -- Images/image1.jpg - Images/image0.jpg +- Images/image1.jpg - Images/image2.jpg mod_version: 1 printer_compatibility: diff --git a/printer_mods/Tircown/V01_skirt_buttons/.metadata.yml b/printer_mods/Tircown/V01_skirt_buttons/.metadata.yml index e57415bc5..3e2187748 100644 --- a/printer_mods/Tircown/V01_skirt_buttons/.metadata.yml +++ b/printer_mods/Tircown/V01_skirt_buttons/.metadata.yml @@ -2,8 +2,8 @@ cad: - CAD/V01_skirt_button.step description: Buttons for V0.1 spec skirts images: -- Images/picture1.jpg - Images/picture0.jpg +- Images/picture1.jpg - Images/cad_split.jpg mod_version: 1 printer_compatibility: diff --git a/printer_mods/Triano/Ender_3Pro_Switchwire/.metadata.yml b/printer_mods/Triano/Ender_3Pro_Switchwire/.metadata.yml index 618749f22..f99b6b764 100644 --- a/printer_mods/Triano/Ender_3Pro_Switchwire/.metadata.yml +++ b/printer_mods/Triano/Ender_3Pro_Switchwire/.metadata.yml @@ -2,8 +2,8 @@ cad: - CAD/Ender_3_Pro_Switchwire_v15.step description: Convesion of an Ender 3 Pro or V2 to a Switchwire images: -- Images/Bottom.png - Images/SN049.jpg +- Images/Bottom.png - Images/Home.png - Images/Left.png - Images/Top.png diff --git a/printer_mods/ZZP8202/Pull-out_electrical_store/.metadata.yml b/printer_mods/ZZP8202/Pull-out_electrical_store/.metadata.yml index 270bed8e0..fe682558d 100644 --- a/printer_mods/ZZP8202/Pull-out_electrical_store/.metadata.yml +++ b/printer_mods/ZZP8202/Pull-out_electrical_store/.metadata.yml @@ -2,11 +2,11 @@ cad: - 3D/Voron_V2.4_Pull-out_electrical_store.STEP description: "Voron 2.4 Pull-out electrical store\uFF08350mm only\uFF09" images: +- Photos/Voron_V2.4_Pull-out_electrical_store.PNG - Photos/IMG_6101.jpg - Photos/IMG_6103.jpg - Photos/IMG_6107.jpg - Photos/IMG_6099.jpg -- Photos/Voron_V2.4_Pull-out_electrical_store.PNG - Photos/IMG_6105.jpg mod_version: 1 printer_compatibility: diff --git a/printer_mods/Zen3D/V0_1515_T-nut/.metadata.yml b/printer_mods/Zen3D/V0_1515_T-nut/.metadata.yml index d70e6accd..d5a6693e4 100644 --- a/printer_mods/Zen3D/V0_1515_T-nut/.metadata.yml +++ b/printer_mods/Zen3D/V0_1515_T-nut/.metadata.yml @@ -1,9 +1,9 @@ cad: [] description: M3 square and hex nuts for Voron0 1515 frame images: +- IMG1.jpg - IMG3.jpg - IMG2.jpg -- IMG1.jpg mod_version: 1 printer_compatibility: - V0.2 diff --git a/printer_mods/Zen3D/V0_MidPanel_HexPattern/.metadata.yml b/printer_mods/Zen3D/V0_MidPanel_HexPattern/.metadata.yml index 36ce77c96..702c68a19 100644 --- a/printer_mods/Zen3D/V0_MidPanel_HexPattern/.metadata.yml +++ b/printer_mods/Zen3D/V0_MidPanel_HexPattern/.metadata.yml @@ -1,8 +1,8 @@ cad: [] description: Voron0 MidPanel with Hex pattern and Wire cover images: -- IMG/V00_2.jpg - IMG/V00_1.jpg +- IMG/V00_2.jpg - IMG/V01_1.jpg - IMG/V01_2.jpg - IMG/IMG5.jpg diff --git a/printer_mods/Zen3D/V0_Skirt/.metadata.yml b/printer_mods/Zen3D/V0_Skirt/.metadata.yml index 3cb998784..acb514eae 100644 --- a/printer_mods/Zen3D/V0_Skirt/.metadata.yml +++ b/printer_mods/Zen3D/V0_Skirt/.metadata.yml @@ -1,6 +1,7 @@ cad: [] description: SSR, PowerSwitch, Adxl, Nameplate and color change printing images: +- IMG/img1.jpg - IMG/img9.jpg - IMG/img8.jpg - IMG/img5.jpg @@ -8,7 +9,6 @@ images: - IMG/img7.jpg - IMG/img3.jpg - IMG/img2.jpg -- IMG/img1.jpg mod_version: 1 printer_compatibility: - V0.2