diff --git a/printer_mods/README.md b/printer_mods/README.md
index ff2a9f4a0..9830f145c 100644
--- a/printer_mods/README.md
+++ b/printer_mods/README.md
@@ -45,6 +45,7 @@ like so:
 | hartk1213 | [Voron0_deck_panel_with_logo_and_VORON0](./hartk1213/Voron0_deck_panel_with_logo_and_VORON0) | Used @Kruppes blank deck panel to add the logo as well as the name VORON0 | :heavy_check_mark:| :x: | :x: |
 | | [Voron0_display_dualcolor](./hartk1213/Voron0_display_dualcolor) | Added a dual color file for the Voron Display Front housing | :heavy_check_mark:| :x: | :x: |
 | | [Voron0_C14Inlet](./hartk1213/Voron0_C14Inlet) | Added a new Power inlet that uses a Fused C14 plug and switch that covers the mains contacts  | :heavy_check_mark:| :x: | :x: |
+| hernsl | [Bottom Panel Mag Clip](./hernsl/bottom_panel_mag_clip) | v2.4 magnetic clips to retain bottom panel | :x: | :x: | :heavy_check_mark: |
 |hijax_pl_ |[Corner panel clip](./hijax_pl/corner_panel_clip) |V2 panel corner frames using 3-way L brackets in the corners |:x: |:x: |:heavy_check_mark: |
 | |[Din Rail mount](./hijax_pl/din_rail_mount) |Adapter to attach DIN Rail to 2020 extrusion. |:x: |:x: |:heavy_check_mark: |
 | |[Controler Board adapters](./hijax_pl/ender_compatible_controller_mount) |DIN (rotated) and legacy adapters for boards like SKR mini E3. |:grey_question: |:x: |:heavy_check_mark: |
diff --git a/printer_mods/hernsl/bottom_panel_mag_clip/README.md b/printer_mods/hernsl/bottom_panel_mag_clip/README.md
new file mode 100644
index 000000000..f4a717386
--- /dev/null
+++ b/printer_mods/hernsl/bottom_panel_mag_clip/README.md
@@ -0,0 +1,26 @@
+# Voron 2.4 Bottom Panel Magnetic Clips
+
+### OVERVIEW:
+Replaces clip & hinge bottom panel configuration with all magnetic clips, thus allowing quick removal and installation without any moving parts. 
+
+<img src="bottom_panel_maghold_panel.jpg" height=400 width=400 /> <img src="bottom_panel_maghold_skirt.jpg" height=400 width=400 />
+<img src="bottom_panel_maghold.jpg" height=800 width=800 />
+
+### BOM:
+- 24 ea 6mm x 3mm neodynium magnets
+- 6 ea M3x6 (tested w/ BHCS, should work with SHCS)
+- VHB tape
+
+### PRINTED PARTS:
+- **bottom_panel_magclip_skirt_x6.stl** - With two (2) pressfit magnets in place, is mounted to the skirt with one M3x6 fastener.
+- **bottom_panel_magclip_panel_x6.stl** - With two (2) mating pressfit magnets in place, is mounted to the exterior side of the bottom panel with VHB tape.
+
+### INSTALLATION:
+1. Print six (6) of each of the STLs. Assemble and keep together each mating pair of clips, thus ensuring proper polarity.
+2. Mount the skirt clips to the skirt, again ensuring the mating pieces do not get mixed up. It will cause problems if the polarity on any set is not the same.
+3. Place VHB tape on the panel clips. Tape is placed on the same side as the magnets, extending from the inset guide to the edge.
+4. Using whatever alignment method you are comfortable with, attach panel clips to the exterior side of the bottom panel.
+5. Ensure proper alignment among all clips, adjusting as appropriate.
+6. Remove panel and apply pressure for 24 hours for maximum bond.
+
+Note: It will be necessary to lightly pull out of the way the rubber feet depending on the size of the feet and panel.
diff --git a/printer_mods/hernsl/bottom_panel_mag_clip/bottom_panel_magclip_skirt_x6.stl b/printer_mods/hernsl/bottom_panel_mag_clip/bottom_panel_magclip_skirt_x6.stl
new file mode 100644
index 000000000..70766ea25
Binary files /dev/null and b/printer_mods/hernsl/bottom_panel_mag_clip/bottom_panel_magclip_skirt_x6.stl differ
diff --git a/printer_mods/hernsl/bottom_panel_mag_clip/bottom_panel_maghold.jpg b/printer_mods/hernsl/bottom_panel_mag_clip/bottom_panel_maghold.jpg
new file mode 100644
index 000000000..8aa4cf202
Binary files /dev/null and b/printer_mods/hernsl/bottom_panel_mag_clip/bottom_panel_maghold.jpg differ
diff --git a/printer_mods/hernsl/bottom_panel_mag_clip/bottom_panel_maghold_panel.jpg b/printer_mods/hernsl/bottom_panel_mag_clip/bottom_panel_maghold_panel.jpg
new file mode 100644
index 000000000..70f9de197
Binary files /dev/null and b/printer_mods/hernsl/bottom_panel_mag_clip/bottom_panel_maghold_panel.jpg differ
diff --git a/printer_mods/hernsl/bottom_panel_mag_clip/bottom_panel_maghold_panel_x6.stl b/printer_mods/hernsl/bottom_panel_mag_clip/bottom_panel_maghold_panel_x6.stl
new file mode 100644
index 000000000..6264ffc9b
Binary files /dev/null and b/printer_mods/hernsl/bottom_panel_mag_clip/bottom_panel_maghold_panel_x6.stl differ
diff --git a/printer_mods/hernsl/bottom_panel_mag_clip/bottom_panel_maghold_skirt.jpg b/printer_mods/hernsl/bottom_panel_mag_clip/bottom_panel_maghold_skirt.jpg
new file mode 100644
index 000000000..f47fa0f7a
Binary files /dev/null and b/printer_mods/hernsl/bottom_panel_mag_clip/bottom_panel_maghold_skirt.jpg differ