LoudOwl aka Stabby a dual 5015 mod directly swappable on Afterburner (#395)

* Create README.md

* Update README.md

* Delete printer_mods/Baltojikale directory

* Create README.md

* Add files via upload

* Delete printer_mods/Baltojikale/LoudOwl aka Stabby/STL directory

* Add files via upload

removed spaces in names

* Delete printer_mods/Baltojikale/LoudOwl aka Stabby/CAD directory

bad naming

* Add files via upload

corrected naming

* Delete printer_mods/Baltojikale/LoudOwl aka Stabby/Visual directory

incorrect naming

* Add files via upload

corrected naming

* Delete printer_mods/Baltojikale/LoudOwl aka Stabby/STL directory

wrong orientation

* Add files via upload

fixed stl orientation

* Update README.md

* Update README.md

* Update README.md

* Add files via upload

* Add files via upload

* Update README.md

text change houses>>> house

* Rename printer_mods/Baltojikale/LoudOwl aka Stabby/README.md to printer_mods/Baltojikale/LoudOwl_aka_Stabby/README.md

* Rename printer_mods/Baltojikale/LoudOwl_aka_Stabby/README.md to printer_mods/Baltojikale/LoudOwl aka StabbyREADME.md

* Rename printer_mods/Baltojikale/LoudOwl aka StabbyREADME.md to printer_mods/Baltojikale/LoudOwl aka Stabby/README.md

* Fixed name

* Delete printer_mods/Baltojikale/LoudOwl aka Stabby/STL directory

* Delete printer_mods/Baltojikale/LoudOwl aka Stabby/Visual directory

* Reuploading to LoudOwl_aka_Stabby

* Create Visual

* Delete Visual

* Add files via upload

* Add files via upload

* Add files via upload

* Delete printer_mods/Baltojikale/LoudOwl_aka_Stabby/STL/Old_need_supports directory

* Add files via upload

* Update README.md

* Delete Front_piece_supports.stl

* Delete Logo_piece_w_support.stl

* Add files via upload

* Delete Front_piece_w_supports.stl

* Add files via upload

* Delete Logo_piece_w_support.stl

* Add files via upload

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Add files via upload

* Update README.md

* Update README.md

* Add files via upload

* Update README.md

* Update README.md

* Update README.md

fixing English in readme

* Delete Back.stl

* Add files via upload

* Add files via upload

small improvements for printability

* Delete LoudOwl_V14.f3d

* Delete LoudOwl_V14.step

* Delete LoudOwl v15.f3d

* Delete LoudOwl v15.step

* Add files via upload

updated geometries

* Delete Back.stl

* Add files via upload

updated geometry

* Delete comparison.jpg

* Add files via upload

printer_mods/Baltojikale/LoudOwl_aka_Stabby/README.md

@@ -0,0 +1,42 @@
+# LoudOwl aka Stabby
+
+<img src="Visual/LoudOwl_2.jpg" width="400px" />
+<img src="Visual/LoudOWL.jpg" width="400px" />
+
+This is alternative part cooling fan solution which uses dual 5015 fan setup for Afterburner Toolhead. Replaces original parts that house 4020 fan or any other similar type of mod. This mod is more of situational add on for PLA or similar type filaments which might require a lot of cooling (or printing at super high speeds). It is not constant solution as it increases gantry weight.
+
+## Hardware
+* 2x 5015 24v fans
+* 1x M3x20 SCHS (DIN912)
+
+## Printing
+
+There are two sets of STLs. One with inbuild supports and one without (for those who trust their slicers autosupports). Tested with recommended settings for Voron parts: 4 perimeters, 5 tops/bottoms, 40% infill. Though it is possible to use less plastic to reduce weight of plastic parts: 3 perimeters, 3 tops bottoms, 15-25% infill. 
+Both versions of STL were tested by printing and assembling !!!
+
+<img src="Visual/Supp_removal.jpg" width="400px" />
+
+## Assembly
+First print out "Cut tool", check fans compatibility, if fit is acceptable remove fans top body part and cut lower part according to “Cut tool”. Insert fans into “Back piece” (adjust fit if needed by cutting additional plastic from lower fan body). Fans should hold firmly in back part. Close them with “front piece” and secure them using “logo piece” using m3x20 SCHS screw. 
+
+<img src="Visual/Using_cut_tool_2.jpg" width="400px" />
+<img src="Visual/Using_cut_tool_1.jpg" width="400px" />
+<img src="Visual/Using_cut_tool_3.jpg" width="400px" />
+<img src="Visual/Fans_in_place.jpg" width="400px" />
+
+### Optional I: 
+Cut excess wires and solder red to red black to black and additional wires of same color extend them up to your tool head connectors. 
+
+<img src="Visual/Wiring.jpg" width="400px" />
+
+### Optional II:
+Print “Fan decoration” spirals as thin as possible. Model is 0.4mm height but personally suggest to lower to 0.1 or 0.05mm as weight of these parts is enough to make vibrations on fans (which can be felt and most probably will introduce artefacts on prints. Other suggestion is to use “fan decoration” to make stencil sticker and using white paint make decoration.
+
+## Performance
+
+These two hands came from model https://www.thingiverse.com/thing:4892173 . They are printed both in Devils Design white PLA. Visible part was directed towards bed, thus it was total overhang printed on supports with interface layers. Cooling was directed with stock Afterburners hotend shroud. Personally believe that better results can be achieved with Warbird hotend shroud. 
+
+<img src="Visual/comparison.jpg" width="400px" />
+
+If you're feeling lucky !!!! 
+there is CAD model of first adaptation for ABBN 30 hotend shroud. Not tested IRL.

printer_mods/README.md

@@ -50,6 +50,7 @@ like so:
 |Badnoob |[Precision AB Drive](./Badnoob/Precision_AB_Drive)|Changes the gearing for the AB drives to improve both resolution and torque, with a strenthened frame. |:grey_question:|:grey_question:|:heavy_check_mark:|:x:|
 | |[AB-BN Afterburner mod](./Badnoob/AB-BN)|Improved Afterburner with 5015 fan |:x:|:heavy_check_mark:|:heavy_check_mark:|:grey_question:|
 | |[Rail Alignment](./Badnoob/Rail_Alignment)|Tools and procedure to properly align the rails in 2.4 and Afterburner|:x:|:x:|:heavy_check_mark:|:x:|
+|Baltojikale | [LoudOwl aka Stabby](./Baltojikale/LoudOwl_aka_Stabby) | Alternative dual 5015 part cooling fan toolhead for Afterburner | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |
 | BladeScraper-Designs | [Microswitch_Pod_With_Connector](./BladeScraper-Designs/Microswitch_Pod_With_Conector) | Microswitch pod with JST-XH 4-pin connector | :x: |:x: |:heavy_check_mark: | :x:
 | | [Horizontal-Spool-Holder](./BladeScraper-Designs/Horizontal-Spool-Holder) | Based on the stock holder but mounts to the horizontal extrusions. | :x: | :grey_question: |:heavy_check_mark: | :grey_question:
 |BlueBear|[Deck Panel Backpack](./BlueBear/Deck_Panel_Backpack)|A mounting alternative if you don't want to drill your deck panel | :heavy_check_mark: | :x: | :x: |:x:|