Update Koios's mods to be current (#243)

* Update Koios's mods to be current

Add new glass rest.  These all work on 2.4, tested on my printer.

* Fix readme/glassrest

Correct the glass rest to use fillet & readme

* Fix legacy printers warning

legacy_printers/printer_mods/Koios/6mm_Glass/README

@@ -1,3 +0,0 @@
-This is a modification of the front panel locks to support holding 6mm tempered glass panels.  I used 3m VHB to adhere them to my glass panels so that thickness was considered as well.  The tab which supports the glass was thickened and has proven to be very robust on my printer.
-
-Print the stock lock lever's to go along with these parts.

legacy_printers/printer_mods/Koios/README.MD

@@ -1,16 +0,0 @@
-# _LED_Mount_A & _LED_Mount_B
-
-This is a simple LED light bar mount for this 12V LED Strip light: https://www.banggood.com/30CM-8W-SMD5630-Waterproof-U-Shape-Dual-Row-42LEDs-Rigid-Strip-Hard-Bar-Light-DC12V-p-1255036.html
-
-You will need 1 A & 1 B mount for each strip you intend to install, and I positioned them just under my top glass (or plexi).  Beware, running these at 100% duty cycle will get very hot (~80C), and if you have plastic panels it may warp, so you will want to run them with PWM, which is fine since they are very very bright.
-
-I used m3x12 socket head screws to fasten them.
-
-
-# C920_Top_Front_Mount
-
-This is a mount for a Logitech C920 webcam for the front top extrusion on the Voron 2.  On my 350 the field of view looks like this: ![C920 Field of View](https://i.imgur.com/KBxKvGP.png)
-
-I used to M3x10 SHCS to attach to my extrusion with a couple t-nuts. 
-
-This is a video of the [Disassembly](https://www.youtube.com/watch?v=94lDYZgihT4) which you will need to perform in order to use this bracket.  Disassemble until you can get the two metal swivel joints undone, slide into the two holes on the mount, then reassemble.

legacy_printers/printer_mods/README.md

@@ -88,9 +88,6 @@ like so:
 | |[WAGO Mount](./Jink/VORON_2.1/WAGO_Mount) |Mount for 3x WAGO connectors |:heavy_check_mark: | :heavy_check_mark:| :heavy_check_mark:|
 | JustinVoelker|[Mains Plug Panel with RJ45](./JustinVoelker/VORON2) | Mains plug panel with ethernet cutout|:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |
 | K1JWG|[PanelDue 7i Custom Logo](./K1JWG/PanelDue7iLogo) |Custom Voron 2 logo for use as a PanelDue 7i startup splash screen |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: |
-|Koios |[Front Panel Locks](./Koios/6mm_Glass) |Front panel locks for 6mm tempered glass panels | :x: | :heavy_check_mark: | :grey_question:|
-| |[Logitech C920 Mount](./Koios) |Mount for C920 secured to the top front extrusion |:grey_question: |:heavy_check_mark: | :heavy_check_mark:|
-| |[LED Mounts](./Koios) |Different mounts for LED light bars |:grey_question: |:heavy_check_mark: | :heavy_check_mark:|
 |manfre |[Openbuild chain ends](./manfre/cable_chains) |Cable chain ends to use off the shelf chains with Voron parts |:x: |:heavy_check_mark: |:heavy_check_mark: |
 |masgar |[VoltAmpMeter panel insert](./masgar/VoltAmpMeter_Panel_Insert)   | Mounting panel for VoltAmpMeter | :heavy_check_mark: |:x: |:x: |
 | |[BTT SKR Mini v1.1 mounting frame](./masgar/BTT_SKR_Mini_v1.1_mounting_frame)   | Mounting frame for BigTreeTech SKR Mini v1.1 | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |

printer_mods/Koios/6mm_Glass/README.md

@@ -0,0 +1,10 @@
+# Glass mount
+
+This is a modification of the front panel locks from 2.1 to support holding 6mm tempered glass panels.  I used 3m VHB to adhere them to my glass panels so that thickness was considered as well.  The tab which supports the glass was thickened and has proven to be very robust on my printer. This can be run with 2.4 without issue, using panel sizes from the 2.1 bom.
+
+I've also added 'Glass_Rest.stl' & the step file to secure the side panels with quick releases as well.  This is necessary as the glass is quite heavy and the lock levers wont hold it from sliding.
+
+Print the stock lock 2.1 levers [here](https://github.com/VoronDesign/Voron-2/tree/Voron2.1/STLs/VORON2.1/panel_mounting/front_panel_locks) to go along with these parts.
+
+Here is the finished assembly in production:
+![Glass panels on a voron 2.4](./Images/Glass.jpg)

printer_mods/Koios/C920_Mount/README.md

@@ -0,0 +1,10 @@
+# C920 Mount
+
+This is a mount for a Logitech C920 webcam for the front top extrusion on the Voron 2.  On my 350 the field of view looks like this: ![C920 Field of View](./Images/FoV.png).  
+
+This is how it looks mounted in the printer:
+![Mounting position](./Images/MountingPosition.jpg)
+
+I used to M3x10 SHCS to attach to my extrusion with a couple t-nuts. 
+
+This is a video of the [Disassembly](https://www.youtube.com/watch?v=94lDYZgihT4) which you will need to perform in order to use this bracket.  Disassemble until you can get the two metal swivel joints undone, slide into the two holes on the mount, then reassemble.

printer_mods/Koios/LED_Mounts/README.md

@@ -1,7 +1,13 @@
+# LED Mounts
+
 This is a simple LED light bar mount for this 12V LED Strip light: https://www.banggood.com/30CM-8W-SMD5630-Waterproof-U-Shape-Dual-Row-42LEDs-Rigid-Strip-Hard-Bar-Light-DC12V-p-1255036.html
 
+I run this off a 12V power supply, and groundside switch it on an SKR: https://www.digikey.ca/en/products/detail/cui-inc/VGS-25-12/2045660
+
 You will need 1 A & 1 B mount for each strip you intend to install, and I positioned them just under my top glass (or plexi).  Beware, running these at 100% duty cycle will get very hot (~80C), and if you have plastic panels it may warp, so you will want to run them with PWM, which is fine since they are very very bright.
 
 I used m3x12 socket head screws to fasten them.
 
-
+This is how the finished project looks:
+![View From Above](./Images/FromAbove.jpg)
+![View From Below](./Images/FromBelow.jpg)

printer_mods/Koios/README.MD

@@ -0,0 +1,11 @@
+# LED Mounts
+
+This is a simple LED light bar mount for 2.4, mounts in the top extrusions.
+
+# C920 Mount
+
+Mount a C920 at the top front of your printer, for maximum field of view and minimal space, also allows neat cable routing.
+
+# Glass mount
+
+Using the 2.1 panel sizes, I mounted 6mm thick tempered glass panels on my voron.  These files allow the locking latches to secure the panels to the front & sides of the printer. This works fine with 2.4.

printer_mods/README.md

@@ -93,6 +93,9 @@ like so:
 | KiloQubit | [V0 Reverse Bowden Mount](./KiloQubit/V0_reverse_bowden_mount)| V0 reverse bowden mount | :heavy_check_mark: | :x: | :x: |:x:|
 | | [V2.4 Z Chain Mounts for 3 Hole Chains](./KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts)| Z chain mounts for 3 hole generic chain | :x: | :x: | :heavy_check_mark: |:x:|
 | kirby | [V0 Sherpa Mini Direct Drive Mod](./kirby/v0_sherpa_mini_direct_drive)| A direct drive mod for the V0 using the Annex Sherpa Mini extruder | :heavy_check_mark: | :x: | :x: |:x:|
+| Koios | [6mm Tempered Glass Mod](./Koios/6mm_Glass) | Lock levers and rests for 6mm Tempered glass panels | :x: | :x:| :heavy_check_mark: | :x: |
+| | [C920 Low Profile Mount](./Koios/C920_Mount) | Low profile mount for a C920 Webcam | :x: | :x: | :heavy_check_mark: | :x: |
+| | [LED Bar Mounts](./Koios/LED_Mounts) | Low profile mount for led bar lights | :x: | :x: | :heavy_check_mark: | :x: |
 | Kruppes |[Belt Tension Meter](./Kruppes/Tension_Meter) | Print in place tension meter to easily tighten multiple belts to the same tension |:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark:|
 | |[Encosed Bottom](./Kruppes/Closed_Bottom) | Modified printed parts and panel to fully enclose V0. |:heavy_check_mark: |:x: |:x: |:x:|
 | |[V0 Printed Deck with inserts](./Kruppes/Deck_Panel_inserts_logo) |Electronics Deck Panel using brass heat inserts. Optional with accent color Voron Logo. |:heavy_check_mark: |:x: |:x: |:x:|