diff --git a/legacy_printers/printer_mods/README.md b/legacy_printers/printer_mods/README.md index dfb9c80c6..773cdefbc 100644 --- a/legacy_printers/printer_mods/README.md +++ b/legacy_printers/printer_mods/README.md @@ -60,8 +60,7 @@ like so: |Gamsche | [Keystone Skirt Panel](./Gamsche/skirt_keystone)| 25mm skirt panel with integrated keystone jack. Use with 50mm smaller adjacent skirts for proper fit. |:grey_question: |:grey_question: |:heavy_check_mark:| |Glowtape | [MKS GenL 1.0 Mounting Bracket](./Glowtape)| MKS GenL 1.0 Mounting Bracket|:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark:| |GustavTheMighty | [4.3 PanelDue Case](./GustavtheMighty/4.3-Paneldue_Case)|Case/mount for the 4.3 PanelDue LCD Display |:heavy_check_mark: | :heavy_check_mark: |:heavy_check_mark: | -|Iakabos| [c920_Mount](./Iakabos/C920_mount)|Slim mount for logitech c920 webcam|:grey_question:|:heavy_check_mark:|:heavy_check_mark:| -| | [Mini12864 Display Mount](./Iakabos/Mini12864_display_mount)|Case and mounting arms for a Fysetc Mini12864 display |:grey_question: |:heavy_check_mark: |:heavy_check_mark: | +|Iakabos| [Mini12864 Display Mount](./Iakabos/Mini12864_display_mount)|Case and mounting arms for a Fysetc Mini12864 display |:grey_question: |:heavy_check_mark: |:heavy_check_mark: | | Hackdoggo| [BMGobius](./hackdoggo/v2/bmgobius)|Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears |:heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | |hiemmer | [Tool Holders](./hiemmer/Tool_Holders)| Tool holder for calipers, screwdriver etc| :grey_question:| :grey_question:|:grey_question: | |JaredC01 | [Mini 12864 Voron Knob](./JaredC01/Mini_12864_Voron_Knob) | Upgraded knob for Fystec Mini 12864 RGB LED Display | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | diff --git a/legacy_printers/printer_mods/Iakabos/C920_mount/C920_Mount_Slim.stl b/printer_mods/Iakabos/C920_mount/C920_Mount_Slim.stl similarity index 100% rename from legacy_printers/printer_mods/Iakabos/C920_mount/C920_Mount_Slim.stl rename to printer_mods/Iakabos/C920_mount/C920_Mount_Slim.stl diff --git a/legacy_printers/printer_mods/Iakabos/C920_mount/README.md b/printer_mods/Iakabos/C920_mount/README.md similarity index 100% rename from legacy_printers/printer_mods/Iakabos/C920_mount/README.md rename to printer_mods/Iakabos/C920_mount/README.md diff --git a/printer_mods/Iakabos/V0_beltchain/Mod_Beltchain0_Anchor_Closed.stl b/printer_mods/Iakabos/V0_beltchain/Mod_Beltchain0_Anchor_Closed.stl new file mode 100644 index 000000000..51e2426e1 Binary files /dev/null and b/printer_mods/Iakabos/V0_beltchain/Mod_Beltchain0_Anchor_Closed.stl differ diff --git a/printer_mods/Iakabos/V0_beltchain/Mod_Beltchain0_Anchor_Open.stl b/printer_mods/Iakabos/V0_beltchain/Mod_Beltchain0_Anchor_Open.stl new file mode 100644 index 000000000..563c50c51 Binary files /dev/null and b/printer_mods/Iakabos/V0_beltchain/Mod_Beltchain0_Anchor_Open.stl differ diff --git a/printer_mods/Iakabos/V0_beltchain/Mod_Beltchain0_Link_Slotted.stl b/printer_mods/Iakabos/V0_beltchain/Mod_Beltchain0_Link_Slotted.stl new file mode 100644 index 000000000..44c59e260 Binary files /dev/null and b/printer_mods/Iakabos/V0_beltchain/Mod_Beltchain0_Link_Slotted.stl differ diff --git a/printer_mods/Iakabos/V0_beltchain/README.md b/printer_mods/Iakabos/V0_beltchain/README.md new file mode 100644 index 000000000..5322b0380 --- /dev/null +++ b/printer_mods/Iakabos/V0_beltchain/README.md @@ -0,0 +1,10 @@ +These files are for printed replacement chains for the z-axis on V0 printers. +The original "stock" parts were created by Tinpec and included here for convenience. + +The modified "anchor" pieces replace both the original "top" and "adapter pieces. +You only need one anchor piece; there are two slightly different versions, with one having more clearance for bulky wires and the other being a little more polished. + +The "link_slotted" piece is intended to replace some of the original links towards the lower end of the chain where it will not move. They slot into the 1515 extrusions. + +In summary, for a stock build size you will need one "stock_bottom", 18 "links" (with up to 8 being the "slotted" variant), and one top anchor (this can be "anchor_closed", "anchor_open", or both of "top" and "adapter" +To assemble this chain you will also need a small length of 6mm 2GT belt and some 1.75mm filament to capture the belt in the end links. The belt you use for this can be of any quality. diff --git a/printer_mods/Iakabos/V0_beltchain/Stock_Beltchain0_Adapter.stl b/printer_mods/Iakabos/V0_beltchain/Stock_Beltchain0_Adapter.stl new file mode 100644 index 000000000..2a484306f Binary files /dev/null and b/printer_mods/Iakabos/V0_beltchain/Stock_Beltchain0_Adapter.stl differ diff --git a/printer_mods/Iakabos/V0_beltchain/Stock_Beltchain0_Bottom.stl b/printer_mods/Iakabos/V0_beltchain/Stock_Beltchain0_Bottom.stl new file mode 100644 index 000000000..16ca52c99 Binary files /dev/null and b/printer_mods/Iakabos/V0_beltchain/Stock_Beltchain0_Bottom.stl differ diff --git a/printer_mods/Iakabos/V0_beltchain/Stock_Beltchain0_Link.stl b/printer_mods/Iakabos/V0_beltchain/Stock_Beltchain0_Link.stl new file mode 100644 index 000000000..bc432ec52 Binary files /dev/null and b/printer_mods/Iakabos/V0_beltchain/Stock_Beltchain0_Link.stl differ diff --git a/printer_mods/Iakabos/V0_beltchain/Stock_Beltchain0_Top.stl b/printer_mods/Iakabos/V0_beltchain/Stock_Beltchain0_Top.stl new file mode 100644 index 000000000..595732e75 Binary files /dev/null and b/printer_mods/Iakabos/V0_beltchain/Stock_Beltchain0_Top.stl differ diff --git a/printer_mods/README.md b/printer_mods/README.md index 87ae87f48..b58dae12c 100644 --- a/printer_mods/README.md +++ b/printer_mods/README.md @@ -52,6 +52,8 @@ like so: |hijax_pl_ |[Corner panel clip](./hijax_pl/corner_panel_clip) |V2 panel corner frames using 3-way L brackets in the corners |:x: |:x: |:heavy_check_mark: | | |[Din Rail mount](./hijax_pl/din_rail_mount) |Adapter to attach DIN Rail to 2020 extrusion. |:x: |:x: |:heavy_check_mark: | | |[Controler Board adapters](./hijax_pl/ender_compatible_controller_mount) |DIN (rotated) and legacy adapters for boards like SKR mini E3. |:grey_question: |:x: |:heavy_check_mark: | +|Iakabos| [c920_Mount](./Iakabos/C920_mount)|Slim mount for logitech c920 webcam|:x:|:heavy_check_mark:|:heavy_check_mark:| +| | [V0 beltchains](./Iakabos/V0_beltchain)|Modified beltchain parts for V0 Z cables|:heavy_check_mark: |:x: |:x: | |jasonc |[V2.4 Z-Idler Shoulder Bolt Mod](./jasonc/Z_Idler_Shoulder_Bolt) |Modification to the idler carriers to accept a 25mm shoulder bolt. Ideal for Gates idlers. |:x: |:x: |:heavy_check_mark: | | kirby | [V0 Sherpa Mini Direct Drive Mod](./kirby/v0_sherpa_mini_direct_drive)| A direct drive mod for the V0 using the Annex Sherpa Mini extruder | :heavy_check_mark: | :x: | :x: | |Kruppes |[V0 Printed Deck with inserts](./Kruppes/Deck_Panel_inserts_logo) |Electronics Deck Panel using brass heat inserts. Optional with accent color Voron Logo. |:heavy_check_mark: |:x: |:x: |