diff --git a/printer_mods/Badnoob/AB-BN/RapidoStickout.png b/printer_mods/Badnoob/AB-BN/RapidoStickout.png
new file mode 100644
index 000000000..8c80c02f6
Binary files /dev/null and b/printer_mods/Badnoob/AB-BN/RapidoStickout.png differ
diff --git a/printer_mods/Badnoob/AB-BN/Readme.md b/printer_mods/Badnoob/AB-BN/Readme.md
index eadfab0dd..182bf9e7c 100644
--- a/printer_mods/Badnoob/AB-BN/Readme.md
+++ b/printer_mods/Badnoob/AB-BN/Readme.md
@@ -63,10 +63,19 @@ This version of the afterburner fan and duct is a drop in replacement to the spe
 
 \* Cleaner airflow for better overhangs
 
+## This duct doesn't look right!
+
+With AB-BN-30, the nozzle should protrude approx. 1.7 mm from the lowest part of the duct.  When you look at the duct, people often think it looks like to air is pointed too high.
+The aim was done empirically over many iterations.  If the nozzle sticks out 1.7mm then it's where I intended it.
+![Stickout shown on Rapido](RapidoStickout.png)
+
 ### CHANGE Log
+
+Added support for Phaetus Rapido hotend
+
 Added support for E3D REVO hotend 
 
-Added support for Zodiac BMO and BMS
+Added support for Zodiac BMO and BMS hotend
 
 Removed support for Slice.
 
diff --git a/printer_mods/Badnoob/AB-BN/STL_files/AB-BN-30_hotend-Rapido-back.stl b/printer_mods/Badnoob/AB-BN/STL_files/AB-BN-30_hotend-Rapido-back.stl
new file mode 100644
index 000000000..af2cbe3b2
Binary files /dev/null and b/printer_mods/Badnoob/AB-BN/STL_files/AB-BN-30_hotend-Rapido-back.stl differ
diff --git a/printer_mods/Badnoob/AB-BN/STL_files/AB-BN-30_hotend-Rapido-front.stl b/printer_mods/Badnoob/AB-BN/STL_files/AB-BN-30_hotend-Rapido-front.stl
new file mode 100644
index 000000000..bddd709b3
Binary files /dev/null and b/printer_mods/Badnoob/AB-BN/STL_files/AB-BN-30_hotend-Rapido-front.stl differ