diff --git a/printer_mods/techprolet/2020_aplic_cam_mount/M3_CABLE_ANCHOR.STL b/printer_mods/techprolet/2020_aplic_cam_mount/M3_CABLE_ANCHOR.STL
new file mode 100644
index 000000000..633b8c580
Binary files /dev/null and b/printer_mods/techprolet/2020_aplic_cam_mount/M3_CABLE_ANCHOR.STL differ
diff --git a/printer_mods/techprolet/2020_aplic_cam_mount/README.md b/printer_mods/techprolet/2020_aplic_cam_mount/README.md
new file mode 100644
index 000000000..3156629ba
--- /dev/null
+++ b/printer_mods/techprolet/2020_aplic_cam_mount/README.md
@@ -0,0 +1,39 @@
+## 2020 Aplic Cam Mount
+
+
+
+2020 Aplic Cam Mount is a 3D printed part that is used to mount a cheapo aplic hd camera to the 2020 frame at bed level. The mount is designed to be held in place with a M3 screw and a M3 nut. Additionaly, you need 4x M3 heat inserts, 4x M3 spacers and 4x M3x6 screws for mounting the camera on the mount (pun intended).
+
+
+### Files
+* `aplic_cam_mount_voron_2_4_300x300.stl` - The mount STL, angled for the Voron 2.4 300x300mm geometry.
+* `aplic_cam_mount.scad` - The OpenSCAD file for the mount (you can play modify the parameters for your own printer's geometry).
+
+### Parts
+The mount is designed to be used with the following parts:
+```
+- 1x 3d printed 2020 Aplic Cam Mount
+- 1x Aplic Webcam - 1920x1080P stripped from its plastic case
+- 1x M3x10 screw
+- 2x M3 nut
+- 4x M3 heat insert
+- 4x M3 spacer
+- 4x M3x6 screws
+```
+### Printing
+The mount is printed in the orientation that it is in the STL file. The mount should be printed with the recommended Voron settings (40% infill and 4 perimeters) in ABS/ASA. That said, I've printed mine in PETG and it still holds. No supports or mount needed
+
+
+
+### Credits and license
+The mount was designed around the **2020 Cable Clamp** by ed_419522 https://www.printables.com/model/307909-2020-cable-clamp
+
+Copyright 2024, Pavlos Iliopoulos.
+
+ 2020 Aplic Cam Mount is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
+
+ 2020 Aplic Cam Mount is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along with this program. If not, see .
+
+The author does not hold any copyright or has any affiliation with aplic and/or its products.
diff --git a/printer_mods/techprolet/2020_aplic_cam_mount/aplic_cam_mount.scad b/printer_mods/techprolet/2020_aplic_cam_mount/aplic_cam_mount.scad
new file mode 100644
index 000000000..44606075d
--- /dev/null
+++ b/printer_mods/techprolet/2020_aplic_cam_mount/aplic_cam_mount.scad
@@ -0,0 +1,156 @@
+/*
+Copyright 2024, Pavlos Iliopoulos.
+
+ 2020 Aplic Cam Mount is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
+
+ 2020 Aplic Cam Mount is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along with this program. If not, see .
+
+The author does not hold any copyright or has any affiliation with aplic and/or its products.
+ */
+
+
+
+$fn = 64;
+
+// Wall thickness
+wall_thickness = 3;
+
+// Dimensions of the anchor
+anchor_l = 15;
+anchor_w = 12;
+anchor_h = 6;
+
+// Hole distances
+hole_distance_x = 54;
+hole_distance_y = 17;
+corrective_hole_x_offset = 0.8;
+
+// Dimensions of the wall
+wall_l = hole_distance_x + 3 * wall_thickness;
+wall_w = hole_distance_y + 3 * wall_thickness;
+
+// Camera elevation
+cam_elevation = 25;
+
+// Screw dimensions
+screw_length = 10;
+screw_receiver_d = 6;
+
+// Hex hole dimensions
+hex_hole_y = -7;
+hex_hole_d = 6;
+
+// Support dimensions
+support_w = anchor_l - 2 * wall_thickness;
+support_x_offset = (anchor_w - wall_thickness) / 2;
+
+// Heat insert dimensions
+heat_insert_d = 4.4;
+heat_insert_thickness = 13;
+
+// Calculate the camera viewing angle
+cam_viewing_angle_x = atan(74 / 148); // arctan( (distance between 2 rods/2) / (distance from back + stage side/2) )
+echo("CAM VIEWING ANGLE x:", cam_viewing_angle_x);
+
+// Define the solid anchor module
+module solid_anchor() {
+ anchor_l = 15;
+ anchor_w = 12;
+ anchor_h = 6;
+
+ tie_w = 4;
+ tie_offset_y = 9;
+ border_w = 0.5;
+
+ // Length is 15mm, width is 12mm
+ union() {
+ import("./M3_CABLE_ANCHOR.STL");
+ translate([border_w, tie_offset_y, 0]) {
+ cube([anchor_w - 2 * border_w, tie_w, anchor_h]);
+ }
+ }
+}
+
+// Define the back panel module
+module back_panel() {
+ hull() {
+ translate([0, wall_thickness / 2, anchor_h / 2]) {
+ cube([anchor_w, wall_thickness, anchor_h], center = true);
+ }
+ translate([0, wall_thickness / 2, wall_w / 2 + anchor_h + cam_elevation]) {
+ cube([wall_l, wall_thickness, wall_w], center = true);
+ }
+ }
+}
+
+// Define the inserts module
+module inserts() {
+ translate([0, 0, wall_w / 2 + anchor_h + cam_elevation]) {
+ translate([wall_thickness, -(wall_l * sin(cam_viewing_angle_x) / 2), 0]) {
+ rotate([0, 0, cam_viewing_angle_x]) {
+ for (x = [-1, 1]) {
+ for (y = [-1, 1]) {
+ translate([corrective_hole_x_offset + x * hole_distance_x / 2, heat_insert_thickness / 2, y * hole_distance_y / 2]) {
+ rotate([90, 0, 0]) {
+ cylinder(h = heat_insert_thickness, d = heat_insert_d);
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+}
+
+module rotated_wall() {
+ translate([wall_thickness, -(wall_l * sin(cam_viewing_angle_x) / 2), 0]) {
+ rotate([0, 0, cam_viewing_angle_x]) {
+ cube([wall_l, wall_thickness, wall_w], center = true);
+ }
+ }
+}
+
+module cam_mount() {
+ difference() {
+ translate([0, wall_thickness / 2, wall_w / 2 + anchor_h + cam_elevation]) {
+ hull() {
+ #cube([wall_l, wall_thickness, wall_w], center=true);
+ #rotated_wall();
+ }
+ }
+
+ #translate([0, hex_hole_y, 0]) {
+ cylinder(h = anchor_h + cam_elevation + wall_w, d = hex_hole_d);
+ }
+ }
+}
+
+module supports() {
+ for (i = [-1, 1]) {
+ translate([i * support_x_offset, -support_w / 2, (cam_elevation + anchor_h) / 2]) {
+ cube([wall_thickness, support_w, cam_elevation + anchor_h], center = true);
+ }
+ }
+}
+
+module aplic_complete_mount() {
+ translate([-anchor_w / 2, wall_thickness - anchor_l, 0]) {
+ solid_anchor();
+ }
+ difference() {
+ union() {
+ back_panel();
+ cam_mount();
+ }
+
+ #inserts ();
+ }
+
+ supports();
+}
+
+rotate([270, 0, 0]){
+ aplic_complete_mount();
+}
\ No newline at end of file
diff --git a/printer_mods/techprolet/2020_aplic_cam_mount/aplic_cam_mount_voron_2_4_300x300.stl b/printer_mods/techprolet/2020_aplic_cam_mount/aplic_cam_mount_voron_2_4_300x300.stl
new file mode 100644
index 000000000..eb9c8e6c9
Binary files /dev/null and b/printer_mods/techprolet/2020_aplic_cam_mount/aplic_cam_mount_voron_2_4_300x300.stl differ
diff --git a/printer_mods/techprolet/2020_aplic_cam_mount/img/2020_aplic_cam_mount.jpg b/printer_mods/techprolet/2020_aplic_cam_mount/img/2020_aplic_cam_mount.jpg
new file mode 100644
index 000000000..d262a2802
Binary files /dev/null and b/printer_mods/techprolet/2020_aplic_cam_mount/img/2020_aplic_cam_mount.jpg differ
diff --git a/printer_mods/techprolet/2020_aplic_cam_mount/metadata.yml b/printer_mods/techprolet/2020_aplic_cam_mount/metadata.yml
new file mode 100644
index 000000000..9827a25a8
--- /dev/null
+++ b/printer_mods/techprolet/2020_aplic_cam_mount/metadata.yml
@@ -0,0 +1,28 @@
+---
+# The title of your mod. Choose a short and descriptive name
+title: 2020 Aplic Cam Mount
+# A short description of your mod. Try to describe your mod with 1-2 short sentences
+description: Aplic HD camera to the 2020 frame at bed level.
+# Mod version: Set this to 1 when you are submitting a new mod. When you make changes to your mod, you may increment this number
+mod_version: 1
+# You may add your discord username here so people can contact you about your mod
+discord_username: techprolet
+# The CAD files for your mod. Please provide them as a list.
+# Note that each mod must include at least one CAD file.
+cad:
+- aplic_cam_mount.scad
+# The parts of your mod, exported and oriented ready to be sliced. Please provide them as a list.
+# Note that each mod must include at least one STL or OBJ file.
+stl:
+- aplic_cam_mount_voron_2_4_300x300.stl
+# The image files provided with your mod. These may be instructions you use in your README.md file, or other additional pictures.
+# **Note that the first image specified here will be used as cover image on mods.vorondesign.com**
+# All paths are relative to this .metadata.yml file.
+images:
+- img/2020_aplic_cam_mount.jpg
+# Printer compatibility. Please specify all compatible printers as a list. The following values are accepted:
+# "V0", "V0.1", "V0.2", "V0.2r1", "V1", "V1.6", "V1.8", "V1.8r1", "V2", "V2.1", "V2.2", "V2.4", "V2.4r1", "V2.4r2", "VSW", "VT", "VTr1", "VL"
+# Please only specify printers that you have either tested your mod on yourself, or that someone else has tested for you. If you are unsure whether your
+# mod is compatible with a certain printer, don't list it here!
+printer_compatibility:
+- V2.4r2
\ No newline at end of file