diff --git a/printer_mods/README.md b/printer_mods/README.md index a696f0e38..7d4823f60 100644 --- a/printer_mods/README.md +++ b/printer_mods/README.md @@ -153,8 +153,8 @@ like so: | | [Voron0 ExtendedLegs](./hartk1213/Voron0_ExtendedLegs) | New extended legs to raise the printer up a tiny bit more | :heavy_check_mark:| :x: | :x: |:x:|:x:| | | [Voron0 ExtrusionSkirt](./hartk1213/Voron0_ExtrusionSkirt) | Created a new skirt design that uses 50mm extrusions as legs and it has a c14 power inlet hole on the bottom | :heavy_check_mark:| :x: | :x: |:x:|:x:| | | [Voron0 MGN9C X Axis](./hartk1213/Voron0_MGN9C_X_Axis) | This mod, replaces the stock MGN7H for MGN9C on the V0 | :heavy_check_mark:| :x: | :x: |:x:|:x:| -| | [Voron2.4 Pins Mod](./hartk1213/Voron2.4_Pins_Mod) | This mod replaces all the M5 screws for all idlers/pulleys/bearings with 5mm pins | :x:| :x: | :heavy_check_mark: |:x:|:heavy_check_mark: | -| | [Voron2.4 Y Endstop Relocation](./hartk1213/Voron2.4_Y_Endstop_Relocation) | This mod relocates the Y endstop to the top A drive piece, to work with Arkeets MGN12 mod | :x:| :x: | :heavy_check_mark: |:x:|:heavy_check_mark: | +| | [Voron2.4 and Trident Pins Mod](./hartk1213/Voron2.4_Trident_Pins_Mod) | This mod replaces all the M5 screws for all idlers/pulleys/bearings with 5mm pins | :x:| :x: | :heavy_check_mark: |:x:|:heavy_check_mark: | +| | [Voron2.4 Y Endstop Relocation](./hartk1213/Voron2.4_Y_Endstop_Relocation) | This mod relocates the Y endstop to the top A drive piece | :x:| :x: | :heavy_check_mark: |:x:|:x: | | | [Voron2.4 GE5C](./hartk1213/Voron2.4_GE5C) | This mod replaces the stack of printed z joints with a metal spherical bearing | :x:| :x: | :heavy_check_mark: |:x:|:x:| | | [Voron2.4 SexBolt ZEndstop](./hartk1213/Voron2.4_SexBolt_ZEndstop) | This mod replaces stock V2 Z endstop with a different style| :x:| :x: | :heavy_check_mark: |:x:|:heavy_check_mark: | | henrikssn | [Plug Panel Mod for Generic Unfiltered Modules](./henrikssn/plug_panel_generic) | v2.4 plug panel for generic unfiltered modules with 66mm x 27mm cutout such as the Delta 06A2 and Qualtek 761-18 | :x: | :x: | :heavy_check_mark: | :x:| diff --git a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/AB Drives/a_drive_frame_lower_g5ec_offset.stl b/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/AB Drives/a_drive_frame_lower_g5ec_offset.stl deleted file mode 100644 index 8e072c2d1..000000000 Binary files a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/AB Drives/a_drive_frame_lower_g5ec_offset.stl and /dev/null differ diff --git a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/AB Drives/a_drive_frame_lower_g5ec_offset_pinned.stl b/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/AB Drives/a_drive_frame_lower_g5ec_offset_pinned.stl deleted file mode 100644 index 10e0875f9..000000000 Binary files a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/AB Drives/a_drive_frame_lower_g5ec_offset_pinned.stl and /dev/null differ diff --git a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/AB Drives/b_drive_frame_lower_g5ec_offset.stl b/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/AB Drives/b_drive_frame_lower_g5ec_offset.stl deleted file mode 100644 index 284855f8c..000000000 Binary files a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/AB Drives/b_drive_frame_lower_g5ec_offset.stl and /dev/null differ diff --git a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/AB Drives/b_drive_frame_lower_g5ec_offset_pinned.stl b/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/AB Drives/b_drive_frame_lower_g5ec_offset_pinned.stl deleted file mode 100644 index 22f94b08b..000000000 Binary files a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/AB Drives/b_drive_frame_lower_g5ec_offset_pinned.stl and /dev/null differ diff --git a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/Front Idlers/a_idler_lower_g5ec_offset.stl b/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/Front Idlers/a_idler_lower_g5ec_offset.stl deleted file mode 100644 index 4c599fadc..000000000 Binary files a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/Front Idlers/a_idler_lower_g5ec_offset.stl and /dev/null differ diff --git a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/Front Idlers/a_idler_lower_g5ec_offset_pinned.stl b/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/Front Idlers/a_idler_lower_g5ec_offset_pinned.stl deleted file mode 100644 index 6bd8b2a4a..000000000 Binary files a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/Front Idlers/a_idler_lower_g5ec_offset_pinned.stl and /dev/null differ diff --git a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/Front Idlers/b_idler_lower_g5ec_offset.stl b/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/Front Idlers/b_idler_lower_g5ec_offset.stl deleted file mode 100644 index 37d3c4385..000000000 Binary files a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/Front Idlers/b_idler_lower_g5ec_offset.stl and /dev/null differ diff --git a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/Front Idlers/b_idler_lower_g5ec_offset_pinned.stl b/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/Front Idlers/b_idler_lower_g5ec_offset_pinned.stl deleted file mode 100644 index 3fa019320..000000000 Binary files a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Gantry/Front Idlers/b_idler_lower_g5ec_offset_pinned.stl and /dev/null differ diff --git a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/z_joint_ge5c_hall_effect_x1.stl b/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/z_joint_ge5c_hall_effect_x1.stl deleted file mode 100644 index 6eca00373..000000000 Binary files a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/z_joint_ge5c_hall_effect_x1.stl and /dev/null differ diff --git a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/z_joint_ge5c_igus_eglm-05_hall_effect_x1.stl b/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/z_joint_ge5c_igus_eglm-05_hall_effect_x1.stl new file mode 100644 index 000000000..ad8157a80 Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/z_joint_ge5c_igus_eglm-05_hall_effect_x1.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/z_joint_ge5c_x4.stl b/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/z_joint_ge5c_igus_eglm-05_slim_x4.stl similarity index 99% rename from printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/z_joint_ge5c_x4.stl rename to printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/z_joint_ge5c_igus_eglm-05_slim_x4.stl index ab4632911..22ddc8bee 100644 Binary files a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/z_joint_ge5c_x4.stl and b/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/z_joint_ge5c_igus_eglm-05_slim_x4.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/z_joint_ge5c_igus_eglm-05_x4.stl b/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/z_joint_ge5c_igus_eglm-05_x4.stl new file mode 100644 index 000000000..979ba4173 Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/z_joint_ge5c_igus_eglm-05_x4.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/z_joint_ge5c_y_endstop_x1.stl b/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/z_joint_ge5c_y_endstop_x1.stl deleted file mode 100644 index 1df720613..000000000 Binary files a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/z_joint_ge5c_y_endstop_x1.stl and /dev/null differ diff --git a/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/Phalanx/z_joint_igus_kglm-05_x4.stl b/printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/z_joint_igus_kglm-05_x4.stl similarity index 100% rename from printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/Phalanx/z_joint_igus_kglm-05_x4.stl rename to printer_mods/hartk1213/Voron2.4_GE5C/STLs/Z_Joints/z_joint_igus_kglm-05_x4.stl diff --git a/printer_mods/hartk1213/Voron2.4_GE5C/readme.md b/printer_mods/hartk1213/Voron2.4_GE5C/readme.md index 2be889569..6cb6a0541 100644 --- a/printer_mods/hartk1213/Voron2.4_GE5C/readme.md +++ b/printer_mods/hartk1213/Voron2.4_GE5C/readme.md @@ -14,10 +14,6 @@ Screws |M5x1mm spacer|4| |If using Halleffect 6x3 magnet | 1 | -#### Notes about IGUS bearings - -You can replace the GE5C bearings with IGUS models. There are two IGUS spherical bearings types: the `KGLM` and `EGLM` series. The EGLM are compatible with the files found in the `Z_Joints` folder, the KGLM require the files located in `Z_Joints/Phalanx`. - ![1](Images/1.png) @@ -28,7 +24,7 @@ First just insert GE5C bearing , it should just pop in ![1](Images/3.png) -Now if you are using the "No Endstops" version you need 4 m3x16 screws per z joint, if you are using the endstop/halleffect version then you need 4 m3x20 per z joint. +Now if you are using the "slim" version you need 4 m3x16 screws per z joint, if you are using the standard or hall effect version then you need 4 m3x20 per z joint. ![1](Images/4.png) @@ -44,15 +40,3 @@ Use an M5x20 BHCS and 1 m5x1mm washer and screw it into the gantry using a roll This is how it should be assembled when all done - -### NOTE: To address the question on whether to use the offset or non-offset pieces - -* if you are building a new printer using the ge5c mod, then i recommend the offset parts - -* if you are just installing these in a currently built printer then the stock non-offset parts are fine - - - - - - diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/Images/1.png b/printer_mods/hartk1213/Voron2.4_Pins_Mod/Images/1.png deleted file mode 100644 index fe954d940..000000000 Binary files a/printer_mods/hartk1213/Voron2.4_Pins_Mod/Images/1.png and /dev/null differ diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/CAD/Gantry/AB_Drive_Units/a_drive_frame_lower_pinned.step b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/CAD/Gantry/AB_Drive_Units/a_drive_frame_lower_pinned.step similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/CAD/Gantry/AB_Drive_Units/a_drive_frame_lower_pinned.step rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/CAD/Gantry/AB_Drive_Units/a_drive_frame_lower_pinned.step diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/CAD/Gantry/AB_Drive_Units/a_drive_frame_upper_pinned.step b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/CAD/Gantry/AB_Drive_Units/a_drive_frame_upper_pinned.step similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/CAD/Gantry/AB_Drive_Units/a_drive_frame_upper_pinned.step rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/CAD/Gantry/AB_Drive_Units/a_drive_frame_upper_pinned.step diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/CAD/Gantry/AB_Drive_Units/b_drive_frame_lower_pinned.step b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/CAD/Gantry/AB_Drive_Units/b_drive_frame_lower_pinned.step similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/CAD/Gantry/AB_Drive_Units/b_drive_frame_lower_pinned.step rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/CAD/Gantry/AB_Drive_Units/b_drive_frame_lower_pinned.step diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/CAD/Gantry/AB_Drive_Units/b_drive_frame_upper_pinned.step b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/CAD/Gantry/AB_Drive_Units/b_drive_frame_upper_pinned.step similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/CAD/Gantry/AB_Drive_Units/b_drive_frame_upper_pinned.step rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/CAD/Gantry/AB_Drive_Units/b_drive_frame_upper_pinned.step diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/CAD/Gantry/Front_Idlers/[a]_tensioner_left_pinned.step b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/CAD/Gantry/Front_Idlers/[a]_tensioner_left_pinned.step similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/CAD/Gantry/Front_Idlers/[a]_tensioner_left_pinned.step rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/CAD/Gantry/Front_Idlers/[a]_tensioner_left_pinned.step diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/CAD/Gantry/Front_Idlers/[a]_tensioner_right_pinned.step b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/CAD/Gantry/Front_Idlers/[a]_tensioner_right_pinned.step similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/CAD/Gantry/Front_Idlers/[a]_tensioner_right_pinned.step rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/CAD/Gantry/Front_Idlers/[a]_tensioner_right_pinned.step diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/CAD/Gantry/X_Axis/XY_Joints/xy_joint_left_pinned.step b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/CAD/Gantry/X_Axis/XY_Joints/xy_joint_left_pinned.step similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/CAD/Gantry/X_Axis/XY_Joints/xy_joint_left_pinned.step rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/CAD/Gantry/X_Axis/XY_Joints/xy_joint_left_pinned.step diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/CAD/Gantry/X_Axis/XY_Joints/xy_joint_right_pinned.step b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/CAD/Gantry/X_Axis/XY_Joints/xy_joint_right_pinned.step similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/CAD/Gantry/X_Axis/XY_Joints/xy_joint_right_pinned.step rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/CAD/Gantry/X_Axis/XY_Joints/xy_joint_right_pinned.step diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/CAD/Z_Idlers/z_Idler_pinned.step b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/CAD/Z_Idlers/z_Idler_pinned.step similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/CAD/Z_Idlers/z_Idler_pinned.step rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/CAD/Z_Idlers/z_Idler_pinned.step diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/Images/1.jpg b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/Images/1.jpg new file mode 100644 index 000000000..5b3a02214 Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/Images/1.jpg differ diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/Images/2.jpg b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/Images/2.jpg new file mode 100644 index 000000000..e71e90680 Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/Images/2.jpg differ diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/Images/z.jpg b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/Images/z.jpg new file mode 100644 index 000000000..2a9f9e7f0 Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/Images/z.jpg differ diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/README.md b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/README.md similarity index 55% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/README.md rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/README.md index cf43ac60a..c27dc4405 100644 --- a/printer_mods/hartk1213/Voron2.4_Pins_Mod/README.md +++ b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/README.md @@ -1,7 +1,8 @@ +## This has been updated for V2.4r2 and Trident -This mod is for the V2, it involves printing new AB drive frames, new XY Joints, new Front Tensioners, and new Z idlers +This mod is for the V2/Trident, it involves printing new AB drive frames, new XY Joints, new Front Tensioners, and new Z idlers The pins have replaced m5 screws, at any location where the screw acts like a shaft, holding bearings, pulleys or idlers. This allows for smoother rotation and stops the possibility of motion parts being caught in threads. This work was done by everyone, thanks to ABS plastic and voron printers for the fast iteration, @doomweasel? they fall out yet? @@ -18,53 +19,40 @@ To complete this mod the following files will need to be reprinted - [a]_b_tensioner_pinned.stl **XY Joints** - -*NOTE: There are now 2 versions of these files , 1 set for Stock 2.4 and 1 set for [Arkeets MGN12](../../arkeet/mgn12)* -- xy_joint_left_upper_pinned.stl -- xy_joint_left_lower_pinned.stl -- xy_joint_right_upper_pinned.stl -- xy_joint_right_lower_pinned.stl -- -or - - MGN12_xy_joint_left_upper_pinned.stl - MGN12_xy_joint_left_lower_pinned.stl - MGN12_xy_joint_right_upper_pinned.stl - MGN12_xy_joint_right_lower_pinned.stl -**Z Idlers** +**Z Idlers FOR V2** either one of these based on if you are using 6mm or 9mm belt - [a]_z_tensioner_x4_6mm_pinned.stl - [a]_z_tensioner_x4_9mm_pinned.stl - - here is what the XY Joint will look like -![XY Joint](Images/1.png) - - -There is a new file for the A Drive to go along with [Arkeets MGN12](../../arkeet/mgn12) mod that has the X endstop on the toolhead - -the files for the endstop relocation mod are here [Voron2.4_Y_Endstop_Relocation](../Voron2.4_Y_Endstop_Relocation) +![XY Joint](Images/1.jpg) +![XY Joint](Images/2.jpg) +here is what the Z idler will look like +![XY Joint](Images/z.jpg) the following 5mm Pin hardware is what is needed as well **BOM** ``` [A-B] -threaded @ 30mm (x2) -smooth @ 28mm (x2) +30mm (x2) +28mm (x2) [X-Y Joints] -smooth @ 40mm (x4) +40mm (x4) [X-Y Idlers] -smooth @ 43mm (x2) +43mm (x2) [Z Idlers] -smooth @ 28mm (x4) +28mm (x4) ``` these can be purchased from here @@ -73,24 +61,15 @@ Smooth pins [https://www.aliexpress.com/item/1739093502.html](https://www.aliexpress.com/item/1739093502.html "https://www.aliexpress.com/item/1739093502.html") -threaded pins - -https://www.ebay.com/itm/%CF%865mm-%CF%8612mm-Female-Thread-Cylindrical-Pin-Dowel-Pins-A2-304-Stainless-Steel/184373551069 - Misumi Part Numbers |Part NO. |Qty | |--|--| -| SFRT5-30-M3 | 2 | +| SFR5-30 | 2 | | SFR5-43 | 2 | | SFR5-40 | 4 | | SFR5-28 | 6 | - -**NOTE:** -2 smooth pins can be substituted for the threaded pins, the reason the threaded pins are there is for easy removal without the need to remove the stepper. but if you dont plan on removing the pins without removing the stepper than smooth pins would work just fine for you in this situation. - - The following users are the main contributors to this mod @RoboDave diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/Trident/a_drive_frame_lower_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/Trident/a_drive_frame_lower_pinned.stl new file mode 100644 index 000000000..d0408c1b3 Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/Trident/a_drive_frame_lower_pinned.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/Trident/a_drive_frame_upper_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/Trident/a_drive_frame_upper_pinned.stl new file mode 100644 index 000000000..6c5e4cc69 Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/Trident/a_drive_frame_upper_pinned.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/Trident/a_drive_frame_upper_with_jst_y_endstop_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/Trident/a_drive_frame_upper_with_jst_y_endstop_pinned.stl new file mode 100644 index 000000000..248d399a3 Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/Trident/a_drive_frame_upper_with_jst_y_endstop_pinned.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/Trident/b_drive_frame_lower_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/Trident/b_drive_frame_lower_pinned.stl new file mode 100644 index 000000000..fd732157c Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/Trident/b_drive_frame_lower_pinned.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/Trident/b_drive_frame_upper_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/Trident/b_drive_frame_upper_pinned.stl new file mode 100644 index 000000000..0e8325d42 Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/Trident/b_drive_frame_upper_pinned.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/AB_Drive_Units/a_drive_frame_lower_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/a_drive_frame_lower_pinned.stl similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/AB_Drive_Units/a_drive_frame_lower_pinned.stl rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/a_drive_frame_lower_pinned.stl diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/AB_Drive_Units/a_drive_frame_upper_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/a_drive_frame_upper_pinned.stl similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/AB_Drive_Units/a_drive_frame_upper_pinned.stl rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/a_drive_frame_upper_pinned.stl diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/a_drive_frame_upper_with_jst_y_endstop_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/a_drive_frame_upper_with_jst_y_endstop_pinned.stl new file mode 100644 index 000000000..1d21ef37a Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/a_drive_frame_upper_with_jst_y_endstop_pinned.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/AB_Drive_Units/b_drive_frame_lower_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/b_drive_frame_lower_pinned.stl similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/AB_Drive_Units/b_drive_frame_lower_pinned.stl rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/b_drive_frame_lower_pinned.stl diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/AB_Drive_Units/b_drive_frame_upper_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/b_drive_frame_upper_pinned.stl similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/AB_Drive_Units/b_drive_frame_upper_pinned.stl rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/Old(24r1)/b_drive_frame_upper_pinned.stl diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/a_drive_frame_lower_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/a_drive_frame_lower_pinned.stl new file mode 100644 index 000000000..ca2f55131 Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/a_drive_frame_lower_pinned.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/a_drive_frame_upper_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/a_drive_frame_upper_pinned.stl new file mode 100644 index 000000000..259132f47 Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/a_drive_frame_upper_pinned.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/b_drive_frame_lower_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/b_drive_frame_lower_pinned.stl new file mode 100644 index 000000000..ee5b5c57e Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/b_drive_frame_lower_pinned.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/b_drive_frame_upper_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/b_drive_frame_upper_pinned.stl new file mode 100644 index 000000000..dd7861b2f Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/AB_Drive_Units/V2/b_drive_frame_upper_pinned.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/Front_Idlers/[a]_a_tensioner_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/Front_Idlers/Old(24r1)/[a]_a_tensioner_pinned.stl similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/Front_Idlers/[a]_a_tensioner_pinned.stl rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/Front_Idlers/Old(24r1)/[a]_a_tensioner_pinned.stl diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/Front_Idlers/[a]_b_tensioner_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/Front_Idlers/Old(24r1)/[a]_b_tensioner_pinned.stl similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/Front_Idlers/[a]_b_tensioner_pinned.stl rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/Front_Idlers/Old(24r1)/[a]_b_tensioner_pinned.stl diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/Front_Idlers/[a]_a_tensioner_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/Front_Idlers/[a]_a_tensioner_pinned.stl new file mode 100644 index 000000000..2266a6e60 Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/Front_Idlers/[a]_a_tensioner_pinned.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/Front_Idlers/[a]_b_tensioner_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/Front_Idlers/[a]_b_tensioner_pinned.stl new file mode 100644 index 000000000..79c631704 Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/Front_Idlers/[a]_b_tensioner_pinned.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_left_lower_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_left_lower_pinned.stl new file mode 100644 index 000000000..f0f6f70f1 Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_left_lower_pinned.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_left_upper_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_left_upper_pinned.stl new file mode 100644 index 000000000..9e0ba1b82 Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_left_upper_pinned.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_right_lower_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_right_lower_pinned.stl new file mode 100644 index 000000000..45d2ff683 Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_right_lower_pinned.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_right_upper_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_right_upper_pinned.stl new file mode 100644 index 000000000..c09efc05b Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_right_upper_pinned.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_left_lower_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_left_lower_pinned.stl similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_left_lower_pinned.stl rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_left_lower_pinned.stl diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_left_upper_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_left_upper_pinned.stl similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_left_upper_pinned.stl rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_left_upper_pinned.stl diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_right_lower_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_right_lower_pinned.stl similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_right_lower_pinned.stl rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_right_lower_pinned.stl diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_right_lower_pinned_no_wire_path.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_right_lower_pinned_no_wire_path.stl new file mode 100644 index 000000000..d185d2229 Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_right_lower_pinned_no_wire_path.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_right_upper_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_right_upper_pinned.stl similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/MGN12_xy_joint_right_upper_pinned.stl rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_right_upper_pinned.stl diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_right_upper_pinned_no_wire_path.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_right_upper_pinned_no_wire_path.stl new file mode 100644 index 000000000..09cccecd4 Binary files /dev/null and b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/MGN12_xy_joint_right_upper_pinned_no_wire_path.stl differ diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/xy_joint_left_lower_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/xy_joint_left_lower_pinned.stl similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/xy_joint_left_lower_pinned.stl rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/xy_joint_left_lower_pinned.stl diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/xy_joint_left_upper_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/xy_joint_left_upper_pinned.stl similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/xy_joint_left_upper_pinned.stl rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/xy_joint_left_upper_pinned.stl diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/xy_joint_right_lower_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/xy_joint_right_lower_pinned.stl similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/xy_joint_right_lower_pinned.stl rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/xy_joint_right_lower_pinned.stl diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/xy_joint_right_upper_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/xy_joint_right_upper_pinned.stl similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/xy_joint_right_upper_pinned.stl rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Gantry/X_Axis/XY_Joints/Old(24r1)/xy_joint_right_upper_pinned.stl diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Z_Idlers/[a]_z_tensioner_x4_6mm_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Z_Idlers/[a]_z_tensioner_x4_6mm_pinned.stl similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Z_Idlers/[a]_z_tensioner_x4_6mm_pinned.stl rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Z_Idlers/[a]_z_tensioner_x4_6mm_pinned.stl diff --git a/printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Z_Idlers/[a]_z_tensioner_x4_9mm_pinned.stl b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Z_Idlers/[a]_z_tensioner_x4_9mm_pinned.stl similarity index 100% rename from printer_mods/hartk1213/Voron2.4_Pins_Mod/STLs/Z_Idlers/[a]_z_tensioner_x4_9mm_pinned.stl rename to printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/STLs/Z_Idlers/[a]_z_tensioner_x4_9mm_pinned.stl diff --git a/printer_mods/hartk1213/Voron2.4_Y_Endstop_Relocation/README.md b/printer_mods/hartk1213/Voron2.4_Y_Endstop_Relocation/README.md index 419e74d20..627f16fcd 100644 --- a/printer_mods/hartk1213/Voron2.4_Y_Endstop_Relocation/README.md +++ b/printer_mods/hartk1213/Voron2.4_Y_Endstop_Relocation/README.md @@ -9,7 +9,7 @@ There are 2 different files non pinned version - a_drive_frame_upper_with_jst_y_endstop.stl -pinned version (since this mod also works with the [Voron2.4_Pins_Mod](../Voron2.4_Pins_Mod)): +pinned version (since this mod also works with the [Voron2.4_Trident_Pins_Mod](../Voron2.4_Trident_Pins_Mod)) - a_drive_frame_upper_with_jst_y_endstop_pinned.stl here are a few pics for reference