Add Rainbow Serial Bumper for Trident

printer_mods/MapleLeafMakers/Rainbow_Serial_Bumper/README.md

@@ -0,0 +1,106 @@
+# Rainbow Serial Bumper
+
+Just a little bit of extra bling for your [Voron Trident](https://github.com/VoronDesign/Voron-Trident)
+
+![Bling](./Images/tridentbling.gif)
+
+
+
+## Bill of Materials
+
+| Component                       | Qty   | Note                                                   |
+|---------------------------------|-------|--------------------------------------------------------| 
+| M3x8 SHCS                       |  2    | for mounting                                           |
+| 2020 M3 T-Nut                   |  2    | for mounting                                           |
+| 10mm High Density RGB COB Strip |  50mm | https://www.aliexpress.com/item/1005005486743999.html  |
+
+
+## Printing
+
+### [a]_main_body.stl
+
+Print in your accent color of choice. Darker colors do a better job of preventing the light from bleeding through, using a high infill percentage can also help.
+
+This part is already oriented correctly for printing and requires no slicer supports.
+
+![Main Body Slicer](Images/[a]_main_body_slicer.png)
+
+
+After printing remove the support piece.
+
+![Main Body Support Removal](Images/[a]_main_body.gif)
+
+### [o]_insert_collar.stl
+
+Print in black or another dark color.
+
+This part is already oriented correctly for printing and requires no slicer supports.
+
+![Insert Collar Slicer](Images/[o]_insert_collar_slicer.png)
+
+After printing remove the support pieces.
+
+![Insert Collar Support Removal](Images/[o]_insert_collar.gif)
+
+
+### [o]_back_plate.stl
+
+Print in black or another dark color.
+
+This part is already oriented correctly for printing and requires no slicer supports.
+
+![Back Plate Slicer](Images/[o]_back_plate_slicer.png)
+</details>
+
+
+### [oc]_insert.stl
+
+#### Step 1 - Adding the text
+
+Engrave the text **1mm** into the surface of the part.  Orca Slicer is shown below, but the process should be similar in other slicers.
+
+The recommended font is [Play Bold](https://fonts.google.com/specimen/Play) (aka "The Voron Font") 
+
+![Insert Step 1-1](Images/[oc]_insert_slicer_1.png)
+
+![Insert Step 1-2](Images/[oc]_insert_slicer_2.png)
+
+![Insert Step 1-3](Images/[oc]_insert_slicer_3.png)
+
+#### Step 2 - Preparing to print
+
+This is where the magic happens.  You'll need a black/dark filament, and a clear filament that will stick to eachother.  I used black and clear polymaker PETG.
+
+**Flip the part over 180 degrees.**
+
+![Insert Step 2-1](Images/[oc]_insert_slicer_4.png)
+
+**Slicer Settings**
+
+For best results:
+ - 1 perimeter
+ - 0 top & bottom laters
+ - 100% Aligned Rectilinear infill
+
+Slice the part, and insert a pause *after* 1mm, this is where you will switch from dark to clear filament.
+
+![Insert Step 2-2](Images/[oc]_insert_slicer_5.png)
+
+
+
+## Assembly
+
+**Press the Insert into the Main Body, and then press the collar in the gap.**
+
+![Assembly Step 1](Images/assembly_1.gif)
+
+**Solder the LED wiring, and insert the LED strip, followed by the back plate.**
+
+![Assembly Step 2](Images/assembly_2.gif)
+
+## Installation
+
+Install on the front bed extrusion of your Voron Trident, or anywhere else you think it would look cool.
+
+![Installation](Images/install.gif)
+