Merge pull request #26 from JaredC01/JaredMods

Adding JaredC01's 12864 Mini Knob

printer_mods/JaredC01/Mini_12864_Voron_Knob/readme.md

@@ -0,0 +1,17 @@
+# Mini 12864 LCD Voron Knob
+
+### Images
+![Image](./knobdark.jpg)
+![Image](./knoblight.jpg)
+
+This is a replacement knob designed for the Mini 12864 Display with RGB LEDs (Fystec).  The knob is designed to be printed in PLA and does not account for any shrinkage when printing with ABS, and may damage the knob if printed in ABS! **YOU HAVE BEEN WARNED!**
+
+The first 3.0mm of the knob is the Voron logo portion, and can be printed in a different color to make it stand out (as shown above).  Best bet is to use the same permiter and infill settings as functional parts for best light diffusion if using clear PLA.
+
+### Instructions
+## Clear Dual Color PLA
+1. In your slicer of choice, set a filament change after the first 3.0mm.
+2. After the first 3.0mm (starting at 3.2mm when using 0.2mm LH), switch from color PLA to clear PLA and continue printing.  For best results, purge any remaining color filament when switching to clear.
+
+## Single-color PLA
+1. Load up the STL and print like any other part.

printer_mods/README.md

@@ -55,6 +55,7 @@ If your mod is lacking a column in the compatibility matrix, feel free to submit
 | | [Mini12864 Display Mount](./Iakabos/Mini12864_display_mount)|Case and mounting arms for a Fysetc Mini12864 display |:grey_question: |:heavy_check_mark: |:heavy_check_mark: |
 | Hackdoggo| [BMGobius](./hackdoggo/v2/bmgobius)|Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears |:heavy_check_mark:  | :heavy_check_mark: | :heavy_check_mark: |
 |hiemmer | [Tool Holders](./hiemmer/Tool_Holders)| Tool holder for calipers, screwdriver etc| :grey_question:| :grey_question:|:grey_question: |
+|JaredC01 | [Mini 12864 Voron Knob](./JaredC01/Mini_12864_Voron_Knob) | Upgraded knob for Fystec Mini 12864 RGB LED Display | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |
 | Jasperkm | [5mm panel mounting](./Jasperkm/5mm_panel_mounting)| Edited panel clips for 4mm panel + 1mm foam tape| :x: | :heavy_check_mark: | :heavy_check_mark: |
 | | [Brush holder](./Jasperkm/Brush_holder)| Brush holder next to printbed | :x: | :heavy_check_mark: | :heavy_check_mark: |
 | | [Cable management](./Jasperkm/Cable_management)| Cable trunking and 2020 slot cover | :x: | :heavy_check_mark: | :heavy_check_mark: |
@@ -116,6 +117,6 @@ If your mod is lacking a column in the compatibility matrix, feel free to submit
 | wile.e.coyote| [Coroplast Support](./wile.e.coyote)|Support for the coroplast to prevent sagging | :x: |:heavy_check_mark: |:grey_question: |
 | |[Dual Buck Bracket](./wile.e.coyote)   |Mounting bracket for 2 buck converters | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |
 | |[Nozzle Scrubber Mount](./wile.e.coyote) | Mount for brass brush. Used for cleaning nozzle before printing |:x: | :heavy_check_mark: |:heavy_check_mark: |
-| | [Wago Mounts](./wile.e.coyote)  | Different mounts for Wago connectors | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: | 
+| | [Wago Mounts](./wile.e.coyote)  | Different mounts for Wago connectors | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |
 
 ---