LGX Lite toolhead PCB mount (#572)

* Initial commit of LGX Lite toolhead PCB mount

* Added discord username

* Update README.md

* Change to threaded insert holes

Holes for threaded inserts step down to 3.4mm with a chamfer for printability

* Added spacer

Mount will interfere with the gears without washers or a spacer

* Changes due to adding spacer

* Update LGX_Lite_toolhead_PCB_mount.stl

Change to go with spacer

* Spacer and mount improvements

Should work better with the screw lengths

* Updated images and readme

* Added CAD folder and file

* Removed V0 check mark for LGX Lite toolhead PCB mount

* Update README.md

State how it was tested (version 3.2 of the toolhead PCB)

printer_mods/Fiction/LGX_Lite_toolhead_PCB_mount/README.md

@@ -0,0 +1,23 @@
+# LGX Lite toolhead PCB mount
+Use with Mrgl-Mrgl's LGX Lite and cable chain mounts https://github.com/Mrgl-Mrgl/VoronUsers/tree/master/printer_mods/Mrgl-Mrgl/LGX_Lite_Mount
+
+Tested with version 3.2 of the toolhead PCB https://github.com/VoronDesign/Voron-Hardware/tree/master/Afterburner_Toolhead_PCB
+
+## Fasteners
+- 2 x M3x5x4 threaded inserts (the standard Voron M3 threaded inserts)
+- 2 x M3x8 countersunk socket head screws to attach the toolhead PCB mount to the LGX Lite body side (with square nuts installed)
+- 2 x M3x8 socket head cap screws to attach the toolhead PCB to the mount (use plastic washers)
+- 2 x M3 plastic washers
+
+## Notes
+- install the threaded inserts from the flat side of the mount. This will leave some plastic between the threaded insert and the PCB to prevent damage to traces etc
+- use the spacer or washers between the mount and the LGX Lite body to avoid interference with the gears
+
+## Images
+![](./Images/LGX_Lite_toolhead_PCB_mount_photo_01.jpg)
+![](./Images/LGX_Lite_toolhead_PCB_mount_07.png)
+![](./Images/LGX_Lite_toolhead_PCB_mount_01.png)
+![](./Images/LGX_Lite_toolhead_PCB_mount_05.png)
+![](./Images/LGX_Lite_toolhead_PCB_mount_06.png)
+
+Fiction#5826 on Discord

printer_mods/README.md

@@ -129,6 +129,7 @@ like so:
 | | [Crossrail](./Fiction/Crossrail) | Across-the-rails LRS-200-24 or RSP-200-24 mount using DRP-03 brackets | :x: | :x: | :heavy_check_mark: | :x: | :heavy_check_mark: |
 | | [Exhaust_cover](./Fiction/Exhaust_cover) | Cover for exhaust cutout in back panel | :x: | :x: | :heavy_check_mark: | :x: | :heavy_check_mark: |
 | | [Exhaust_cover_SFS](./Fiction/Exhaust_cover_SFS) | Exhaust cover and BTT Smart Filament Sensor mount | :x: | :x: | :heavy_check_mark: | :x: | :heavy_check_mark: |
+| | [LGX Lite toolhead PCB mount](./Fiction/LGX_Lite_toolhead_PCB_mount) | Mount for Hartk's toolhead PCB(s) for LGX Lite | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |
 | FreeformFez | [V1.8 Filtered Power Inlet](./FreeformFez/FilteredPower) | V1.6 Filtered Inlet and Rocker Switch for V1.8 | :x: | :heavy_check_mark: | :x: |:x:|
 | GadgetAngel | [Cricut Voron Logos](./GadgetAngel/Cricut_Voron_Logos) |For any cutting machines or machines that rely on vector graphics and use .svg files. These vectors or .svg files are the Voron Design Logos for the Voron 2.4, Voron SwitchWire and Voron 0.0/0.1. These .svg files use a minimal amount of anchor points to achieve the vector shapes! | :heavy_check_mark: | :x: | :heavy_check_mark: | :heavy_check_mark: | :x: |
 |  | [Bed Support Extrusions Alignment Tools](./GadgetAngel/Bed_Support_Alignment_Tools) |The bed support alignment tools will assist in helping align the "bed support extrusions" to the frame. When the alignment tools are placed in all four corners of the Voron Printer's frame the "bed support extrusions" will butt up against these tools so that you can screw the "bed support extrusions" down to the printer's frame in the correct position.|  :x: | :x: | :heavy_check_mark: |  :x: | :x: |