diff --git a/README.md b/README.md index 4acf0a1d9..bf0a32052 100644 --- a/README.md +++ b/README.md @@ -21,321 +21,321 @@ The list should be structured in the following way: ## 3D_Black -[Fan Covers](https://github.com/VoronDesign/Voron-2/tree/master/mods/3D_Black) +[Fan Covers](../mods/3D_Black) - Different fan covers for 40mm fans. ## Andreq -[Mobius Shaft Jig](https://github.com/VoronDesign/Voron-2/tree/master/mods/andreq/voron2) +[Mobius Shaft Jig](../mods/andreq/voron2) - Tool used for grinding flats on a shaft at specific places. ## Armstr0ng -[Led extrusions mount]((https://github.com/VoronDesign/Voron-2/tree/master/mods/Armstr0ng)) +[Led extrusions mount](../mods/Armstr0ng) - A mount for aluminium LED extrusions with hidden fasteners ## ArmyAg08 -[Logitech C270 Mounts](https://github.com/VoronDesign/Voron-2/tree/master/mods/ArmyAg08/Logitech_C270_Mounts) +[Logitech C270 Mounts](../mods/ArmyAg08/Logitech_C270_Mounts) - Different C270 camera mounts, attached to the extrusions. -[Corner Panel Clip](https://github.com/VoronDesign/Voron-2/tree/master/mods/ArmyAg08/Panels) +[Corner Panel Clip](../mods/ArmyAg08/Panels) - Corner panel clip that fit 3mm or 1/8" panels with foam tape. ## Chron -[SKR 1.3 TMC2208 UART Config](https://github.com/VoronDesign/Voron-2/tree/master/mods/Chron) +[SKR 1.3 TMC2208 UART Config](../mods/Chron) - Configuration for SKR 1.3 TMC2208 UART ## Danowar -[F6 Board Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Danowar/F6_Board_Mount) +[F6 Board Mount](../mods/Danowar/F6_Board_Mount) - Mounts for FYSETCS F6 controller boards. -[FYSETC F6 1.3 Klipper Config](https://github.com/VoronDesign/Voron-2/tree/master/mods/Danowar/FYSETC_F6_V1.3_Klipper_Config) +[FYSETC F6 1.3 Klipper Config](../mods/Danowar/FYSETC_F6_V1.3_Klipper_Config) - Klipper config for a FYSETC F6 350 build. -[Load Cell Spool Holder](https://github.com/VoronDesign/Voron-2/tree/master/mods/Danowar/Load_Cell_Spool_Holder) +[Load Cell Spool Holder](../mods/Danowar/Load_Cell_Spool_Holder) - Spool holder with built in weight scale. -[Tablet mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Danowar/Tablet_Mount) +[Tablet mount](../mods/Danowar/Tablet_Mount) - Detachable mount for tablet using magnets. ## Dunar -[Panel Rest](https://github.com/VoronDesign/Voron-2/tree/master/mods/Dunar/Panel_Rest) +[Panel Rest](../mods/Dunar/Panel_Rest) - External panel holder ## FHeilmann -[Voron 2.0 5mm Parts](https://github.com/VoronDesign/Voron-2/tree/master/mods/FHeilmann/VORON2_5mm_Parts) +[Voron 2.0 5mm Parts](../mods/FHeilmann/VORON2_5mm_Parts) - Parts modified for extrusions with 5mm gap. -[Voron 2.1 5mm Parts](https://github.com/VoronDesign/Voron-2/tree/master/mods/FHeilmann/VORON2.1_5mm_parts) +[Voron 2.1 5mm Parts](../mods/FHeilmann/VORON2.1_5mm_parts) - Parts modified for extrusions with 5mm gap. ## Fulg -[PanelDue5 LCD Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Fulg/VORON2/PanelDue5) +[PanelDue5 LCD Mount](../mods/Fulg/VORON2/PanelDue5) - Mount for the PanelDue5 LCD display. ## GSL12 -[WAGO 221 Mounts](https://github.com/VoronDesign/Voron-2/tree/master/mods/GSL12/wago_221_mount) +[WAGO 221 Mounts](../mods/GSL12/wago_221_mount) ## Glowtape -[MKS GenL 1.0 Mounting Bracket](https://github.com/VoronDesign/Voron-2/tree/master/mods/Glowtape) +[MKS GenL 1.0 Mounting Bracket](../mods/Glowtape) ## GustavTheMighty -[4.3 PanelDue Case](https://github.com/VoronDesign/Voron-2/tree/master/mods/GustavtheMighty/4.3-Paneldue_Case) +[4.3 PanelDue Case](../mods/GustavtheMighty/4.3-Paneldue_Case) - Case/mount for the 4.3 PanelDue LCD Display. ## Hackdoggo -[BMGobius](https://github.com/VoronDesign/Voron-2/tree/master/mods/hackdoggo/v2/bmgobius) +[BMGobius](../mods/hackdoggo/v2/bmgobius) - Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears. ## Jass_on -[Tempered glass clips/handle](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jass_on/Voron_2.1.1_Tempered_Glass) +[Tempered glass clips/handle](../mods/Jass_on/Voron_2.1.1_Tempered_Glass) - Panel clips and handles for using tempered glass side panels. -[Rear panel clips](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jass_on) +[Rear panel clips](../mods/Jass_on) -[SKR 1.3 Cooling bracket](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jass_on) +[SKR 1.3 Cooling bracket](../mods/Jass_on) - SKR 1.3 mount with built in 40mm fan mount. ## JeJeff -[2020 Extrusion slot cover](https://github.com/VoronDesign/Voron-2/tree/master/mods/JeJeff/VORON2.1/2020_5mm_Slot_Cover) +[2020 Extrusion slot cover](../mods/JeJeff/VORON2.1/2020_5mm_Slot_Cover) - Slot covers for extrusions with 5mm slot width. -[Cable Tie Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/JeJeff/VORON2.1/Cable_Tie_Mount) +[Cable Tie Mount](../mods/JeJeff/VORON2.1/Cable_Tie_Mount) - Cable tie mounts for 4mm cable ties. -[Main Plug Panel](https://github.com/VoronDesign/Voron-2/tree/master/mods/JeJeff/VORON2.1/Mains_Plug_Panel_with_RJ45_Panel_Mount) +[Main Plug Panel](../mods/JeJeff/VORON2.1/Mains_Plug_Panel_with_RJ45_Panel_Mount) - Main Plug Panel modified to hold a RJ45 ethernet socket. ## Jink -[Coroplast mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jink/VORON_2.1/Coroplast_Mount) +[Coroplast mount](../mods/Jink/VORON_2.1/Coroplast_Mount) - Mount / Bracket supporting the coroplast sheets. -[Filament runout sensor mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jink/VORON_2.1/Filament_Runout_Sensor_Mount) +[Filament runout sensor mount](../mods/Jink/VORON_2.1/Filament_Runout_Sensor_Mount) -[Left handed RAMPS mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jink/VORON_2.1/Left_Handed_Ramps_Mount) +[Left handed RAMPS mount](../mods/Jink/VORON_2.1/Left_Handed_Ramps_Mount) - Mirrored RAMPS bracket. -[Spool holder with scale](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jink/VORON_2.1/Spool_Holder_With_Scale) +[Spool holder with scale](../mods/Jink/VORON_2.1/Spool_Holder_With_Scale) -[WAGO Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Jink/VORON_2.1/WAGO_Mount) +[WAGO Mount](../mods/Jink/VORON_2.1/WAGO_Mount) - Mount for 3x WAGO connectors. ## JustinVoelker -[Mains Plug Panel with RJ45](https://github.com/VoronDesign/Voron-2/tree/master/mods/JustinVoelker/VORON2) +[Mains Plug Panel with RJ45](../mods/JustinVoelker/VORON2) - Mains plug panel with ethernet cutout. ## K1JWG -[PanelDue 7i Custom Logo](https://github.com/VoronDesign/Voron-2/tree/master/mods/K1JWG/PanelDue7iLogo) +[PanelDue 7i Custom Logo](../mods/K1JWG/PanelDue7iLogo) - Custom Voron 2 logo for use as a PanelDue 7i startup splash screen. ## Koios -[Front Panel Locks](https://github.com/VoronDesign/Voron-2/tree/master/mods/Koios/6mm_Glass) +[Front Panel Locks](../mods/Koios/6mm_Glass) - Front panel locks for 6mm tempered glass panels. -[Logitech C920 Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Koios) +[Logitech C920 Mount](../mods/Koios) - Mount for C920 secured to the top front extrusion. -[LED Mounts](https://github.com/VoronDesign/Voron-2/tree/master/mods/Koios) +[LED Mounts](../mods/Koios) - Different mounts for LED light bars. ## Railgunner -[Dual Direct Drive X Carriage](https://github.com/VoronDesign/Voron-2/tree/master/mods/Railgunner/10mmBMGx2) +[Dual Direct Drive X Carriage](../mods/Railgunner/10mmBMGx2) - Dual direct drive using 2x Bondtech BMG. ## Seamen -[RAMPS Extender Holder](https://github.com/VoronDesign/Voron-2/tree/master/mods/Railgunner/10mmBMGx2) +[RAMPS Extender Holder](../mods/Railgunner/10mmBMGx2) - Mount for RAMPS board with the stepper extender. ## Sparreau -[5V Power Supply Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau) +[5V Power Supply Mount](../mods/Sparreau) -[FSR Circuit Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau) +[FSR Circuit Mount](../mods/Sparreau) - Bracket for mounting the FSR PCB. -[Z Rail Stop](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau) +[Z Rail Stop](../mods/Sparreau) -[Bed Extrusion Spacer](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau) +[Bed Extrusion Spacer](../mods/Sparreau) -[Dial Indicator Fan Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau) +[Dial Indicator Fan Mount](../mods/Sparreau) - Mount for attaching a dial indicator to the X Carriage. -[Mains Plug Panel Parametric](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau) +[Mains Plug Panel Parametric](../mods/Sparreau) - Scalable mains plug panel with small modifications. -[Z Idler Frame Extra Tab](https://github.com/VoronDesign/Voron-2/tree/master/mods/Sparreau) +[Z Idler Frame Extra Tab](../mods/Sparreau) - An extra tab added to the Z idler to prevent sagging / rotation. ## Stephan -[M12 Probeholder](https://github.com/VoronDesign/Voron-2/tree/master/mods/Stephan/M12_probeholder) +[M12 Probeholder](../mods/Stephan/M12_probeholder) - Drop in replacement of the stock probe to a M12. -[BlTouch Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/Stephan/bltouch_mount) +[BlTouch Mount](../mods/Stephan/bltouch_mount) - Drop in replacement of the stock probe to a BLTouch. ## daveidmx -[30mm Fan Adapter](https://github.com/VoronDesign/Voron-2/tree/master/mods/daveidmx/VORON2) +[30mm Fan Adapter](../mods/daveidmx/VORON2) - 30mm fan adapter for the X carriage. ## etherwalker -[Pi Zero Camera Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/etherwalker/Pi_Zero_Camera_Mount) +[Pi Zero Camera Mount](../mods/etherwalker/Pi_Zero_Camera_Mount) ## exquyre -[Anet 12864 Display](https://github.com/VoronDesign/Voron-2/tree/master/mods/exquyre/Anet_12864_display) +[Anet 12864 Display](../mods/exquyre/Anet_12864_display) - Case for Anet 12864 LCD display. -[LED Bar Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/exquyre/LED_bar_mount) +[LED Bar Mount](../mods/exquyre/LED_bar_mount) - Mount for 12V LED bars to the top extrusions. -[Cable Cover Insert](https://github.com/VoronDesign/Voron-2/tree/master/mods/exquyre/cable_cover) +[Cable Cover Insert](../mods/exquyre/cable_cover) - Room for 3-4 20AWG wires. -[Einsy + RAMPS Combo](https://github.com/VoronDesign/Voron-2/tree/master/mods/exquyre/einsy%2Bramps) +[Einsy + RAMPS Combo](../mods/exquyre/einsy%2Bramps) - Mounting bracket for 1 Einsy and 1 RAMPS. ## hiemmer -[Tool Holders](https://github.com/VoronDesign/Voron-2/tree/master/mods/hiemmer/Tool_Holders) +[Tool Holders](../mods/hiemmer/Tool_Holders) - Tool holder for calipers, screwdriver etc. ## nemgrea -[Magnetic Split Front Door](https://github.com/VoronDesign/Voron-2/tree/master/mods/nemgrea/magnetic_split_front_door) +[Magnetic Split Front Door](../mods/nemgrea/magnetic_split_front_door) - Hinges, handles and magnet mounts for creating a split front door panel. ## pnokel -[Cable Zipper](https://github.com/VoronDesign/Voron-2/tree/master/mods/pnokel) +[Cable Zipper](../mods/pnokel) - Small mount to secure wires with zip ties. -[Coroplast holders](https://github.com/VoronDesign/Voron-2/tree/master/mods/pnokel) +[Coroplast holders](../mods/pnokel) - Different coroplast holders for added support. -[Toothed Idler](https://github.com/VoronDesign/Voron-2/tree/master/mods/pnokel) +[Toothed Idler](../mods/pnokel) - 14.5mm toothed idler. ## steve450 -[Corner Brackets](https://github.com/VoronDesign/Voron-2/tree/master/mods/steve450/Voron2.1) +[Corner Brackets](../mods/steve450/Voron2.1) - Corner brackets preventing rotation of the extrusions, and stiffening the joints. Also covers the Z-belt hole for improved aesthetics. ## synfinatic -[Duet Fan Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/synfinatic/Duet-Fan-Mount) +[Duet Fan Mount](../mods/synfinatic/Duet-Fan-Mount) - Duet/Duex fan mount with air vents directly above the steppers to increase airflow. -[E-Stop Switch](https://github.com/VoronDesign/Voron-2/tree/master/mods/synfinatic/E-Stop-Switch) +[E-Stop Switch](../mods/synfinatic/E-Stop-Switch) - Mount for emergency button attached to the top of the printer. -[Filament DryBox](https://github.com/VoronDesign/Voron-2/tree/master/mods/synfinatic/Filament-DryBox) +[Filament DryBox](../mods/synfinatic/Filament-DryBox) - Mount for filament drybox attached to the side of the printer. -[LED Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/synfinatic/LED-Mount) +[LED Mount](../mods/synfinatic/LED-Mount) - Mount for LED lightbars. -[PS Extra Bracket](https://github.com/VoronDesign/Voron-2/tree/master/mods/synfinatic/PS-Extra-Bracket) +[PS Extra Bracket](../mods/synfinatic/PS-Extra-Bracket) - Extra bracket to keep the power supply in place. -[RJ45 Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/synfinatic/RJ45-Mount) +[RJ45 Mount](../mods/synfinatic/RJ45-Mount) - Mount for an ethernet coupler to extend / move the ethernet plug somewhere more convenient. ## warriorofwire -[Openbuilds Drag Chain](https://github.com/VoronDesign/Voron-2/tree/master/mods/warriorofwire/openbuilds_drag_chain) +[Openbuilds Drag Chain](../mods/warriorofwire/openbuilds_drag_chain) - Collection of models for using an off-the-shelf, cheap, snap opening drag chain for gantry wiring and protecting wires down to the deck. ## wile.e.coyote -[Coroplast Support](https://github.com/VoronDesign/Voron-2/tree/master/mods/wile.e.coyote) +[Coroplast Support](../mods/wile.e.coyote) - Support for the coroplast to prevent sagging. -[Dual Buck Bracket](https://github.com/VoronDesign/Voron-2/tree/master/mods/wile.e.coyote) +[Dual Buck Bracket](../mods/wile.e.coyote) - Mounting bracket for 2 buck converters. -[Nozzle Scrubber Mount](https://github.com/VoronDesign/Voron-2/tree/master/mods/wile.e.coyote) +[Nozzle Scrubber Mount](../mods/wile.e.coyote) - Mount for brass brush. Used for cleaning nozzle before printing. -[Wago Mounts](https://github.com/VoronDesign/Voron-2/tree/master/mods/wile.e.coyote) +[Wago Mounts](../mods/wile.e.coyote) - Different mounts for Wago connectors. diff --git a/Seamen/RAMPS-Extender_holder/README.md b/Seamen/RAMPS-Extender_holder/README.md index 9fae366a2..8a69f6c7c 100644 --- a/Seamen/RAMPS-Extender_holder/README.md +++ b/Seamen/RAMPS-Extender_holder/README.md @@ -1,5 +1,5 @@ # VORON2-Mods -Mods for the VORON2 3D-Printer https://github.com/mzbotreprap/VORON +Mods for the VORON2 3D-Printer This is a holder for the RAMPS board with the stepper extender. diff --git a/hackdoggo/v2/bmgobius/readme.txt b/hackdoggo/v2/bmgobius/readme.txt deleted file mode 100644 index 0ae25802e..000000000 --- a/hackdoggo/v2/bmgobius/readme.txt +++ /dev/null @@ -1,25 +0,0 @@ -This is a modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears. -https://github.com/mzbotreprap/VORON/tree/master/STLs/VORON2/VORON%20Mobius - -You will need to substitue the 45mm long 5mm diameter shaft for a 60mm long shaft -2x M3x20 -1x M3x12 -2x M3 Nuts -2x M3 Washers - -The rest of the hardware is the same with the obvious replacement of the MK8 and bearing with Bondtech drivegears. - -BMGobius Specific Parts to Print: - -BMGobius Body A -BMGobius Body B -BMGobius Idler A -BMGobius Idler B - -Stock Mobius Parts: -tensioner_dial -mobius_mount -jog_dial -bsp_adapter - -Remember to put a dab of butter or your choice of lube on the gear section of the drive gears and the roller bearings. \ No newline at end of file diff --git a/synfinatic/PS-Extra-Bracket/README.md b/synfinatic/PS-Extra-Bracket/README.md index a861757c4..c3a66a5a3 100644 --- a/synfinatic/PS-Extra-Bracket/README.md +++ b/synfinatic/PS-Extra-Bracket/README.md @@ -3,7 +3,7 @@ ### Overview By default, the Voron2 uses -[two brackets](https://github.com/mzbotreprap/VORON/blob/master/STLs/VORON2/Base%20Compartment/psu_bracket_x2.stl) +[two brackets](PS-Extra-Bracket.stl) to mount the 200W 24V power supply to the extrusions. This works very well if you mount it to both extrusions holding your bed, but if your extrusions are mounted too far apart, then you'll need an extra bracket so that power supply