Fixed folder naming and rotated part

Folder name needed to not have spaces, was fixed.  Part was rotated so
it can be printed as modeled.

printer_mods/README.md

@@ -90,7 +90,7 @@ If your mod is lacking a column in the compatibility matrix, feel free to submit
 |pnokel |[Cable Zipper](./pnokel) |Small mount to secure wires with zip ties |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: |
 | |[Coroplast holders](./pnokel) | Different coroplast holders for added support |:x:| :heavy_check_mark:|:grey_question: |
 | |[Toothed Idler](./pnokel) |14.5mm toothed idler | :x: | :x: |:x:|
-| przybybr|[V2.1 Omron Mount](./przybybr/Voron V2_1 Omron Mount/) | Mount for Omron probe in V2.1 | :grey_question:|:heavy_check_mark: | :x:|
+| przybybr|[V2.1 Omron Mount](./przybybr/V2_1OmronMount/) | Mount for Omron probe in V2.1 | :grey_question:|:heavy_check_mark: | :x:|
 | Railgunner|[Dual Direct Drive X Carriage](./Railgunner/10mmBMGx2) |Dual direct drive using 2x Bondtech BMG | :grey_question:|:grey_question: |:grey_question: |
 | Seamen|[RAMPS Extender Holder](./Seamen/RAMPS-Extender_holder) |Mount for RAMPS board with the stepper extender |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: |
 |Sparreau | [5V Power Supply Mount](./Sparreau)|5V Power Supply Mount |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: |

printer_mods/przybybr/V2_1OmronMount/README.md

@@ -0,0 +1 @@
+This mount allows an Omron probe to be mounted in a Voron V2.1 printer.  Print two, install sensor with indicator light on left side so it will be visible with sensor installed.

printer_mods/przybybr/Voron V2_1 Omron Mount/README.md

@@ -1 +0,0 @@
-This mount allows an Omron probe to be mounted in a Voron V2.1 printer.  Print two, both with the pegs facing up.