diff --git a/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/README.md b/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/README.md
new file mode 100644
index 000000000..e3a571f30
--- /dev/null
+++ b/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/README.md
@@ -0,0 +1,24 @@
+# What is this? 
+
+## A simple Z belt clip
+
+The 2.4 manual suggested leaving 1 to 2 inch Z belts, however, when the panels are up, the extra belt can drag along the panel. Not sure about adversary effects but not a bad idea to keep it tidy. The clip works for 9mm width belts, also should fit 6 mm. Just print and slide on.
+
+Extra belts before panel
+![Extra belts before panel](/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/imgs/IMG_3018.jpg)
+
+Extra belts with panel 
+![Extra belts with panel](/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/imgs/IMG_3019.jpg)
+
+
+Installed Clip, all cleaned up! 
+![Installed Clip, all cleaned up! ](/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/imgs/IMG_3020.jpg)
+
+
+
+
+
+
+
+
+
diff --git a/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/imgs/IMG_3018.jpg b/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/imgs/IMG_3018.jpg
new file mode 100644
index 000000000..026edbf26
Binary files /dev/null and b/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/imgs/IMG_3018.jpg differ
diff --git a/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/imgs/IMG_3019.jpg b/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/imgs/IMG_3019.jpg
new file mode 100644
index 000000000..c5bd0b869
Binary files /dev/null and b/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/imgs/IMG_3019.jpg differ
diff --git a/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/imgs/IMG_3020.jpg b/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/imgs/IMG_3020.jpg
new file mode 100644
index 000000000..5b0b594ee
Binary files /dev/null and b/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/imgs/IMG_3020.jpg differ
diff --git a/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/z_belt_clipX4.stl b/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/z_belt_clipX4.stl
new file mode 100644
index 000000000..2b938fed5
Binary files /dev/null and b/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/z_belt_clipX4.stl differ
diff --git a/printer_mods/README.md b/printer_mods/README.md
index c2da2d55c..9e1acdf41 100644
--- a/printer_mods/README.md
+++ b/printer_mods/README.md
@@ -79,6 +79,7 @@ like so:
  || [2-Channel Relay DIN Rail Bracket](./ByteChild/2_Channel_Relay_DIN_Rail_Bracket) | DIN Rail mounting bracket for an 2-Channel-Relay | :x: | :grey_question: | :heavy_check_mark: | :x: |
 |bythorsthunder|[MGN9 Backers Idlers](./bythorsthunder/MGN9_Backers)|New idler uppers for MGN9 Extrusion backers |:x:|:x:|:heavy_check_mark:|:x:|:x:|
 | Ch4rlesB | [V0 Handles Slim](./Ch4rlesB/V0_Handles_Slim) | Simple and slim handles for the V0 | :heavy_check_mark: | :x: | :x: | :x: |
+| ChenTheDesignMaker | [Z Belt Clip](./ChenTheDesignMaker/Z_Belt_Clip) | Simple clip to keep extra Z belts clean and away from panels | :x: | :x: | :heavy_check_mark: | :x: | :x:|
 | chrisrgonzales | [270° Front Panel Hinge](./chrisrgonzales/270_degree_hinge) | Hinges that have 270° of swivel, parametric CAD included | :x: | :x: | :heavy_check_mark: | :x: |
 | christophmueller | [Phaetus and Zodiac Dragonfly BMO Afterburner toolheads](./christophmueller/Phaetus_Dragonfly_BMO_Afterburner) | Covers both the original Phaetus variant as well as the Zodiac one. | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |
 | chri.kai.in | [Angry CAM USB](./chri.kai.in/Angry_CAM_USB) | Housing for small USB camera module, allowing mounting to gantry or frame profiles | :x: | :grey_question: | :heavy_check_mark: | :grey_question: | :grey_question: |