diff --git a/printer_mods/KiloQubit/trident_schurter_power_inlet/README.md b/printer_mods/KiloQubit/trident_schurter_power_inlet/README.md
index ffcd8d99d..da0c4b65e 100644
--- a/printer_mods/KiloQubit/trident_schurter_power_inlet/README.md
+++ b/printer_mods/KiloQubit/trident_schurter_power_inlet/README.md
@@ -1,7 +1,14 @@
-Trident Inlet Skirt For Schurter DD11.0124
-==========================================
+Trident Inlet Skirt For Schurter DD11.0114 and DD11.0124
+========================================================
 
-This is a modified inlet skirt for VORON Trident to install a [Schurter DD11.0124](https://www.digikey.com/en/products/detail/schurter-inc/DD11-0124-1111/1646872)  or similar power inlet.
+This is a modified inlet skirt for VORON Trident to install a Schurter DD11.0114.1111 or DD11.0124.1111 or similar power inlet.
+
+Note that you'll also need to purchase a fuse drawer for these inlets.
+
+Type        | Inlet                                                                                            | Fuse Drawer
+----------- | ------------------------------------------------------------------------------------------------ | -----------
+single fuse | [DD11.0114.1111](https://www.digikey.com/en/products/detail/schurter-inc/DD11-0114-1111/1646866) | [4301.1405](https://www.digikey.com/en/products/detail/schurter-inc/4301-1405/640643)
+dual fuse   | [DD11.0124.1111](https://www.digikey.com/en/products/detail/schurter-inc/DD11-0124-1111/1646872) | [4301.1401](https://www.digikey.com/en/products/detail/schurter-inc/4301-1401/569920)
 
 Print using standard VORON print settings.  You'll need the same 2 heatset inserts and 2 FHCS screws as the stock filtered inlet to mount this.