diff --git a/printer_mods/README.md b/printer_mods/README.md
index 2767366b7..408d3308a 100644
--- a/printer_mods/README.md
+++ b/printer_mods/README.md
@@ -210,6 +210,7 @@ like so:
 | | [V0 PiCam Mount](./xbst_/V0_Picam)| A Raspberry Pi Camera Mount For V0 | :heavy_check_mark: | :x: | :x: | :x: |
 | | [DuetZero](./xbst_/DuetZero) | Pi Zero mount over a Duet2 for space saving | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |:x:|
 | Xceled | [Single Panel Magnet Mount](./xceled/Single_Panel_Magnet_Mount)| Mount your front panel using only magnets | :x: |:grey_question: |:heavy_check_mark: |:x:|
+| Yeri | [V0 Magnetic Front Panel](./yeri/V0_Magnetic_Front_Panel)| Mount V0 front panel with magnets, removes need for hinges | :heavy_check_mark: | :x: | :x: | :x: |
 | Zen3D | [V0 Handle](./Zen3D/V0_Handle)| Voron0 Handle for 3mm panels | :heavy_check_mark: |:x: |:x: |:x:|
 | | [V0 MidPanel HexPattern](./Zen3D/V0_MidPanel_HexPattern)| Voron0 MidPanel with Hex pattern and Wire cover  | :heavy_check_mark: |:x: |:x: |:x:|
 | | [V0 Skirt set](./Zen3D/V0_Skirt)| SSR, PowerSwitch, Nameplate and color change printing  | :heavy_check_mark: |:x: |:x: |:x:|
diff --git a/printer_mods/yeri/V0_Magnetic_Front_Panel/Mounting_Plate_v2.stl b/printer_mods/yeri/V0_Magnetic_Front_Panel/Mounting_Plate_v2.stl
new file mode 100644
index 000000000..b043f69e2
Binary files /dev/null and b/printer_mods/yeri/V0_Magnetic_Front_Panel/Mounting_Plate_v2.stl differ
diff --git a/printer_mods/yeri/V0_Magnetic_Front_Panel/Panel_Mount_v2.stl b/printer_mods/yeri/V0_Magnetic_Front_Panel/Panel_Mount_v2.stl
new file mode 100644
index 000000000..dd891ec92
Binary files /dev/null and b/printer_mods/yeri/V0_Magnetic_Front_Panel/Panel_Mount_v2.stl differ
diff --git a/printer_mods/yeri/V0_Magnetic_Front_Panel/README.md b/printer_mods/yeri/V0_Magnetic_Front_Panel/README.md
new file mode 100644
index 000000000..3e7360b39
--- /dev/null
+++ b/printer_mods/yeri/V0_Magnetic_Front_Panel/README.md
@@ -0,0 +1,18 @@
+This mod comes in two parts, a fixed mounting plate which anchors to the v0 frame with m3x6 screws and a detachable front plate which holds the acrylic panel.
+
+## BOM:
+- 6 - M3x6 screws
+- 6 - M3 nuts
+- 22 - 6x3mm magnets
+- Printed parts
+  
+## Assembly instructions:
+
+1. Remove front two feet from V0
+2. Preload 3 m3 nuts to each front extrusion
+3. Attach mounting plate to front of V0 with M3x6 screws
+4. Insert magnets into the 11 holes on the mounting plate
+5. Using VHB tape, affix clear acrlyic to the panel mount part
+6. Insert magnets into the 11 holes on the panel mount, be sure to match polarity properly!
+7. Re-attach front two feet 
+