diff --git a/printer_mods/Ferdi360/2.4 Backplates/README.md b/printer_mods/Ferdi360/2.4 Backplates/README.md
index 0cf9c5a60..f0fc164b5 100644
--- a/printer_mods/Ferdi360/2.4 Backplates/README.md	
+++ b/printer_mods/Ferdi360/2.4 Backplates/README.md	
@@ -1,4 +1,4 @@
-# Backplates for Voron 2.4
+# Bedfan Backplates for Voron 2.4
 **What is it?**
 Backplates for your Voron 2.4 that block hot air out of your bedfans from blowing onto your ACM panels to (slightly) improve airflow and temps. Also a nice way to showoff Voron branding and the serial of your printer.
 
@@ -9,9 +9,11 @@ If you have standard bed spacers (8 mm), a magnet+PEI sheet and the normal Steal
 You should also make sure you have managed your AB motor cables (and connectors if you added those), so they don't get crushed.
 
 **Instructions:**
-The STL's are “blank” plates without serial numbers. I added a Fusion360 file in which you can edit the text in the similar named sketch. 
+The STL's are “blank” plates without serial numbers. I added a Fusion360 file in which you can edit the text in the similar named sketch. Or you can add text in Prusaslicer for example.  
 Print with 3 perimeters and 1% infill. If you do a color change after layer one, you get a nice effect. 
 Stick on a bit of 1mm foam tape (BOM for the back and top panel) to prevent it from resonating against the back panel.
 Mount it with a few (according to size) 8mm M3 SHCS and hammerhead t-nuts.
 
 I have tested on a 350 2.4, i would love to hear if the smaller sizes work well too! 
+
+![alt text](https://github.com/Ferdi360/VoronUsers/blob/master/printer_mods/Ferdi360/2.4%20Backplates/Images/2.4%20Backplates.PNG)https://github.com/Ferdi360/VoronUsers/blob/master/printer_mods/Ferdi360/2.4%20Backplates/Images/2.4%20Backplates.PNG)