diff --git a/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/README.md b/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/README.md
new file mode 100644
index 000000000..0b843394e
--- /dev/null
+++ b/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/README.md
@@ -0,0 +1,3 @@
+# Modded Dragon Toolhead
+
+This is a small mod of the original V0 dragon toolhead that uses the stock M2.5x8 screws that came with the dragon hotend so the "M2.5x12 SHCS (for dragon hotend only)" from the sourcing guide are not needed anymore.
diff --git a/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/Toolhead_Left_Dragon_x1.stl b/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/Toolhead_Left_Dragon_x1.stl
new file mode 100644
index 000000000..3478ac2f5
Binary files /dev/null and b/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/Toolhead_Left_Dragon_x1.stl differ
diff --git a/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/Toolhead_Right_Dragon_x1.stl b/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/Toolhead_Right_Dragon_x1.stl
new file mode 100644
index 000000000..5977766ed
Binary files /dev/null and b/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/Toolhead_Right_Dragon_x1.stl differ
diff --git a/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/[a]_Toolhead_Blower_Duct_Left_x1.stl b/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/[a]_Toolhead_Blower_Duct_Left_x1.stl
new file mode 100644
index 000000000..1e6ed2045
Binary files /dev/null and b/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/[a]_Toolhead_Blower_Duct_Left_x1.stl differ
diff --git a/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/[a]_Toolhead_Blower_Duct_Right_x1.stl b/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/[a]_Toolhead_Blower_Duct_Right_x1.stl
new file mode 100644
index 000000000..5bb0632d3
Binary files /dev/null and b/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/[a]_Toolhead_Blower_Duct_Right_x1.stl differ
diff --git a/printer_mods/README.md b/printer_mods/README.md
index e10f4815f..09f530d3c 100644
--- a/printer_mods/README.md
+++ b/printer_mods/README.md
@@ -66,6 +66,7 @@ like so:
 |mjoaris |[10x11 Cable Chain Endcaps](./mjoaris/10x11_Cable_Chain_Endcaps) |Printable Endcaps for 10x11 Cable Chains |:x: |:heavy_check_mark: |:heavy_check_mark: |
 | |[Mini12864 LCD Mount](./mjoaris/Mini12864_LCD_Mount_for_V2.4) |Swiveling case for the Fysetc Mini12864 LCD |:x: |:grey_question: |:heavy_check_mark: |
 |Mosher|[Door hinges with M3 screws shafts](./mosher/m3_door_hinges) |Simple mod of print in place door hinges, which uses m3 screws as shafts. |:x:|:x:|:heavy_check_mark:|
+|Nashuar|[V0 Dragon Toolhead M2.5x8](./Nashuar/V0_Dragon_ToolheadStockScrews) |This toolhead uses the stock M2.5 screw that came with the dragon hotend |:heavy_check_mark:|:x:|:x:|
 |natewalck |[V1.8 Jigs](./natewalck/v1.8_Jigs) |Jigs for assembling V1.8 |:x: |:heavy_check_mark: |:x: |
 |Nomsplease |[60mm Shaft Jig](./Nomsplease/60mm_Shaft_Jig) |Simple jig for cutting and grinding 60mm Z shafts |:x: |:x: |:heavy_check_mark: |
 | |[Duet Wifi Mount](./Nomsplease/V0_Mods/duet_wifi_mount) | Duet wifi mount in pocketwatch location |:heavy_check_mark: |:x: |:x: |