diff --git a/printer_mods/README.md b/printer_mods/README.md
index 1c8f3f194..802f16547 100644
--- a/printer_mods/README.md
+++ b/printer_mods/README.md
@@ -383,6 +383,7 @@ Printer mods for Voron 3D printers
| | [Jetpack V0 base](tameike/Jetpack_V0) | Attach Jetpack to V0 frame | V0.2 | 2024-01-08T16:38:25+00:00 |
| | [TacoRaven Mounting Frame](tameike/V0_TR_Mounting_Frame) | TR V0 mount | V0.2 | 2024-01-08T16:38:25+00:00 |
| tayto-chip | [V2.4 Skirt Switch Mod](tayto-chip/skirt_switch_mod) | Add a ON/OFF Switch to side or front skirts | V2.4 | 2024-01-08T16:38:25+00:00 |
+| techprolet | [2020 Aplic Cam Mount](techprolet/2020_aplic_cam_mount) | Aplic HD camera to the 2020 frame at bed level. | V2.4r2 | 2024-03-14T16:27:05+00:00 |
| teookie | [AB dial indicator mount](teookie/AB_dial_indicator_mount) | Mount for attaching standard dial indicators to AB | V1.8, V2.4, VSW | 2024-01-08T16:38:25+00:00 |
| | [SKR Brace](teookie/skr_brace) | Rigidize and stabilize SKR 1.4 mounts | V2.4 | 2024-01-08T16:38:25+00:00 |
| th0mpy | [BEEFY Din Clips](th0mpy/beefy-din) | Two piece BEEFY Din Clips, holds stronger | V2.4 | 2024-01-08T16:38:25+00:00 |
@@ -404,26 +405,26 @@ Printer mods for Voron 3D printers
| wile-e1 | [Deck Panel Support Clips](wile-e1/Deck_Panel_Support_Clips) | Clips to help support lower deck panels to prevent (or fix) warping: | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 |
| | [Stealthburner + CW1 + PCB Cover](wile-e1/Stealthburner_CW1_PCB_Cover) | Low-poly for Stealthburner + CW1 + PCB installations: | V1.8, V2.4, VSW | 2024-01-08T16:38:25+00:00 |
| wrez | [V0 Alternate IEC 320 C14 Power...](wrez/astrodyne-inlet) | Drop in replacement for alternate-source power inlet if spec inlet... | V0.2 | 2024-01-08T16:38:25+00:00 |
-| xbst_ | [ADXL345 V0 Mount](xbst_/ADXL345_V0_Mount) | V0 Mount for a ADXL345 module | V0.2 | 2024-01-08T16:38:25+00:00 |
-| | [Car Hood Style Bed Hinge](xbst_/Bed_Hinge) | A way of reaching electronics from the top by having a "car hood"... | V2.4 | 2024-01-08T16:38:25+00:00 |
-| | [Duct Mount](xbst_/Duct_Mount) | 100mm/4" ducting mount for ventilation. Also supports umbilical... | V2.4 | 2024-01-08T16:38:25+00:00 |
-| | [DuetZero](xbst_/DuetZero) | Pi Zero mount over a Duet2 for space saving | V0.2, V1.8, V2.4 | 2024-01-08T16:38:25+00:00 |
-| | [Easy Access Rear Panels](xbst_/Easy_Access_Rear_Panels_v0) | New rear panels designed to expose the extruder for easy filament... | V0.2 | 2024-01-08T16:38:25+00:00 |
-| | [Flat V2.4 Skirts](xbst_/Flat_Skirts) | Flat V2.4 Skirts so a panel without cutouts can be used | V2.4 | 2024-01-08T16:38:25+00:00 |
+| xbst_ | [ADXL345 V0 Mount](xbst_/ADXL345_V0_Mount) | V0 Mount for a ADXL345 module | V0.2 | 2024-03-14T14:43:28+00:00 |
+| | [Car Hood Style Bed Hinge](xbst_/Bed_Hinge) | A way of reaching electronics from the top by having a "car hood"... | V2.4 | 2024-03-14T14:43:28+00:00 |
+| | [Duct Mount](xbst_/Duct_Mount) | 100mm/4" ducting mount for ventilation. Also supports umbilical... | V2.4 | 2024-03-14T14:43:28+00:00 |
+| | [DuetZero](xbst_/DuetZero) | Pi Zero mount over a Duet2 for space saving | V0.2, V1.8, V2.4 | 2024-03-14T14:43:28+00:00 |
+| | [Easy Access Rear Panels](xbst_/Easy_Access_Rear_Panels_v0) | New rear panels designed to expose the extruder for easy filament... | V0.2 | 2024-03-14T14:43:28+00:00 |
+| | [Flat V2.4 Skirts](xbst_/Flat_Skirts) | Flat V2.4 Skirts so a panel without cutouts can be used | V2.4 | 2024-03-14T14:43:28+00:00 |
| | [Hat LED Mount](xbst_/Hat_LED_Mount) | Top Hat LED module mount | V0.2 | 2024-01-08T16:38:25+00:00 |
-| | [HOYMK SSR Mount](xbst_/HOYMK_SSR_Mount) | Mount for Chinese HOYMK SSR | V0.2 | 2024-01-08T16:38:25+00:00 |
+| | [HOYMK SSR Mount](xbst_/HOYMK_SSR_Mount) | Mount for Chinese HOYMK SSR | V0.2 | 2024-03-14T14:43:28+00:00 |
| | [PCB LED Holder](xbst_/LED_Holder) | Very simple mount for some (?) PCB LED Bars | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 |
-| | [DIN Mount Max31865](xbst_/Max31865_DIN_Mount) | A simple DIN rail mount for the Adafruit (or SAME SIZE clone)... | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 |
-| | [DIN Mount Omron Relay](xbst_/Omron_DIN_Mount) | A simple DIN rail mount for the BOM Relay | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 |
-| | [DIN Mount Pi 4x Relay Board](xbst_/Relay_DIN_Mount) | A simple DIN rail mount for the 4 channel relay board for Raspberry Pi | V1.8, V2.4 | 2024-01-08T16:38:25+00:00 |
-| | [V0 Electronics Cover](xbst_/V0_Electronic_Panel) | A printed cover for v0 electronics. Requires larger printer to print. | V0.2 | 2024-01-08T16:38:25+00:00 |
-| | [Mobius 4 (M4) V0 Mod](xbst_/V0_M4_Mod) | Mod to mount a M4 extruder to a Voron 0 where pocketwatch extruder... | V0.2 | 2024-01-08T16:38:25+00:00 |
-| | [V0 PiCam Mount](xbst_/V0_Picam) | A Raspberry Pi Camera Mount For V0 | V0.2 | 2024-01-08T16:38:25+00:00 |
-| | [Screwed Front Door Hinge](xbst_/V0_Screw_Front_Hinge_Mod) | Mod to screw the front door panel (instead of VHB) | V0.2 | 2024-01-08T16:38:25+00:00 |
+| | [DIN Mount Max31865](xbst_/Max31865_DIN_Mount) | A simple DIN rail mount for the Adafruit (or SAME SIZE clone)... | V1.8, V2.4 | 2024-03-14T14:43:28+00:00 |
+| | [DIN Mount Omron Relay](xbst_/Omron_DIN_Mount) | A simple DIN rail mount for the BOM Relay | V1.8, V2.4 | 2024-03-14T14:43:28+00:00 |
+| | [DIN Mount Pi 4x Relay Board](xbst_/Relay_DIN_Mount) | A simple DIN rail mount for the 4 channel relay board for Raspberry Pi | V1.8, V2.4 | 2024-03-14T14:43:28+00:00 |
+| | [V0 Electronics Cover](xbst_/V0_Electronic_Panel) | A printed cover for v0 electronics. Requires larger printer to print. | V0.2 | 2024-03-14T14:43:28+00:00 |
+| | [Mobius 4 (M4) V0 Mod](xbst_/V0_M4_Mod) | Mod to mount a M4 extruder to a Voron 0 where pocketwatch extruder... | V0.2 | 2024-03-14T14:43:28+00:00 |
+| | [V0 PiCam Mount](xbst_/V0_Picam) | A Raspberry Pi Camera Mount For V0 | V0.2 | 2024-03-14T14:43:28+00:00 |
+| | [Screwed Front Door Hinge](xbst_/V0_Screw_Front_Hinge_Mod) | Mod to screw the front door panel (instead of VHB) | V0.2 | 2024-03-14T14:43:28+00:00 |
| | [V0 Buttons & OLED Mount](xbst_/V0_Skirt_Buttons) | Mod to mount custom Gcode macro buttons & Waveshare 1.3" OLED display | V0.2 | 2024-01-08T16:38:25+00:00 |
-| | [V2.4 Fanless Middle Skirt](xbst_/V2.4_Fanless_Middle_Skirt) | A Fanless alternative middle side skirt | V2.4 | 2024-01-08T16:38:25+00:00 |
+| | [V2.4 Fanless Middle Skirt](xbst_/V2.4_Fanless_Middle_Skirt) | A Fanless alternative middle side skirt | V2.4 | 2024-03-14T14:43:28+00:00 |
| | [V2.4 Skirt Buttons](xbst_/V2.4_Skirt_Buttons) | Skirt mod for custom Gcode macro buttons | V2.4 | 2024-01-08T16:38:25+00:00 |
-| | [ZipClip V0](xbst_/ZipClip_v0) | Very simple ziptie mount for v0 1515 extrusions | V0.2 | 2024-01-08T16:38:25+00:00 |
+| | [ZipClip V0](xbst_/ZipClip_v0) | Very simple ziptie mount for v0 1515 extrusions | V0.2 | 2024-03-14T14:43:28+00:00 |
| xceled | [Single Panel Magnet Mount](xceled/Single_Panel_Magnet_Mount) | Mount your front panel using only magnets | V2.4 | 2024-01-08T16:38:25+00:00 |
| yenda | [SW More Robust XZ Belt Paths](yenda/vsw_more_robust_belt_paths) | Small mods to belt routing components to ensure a better/more... | VSW | 2024-01-08T16:38:25+00:00 |
| yeri | [V0 Magnetic Panels](yeri/V0_Magnetic_Panels) | Mount V0 panels with magnets, removes need for hinges and lets you... | V0.2 | 2024-01-08T16:38:25+00:00 |
diff --git a/printer_mods/mods.json b/printer_mods/mods.json
index f44bf0596..260882fac 100644
--- a/printer_mods/mods.json
+++ b/printer_mods/mods.json
@@ -4120,6 +4120,16 @@
],
"last_changed": "2024-01-08T16:38:25+00:00"
},
+ {
+ "path": "techprolet/2020_aplic_cam_mount",
+ "title": "2020 Aplic Cam Mount",
+ "creator": "techprolet",
+ "description": "Aplic HD camera to the 2020 frame at bed level.",
+ "printer_compatibility": [
+ "V2.4r2"
+ ],
+ "last_changed": "2024-03-14T16:27:05+00:00"
+ },
{
"path": "teookie/AB_dial_indicator_mount",
"title": "AB dial indicator mount",
@@ -4243,7 +4253,7 @@
"printer_compatibility": [
"V0.2"
],
- "last_changed": "2024-01-08T16:38:25+00:00"
+ "last_changed": "2024-03-14T14:43:28+00:00"
},
{
"path": "xbst_/Bed_Hinge",
@@ -4253,7 +4263,7 @@
"printer_compatibility": [
"V2.4"
],
- "last_changed": "2024-01-08T16:38:25+00:00"
+ "last_changed": "2024-03-14T14:43:28+00:00"
},
{
"path": "xbst_/Duct_Mount",
@@ -4263,7 +4273,7 @@
"printer_compatibility": [
"V2.4"
],
- "last_changed": "2024-01-08T16:38:25+00:00"
+ "last_changed": "2024-03-14T14:43:28+00:00"
},
{
"path": "xbst_/DuetZero",
@@ -4275,7 +4285,7 @@
"V1.8",
"V2.4"
],
- "last_changed": "2024-01-08T16:38:25+00:00"
+ "last_changed": "2024-03-14T14:43:28+00:00"
},
{
"path": "xbst_/Easy_Access_Rear_Panels_v0",
@@ -4285,7 +4295,7 @@
"printer_compatibility": [
"V0.2"
],
- "last_changed": "2024-01-08T16:38:25+00:00"
+ "last_changed": "2024-03-14T14:43:28+00:00"
},
{
"path": "xbst_/Flat_Skirts",
@@ -4295,7 +4305,7 @@
"printer_compatibility": [
"V2.4"
],
- "last_changed": "2024-01-08T16:38:25+00:00"
+ "last_changed": "2024-03-14T14:43:28+00:00"
},
{
"path": "xbst_/HOYMK_SSR_Mount",
@@ -4305,7 +4315,7 @@
"printer_compatibility": [
"V0.2"
],
- "last_changed": "2024-01-08T16:38:25+00:00"
+ "last_changed": "2024-03-14T14:43:28+00:00"
},
{
"path": "xbst_/Hat_LED_Mount",
@@ -4337,7 +4347,7 @@
"V1.8",
"V2.4"
],
- "last_changed": "2024-01-08T16:38:25+00:00"
+ "last_changed": "2024-03-14T14:43:28+00:00"
},
{
"path": "xbst_/Omron_DIN_Mount",
@@ -4348,7 +4358,7 @@
"V1.8",
"V2.4"
],
- "last_changed": "2024-01-08T16:38:25+00:00"
+ "last_changed": "2024-03-14T14:43:28+00:00"
},
{
"path": "xbst_/Relay_DIN_Mount",
@@ -4359,7 +4369,7 @@
"V1.8",
"V2.4"
],
- "last_changed": "2024-01-08T16:38:25+00:00"
+ "last_changed": "2024-03-14T14:43:28+00:00"
},
{
"path": "xbst_/V0_Electronic_Panel",
@@ -4369,7 +4379,7 @@
"printer_compatibility": [
"V0.2"
],
- "last_changed": "2024-01-08T16:38:25+00:00"
+ "last_changed": "2024-03-14T14:43:28+00:00"
},
{
"path": "xbst_/V0_M4_Mod",
@@ -4379,7 +4389,7 @@
"printer_compatibility": [
"V0.2"
],
- "last_changed": "2024-01-08T16:38:25+00:00"
+ "last_changed": "2024-03-14T14:43:28+00:00"
},
{
"path": "xbst_/V0_Picam",
@@ -4389,7 +4399,7 @@
"printer_compatibility": [
"V0.2"
],
- "last_changed": "2024-01-08T16:38:25+00:00"
+ "last_changed": "2024-03-14T14:43:28+00:00"
},
{
"path": "xbst_/V0_Screw_Front_Hinge_Mod",
@@ -4399,7 +4409,7 @@
"printer_compatibility": [
"V0.2"
],
- "last_changed": "2024-01-08T16:38:25+00:00"
+ "last_changed": "2024-03-14T14:43:28+00:00"
},
{
"path": "xbst_/V0_Skirt_Buttons",
@@ -4419,7 +4429,7 @@
"printer_compatibility": [
"V2.4"
],
- "last_changed": "2024-01-08T16:38:25+00:00"
+ "last_changed": "2024-03-14T14:43:28+00:00"
},
{
"path": "xbst_/V2.4_Skirt_Buttons",
@@ -4439,7 +4449,7 @@
"printer_compatibility": [
"V0.2"
],
- "last_changed": "2024-01-08T16:38:25+00:00"
+ "last_changed": "2024-03-14T14:43:28+00:00"
},
{
"path": "xceled/Single_Panel_Magnet_Mount",
diff --git a/printer_mods/techprolet/2020_aplic_cam_mount/.metadata.yml b/printer_mods/techprolet/2020_aplic_cam_mount/.metadata.yml
new file mode 100644
index 000000000..9827a25a8
--- /dev/null
+++ b/printer_mods/techprolet/2020_aplic_cam_mount/.metadata.yml
@@ -0,0 +1,28 @@
+---
+# The title of your mod. Choose a short and descriptive name
+title: 2020 Aplic Cam Mount
+# A short description of your mod. Try to describe your mod with 1-2 short sentences
+description: Aplic HD camera to the 2020 frame at bed level.
+# Mod version: Set this to 1 when you are submitting a new mod. When you make changes to your mod, you may increment this number
+mod_version: 1
+# You may add your discord username here so people can contact you about your mod
+discord_username: techprolet
+# The CAD files for your mod. Please provide them as a list.
+# Note that each mod must include at least one CAD file.
+cad:
+- aplic_cam_mount.scad
+# The parts of your mod, exported and oriented ready to be sliced. Please provide them as a list.
+# Note that each mod must include at least one STL or OBJ file.
+stl:
+- aplic_cam_mount_voron_2_4_300x300.stl
+# The image files provided with your mod. These may be instructions you use in your README.md file, or other additional pictures.
+# **Note that the first image specified here will be used as cover image on mods.vorondesign.com**
+# All paths are relative to this .metadata.yml file.
+images:
+- img/2020_aplic_cam_mount.jpg
+# Printer compatibility. Please specify all compatible printers as a list. The following values are accepted:
+# "V0", "V0.1", "V0.2", "V0.2r1", "V1", "V1.6", "V1.8", "V1.8r1", "V2", "V2.1", "V2.2", "V2.4", "V2.4r1", "V2.4r2", "VSW", "VT", "VTr1", "VL"
+# Please only specify printers that you have either tested your mod on yourself, or that someone else has tested for you. If you are unsure whether your
+# mod is compatible with a certain printer, don't list it here!
+printer_compatibility:
+- V2.4r2
\ No newline at end of file
diff --git a/printer_mods/techprolet/2020_aplic_cam_mount/README.md b/printer_mods/techprolet/2020_aplic_cam_mount/README.md
new file mode 100644
index 000000000..2261dba61
--- /dev/null
+++ b/printer_mods/techprolet/2020_aplic_cam_mount/README.md
@@ -0,0 +1,41 @@
+## 2020 Aplic Cam Mount
+
+
+**2020 Aplic Cam Mount** is a 3D printed part that is used to mount a cheapo *aplic hd camera* (or similar) to the 2020 frame at bed level. The mount is designed to be held in place with a M3 screw and a M3 nut. Additionaly, you need 4x M3 heat inserts, 4x M3 spacers and 4x M3x6 screws for mounting the camera on the mount (pun intended).
+
+
+You can also invert mount the camera under the gantry, which would work better for monitoring higher layers. *Photo courtesy of _tsimo_ V2.6592*
+
+
+### Files
+* `aplic_cam_mount_voron_2_4_300x300.stl` - The mount STL, angled for the Voron 2.4 300x300mm geometry.
+* `aplic_cam_mount_voron_2_4_300x300_shortened.stl` - Shortened version STL,for inverse mounting on a Voron 2.4 300x300mm gantry.
+* `aplic_cam_mount.scad` - The OpenSCAD file for the mount (you can modify the parameters for your own printer's geometry).
+
+### Parts
+The mount is designed to be used with the following parts:
+```
+- 1x 3d printed 2020 Aplic Cam Mount
+- 1x Aplic Webcam - 1920x1080P stripped from its plastic case
+- 1x M3x10 screw
+- 1x M3 2020 T-nut
+- 4x M3 heat inserts
+- 4x M3x4 spacers
+- 4x M3x6 screws
+```
+### Printing
+The mount is printed in the orientation that as is in the STL file. The mount should be printed with the recommended Voron settings (40% infill and 4 perimeters) in ABS/ASA. That said, I've printed mine in PETG and it still holds. No supports or mount needed.
+
+
+
+### Credits and license
+
+Copyright 2024, Pavlos Iliopoulos.
+
+ 2020 Aplic Cam Mount is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
+
+ 2020 Aplic Cam Mount is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along with this program. If not, see .
+
+The author does not hold any copyright or has any affiliation with aplic and/or its products.
diff --git a/printer_mods/techprolet/2020_aplic_cam_mount/aplic_cam_mount.scad b/printer_mods/techprolet/2020_aplic_cam_mount/aplic_cam_mount.scad
new file mode 100644
index 000000000..2bea89b90
--- /dev/null
+++ b/printer_mods/techprolet/2020_aplic_cam_mount/aplic_cam_mount.scad
@@ -0,0 +1,159 @@
+/*
+Copyright 2024, Pavlos Iliopoulos.
+
+ 2020 Aplic Cam Mount is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
+
+ 2020 Aplic Cam Mount is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along with this program. If not, see