rename abandoned_mods to orphaned_mods (#863)

* rename abandoned_mods to orphaned_mods

* add missing newline

.gitignore

@@ -1,3 +1,4 @@
 .DS_Store
 .DS_store
 .history
+.vscode

orphaned_mods/printer_mods/README.md

@@ -1,4 +1,4 @@
-# Abandoned Mods
+# Orphaned Mods
 
 This is a list of mods that are no longer being maintained by the original author. Mods make it into this folder if the Dev Team feels they are popular or important enough to remain in the repository even though the original author is not longer updating the mod.
 
@@ -10,8 +10,8 @@ For a mod to be included in this list, the following conditions need to be met:
 
 Alternately mod authors are welcome to create an issue in regards to their mod if they no longer want to maintain it.
 
-# Pull Requests against abandoned mods
-Pull requests can be generated against these mods by anyone, ignoring the normal requirement to get the approval of the original author. PRs against abandoned mods not made by the original author should only be merged with multiple reviewer approvals, and should generally be limited to bug fixes and maintenance patches.
+# Pull Requests against orphaned mods
+Pull requests can be generated against these mods by anyone, ignoring the normal requirement to get the approval of the original author. PRs against orphaned mods not made by the original author should only be merged with multiple reviewer approvals, and should generally be limited to bug fixes and maintenance patches.
 
 ---
 

printer_mods/Boingomw/Wago_mount/README.md

@@ -3,7 +3,7 @@ Wago 221 Lever Nuts are really cool, and easy to use (and not inexpensive).  The
 
 There are also very nice mounting brackets for them.  The one I based mine on was created by deepfriedheroin and is available here: [V2 Bed Wagos](../../deepfriedheroin/v2_bed_wagos)
 
-But, that mod assumes nothing else is going to be taking up that space.  I am going to also use the [purge bucket and brush mod](../../../abandoned_mods/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_%26_Nozzle_Scrubber), so I won't have enough area to take advantage of DeepFried's mount.  So I made a smaller one, that mounts flush to the same extrusion the Z-stop is on.
+But, that mod assumes nothing else is going to be taking up that space.  I am going to also use the [purge bucket and brush mod](../../../orphaned_mods/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_%26_Nozzle_Scrubber), so I won't have enough area to take advantage of DeepFried's mount.  So I made a smaller one, that mounts flush to the same extrusion the Z-stop is on.
 
 I also added features!  
 1. It has an indexing tab on the back so it only requires one M3x8 SHCS bolt (and matching T-nut) to mount, and the indexing tab does not extend the entire length, just in case you want to push the edge past the end of the extrusion a bit for added space.

printer_mods/Dr-Info/V2.4r2_Z-Drive_Motor_Tensioner_Mod_Rear_Skirts/README.md

@@ -1,7 +1,7 @@
 # V2.4 Rear Skirt Mod for Z-Drive Motor Tensioner Mod
 
 Credit for the Mod goes to Edward Yeeks for the orginal design and Skohls for updating the mod for the R2 changes.
-https://github.com/VoronDesign/VoronUsers/tree/master/abandoned_mods/printer_mods/edwardyeeks/V2.4_z_drive_motor_tensioner_mod
+https://github.com/VoronDesign/VoronUsers/tree/master/orphaned_mods/printer_mods/edwardyeeks/V2.4_z_drive_motor_tensioner_mod
 
 This mod enables the you to utilize the rear skirts, power and keystone, in your V2.4R2 while still being able to use the Motor Tensioner Mod.
 ***NOTE: heat set insert holes are in a new location so you will have to reposition your bottom panel clips and hinges.***

printer_mods/Slidr/PanzerBalls2.4/readme.md

@@ -16,7 +16,7 @@ How do i install Panzerballs?
     o german source:https://www.decathlon.de/p/squashballe-sb-990-2er-pack-zwei-gelbe-punkte/_/R-p-312192
   - 4x printed Panzerballs:
     o Use '01-Normal/[a]_PanzerBall_x4.stl' if you have not modded your z-Drive
-    o If you use edwardyeeks [V2.4_z_drive_tensioner_mod](../../../abandoned_mods/printer_mods/edwardyeeks/V2.4_z_drive_motor_tensioner_mod)
+    o If you use edwardyeeks [V2.4_z_drive_tensioner_mod](../../../orphaned_mods/printer_mods/edwardyeeks/V2.4_z_drive_motor_tensioner_mod)
     is also supported: install the Panzerballs from folder '02-Optional_z-Drive-Mod/*.stl'
 - Screws as Voron Spec build
 

printer_mods/edwardyeeks/Tridentified_V2.4_Power_Inlet/readme.md

@@ -5,7 +5,7 @@
 ### Trident style side plug skirts for V2.4 to suit Edwardyeeks z-drive tensioner mod
 ![Model.png](images/Model.png)
 
-**These skirts are only compatible with Edwardyeeks V2.4 z-drive Tensioner Mod [Found Here](../../../abandoned_mods/printer_mods/edwardyeeks/V2.4_z_drive_motor_tensioner_mod)**
+**These skirts are only compatible with Edwardyeeks V2.4 z-drive Tensioner Mod [Found Here](../../../orphaned_mods/printer_mods/edwardyeeks/V2.4_z_drive_motor_tensioner_mod)**
 
 ### **250:**