Generate VoronUsers printer_mods README.md [skip ci]

2023-12-20 16:59:12 +00:00 · 2023-12-20 16:59:12 +00:00 · 82af82009a
parent cfdb009ee9
commit 82af82009a
2 changed files with 132 additions and 132 deletions
--- a/printer_mods/README.md
+++ b/printer_mods/README.md
@ -20,21 +20,19 @@ contact the admins on Discord to have your mod moved to this folder.
 |  | [Thermistor holder zero](3dpandme/Thermistor_holder_zero) | Extended thermistor holder for Voron Zero | V0.2, VSW, VT | 2023-07-14 13:24:54 +0000 |
 | 3vilson | [V0.1_Skirt_Holes](3vilson/V0.1_Skirt_Holes) | Skirt with Access Holes from the bottom | V0.2 | 2023-07-13 14:30:27 +0000 |
 |  | [V0.1_Skirt_Inlet](3vilson/V0.1_Skirt_Inlet) | Skirt with C14 inlet + New feet to screw into | V0.2 | 2023-07-13 14:30:27 +0000 |
-| 42bios | [LED mount](42bios/LED_mount) | AngryLED - LED-mount for Lumentech LT3 profiles. | V2.4 | 2023-07-14 13:24:54 +0000 |
+| 42bios | [Corner panel clip w. cable](42bios/corner_panel_clip_cable) | Corner panel clip with an internal cable path. | V2.4 | 2023-07-13 14:30:27 +0000 |
 |  | [Corner panel clip w. cable](42bios/corner_panel_clip_cable) | Corner panel clip with an internal cable path. | V2.4 | 2023-07-13 14:30:27 +0000 |
 |  | [Exhaust filter housing - side...](42bios/exhaust_filter_housing_side) | Exhaust filter housing with the G1-8 "thread on the side. | V2.4 | 2023-07-13 14:30:27 +0000 |
 |  | [relay mount](42bios/relay_mount) | relay-mount for 2x 2 channel relay modules. | V2.4 | 2023-07-13 14:30:27 +0000 |
-| Akio | [Hidden cable routing z belt cover](Akio/cable_routing_z_belt_cover) | Z belt covers that allow hidden cable routing. | V2.4 | 2023-07-14 13:24:54 +0000 |
+| Akio | [Hidden cable routing z belt cover](Akio/cable_routing_z_belt_cover) | Z belt covers that allow hidden cable routing. | V2.4 | 2023-12-20 16:46:12 +0000 |
 | AlexanderT-Moss | [270 Clamping Hinges](AlexanderT-Moss/270-Clamping-Hinges) | Simple 270 degree hinges that clamp to the front panels instead of... | V2.4 | 2023-07-14 13:24:54 +0000 |
 | Andre | [Mini Afterburner ADXL345 Mount](Andre/Mini_Afterburner_ADXL345_Mount) | Mount for an AXDL345 on the Mini Afterburner | V0.2 | 2023-07-14 13:24:54 +0000 |
 |  | [Mini Afterburner Strain Relief](Andre/Mini_Afterburner_Strain_Relief) | A replacement strain relief for the Mini Afterburner toolhead | V0.2 | 2023-07-13 14:30:27 +0000 |
-|  | [Revo Nozzle Skirt](Andre/Revo_Nozzle_Skirt_Trident) | A Revo nozzle box hidden in a Trident skirt. | VT | 2023-07-14 13:24:54 +0000 |
+|  | [Revo Nozzle Skirt](Andre/Revo_Nozzle_Skirt_Trident) | A Revo nozzle box hidden in a Trident skirt. | VT | 2023-12-20 16:46:28 +0000 |
 |  | [V0 Neopixel Front Bed Mount](Andre/V0_Neopixel_Front_Bed_Mount) | A replacement Front Bed Mount with room for a neopixel or dotstar... | V0.2 | 2023-07-14 13:24:54 +0000 |
 | Backenfutter | [Mount for Electreeks Camera](Backenfutter/Mount_for_Electreeks_Camera) | This Mod is a simple "One Piece" mount for the popular Electreeks... | V2.4 | 2023-07-13 14:30:27 +0000 |
 | Badnoob | [AB-BN Afterburner mod (5015)](Badnoob/AB-BN) | Improved Afterburner with 5015 fan | V1.8, V2.4, VSW, VT | 2023-07-14 13:24:54 +0000 |
 |  | [AB-BN for Stock Afterburner (4020)](Badnoob/ABBN_for_Stock) | Improved Dragon and Rapido toolhead for stock Afterburner with 4020... | V1.8, V2.4, VSW, VT | 2023-07-13 14:30:27 +0000 |
 |  | [Precision AB Drive](Badnoob/Precision_AB_Drive) | Changes the gearing for the AB drives to improve both resolution... | V2.4 | 2023-07-14 13:24:54 +0000 |
 |  | [Rail Alignment](Badnoob/Rail_Alignment) | Tools and procedure to properly align the rails in 2.4 and Afterburner | V2.4 | 2023-07-13 14:30:27 +0000 |
 | Baltojikale | [LoudOwl aka Stabby](Baltojikale/LoudOwl_aka_Stabby) | Alternative dual 5015 part cooling fan toolhead for Afterburner | V1.8, V2.4, VSW | 2023-07-14 13:24:54 +0000 |
 | BladeScraper-Designs | [CornerPanel_SpoolHolder](BladeScraper-Designs/CornerPanel_SpoolHolder) | A better supported Spool Holder that mounts to a modified corner... | V0.2 | 2023-07-14 13:24:54 +0000 |
 |  | [Horizontal Spool Holder](BladeScraper-Designs/Horizontal-Spool-Holder) | Based on the stock holder but mounts to the horizontal extrusions. | V2.4 | 2023-07-13 14:30:27 +0000 |
@ -51,7 +49,6 @@ contact the admins on Discord to have your mod moved to this folder.
 | CannedBass | [PITFT50 45-degree mount](CannedBass/PITFT50_45_degree_mount) | Mount that puts the screen at a 45-degree angle for more vertical... | V2.4, VT | 2023-07-13 14:30:27 +0000 |
 |  | [Trident Bed Fans](CannedBass/Trident_Bed_Fans) | Bed fans for Trident | VT | 2023-07-13 14:30:27 +0000 |
 | Ch4rlesB | [V0 Handles Slim](Ch4rlesB/V0_Handles_Slim) | Simple and slim handles for the V0 | V0.2 | 2023-07-14 13:24:54 +0000 |
 | Chaoticlab | [Tool_free_tensioner](Chaoticlab/Tool_free_tensioner) | Tool-free tensioner for Z-Axis | V2.4 | 2023-07-13 14:30:27 +0000 |
 | ChenTheDesignMaker | [Z Belt Clip](ChenTheDesignMaker/Z_Belt_Clip) | Simple clip to keep extra Z belts clean and away from panels | V2.4 | 2023-07-14 13:24:54 +0000 |
 | D4rkCelerity | [Raspberry Pi Zero Bracket](D4rkCelerity/Raspberry_Pi_Zero_Bracket) | Modified version of Trident RPi bracket to fit the smaller RPi Zero | V0.2, V1.8, V2.4, VT | 2023-07-13 14:30:27 +0000 |
 | DC67 | [Plug Panel Mod for Schaffner...](DC67/plug_panel_schaffner) | A modified plug panel for the Power Entry Connector Schaffner... | V2.4 | 2023-07-14 13:24:54 +0000 |
@ -73,9 +70,9 @@ contact the admins on Discord to have your mod moved to this folder.
 | ElPoPo | [Removable Doors](ElPoPo/RemovableDoors) | New hinge to easily remove the door and have a wide opening V2.x | V2.4 | 2023-07-14 13:24:54 +0000 |
 | Electroleon | [U2C Mounting](Electroleon/U2C_Mounting) | Bigtreetech U2C CAN Interface mounting bracket | V0.2, V1.8, V2.4, VT | 2023-07-13 14:30:27 +0000 |
 | Ellis | [15x15 Drag Chain End](Ellis/15x15_Drag_Chain_End) | 15x15 drag chain end piece | V2.4 | 2023-07-13 14:30:27 +0000 |
-|  | [Badge Retractor Mount](Ellis/Badge_Retractor_Mount) | Extrusion mount for badge retractor to keep bowden tube out of the... | V2.4 | 2023-07-13 14:30:27 +0000 |
+|  | [Badge Retractor Mount](Ellis/Badge_Retractor_Mount) | Extrusion mount for badge retractor to keep bowden tube out of the... | V2.4 | 2023-12-20 16:46:28 +0000 |
 |  | [Bed Fans](Ellis/Bed_Fans) | Bed fan control macros and 5015 bed fan mounts | V2.4 | 2023-07-14 13:24:54 +0000 |
-|  | [Short Z Joints](Ellis/Short_Z_Joints) | Shorter Z joints for the v2.4 | V2.4 | 2023-07-13 14:30:27 +0000 |
+|  | [Short Z Joints](Ellis/Short_Z_Joints) | Shorter Z joints for the v2.4 | V2.4 | 2023-12-20 16:46:28 +0000 |
 |  | [Single MGN9H Carriage](Ellis/Single_MGN9H_Carriage) | Single MGN9H toolhead carriage with toolhead x endstop support (for... | V1.8, V2.4 | 2023-07-14 13:24:54 +0000 |
 | Empusas | [Mounts for BTT Filament Motion...](Empusas/BTT_Filament_Motion_Sensor_Mount) | Mounts for Big Tree Tech Smart Filament Motion Sensor | V0.2, V1.8, V2.4, VSW | 2023-07-14 13:24:54 +0000 |
 |  | [Power Skirt 2.x FN284-10-06](Empusas/PowerSkirt_FN284-10-06) | Power Skirt for Schaffner FN284-10-06 V2.x | V2.4 | 2023-07-14 13:24:54 +0000 |
@ -85,13 +82,13 @@ contact the admins on Discord to have your mod moved to this folder.
 |  | [Exhaust_cover](Fiction/Exhaust_cover) | Cover for exhaust cutout in back panel | V2.4, VT | 2023-07-14 13:24:54 +0000 |
 |  | [Exhaust_cover_SFS](Fiction/Exhaust_cover_SFS) | Exhaust cover and BTT Smart Filament Sensor mount | V2.4, VT | 2023-07-14 13:24:54 +0000 |
 |  | [LGX Lite toolhead PCB mount](Fiction/LGX_Lite_toolhead_PCB_mount) | Mount for Hartk's toolhead PCB(s) for LGX Lite | V1.8, V2.4, VSW, VT | 2023-07-13 14:30:27 +0000 |
-| FreeformFez | [V1.8 Filtered Power Inlet](FreeformFez/FilteredPower) | V1.6 Filtered Inlet and Rocker Switch for V1.8 | V1.8 | 2023-07-14 13:24:54 +0000 |
+| FreeformFez | [V1.8 Filtered Power Inlet](FreeformFez/FilteredPower) | V1.6 Filtered Inlet and Rocker Switch for V1.8 | V1.8 | 2023-12-20 16:46:28 +0000 |
 | GSL12 | [Pocketwatch Nema 17](GSL12/pocketwatch_nema17) | Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe... |  | 2023-07-13 14:30:27 +0000 |
 | GadgetAngel | [Bed Support Extrusions Alignment...](GadgetAngel/Bed_Support_Alignment_Tools) | The bed support alignment tools will assist in helping align the... | V2.4 | 2023-07-14 13:24:54 +0000 |
-|  | [Cricut Voron Logos](GadgetAngel/Cricut_Voron_Logos) | For any cutting machines or machines that rely on vector graphics... | V0.2, V2.4, VSW, VT | 2023-07-14 13:24:54 +0000 |
+|  | [Cricut Voron Logos](GadgetAngel/Cricut_Voron_Logos) | For any cutting machines or machines that rely on vector graphics... | V0.2, V2.4, VSW, VT | 2023-12-20 16:46:28 +0000 |
 | Galvanic | [Bowden Tube Guide](Galvanic/Bowden_Tube_Guide) | Bowden tube guide and CANBUS wire support | V1.8, V2.4, VT | 2023-07-14 13:24:54 +0000 |
 | GiulianoM | [Fly F407ZG Mount](GiulianoM/FlyF407ZG) | Mount for the Fly F407ZG: https://github.com/FLYmaker/FLYF407ZG | V2.4 | 2023-07-14 13:24:54 +0000 |
-| Gizzle | [Ender 3 and Ender 3 Pro...](Gizzle/ender-3_pro_switchwire) | Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics... | VSW | 2023-07-14 13:24:54 +0000 |
+| Gizzle | [Ender 3 and Ender 3 Pro...](Gizzle/ender-3_pro_switchwire) | Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics... | VSW | 2023-12-20 16:46:28 +0000 |
 | Hobson318 | [Belt Tension Wrench](Hobson318/Belt_Tension_Wrench) | Wrench for easier turning of the belt tension knobs on V0.1 | V0.2 | 2023-07-13 14:30:27 +0000 |
 |  | [Klipper Expander Mount](Hobson318/Klipper_Expander_Mount) | Mounting brackets for the klipper expander using vhb tape or... | V0.2, V1.8, V2.4, VSW, VT | 2023-07-13 14:30:27 +0000 |
 | Iakabos | [c920 Mount](Iakabos/C920_mount) | Slim mount for logitech c920 webcam | V1.8, V2.4 | 2023-07-13 14:30:27 +0000 |
@ -101,17 +98,17 @@ contact the admins on Discord to have your mod moved to this folder.
 | JNP | [Back Door](JNP/Back-Door) | Door for easy hardware access | V0.2 | 2023-07-14 13:24:54 +0000 |
 |  | [Deck Panel](JNP/Deck_Panel_Rear) | Covers the hotbed cables | V0.2 | 2023-07-13 14:30:27 +0000 |
 |  | [Drawer](JNP/Drawer) | Drawer in four different versions | V0.2 | 2023-07-14 13:24:54 +0000 |
-|  | [Front Door](JNP/Front-Door) | Door in a frame | V0.2 | 2023-07-14 13:24:54 +0000 |
+|  | [Front Door](JNP/Front-Door) | Door in a frame | V0.2 | 2023-12-20 16:46:28 +0000 |
-|  | [Hepa Filter](JNP/HEPA-Filter) | Filter case with fan´s | V0.2 | 2023-07-13 14:30:27 +0000 |
+|  | [Hepa Filter](JNP/HEPA-Filter) | Filter case with fan´s | V0.2 | 2023-12-20 16:46:28 +0000 |
 |  | [Mid Panel](JNP/Mid-Panel) | Panel for SKR1.4/1.4 or SKR E3 mini mount | V0.2 | 2023-07-14 13:24:54 +0000 |
-|  | [Neopixel Case](JNP/Neopixel-Y_Rails) | mounting for Neopixel strip with 8 LED´s | V0.2 | 2023-07-14 13:24:54 +0000 |
+|  | [Neopixel Case](JNP/Neopixel-Y_Rails) | mounting for Neopixel strip with 8 LED´s | V0.2 | 2023-12-20 16:46:28 +0000 |
-|  | [Side Panels](JNP/Side-Panels) | Panels with intergrated hinge | V0.2 | 2023-07-14 13:24:54 +0000 |
+|  | [Side Panels](JNP/Side-Panels) | Panels with intergrated hinge | V0.2 | 2023-12-20 16:46:28 +0000 |
 | Jasrags | [Feed slot with filament pass-...](Jasrags/sw_fee_slot_filament_passthrough) | A feed slot with a filament pass-through | VSW | 2023-07-13 14:30:27 +0000 |
 | JeremyRuhland | [V2.4 Plug Panel Generic Combo](JeremyRuhland/V2.4_Plug_Panel_Generic_Combo) | Skirt power panel for generic amazon plug/switch/fuse combo module,... | V2.4 | 2023-07-14 13:24:54 +0000 |
 | Jon | [1515 LED Mount](Jon/1515_led_mount) | Snap in 1515 Led mount for WS2812B | V0.2 | 2023-07-14 13:24:54 +0000 |
 |  | [Z Cover for v0.1](Jon/V0.1_Z_Cover) | A cover to stop things from dropping down the Z motor and... | V0.1 | 2023-07-14 13:24:54 +0000 |
 |  | [adxl345 skirt keystone](Jon/adxl345_skirt_keystone) | Skirt keystone for ADXL345 using Microfit 3.0 | V2.4 | 2023-07-13 14:30:27 +0000 |
-| JosAr | [Klicky Probe](JosAr/Klicky-Probe) | Microswitch based inductive probe replacement | V0.2, V1.8, V2.4, VT | 2023-07-14 13:24:54 +0000 |
+| JosAr | [Klicky Probe](JosAr/Klicky-Probe) | Microswitch based inductive probe replacement | V0.2, V1.8, V2.4, VT | 2023-12-20 16:46:28 +0000 |
 | KenadyDwag44 | [Switchwire Lightbar](KenadyDwag44/sw_lightbar) | A LED lightbar for switchwire | VSW | 2023-07-13 14:30:27 +0000 |
 | KevinAkaSam | [VEFACH](KevinAkaSam/VEFACH) | Voron Exhaust Filter Inserts for Activated Coal + Hepa | V2.4, VT | 2023-07-14 13:24:54 +0000 |
 | KiloQubit | [V0 Reverse Bowden Mount](KiloQubit/V0_reverse_bowden_mount) | V0 reverse bowden mount | V0.2 | 2023-07-14 13:24:54 +0000 |
@ -124,7 +121,7 @@ contact the admins on Discord to have your mod moved to this folder.
 | Kosh42EFG | [Kirigami bed front](Kosh42EFG/kirigami_bed_front) | Printed bed front for kirigami folded metal bed mount with Voron logo. | V0.2 | 2023-07-13 14:30:27 +0000 |
 | Kruppes | [Encosed Bottom](Kruppes/Closed_Bottom) | Modified printed parts and panel to fully enclose V0. | V0.2 | 2023-07-14 13:24:54 +0000 |
 |  | [V0 Printed Deck with inserts](Kruppes/Deck_Panel_inserts_logo) | Electronics Deck Panel using brass heat inserts. Optional with... | V0.2 | 2023-07-13 14:30:27 +0000 |
-|  | [Belt Tension Meter](Kruppes/Tension_Meter) | Print in place tension meter to easily tighten multiple belts to... | V0.2, V1.8, V2.4, VSW | 2023-07-14 13:24:54 +0000 |
+|  | [Belt Tension Meter](Kruppes/Tension_Meter) | Print in place tension meter to easily tighten multiple belts to... | V0.2, V1.8, V2.4, VSW | 2023-12-20 16:46:28 +0000 |
 | Kyleisah | [CableGator Cable Comb](Kyleisah/CableGator) | A cable comb for simplifying and tidying wire harnesses for... | V0.2, V1.8, V2.4, VSW, VT | 2023-07-14 13:24:54 +0000 |
 | LJ | [Scrubby](LJ/Scrubby) | Easy to use filament dust filter | V0.2, V1.8, V2.4, VSW, VT | 2023-07-14 13:24:54 +0000 |
 | Le0n | [Magnetic panels with Magnet Inserts](Le0n/Magnetic_Panels_with_Magnet_Inserts) | Magnetic panel mounts with magnets inserted into frame slots. | V1.8, V2.4, VT | 2023-07-14 13:24:54 +0000 |
@ -134,12 +131,12 @@ contact the admins on Discord to have your mod moved to this folder.
 |  | [Strain Relief w/ 10 Pin Microfit](LoCoCNC/Strain_Relief_w_Microfit) | Strain Relief with 10 pin Microfit connector | V0.2 | 2023-07-13 14:30:27 +0000 |
 |  | [SSR Mounting Strap](LoCoCNC/ssr_strap) | Mounting Strap for SSR on 1515 Extrusions | V0.2 | 2023-07-14 13:24:54 +0000 |
 |  | [V2.4 Bed Wiring Grommet](LoCoCNC/wire_grommets) | Safely capture your bed wires thru the bottom panel | V2.4 | 2023-07-13 14:30:27 +0000 |
-| LoganFraser | [ComboInlet](LoganFraser/ComboInlet) | Skirt pieces for Trident, 2.4 and 2.4r2 for combo inlets in 2 sizes. | V2.4, VT | 2023-07-14 13:24:54 +0000 |
+| LoganFraser | [ComboInlet](LoganFraser/ComboInlet) | Skirt pieces for Trident, 2.4 and 2.4r2 for combo inlets in 2 sizes. | V2.4, VT | 2023-12-20 16:46:28 +0000 |
 |  | [HorseshoeSpoolHolder](LoganFraser/HorseshoeSpoolHolder) | Horseshoe Spool Holder - mounts internally for Trident, or... | V0.2, V1.8, V2.4, VT | 2023-07-14 13:24:54 +0000 |
 |  | [PiPlate](LoganFraser/PiPlate) | PiPlate - Raspberry Pi3,4 mounting plate and Skirt Mod for... | V2.4, VT | 2023-07-14 13:24:54 +0000 |
 |  | [Trident Inverted Electronics](LoganFraser/TridentInvertedElectronics) | Flip the Trident electronics bay for top access. | VT | 2023-07-13 14:30:27 +0000 |
 |  | [WagoMounts](LoganFraser/WagoMounts) | Wago Mounts for Din Rail or 2020 Extrusion mounting. | V2.4, VSW, VT | 2023-07-14 13:24:54 +0000 |
-| Long | [Mantis Dual 5015 Toolhead](Long/Mantis_Dual_5015) | MGN12 Dual 5015 Toolhead for 2.4 & 1.8 | V1.8, V2.4 | 2023-07-14 13:24:54 +0000 |
+| Long | [Mantis Dual 5015 Toolhead](Long/Mantis_Dual_5015) | MGN12 Dual 5015 Toolhead for 2.4 & 1.8 | V1.8, V2.4 | 2023-12-20 16:46:28 +0000 |
 | Lukas | [SSD1306 Case Front Cover](Lukas/SSD1306_Case_Front_Cover) | SSD1306 Mount replacement for Mini12864 | V2.4, VT | 2023-07-14 13:24:54 +0000 |
 | MCMBen | [Voron0 Block & Tackle Z Belt](MCMBen/Voron0_Block_and_Tackle_Z_Belt) | A block & tackle belted Z solution using NEMA14. Ratios from 5:1 to... | V0.2 | 2023-07-13 14:30:27 +0000 |
 | MSA | [Belt tension helper](MSA/V0-Belt-tension-helper) | Belt tension helper for V0.1 | V0.2 | 2023-07-14 13:24:54 +0000 |
@ -147,13 +144,13 @@ contact the admins on Discord to have your mod moved to this folder.
 | Mac10goesBRRRT | [PiTFT Mount](Mac10goesBRRRT/BTT_PiTFT) | Mount for the BTT PiTFT Touchscreen | V2.4, VT | 2023-07-13 14:30:27 +0000 |
 | Majarspeed | [Hartk board mount galileo](Majarspeed/Hartk_Mount_Galileo) | It hangs stuff on your tool | V2.4 | 2023-07-14 13:24:54 +0000 |
 | MakeALeft | [Switchwire Clean Center Grill](MakeALeft/Switchwire_Front_Grill) | Removed magnet holders on center panel for cleaner look |  | 2023-07-13 14:30:27 +0000 |
-| MasturMynd | [Stealth Zero](MasturMynd/Stealth_Zero) | A low poly gantry with front tensioners and optional front mounted... | V0.2 | 2023-07-14 13:24:54 +0000 |
+| MasturMynd | [Stealth Zero](MasturMynd/V0.1-Stealth_Zero) | A low poly gantry with front tensioners and optional front mounted... | V0.1 | 2023-12-20 16:56:48 +0000 |
 |  | [2-Piece Z Tensioners](MasturMynd/V2-2-Piece_Z_Tensioners) | Splits the tensioners into two pieces, allowing the tensioner to be... | V2 | 2023-12-20 16:56:48 +0000 |
 | MathematicalPotato | [V0.1 Belted Z Drive](MathematicalPotato/v0.1_belted_z_drive) | Conversion to a belted Z axis for the V0.1 adapted from... | V0.2 | 2023-07-14 13:24:54 +0000 |
 | Maverick | [MiniSB_LGXL](Maverick/MiniSB_LGX_Lite) | A Bondtech LGX Lite variant of the MiniSB | V0.2, V1.8, V2.4, VSW, VT | 2023-07-13 14:30:27 +0000 |
 |  | [MiniSB_Rapido](Maverick/MiniSB_Rapido) | Modified MiniSB to use a Rapido hotend | V0.2, V1.8, V2.4, VSW, VT | 2023-07-13 14:30:27 +0000 |
 |  | [MiniSB_Sharkfin](Maverick/MiniSB_Sharkfin) | Modified MiniSB to use a Sharkfin Extruder | V0.2, V1.8, V2.4, VSW, VT | 2023-07-14 13:24:54 +0000 |
-|  | [V0.2 Handles](Maverick/V0.2_Handles) | Add handles to the extrusion tophat | V0.2 | 2023-07-14 13:24:54 +0000 |
+|  | [V0.2 Stealth Skirts](Maverick/V0.2_Stealth_Skirts) | Juiced up skirts for the V0.2 | V0.2 | 2023-12-20 16:46:12 +0000 |
 |  | [V0.2 Stealth Skirts](Maverick/V0.2_Stealth_Skirts) | Juiced up skirts for the V0.2 | V0.2 | 2023-07-14 13:24:54 +0000 |
 | Mckurt | [Switchwire Y Belt Tensioner](Mckurt/Switchwire_Y_Belt_Tensioner) | Switchwie Y axis Belt Tensioner | VSW | 2023-07-13 14:30:27 +0000 |
 | Mellow | [V0 Fly-Gemini](Mellow/V0_Fly-Gemini) | Fly-Gemini adapted model for V0 | V0.2 | 2023-07-13 14:30:27 +0000 |
 | MikesMods | [LGX mount for V0.1 with 2nd X rail](MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail) | V0.1 mod for mounting Bondtech LGX extruder with addition of 2nd X... | V0.2 | 2023-07-13 14:30:27 +0000 |
@ -191,7 +188,7 @@ contact the admins on Discord to have your mod moved to this folder.
 | Slidr | [PanzerBalls 2.4](Slidr/PanzerBalls2.4) | Squash Ball Feet for V2.4 | V2.4 | 2023-07-14 13:24:54 +0000 |
 |  | [PanzerChain 2.4](Slidr/PanzerChain2.4) | Energychain for V2.4 | V2.4 | 2023-07-13 14:30:27 +0000 |
 | Spaghetti-Bolognese | [LCD Case Mod](Spaghetti-Bolognese/LCD_case_mod) | Improvements to the V2.4 mini12864 LCD case inc E-stop button cover | V2.4 | 2023-07-14 13:24:54 +0000 |
-|  | [Simplified Z Drive Motor Mount](Spaghetti-Bolognese/Z_drive_motor_mount) | Z drive motor mount bracket mod to improve pulley to belt alignment | V2.4 | 2023-07-14 13:24:54 +0000 |
+|  | [Simplified Z Drive Motor Mount](Spaghetti-Bolognese/Z_drive_motor_mount) | Z drive motor mount bracket mod to improve pulley to belt alignment | V2.4 | 2023-12-20 16:46:28 +0000 |
 | StvPtrsn | [Skirts for a 320mm Build](StvPtrsn/320mm_Build) | Skirts for a 320mm build | V2.4 | 2023-07-14 13:24:54 +0000 |
 |  | [Keystone Jack for Filtered Mains...](StvPtrsn/Keystone_Jack_Filtered_Mains_Panel) | Add a keystone jack to your filtered mains plug panel | V2.4 | 2023-07-13 14:30:27 +0000 |
 |  | [Parts_Jigs and Mods](StvPtrsn/Parts_Jigs_and_Mods) | Parts, Jigs and modifications I use for my builds | V0.2, V1.8, V2.4, VSW, VT | 2023-07-13 14:30:27 +0000 |
@ -204,7 +201,7 @@ contact the admins on Discord to have your mod moved to this folder.
 |  | [Raspberry in plug panel](Tircown/Raspberry_plug_panel) | Raspberry mount vertically in the plug panel, allow easy access to... | V2.4 | 2023-07-14 13:24:54 +0000 |
 |  | [V0.1 Skirt buttons](Tircown/V01_skirt_buttons) | Buttons for V0.1 spec skirts | V0.2 | 2023-07-14 13:24:54 +0000 |
 | Triano | [Ender 3 Pro or V2 to Switchwire Mod](Triano/Ender_3Pro_Switchwire) | Convesion of an Ender 3 Pro or V2 to a Switchwire | VSW | 2023-07-14 13:24:54 +0000 |
-| Ultrawaffles | [Ender 3 to SW conversion](Ultrawaffles/Ender_3_to_SW) | A conversion mod for the ender 3 to switchwire. Designed to allow... | VSW | 2023-07-13 14:30:27 +0000 |
+| Ultrawaffles | [Ender 3 to SW conversion](Ultrawaffles/Ender_3_to_SW) | A conversion mod for the ender 3 to switchwire. Designed to allow... | VSW | 2023-12-20 16:46:28 +0000 |
 | VinnyCordeiro | [RGB LED grid for Stealthburner](VinnyCordeiro/RGB_LED_grid_for_SB) | A small RGB LED grid for Stealthburner's logo | V1.8, V2.4, VSW, VT | 2023-07-13 14:30:27 +0000 |
 | Weaslus | [Electronics Bay and Enclosure...](Weaslus/Electronics-Bay-Seperator) | Better enclose chamber and keep heat from electronics | V0.2 | 2023-07-13 14:30:27 +0000 |
 | ZZP8202 | [Pull-out electrical store](ZZP8202/Pull-out_electrical_store) | Voron 2.4 Pull-out electrical store（350mm only） | V2.4 | 2023-07-14 13:24:54 +0000 |
@ -223,8 +220,8 @@ contact the admins on Discord to have your mod moved to this folder.
 |  | [Filament Runout Sensor](al3ph/filament_runout) | A simple filament runout sensor | V0.2, V1.8, V2.4, VSW | 2023-07-13 14:30:27 +0000 |
 |  | [LED Mount](al3ph/led_mount) | A mount for 10mm LED WS2812 strips | V0.2 | 2023-07-13 14:30:27 +0000 |
 |  | [PL05 Sensor Mount](al3ph/pl05_mount) | A mount PL05 inductive sensor | V0.2 | 2023-07-13 14:30:27 +0000 |
-| alanho | [BTT PITFT50 v2 Mount](alanho/BTT_PITFT50_v2_Mount) | A mount for the BTT PITFT50 v2 Touch Display | V2.4 | 2023-07-15 11:51:22 +0000 |
+| alanho | [BTT PITFT50 v2 Mount](alanho/BTT_PITFT50_v2_Mount) | A mount for the BTT PITFT50 v2 Touch Display | V2.4 | 2023-12-20 16:46:12 +0000 |
-| albert | [IKEA Dioder Led Mount](albert/IKEA_Dioder_Led_Mount) | A mount for the IKEA Dioder LED strip | V2.4 | 2023-07-13 14:30:27 +0000 |
+| albert | [IKEA Dioder Led Mount](albert/IKEA_Dioder_Led_Mount) | A mount for the IKEA Dioder LED strip | V2.4 | 2023-12-20 16:46:28 +0000 |
 | antoinecellerier | [DS18B20 Sensor Mount](antoinecellerier/ds18b20-sensor-mount) | DS18B20 temperature sensor mount | V0.2 | 2023-07-15 11:51:22 +0000 |
 | ardichoke | [V0 Long Thumb Nut](ardichoke/v0-long-thumb-nut) | Taller thumb nuts for V0 bed | V0.2 | 2023-07-15 11:51:22 +0000 |
 | arkeet | [Dial test indicator mount](arkeet/dti-mount) | A toolhead mount for a dial test indicator, where the tip is... | V1.8, V2.4 | 2023-07-13 14:30:27 +0000 |
@ -235,7 +232,7 @@ contact the admins on Discord to have your mod moved to this folder.
 | beaugalbraith | [Nova Printhead](beaugalbraith/Nova_Printhead) | Use Nova Hotend with Afterburner | V2.4 | 2023-07-13 14:30:27 +0000 |
 | bobbleheed | [Filament Runout Sensor](bobbleheed/Filament_Runout) | Filament runout sensor that replaces the stock bowden retainer | V1.8, V2.4, VT | 2023-07-15 11:51:22 +0000 |
 |  | [Magnetic Panels](bobbleheed/Magnetic_Panels) | Magnetic clips to allow for easy removal and installation of panels | V2.4 | 2023-07-13 14:30:27 +0000 |
-| btp | [Galileo chain mount (befenybay)](btp/Galileo_Switchwire_Chain_Mount) | Modified chain mount position to cater for difference with Galileo... | VSW | 2023-07-13 14:30:27 +0000 |
+| btp | [Galileo chain mount (befenybay)](btp/Galileo_Switchwire_Chain_Mount) | Modified chain mount position to cater for difference with Galileo... | VSW | 2023-12-20 16:46:28 +0000 |
 | buzzdalf | [v1.8/2.4 Afterburner connector...](buzzdalf/connector_cover) | v1.8/2.4 Connector cover for 42STH20-1004AS | V1.8, V2.4 | 2023-07-15 11:51:22 +0000 |
 |  | [Ender 3 Switchwire Taller Z Mod](buzzdalf/ender_switchwire_taller_z) | Taller Z Mod | VSW | 2023-07-15 11:51:22 +0000 |
 |  | [Ender 3 Switchwire Y Tensioner Mod](buzzdalf/ytension) | Y Tension Mod | VSW | 2023-07-15 11:51:22 +0000 |
@ -262,14 +259,14 @@ contact the admins on Discord to have your mod moved to this folder.
 | davidauvergne | [Center_cable_management_duct](davidauvergne/Center_cable_management_duct) | Mod for a centered cable management | V2.4 | 2023-07-15 11:51:22 +0000 |
 | dePrintinator | [HEPA Exhaust](dePrintinator/HEPA_Filter_Exhaust) | HEPA filter chamber exhaust replacement. | V1.8, V2.4, VT | 2023-07-15 11:51:22 +0000 |
 | deepfriedheroin | [v0 Wago Bed Mounts](deepfriedheroin/v0_bed_wagos) | Easy to install Wago mounts for the v0 | V0.2 | 2023-07-13 14:30:27 +0000 |
-|  | [v0 Power Wagos](deepfriedheroin/v0_power_wagos) | Easy to install Wago mounts for v0 mains | V0.2 | 2023-07-15 11:51:22 +0000 |
+|  | [v0 Power Wagos](deepfriedheroin/v0_power_wagos) | Easy to install Wago mounts for v0 mains | V0.2 | 2023-12-20 16:46:28 +0000 |
 |  | [V2 Bed Wagos](deepfriedheroin/v2_bed_wagos) | Wire management for the v2 bed | V2.4 | 2023-07-13 14:30:27 +0000 |
 | doubletrouble | [V0 Skirt Mod](doubletrouble/V0_Skirt_Mod) | V0 Skirt Mod | V0.2 | 2023-07-13 14:30:27 +0000 |
 | eamars | [Stealthburner (RC1) Dragon...](eamars/stealthburner_crazy_dragon_toolhead) | The Stealthburner toolhead mount for Mellow Crazy, TriangleLab... | V1.8, V2.4, VSW, VT | 2023-07-15 11:51:22 +0000 |
 | eddie | [LED Bar Clip](eddie/LED_Bar_Clip) | Modular LED Clip for mounting LED Strip to 2020 Extrusions | V1.8, V2.4, VT | 2023-07-13 14:30:27 +0000 |
-|  | [V1.8 12mm Z Mod](eddie/V1.8_12mm_Z_Mod) | Add V1.8 option for 12mm Z rods | V1.8 | 2023-07-15 11:51:22 +0000 |
+|  | [V1.8 12mm Z Mod](eddie/V1.8_12mm_Z_Mod) | Add V1.8 option for 12mm Z rods | V1.8 | 2023-12-20 16:46:28 +0000 |
 | edwardyeeks | [Tridentified V2.4 Power Inlet](edwardyeeks/Tridentified_V2.4_Power_Inlet) | Trident style side power inlet for V2.4 using Z Drive Motor... | V2.4 | 2023-07-13 14:30:27 +0000 |
-| elcrni | [Trident Internal Spool Holder](elcrni/Trident_Internal_Spool_Holder) | Internal spool holder for 300 and 350 Tridents. Supports full size... | VT | 2023-07-15 11:51:22 +0000 |
+| elcrni | [Trident Internal Spool Holder](elcrni/Trident_Internal_Spool_Holder) | Internal spool holder for 300 and 350 Tridents. Supports full size... | VT | 2023-12-20 16:46:28 +0000 |
 |  | [V.24/Trident Spool Holder](elcrni/V2.4-Trident-Spool-Holders) | Spool holder that mounts on top for "too close to the wall" printers | V1.8, V2.4, VT | 2023-07-13 14:30:27 +0000 |
 | evandepol | [Crydom GN Terminal Guard](evandepol/Crydom-GN-Guard) | A simple safety guard for the terminals on a Crydom GN SSR | V2.4 | 2023-07-15 11:51:22 +0000 |
 |  | [Voron 2.4 cable clamps](evandepol/Voron2.4-Cable-clamps) | A set of 2020-mounted cable guards to organize and dress the wiring... | V2.4 | 2023-07-15 11:51:22 +0000 |
@ -277,6 +274,7 @@ contact the admins on Discord to have your mod moved to this folder.
 |  | [Magnetic Exhaust Grill Cover](falo/magnetic_grill_cover) | A magnetic cover to seal the filtered exhaust | V2.4 | 2023-07-15 11:51:22 +0000 |
 |  | [Toolhead PCB to CAN Mount Adaptor](falo/toolhead_pcb_to_can) | A mount to enable side mounting of a CAN board (Huvud/SHT42) in... | V1.8, V2.4, VSW, VT | 2023-07-13 14:30:27 +0000 |
 | filotto78 | [6mm slot cover](filotto78/6mm_slot_cover) | Simple cover for extrusion with 6mm slot width | V2.4 | 2023-07-13 14:30:27 +0000 |
 | frankaf | [Euclid Probe Carriage](frankaf/mgn12-euclid) | A MGN-12 carriage with an inset mount for a Euclid Probe | V1.8, V2.4, VT | 2023-12-20 16:26:57 +0000 |
 | gamebofh | [Laser cut door panels](gamebofh/door-panels) | Files to allow you to create laser cut door panels with some... | VSW | 2023-07-15 11:51:22 +0000 |
 | gauravmm | [Crazy Mozzie HF toolhead SB+CW2](gauravmm/crazy_mozzie_cw2) | Toolhead for Crazy Mozzie HF, compatible with Stealthburner and... | V1.8, V2.4, VSW, VT | 2023-07-15 11:51:22 +0000 |
 | gen2eng | [Switchwire LED wire pass through](gen2eng/z_carriage_stop_pass_through) | Z Carriage Stop modification that makes pass through of wires for... | VSW | 2023-07-15 11:51:22 +0000 |
@ -287,12 +285,12 @@ contact the admins on Discord to have your mod moved to this folder.
 |  | [V0.1 Trident skirt remix with...](golas/v0-trident-skirt-mix) | Trident style v0.1 skirt mix with 12864 Mini Lcd on front or plain... | V0.2 | 2023-07-15 11:51:22 +0000 |
 | hartk1213 | [Voron0.2 2.8 Waveshare Display](hartk1213/Voron0.2_2.8_WaveshareDisplay) | 2.8 Waveshare display for V0.2 | V0.2 | 2023-07-15 11:51:22 +0000 |
 |  | [Voron0.2 Rear Keystone Skirt](hartk1213/Voron0.2_Rear_Keystone_Skirt) | Added keystone slot on rear skirt for V0.2 | V0.2 | 2023-07-13 14:30:27 +0000 |
-|  | [Voron0 C14Inlet](hartk1213/Voron0_C14Inlet) | Added a new Power inlet that uses a Fused C14 plug and switch that... | V0.1 | 2023-07-15 11:51:22 +0000 |
+|  | [Voron0 C14Inlet](hartk1213/Voron0_C14Inlet) | Added a new Power inlet that uses a Fused C14 plug and switch that... | V0.1 | 2023-12-20 16:46:28 +0000 |
 |  | [Voron0 ExtendedLegs](hartk1213/Voron0_ExtendedLegs) | New extended legs to raise the printer up a tiny bit more | V0.1 | 2023-07-15 11:51:22 +0000 |
 |  | [Voron0 ExtrusionSkirt](hartk1213/Voron0_ExtrusionSkirt) | Created a new skirt design that uses 50mm extrusions as legs and it... | V0.1 | 2023-07-15 11:51:22 +0000 |
 |  | [Voron0 Hinged Top Hat](hartk1213/Voron0_Hinged_Top_Hat) | Created a new hinged top hat design for the V0 so it can fold away... | V0.1 | 2023-07-15 11:51:22 +0000 |
 |  | [Voron0 MGN9C X Axis](hartk1213/Voron0_MGN9C_X_Axis) | This mod, replaces the stock MGN7H for MGN9C on the V0 | V0.1 | 2023-07-15 11:51:22 +0000 |
-|  | [Voron0 deck panel](hartk1213/Voron0_deck_panel_with_logo_and_VORON0) | Used @Kruppes blank deck panel to add the logo as well as the name... | V0.1 | 2023-07-15 11:51:22 +0000 |
+|  | [Voron0 deck panel](hartk1213/Voron0_deck_panel_with_logo_and_VORON0) | Used @Kruppes blank deck panel to add the logo as well as the name... | V0.1 | 2023-12-20 16:46:28 +0000 |
 |  | [Voron0 display dualcolor](hartk1213/Voron0_display_dualcolor) | Added a dual color file for the Voron Display Front housing | V0.1 | 2023-07-15 11:51:22 +0000 |
 |  | [Voron2.4 GE5C](hartk1213/Voron2.4_GE5C) | This mod replaces the stack of printed z joints with a metal... | V2.4 | 2023-07-15 11:51:22 +0000 |
 |  | [Voron2.4 SexBolt ZEndstop](hartk1213/Voron2.4_SexBolt_ZEndstop) | This mod replaces stock V2 Z endstop with a different style | V2.4, VT | 2023-07-15 11:51:22 +0000 |
@ -302,7 +300,7 @@ contact the admins on Discord to have your mod moved to this folder.
 |  | [Plug Panel Mod for Generic...](henrikssn/plug_panel_generic) | v2.4 plug panel for generic unfiltered modules with 66mm x 27mm... | V2.4 | 2023-07-13 14:30:27 +0000 |
 | hergtoler | [Exhaust Housing for 120mm Fan...](hergtoler/exhaust_120mm_duct) | v2.4 Exhaust Housing for 120mm Fan and 4in Duct | V2.4 | 2023-07-15 11:51:22 +0000 |
 | hernsl | [Bottom Panel Mag Clip](hernsl/bottom_panel_mag_clip) | v2.4 magnetic clips to retain bottom panel | V2.4 | 2023-07-15 11:51:22 +0000 |
-| hhammarstrand | [Afterburner connector cover for...](hhammarstrand/afterburner_connector_cover_42STH20-1004AS) | Connector cover for 42STH20-1004AS | VSW | 2023-07-13 14:30:27 +0000 |
+| hhammarstrand | [Afterburner connector cover for...](hhammarstrand/afterburner_connector_cover_42STH20-1004AS) | Connector cover for 42STH20-1004AS | VSW | 2023-12-20 16:46:28 +0000 |
 | hijax_pl | [Corner panel clip](hijax_pl/corner_panel_clip) | V2 panel corner frames using 3-way L brackets in the corners | V2.4 | 2023-07-13 14:30:27 +0000 |
 |  | [Din Rail mount](hijax_pl/din_rail_mount) | Adapter to attach DIN Rail to 2020 extrusion. | V2.4 | 2023-07-13 14:30:27 +0000 |
 |  | [Controler Board adapters](hijax_pl/ender_compatible_controller_mount) | DIN (rotated) and legacy adapters for boards like SKR mini E3. | V2.4 | 2023-07-13 14:30:27 +0000 |
@ -310,6 +308,7 @@ contact the admins on Discord to have your mod moved to this folder.
 | hymness1 | [10x11mm chain VSW](hymness1/10x11mm_chain_VSW) | Printable and openable 10x11mm chain | V0.2, VSW | 2023-07-13 14:30:27 +0000 |
 |  | [Quickdraw probe Voron Switchwire](hymness1/Quickdraw_probe_Voron_Switchwire) | Detachable magnetic probe with docking system for VSW | VSW | 2023-07-15 11:51:22 +0000 |
 | iblue | [V0.1 Tophat Extractor](iblue/TophatExtractor) | Tophat Extractor for the Voron V0.1 with activated charcoal and... | V0.2 | 2023-07-13 14:30:27 +0000 |
 | jangrewe | [Bitter USB Cam](jangrewe/Bitter_USB_Cam) | Modification of the "Angry Cam USB v2.0" webcam mount for 1515... | V0 | 2023-12-20 16:46:12 +0000 |
 | jappaj | [V0.1 FanSaver](jappaj/FanSaver) | A printable fix for overheating V0.1 blower fans | V0.2 | 2023-07-15 11:51:22 +0000 |
 | jasonc | [V2.4 Z-Idler Shoulder Bolt Mod](jasonc/Z_Idler_Shoulder_Bolt) | Modification to the idler carriers to accept a 25mm shoulder bolt.... | V2.4 | 2023-07-15 11:51:22 +0000 |
 | jatson | [Plug panel mod for Schurter...](jatson/plug_panel_schurter) | A modified plug panel for Voron 2.4r1 with Schurter CD44.1101.151... | V2.4 | 2023-07-13 14:30:27 +0000 |
@ -321,7 +320,6 @@ contact the admins on Discord to have your mod moved to this folder.
 | jgehrig | [V0 LCD Touchscreen Skirt](jgehrig/v0_lcdskirt) | 3.2" LCD Touch Screen Skirt | V0.2 | 2023-07-15 11:51:22 +0000 |
 | johanncc | [Raspberry Pi Camera Mount](johanncc/Raspberry_Pi_Camera_Mount) | Low profile raspberry pi camera mount | V0.2 | 2023-07-15 11:51:22 +0000 |
 | joposter | [V0 Clippable LED Caselight](joposter/v0_clippable_ledmounts) | LED Case light for the V0 that clips into the extrusions | V0.2 | 2023-07-15 11:51:22 +0000 |
 | kageurufu | [Euclid Probe Carriage](kageurufu/mgn12-euclid) | A MGN-12 carriage with an inset mount for a Euclid Probe | V1.8, V2.4, VT | 2023-07-13 14:30:27 +0000 |
 | khay | [Fan for V2-200mm²](khay/V2-200_4020_Electronics_Fan) | Middle Skirt for V2-200mm² Electronics Compartment | V2.4 | 2023-07-15 11:51:22 +0000 |
 |  | [3x Keystone PlugPanel](khay/V2_3x_Keystone_Plugpanel) | PlugPanel with Options for 3 Keystones | V2.4 | 2023-07-15 11:51:22 +0000 |
 |  | [V0 Micro Backplate](khay/micro_backplate) | Minimalistic backplate for cooler motors and electronics | V0.2 | 2023-07-15 11:51:22 +0000 |
@ -336,32 +334,34 @@ contact the admins on Discord to have your mod moved to this folder.
 | mikepthomas | [MKS Mosfet Mount](mikepthomas/MKS_Mosfet_Mount) | MKS Mosfet Mount based of the Trident Raspberry Pi Mount. | V1.8, V2.4, VT | 2023-07-15 11:51:22 +0000 |
 | mjoaris | [10x11 Cable Chain Endcaps](mjoaris/10x11_Cable_Chain_Endcaps) | Printable Endcaps for 10x11 Cable Chains | V1.8, V2.4 | 2023-07-15 11:51:22 +0000 |
 |  | [Mini12864 LCD Mount](mjoaris/Mini12864_LCD_Mount_for_V2.4) | Swiveling case for the Fysetc Mini12864 LCD | V2.4 | 2023-07-15 11:51:22 +0000 |
-| mosher | [Door hinges with M3 screws shafts](mosher/m3_door_hinges) | Simple mod of print in place door hinges, which uses m3 screws as... | V2.4 | 2023-07-13 14:30:27 +0000 |
+| mosher | [Door hinges with M3 screws shafts](mosher/m3_door_hinges) | Simple mod of print in place door hinges, which uses m3 screws as... | V2.4 | 2023-12-20 16:46:28 +0000 |
 | mpfl | [V0.1 OLED-skirt](mpfl/V0.1_skirt_OLED) | V0.1 skirt with 0.96" OLED | V0.2 | 2023-07-13 14:30:27 +0000 |
 | muradir | [Zodiac BMO Stealthburner Toolhead](muradir/Zodiac_BMO_Stealthburner_Toolhead) | A Stealthburner toolhead for the Zodiac BMO Hotend, based on the... | V1.8, V2.4, VSW, VT | 2023-07-13 14:30:27 +0000 |
 | natewalck | [V1.8 Jigs](natewalck/v1.8_Jigs) | Jigs for assembling V1.8 | V1.8 | 2023-07-13 14:30:27 +0000 |
 | nhchiu | [V0.1 Movable Pulley Z Drive](nhchiu/V0.1_Movable_Pulley_Z) | A movable pulley system on the Z axis with 1:8 total speed ratio... | V0.1 | 2023-07-15 11:51:22 +0000 |
 | nikolasbabetas | [Neopixel Holder](nikolasbabetas/Neopixel_Holder) | A holder to attach Neopixel/WS2812B Led Strips to the V0.1 | V0.1 | 2023-07-15 11:51:22 +0000 |
-| ommy | [roller brackets](ommy/roller_brackets) | Brackets to help rolling V2 on its side. | V2.4 | 2023-07-13 14:30:27 +0000 |
+| ommy | [roller brackets](ommy/roller_brackets) | Brackets to help rolling V2 on its side. | V2.4 | 2023-12-20 16:58:05 +0000 |
 | oxno | [RBP Zero Bracket](oxno/rbp_zero_braket) | Bracket for Raspberry pi zero. | V1.8, V2.4 | 2023-07-13 14:30:27 +0000 |
 | padok | [Chain Anchor - ADXL345 mount Mod](padok/chain_anchor-ADXL345_mount) | A ADXL345 mount for the Afterburner | V2.4 | 2023-07-15 11:51:22 +0000 |
-| piet206 | [V1.8 Z Rails Mod](piet206/V1.8._Z_Rails_Mod) | Add MGN12H linear rails for Z axis motion | V1.8 | 2023-07-13 14:30:27 +0000 |
+| piet206 | [V1.8 Z Rails Mod](piet206/V1.8._Z_Rails_Mod) | Add MGN12H linear rails for Z axis motion | V1.8 | 2023-12-20 16:46:28 +0000 |
 | ponkotsu1 | [V0 Launchpad Skirt](ponkotsu1/V0_Launchpad_Skirt) | Another style V0 skirt | V0 | 2023-12-20 16:49:51 +0000 |
 | prasadp4009 | [StealthBurner CR Touch Mod](prasadp4009/SW_SB_CRTouch) | Voron SW StealthBurner CR Touch Mod | VSW | 2023-07-13 14:30:27 +0000 |
 | quattroerik | [V2.4 Door Hinge M3 3mm 180deg](quattroerik/front_door_m3_180_deg_3mm) | Voron 2.4 door hinges for 3mm panel, 180 deg opening and m3 screw... | V2.4, VT | 2023-07-15 11:51:22 +0000 |
 | randell | [Door Hinges](randell/Door_Hinges) | Door hinges that use an M3 bolt for a pin and bolts thru the panel | V2.4 | 2023-07-15 11:51:22 +0000 |
 |  | [Microswitch Pod for PCB](randell/Microswitch_Endstop) | Modified endstop pod for use of endstop switches mounted on a PCB | V2.4 | 2023-07-15 11:51:22 +0000 |
 | raymondh | [Large Spool Holders](raymondh/LargeSpoolHolders) | Larger spool holders for KVP spools | V1.8, V2.4 | 2023-07-13 14:30:27 +0000 |
-| reQu1em00 | [Kirigami LED Bed Front](reQu1em00/Kirigami_LED_Bed_Front) | Kirigami bed front with space for a single LED or Neopixel button | V0.2 | 2023-07-15 11:51:22 +0000 |
+| reQu1em00 | [Kirigami LED Bed Front](reQu1em00/Kirigami_LED_Bed_Front) | Kirigami bed front with space for a single LED or Neopixel button | V0.2 | 2023-12-20 16:46:28 +0000 |
 | reapola | [MKS CANable Pro DIN Mount](reapola/MKS_CANable_Pro_mount) | MKS CANable Pro mount which mounts on a DIN rail | V0.2, V1.8, V2.4, VSW, VT | 2023-07-15 11:51:22 +0000 |
 | revnull | [Raspberry Pi 7inch Display Mount](revnull/rpi_7in_display_mount) | An articulating mount for the offical Raspberry Pi 7inch touch screen | V2.4 | 2023-07-15 11:51:22 +0000 |
 | richardjm | [ADXL drag chain mount](richardjm/adxl-chain) | Permanent mount for ADXL boards on the back of the motor, replacing... | V2.4 | 2023-07-15 11:51:22 +0000 |
 |  | [Back blanking plate](richardjm/back-plate) | Back blanking plate that can be used instead of the exhaust filter... | V2.4 | 2023-07-13 14:30:27 +0000 |
 |  | [LED 15.5mm quarter round mounts](richardjm/led-mounts) | Mounting corners with integrated cable runs for 15.5mm quarter... | V2.4 | 2023-07-13 14:30:27 +0000 |
 |  | [Picam corner mount](richardjm/picam-corner) | Out of the way corner mounted picam | V2.4 | 2023-07-15 11:51:22 +0000 |
-|  | [Printable snap latches for 2020...](richardjm/snap-latch-2020) | Quick release panel latch inspired by the work of others. | V2.4 | 2023-07-15 11:51:22 +0000 |
+|  | [Printable snap latches for 2020...](richardjm/snap-latch-2020) | Quick release panel latch inspired by the work of others. | V2.4 | 2023-12-20 16:46:28 +0000 |
-| rngSplat | [Printable Switchwire Deck Plate](rngSplat/SW_Deck_Plate) | Print a deck plate for Switchwire with debossed Voron logo | VSW | 2023-07-13 14:30:27 +0000 |
+| rngSplat | [Printable Switchwire Deck Plate](rngSplat/SW_Deck_Plate) | Print a deck plate for Switchwire with debossed Voron logo | VSW | 2023-12-20 16:46:28 +0000 |
-| roboticator24 | [Touchscreen for OctoDash](roboticator24/4inch_touchscreen_mount_for_v2.4) | Mount a 4-inch LCD touchscreen to your V2.4 in place of the usual... | V2.4 | 2023-07-15 11:51:22 +0000 |
+| roboticator24 | [Touchscreen for OctoDash](roboticator24/4inch_touchscreen_mount_for_v2.4) | Mount a 4-inch LCD touchscreen to your V2.4 in place of the usual... | V2.4 | 2023-12-20 16:46:28 +0000 |
 | rsheng118 | [BTT octopus DIN vertical mount](rsheng118/BTT_octopus_DIN_vertical_mount) | DIN vertical mount for Big Tech Tree Octopus board | V2.4 | 2023-07-15 11:51:22 +0000 |
 | ruiqimao | [V0.2 MGN9C X Axis](ruiqimao/V0.2_MGN9C_X) | MGN9C linear rail for the X axis on V0.2 | V0 | 2023-12-20 16:51:59 +0000 |
 | ryandam | [Cable Management Duct](ryandam/Cable_management_duct) | Zip tie mount intergrated cable duct to hide your cable | V0.2 | 2023-07-13 14:30:27 +0000 |
 | sammynorway | [LGX stealthburner connector cover](sammynorway/LGX-stealthburner-connector-cover) | Cable cover for LGX and stealthburner | V1.8, V2.4, VSW, VT | 2023-07-15 11:51:22 +0000 |
 | samwiseg0 | [4 Channel Relay Under Deck Mount](samwiseg0/4channel_relay_under_deck_mount) | Mod to mount a 4 channel GPIO controlled relay | V2.4 | 2023-07-13 14:30:27 +0000 |
@ -369,7 +369,7 @@ contact the admins on Discord to have your mod moved to this folder.
 |  | [Corner Cable Hide/Cover (LED Wires)](samwiseg0/corner_cable_hide) | Mod to hide cables around z idlers | V2.4 | 2023-07-13 14:30:27 +0000 |
 |  | [ESP8266 NodeMCU Din Mount](samwiseg0/esp8266_nodemcu_din_mount) | Din mount for ESP8266 NodeMCU | V2.4, VT | 2023-07-15 11:51:22 +0000 |
 |  | [Extrusion/Chamber Thermistor Mount](samwiseg0/extrusion_thermistor_mount) | Extrusion mount for a NTC100K Thermistor extrusion | V0.2, V1.8, V2.4, VSW, VT | 2023-07-13 14:30:27 +0000 |
-|  | [LRS PSU Screw Terminal Cover](samwiseg0/lrs_screw_terminal_cover) | Mod to cover the screw terminals for several LRS style PSUs | V0.2, V1.8, V2.4, VSW, VT | 2023-07-13 14:30:27 +0000 |
+|  | [LRS PSU Screw Terminal Cover](samwiseg0/lrs_screw_terminal_cover) | Mod to cover the screw terminals for several LRS style PSUs | V0.2, V1.8, V2.4, VSW, VT | 2023-12-20 16:46:12 +0000 |
 |  | [Microfit 2x3 Skirt Connector (ADXL)](samwiseg0/microfit_2x3_skirt_connector_adxl) | Mod for a Microfit 2x3 connector to be mounted in a skirt | V2.4 | 2023-07-15 11:51:22 +0000 |
 |  | [Corsair Flash Voyager GTX Din Mount](samwiseg0/voyager_gtx_din_mount) | Din carrier for a Corsair Flash Voyager GTX | V2.4, VT | 2023-07-15 11:51:22 +0000 |
 | scanlory | [Clip-On Front Door Frame](scanlory/clip_on_door_frame) | Clip-on frame to stiffen and seal front door panels when using... | V2.4 | 2023-07-13 14:30:27 +0000 |
@ -382,15 +382,15 @@ contact the admins on Discord to have your mod moved to this folder.
 | strayr | [Creality toolhead for stealthburner](strayr/stealthburner_creality_toolhead) | Use a creality ender 3 style hotend with stealthburner | V1.8, V2.4, VSW | 2023-07-15 11:51:22 +0000 |
 | sttts | [Waveshare 5.5inch HDMI AMOLED Mount](sttts/Waveshare-5.5-inch-HDMI-AMOLED) | Mod to mount a Waveshare 5.5inch full HD display on a V2 | V2.4, VSW | 2023-07-15 11:51:22 +0000 |
 | tallman5 | [Z Locks](tallman5/z-locks) | Helping hands curing v2.4 build, replaces long zip ties. | V2.4 | 2023-07-15 11:51:22 +0000 |
-| tameike | [Din Rail 2020 Holder](tameike/DIN_Rail_2020_holder) | Attaching DIN Rails to 2020 | V2.4 | 2023-07-13 14:30:27 +0000 |
+| tameike | [Din Rail 2020 Holder](tameike/DIN_Rail_2020_holder) | Attaching DIN Rails to 2020 | V2.4 | 2023-12-20 16:46:28 +0000 |
-|  | [Din Rail SKR 90 deg](tameike/DIN_Rail_SKR_1.3_90deg) | SKR V1.3 bracket turned 90 degrees | V2.4 | 2023-07-13 14:30:27 +0000 |
+|  | [Din Rail SKR 90 deg](tameike/DIN_Rail_SKR_1.3_90deg) | SKR V1.3 bracket turned 90 degrees | V2.4 | 2023-12-20 16:46:28 +0000 |
 |  | [Jetpack V0 base](tameike/Jetpack_V0) | Attach Jetpack to V0 frame | V0.2 | 2023-07-13 14:30:27 +0000 |
 |  | [TacoRaven Mounting Frame](tameike/V0_TR_Mounting_Frame) | TR V0 mount | V0.2 | 2023-07-13 14:30:27 +0000 |
-| tayto-chip | [V2.4 Skirt Switch Mod](tayto-chip/skirt_switch_mod) | Add a ON/OFF Switch to side or front skirts | V2.4 | 2023-07-13 14:30:27 +0000 |
+| tayto-chip | [V2.4 Skirt Switch Mod](tayto-chip/skirt_switch_mod) | Add a ON/OFF Switch to side or front skirts | V2.4 | 2023-12-20 16:46:28 +0000 |
 | teookie | [AB dial indicator mount](teookie/AB_dial_indicator_mount) | Mount for attaching standard dial indicators to AB | V1.8, V2.4, VSW | 2023-07-13 14:30:27 +0000 |
 |  | [SKR Brace](teookie/skr_brace) | Rigidize and stabilize SKR 1.4 mounts | V2.4 | 2023-07-15 11:51:22 +0000 |
 | th0mpy | [BEEFY Din Clips](th0mpy/beefy-din) | Two piece BEEFY Din Clips, holds stronger | V2.4 | 2023-07-15 11:51:22 +0000 |
-| togi | [Exhaust housing side fitting](togi/exhaust_housing_side_fitting) | Moves the exhaust housing bowden fitting 90 degrees to allow the... | V2.4 | 2023-07-13 14:30:27 +0000 |
+| togi | [Exhaust housing side fitting](togi/exhaust_housing_side_fitting) | Moves the exhaust housing bowden fitting 90 degrees to allow the... | V2.4 | 2023-12-20 16:46:28 +0000 |
 | top_gun_de | [mount_for_umbilical](top_gun_de/mount_for_umbilical) | Umbilical guide that goes on the chain anchor | V2.4 | 2023-07-13 14:30:27 +0000 |
 | warriorofwire | [Slenderfan for Afterburner](warriorofwire/slenderfan) | Lighter, quieter, smaller Afterburner | V2.4 | 2023-07-15 11:51:22 +0000 |
 | whoppingpochard | [Extrusion Backers](whoppingpochard/extrusion_backers) | Laser-cut metal pieces to counteract bimetallic frame warping | V2.4 | 2023-07-13 14:30:27 +0000 |
@ -412,13 +412,13 @@ contact the admins on Discord to have your mod moved to this folder.
 |  | [V0 Electronics Cover](xbst_/V0_Electronic_Panel) | A printed cover for v0 electronics. Requires larger printer to print. | V0.2 | 2023-07-13 14:30:27 +0000 |
 |  | [Mobius 4 (M4) V0 Mod](xbst_/V0_M4_Mod) | Mod to mount a M4 extruder to a Voron 0 where pocketwatch extruder... | V0.2 | 2023-07-13 14:30:27 +0000 |
 |  | [V0 PiCam Mount](xbst_/V0_Picam) | A Raspberry Pi Camera Mount For V0 | V0.2 | 2023-07-13 14:30:27 +0000 |
-|  | [Screwed Front Door Hinge](xbst_/V0_Screw_Front_Hinge_Mod) | Mod to screw the front door panel (instead of VHB) | V0.2 | 2023-07-13 14:30:27 +0000 |
+|  | [Screwed Front Door Hinge](xbst_/V0_Screw_Front_Hinge_Mod) | Mod to screw the front door panel (instead of VHB) | V0.2 | 2023-12-20 16:46:28 +0000 |
 |  | [V0 Buttons & OLED Mount](xbst_/V0_Skirt_Buttons) | Mod to mount custom Gcode macro buttons & Waveshare 1.3" OLED display | V0.2 | 2023-07-13 14:30:27 +0000 |
 |  | [V2.4 Fanless Middle Skirt](xbst_/V2.4_Fanless_Middle_Skirt) | A Fanless alternative middle side skirt | V2.4 | 2023-07-13 14:30:27 +0000 |
 |  | [V2.4 Skirt Buttons](xbst_/V2.4_Skirt_Buttons) | Skirt mod for custom Gcode macro buttons | V2.4 | 2023-07-15 11:51:22 +0000 |
 |  | [ZipClip V0](xbst_/ZipClip_v0) | Very simple ziptie mount for v0 1515 extrusions | V0.2 | 2023-07-13 14:30:27 +0000 |
 | xceled | [Single Panel Magnet Mount](xceled/Single_Panel_Magnet_Mount) | Mount your front panel using only magnets | V2.4 | 2023-07-15 11:51:22 +0000 |
-| yenda | [SW More Robust XZ Belt Paths](yenda/vsw_more_robust_belt_paths) | Small mods to belt routing components to ensure a better/more... | VSW | 2023-07-13 14:30:27 +0000 |
+| yenda | [SW More Robust XZ Belt Paths](yenda/vsw_more_robust_belt_paths) | Small mods to belt routing components to ensure a better/more... | VSW | 2023-12-20 16:46:28 +0000 |
 | yeri | [V0 Magnetic Panels](yeri/V0_Magnetic_Panels) | Mount V0 panels with magnets, removes need for hinges and lets you... | V0.2 | 2023-07-13 14:30:27 +0000 |
 |  | [V1 3Z](yeri/V1_3Z) | 3Z mod for V1 | V1.8 | 2023-07-15 11:51:22 +0000 |
 | zruncho | [V0 No-Drop Nuts](zruncho/V0_No_Drop_Nuts) | Voron0 nut inserts which auto-align (LDO frames only) | V0.2 | 2023-07-15 11:51:22 +0000 |
--- a/printer_mods/mods.json
+++ b/printer_mods/mods.json
@ -55,14 +55,6 @@
        "printer_compatibility": "V0.2",
        "last_changed": "2023-07-13 14:30:27 +0000"
    },
    {
        "path": "42bios/LED_mount",
        "title": "LED mount",
        "creator": "42bios",
        "description": "AngryLED - LED-mount for Lumentech LT3 profiles.",
        "printer_compatibility": "V2.4",
        "last_changed": "2023-07-14 13:24:54 +0000"
    },
    {
        "path": "42bios/corner_panel_clip_cable",
        "title": "Corner panel clip w. cable",
@ -93,7 +85,7 @@
        "creator": "Akio",
        "description": "Z belt covers that allow hidden cable routing.",
        "printer_compatibility": "V2.4",
-        "last_changed": "2023-07-14 13:24:54 +0000"
+        "last_changed": "2023-12-20 16:46:12 +0000"
    },
    {
        "path": "AlexanderT-Moss/270-Clamping-Hinges",
@ -125,7 +117,7 @@
        "creator": "Andre",
        "description": "A Revo nozzle box hidden in a Trident skirt.",
        "printer_compatibility": "VT",
-        "last_changed": "2023-07-14 13:24:54 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "Andre/V0_Neopixel_Front_Bed_Mount",
@ -167,14 +159,6 @@
        "printer_compatibility": "V2.4",
        "last_changed": "2023-07-14 13:24:54 +0000"
    },
    {
        "path": "Badnoob/Rail_Alignment",
        "title": "Rail Alignment",
        "creator": "Badnoob",
        "description": "Tools and procedure to properly align the rails in 2.4 and Afterburner",
        "printer_compatibility": "V2.4",
        "last_changed": "2023-07-13 14:30:27 +0000"
    },
    {
        "path": "Baltojikale/LoudOwl_aka_Stabby",
        "title": "LoudOwl aka Stabby",
@ -303,14 +287,6 @@
        "printer_compatibility": "V0.2",
        "last_changed": "2023-07-14 13:24:54 +0000"
    },
    {
        "path": "Chaoticlab/Tool_free_tensioner",
        "title": "Tool_free_tensioner",
        "creator": "Chaoticlab",
        "description": "Tool-free tensioner for Z-Axis",
        "printer_compatibility": "V2.4",
        "last_changed": "2023-07-13 14:30:27 +0000"
    },
    {
        "path": "ChenTheDesignMaker/Z_Belt_Clip",
        "title": "Z Belt Clip",
@ -485,7 +461,7 @@
        "creator": "Ellis",
        "description": "Extrusion mount for badge retractor to keep bowden tube out of the...",
        "printer_compatibility": "V2.4",
-        "last_changed": "2023-07-13 14:30:27 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "Ellis/Bed_Fans",
@ -501,7 +477,7 @@
        "creator": "Ellis",
        "description": "Shorter Z joints for the v2.4",
        "printer_compatibility": "V2.4",
-        "last_changed": "2023-07-13 14:30:27 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "Ellis/Single_MGN9H_Carriage",
@ -581,7 +557,7 @@
        "creator": "FreeformFez",
        "description": "V1.6 Filtered Inlet and Rocker Switch for V1.8",
        "printer_compatibility": "V1.8",
-        "last_changed": "2023-07-14 13:24:54 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "GSL12/pocketwatch_nema17",
@ -605,7 +581,7 @@
        "creator": "GadgetAngel",
        "description": "For any cutting machines or machines that rely on vector graphics...",
        "printer_compatibility": "V0.2, V2.4, VSW, VT",
-        "last_changed": "2023-07-14 13:24:54 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "Galvanic/Bowden_Tube_Guide",
@ -629,7 +605,7 @@
        "creator": "Gizzle",
        "description": "Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics...",
        "printer_compatibility": "VSW",
-        "last_changed": "2023-07-14 13:24:54 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "Hobson318/Belt_Tension_Wrench",
@ -709,7 +685,7 @@
        "creator": "JNP",
        "description": "Door in a frame",
        "printer_compatibility": "V0.2",
-        "last_changed": "2023-07-14 13:24:54 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "JNP/HEPA-Filter",
@ -717,7 +693,7 @@
        "creator": "JNP",
        "description": "Filter case with fan\u00b4s",
        "printer_compatibility": "V0.2",
-        "last_changed": "2023-07-13 14:30:27 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "JNP/Mid-Panel",
@ -733,7 +709,7 @@
        "creator": "JNP",
        "description": "mounting for Neopixel strip with 8 LED\u00b4s",
        "printer_compatibility": "V0.2",
-        "last_changed": "2023-07-14 13:24:54 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "JNP/Side-Panels",
@ -741,7 +717,7 @@
        "creator": "JNP",
        "description": "Panels with intergrated hinge",
        "printer_compatibility": "V0.2",
-        "last_changed": "2023-07-14 13:24:54 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "Jasrags/sw_fee_slot_filament_passthrough",
@ -789,7 +765,7 @@
        "creator": "JosAr",
        "description": "Microswitch based inductive probe replacement",
        "printer_compatibility": "V0.2, V1.8, V2.4, VT",
-        "last_changed": "2023-07-14 13:24:54 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "KenadyDwag44/sw_lightbar",
@ -893,7 +869,7 @@
        "creator": "Kruppes",
        "description": "Print in place tension meter to easily tighten multiple belts to...",
        "printer_compatibility": "V0.2, V1.8, V2.4, VSW",
-        "last_changed": "2023-07-14 13:24:54 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "Kyleisah/CableGator",
@ -973,7 +949,7 @@
        "creator": "LoganFraser",
        "description": "Skirt pieces for Trident, 2.4 and 2.4r2 for combo inlets in 2 sizes.",
        "printer_compatibility": "V2.4, VT",
-        "last_changed": "2023-07-14 13:24:54 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "LoganFraser/HorseshoeSpoolHolder",
@ -1013,7 +989,7 @@
        "creator": "Long",
        "description": "MGN12 Dual 5015 Toolhead for 2.4 & 1.8",
        "printer_compatibility": "V1.8, V2.4",
-        "last_changed": "2023-07-14 13:24:54 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "Lukas/SSD1306_Case_Front_Cover",
@ -1072,12 +1048,20 @@
        "last_changed": "2023-07-13 14:30:27 +0000"
    },
    {
-        "path": "MasturMynd/Stealth_Zero",
+        "path": "MasturMynd/V0.1-Stealth_Zero",
        "title": "Stealth Zero",
        "creator": "MasturMynd",
        "description": "A low poly gantry with front tensioners and optional front mounted...",
-        "printer_compatibility": "V0.2",
+        "printer_compatibility": "V0.1",
-        "last_changed": "2023-07-14 13:24:54 +0000"
+        "last_changed": "2023-12-20 16:56:48 +0000"
    },
    {
        "path": "MasturMynd/V2-2-Piece_Z_Tensioners",
        "title": "2-Piece Z Tensioners",
        "creator": "MasturMynd",
        "description": "Splits the tensioners into two pieces, allowing the tensioner to be...",
        "printer_compatibility": "V2",
        "last_changed": "2023-12-20 16:56:48 +0000"
    },
    {
        "path": "MathematicalPotato/v0.1_belted_z_drive",
@ -1111,21 +1095,13 @@
        "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT",
        "last_changed": "2023-07-14 13:24:54 +0000"
    },
    {
        "path": "Maverick/V0.2_Handles",
        "title": "V0.2 Handles",
        "creator": "Maverick",
        "description": "Add handles to the extrusion tophat",
        "printer_compatibility": "V0.2",
        "last_changed": "2023-07-14 13:24:54 +0000"
    },
    {
        "path": "Maverick/V0.2_Stealth_Skirts",
        "title": "V0.2 Stealth Skirts",
        "creator": "Maverick",
        "description": "Juiced up skirts for the V0.2",
        "printer_compatibility": "V0.2",
-        "last_changed": "2023-07-14 13:24:54 +0000"
+        "last_changed": "2023-12-20 16:46:12 +0000"
    },
    {
        "path": "Mckurt/Switchwire_Y_Belt_Tensioner",
@ -1429,7 +1405,7 @@
        "creator": "Spaghetti-Bolognese",
        "description": "Z drive motor mount bracket mod to improve pulley to belt alignment",
        "printer_compatibility": "V2.4",
-        "last_changed": "2023-07-14 13:24:54 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "StvPtrsn/320mm_Build",
@ -1533,7 +1509,7 @@
        "creator": "Ultrawaffles",
        "description": "A conversion mod for the ender 3 to switchwire. Designed to allow...",
        "printer_compatibility": "VSW",
-        "last_changed": "2023-07-13 14:30:27 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "VinnyCordeiro/RGB_LED_grid_for_SB",
@ -1685,7 +1661,7 @@
        "creator": "alanho",
        "description": "A mount for the BTT PITFT50 v2 Touch Display",
        "printer_compatibility": "V2.4",
-        "last_changed": "2023-07-15 11:51:22 +0000"
+        "last_changed": "2023-12-20 16:46:12 +0000"
    },
    {
        "path": "albert/IKEA_Dioder_Led_Mount",
@ -1693,7 +1669,7 @@
        "creator": "albert",
        "description": "A mount for the IKEA Dioder LED strip",
        "printer_compatibility": "V2.4",
-        "last_changed": "2023-07-13 14:30:27 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "antoinecellerier/ds18b20-sensor-mount",
@ -1781,7 +1757,7 @@
        "creator": "btp",
        "description": "Modified chain mount position to cater for difference with Galileo...",
        "printer_compatibility": "VSW",
-        "last_changed": "2023-07-13 14:30:27 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "buzzdalf/connector_cover",
@ -1997,7 +1973,7 @@
        "creator": "deepfriedheroin",
        "description": "Easy to install Wago mounts for v0 mains",
        "printer_compatibility": "V0.2",
-        "last_changed": "2023-07-15 11:51:22 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "deepfriedheroin/v2_bed_wagos",
@ -2037,7 +2013,7 @@
        "creator": "eddie",
        "description": "Add V1.8 option for 12mm Z rods",
        "printer_compatibility": "V1.8",
-        "last_changed": "2023-07-15 11:51:22 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "edwardyeeks/Tridentified_V2.4_Power_Inlet",
@ -2053,7 +2029,7 @@
        "creator": "elcrni",
        "description": "Internal spool holder for 300 and 350 Tridents. Supports full size...",
        "printer_compatibility": "VT",
-        "last_changed": "2023-07-15 11:51:22 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "elcrni/V2.4-Trident-Spool-Holders",
@ -2111,6 +2087,14 @@
        "printer_compatibility": "V2.4",
        "last_changed": "2023-07-13 14:30:27 +0000"
    },
    {
        "path": "frankaf/mgn12-euclid",
        "title": "Euclid Probe Carriage",
        "creator": "frankaf",
        "description": "A MGN-12 carriage with an inset mount for a Euclid Probe",
        "printer_compatibility": "V1.8, V2.4, VT",
        "last_changed": "2023-12-20 16:26:57 +0000"
    },
    {
        "path": "gamebofh/door-panels",
        "title": "Laser cut door panels",
@ -2197,7 +2181,7 @@
        "creator": "hartk1213",
        "description": "Added a new Power inlet that uses a Fused C14 plug and switch that...",
        "printer_compatibility": "V0.1",
-        "last_changed": "2023-07-15 11:51:22 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "hartk1213/Voron0_ExtendedLegs",
@ -2237,7 +2221,7 @@
        "creator": "hartk1213",
        "description": "Used @Kruppes blank deck panel to add the logo as well as the name...",
        "printer_compatibility": "V0.1",
-        "last_changed": "2023-07-15 11:51:22 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "hartk1213/Voron0_display_dualcolor",
@ -2317,7 +2301,7 @@
        "creator": "hhammarstrand",
        "description": "Connector cover for 42STH20-1004AS",
        "printer_compatibility": "VSW",
-        "last_changed": "2023-07-13 14:30:27 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "hijax_pl/corner_panel_clip",
@ -2375,6 +2359,14 @@
        "printer_compatibility": "V0.2",
        "last_changed": "2023-07-13 14:30:27 +0000"
    },
    {
        "path": "jangrewe/Bitter_USB_Cam",
        "title": "Bitter USB Cam",
        "creator": "jangrewe",
        "description": "Modification of the \"Angry Cam USB v2.0\" webcam mount for 1515...",
        "printer_compatibility": "V0",
        "last_changed": "2023-12-20 16:46:12 +0000"
    },
    {
        "path": "jappaj/FanSaver",
        "title": "V0.1 FanSaver",
@ -2463,14 +2455,6 @@
        "printer_compatibility": "V0.2",
        "last_changed": "2023-07-15 11:51:22 +0000"
    },
    {
        "path": "kageurufu/mgn12-euclid",
        "title": "Euclid Probe Carriage",
        "creator": "kageurufu",
        "description": "A MGN-12 carriage with an inset mount for a Euclid Probe",
        "printer_compatibility": "V1.8, V2.4, VT",
        "last_changed": "2023-07-13 14:30:27 +0000"
    },
    {
        "path": "khay/V2-200_4020_Electronics_Fan",
        "title": "Fan for V2-200mm\u00b2",
@ -2589,7 +2573,7 @@
        "creator": "mosher",
        "description": "Simple mod of print in place door hinges, which uses m3 screws as...",
        "printer_compatibility": "V2.4",
-        "last_changed": "2023-07-13 14:30:27 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "mpfl/V0.1_skirt_OLED",
@ -2637,7 +2621,7 @@
        "creator": "ommy",
        "description": "Brackets to help rolling V2 on its side.",
        "printer_compatibility": "V2.4",
-        "last_changed": "2023-07-13 14:30:27 +0000"
+        "last_changed": "2023-12-20 16:58:05 +0000"
    },
    {
        "path": "oxno/rbp_zero_braket",
@ -2661,7 +2645,15 @@
        "creator": "piet206",
        "description": "Add MGN12H linear rails for Z axis motion",
        "printer_compatibility": "V1.8",
-        "last_changed": "2023-07-13 14:30:27 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "ponkotsu1/V0_Launchpad_Skirt",
        "title": "V0 Launchpad Skirt",
        "creator": "ponkotsu1",
        "description": "Another style V0 skirt",
        "printer_compatibility": "V0",
        "last_changed": "2023-12-20 16:49:51 +0000"
    },
    {
        "path": "prasadp4009/SW_SB_CRTouch",
@ -2709,7 +2701,7 @@
        "creator": "reQu1em00",
        "description": "Kirigami bed front with space for a single LED or Neopixel button",
        "printer_compatibility": "V0.2",
-        "last_changed": "2023-07-15 11:51:22 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "reapola/MKS_CANable_Pro_mount",
@ -2765,7 +2757,7 @@
        "creator": "richardjm",
        "description": "Quick release panel latch inspired by the work of others.",
        "printer_compatibility": "V2.4",
-        "last_changed": "2023-07-15 11:51:22 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "rngSplat/SW_Deck_Plate",
@ -2773,7 +2765,7 @@
        "creator": "rngSplat",
        "description": "Print a deck plate for Switchwire with debossed Voron logo",
        "printer_compatibility": "VSW",
-        "last_changed": "2023-07-13 14:30:27 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "roboticator24/4inch_touchscreen_mount_for_v2.4",
@ -2781,7 +2773,7 @@
        "creator": "roboticator24",
        "description": "Mount a 4-inch LCD touchscreen to your V2.4 in place of the usual...",
        "printer_compatibility": "V2.4",
-        "last_changed": "2023-07-15 11:51:22 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "rsheng118/BTT_octopus_DIN_vertical_mount",
@ -2791,6 +2783,14 @@
        "printer_compatibility": "V2.4",
        "last_changed": "2023-07-15 11:51:22 +0000"
    },
    {
        "path": "ruiqimao/V0.2_MGN9C_X",
        "title": "V0.2 MGN9C X Axis",
        "creator": "ruiqimao",
        "description": "MGN9C linear rail for the X axis on V0.2",
        "printer_compatibility": "V0",
        "last_changed": "2023-12-20 16:51:59 +0000"
    },
    {
        "path": "ryandam/Cable_management_duct",
        "title": "Cable Management Duct",
@ -2853,7 +2853,7 @@
        "creator": "samwiseg0",
        "description": "Mod to cover the screw terminals for several LRS style PSUs",
        "printer_compatibility": "V0.2, V1.8, V2.4, VSW, VT",
-        "last_changed": "2023-07-13 14:30:27 +0000"
+        "last_changed": "2023-12-20 16:46:12 +0000"
    },
    {
        "path": "samwiseg0/microfit_2x3_skirt_connector_adxl",
@ -2957,7 +2957,7 @@
        "creator": "tameike",
        "description": "Attaching DIN Rails to 2020",
        "printer_compatibility": "V2.4",
-        "last_changed": "2023-07-13 14:30:27 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "tameike/DIN_Rail_SKR_1.3_90deg",
@ -2965,7 +2965,7 @@
        "creator": "tameike",
        "description": "SKR V1.3 bracket turned 90 degrees",
        "printer_compatibility": "V2.4",
-        "last_changed": "2023-07-13 14:30:27 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "tameike/Jetpack_V0",
@ -2989,7 +2989,7 @@
        "creator": "tayto-chip",
        "description": "Add a ON/OFF Switch to side or front skirts",
        "printer_compatibility": "V2.4",
-        "last_changed": "2023-07-13 14:30:27 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "teookie/AB_dial_indicator_mount",
@ -3021,7 +3021,7 @@
        "creator": "togi",
        "description": "Moves the exhaust housing bowden fitting 90 degrees to allow the...",
        "printer_compatibility": "V2.4",
-        "last_changed": "2023-07-13 14:30:27 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "top_gun_de/mount_for_umbilical",
@ -3197,7 +3197,7 @@
        "creator": "xbst_",
        "description": "Mod to screw the front door panel (instead of VHB)",
        "printer_compatibility": "V0.2",
-        "last_changed": "2023-07-13 14:30:27 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "xbst_/V0_Skirt_Buttons",
@ -3245,7 +3245,7 @@
        "creator": "yenda",
        "description": "Small mods to belt routing components to ensure a better/more...",
        "printer_compatibility": "VSW",
-        "last_changed": "2023-07-13 14:30:27 +0000"
+        "last_changed": "2023-12-20 16:46:28 +0000"
    },
    {
        "path": "yeri/V0_Magnetic_Panels",