From 7fa947cb1f18569d684fe69df3d63538169e00db Mon Sep 17 00:00:00 2001 From: edwardyeeks <55744473+edwardyeeks@users.noreply.github.com> Date: Thu, 10 Dec 2020 06:48:06 +1100 Subject: [PATCH] Update purge bucket mod macros (#189) --- .../Images/db.png | Bin .../Macros/nozzle_scrub.cfg | 18 +++++++++--------- .../README.md | 2 +- 3 files changed, 10 insertions(+), 10 deletions(-) mode change 100644 => 100755 printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber/Images/db.png diff --git a/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber/Images/db.png b/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber/Images/db.png old mode 100644 new mode 100755 diff --git a/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber/Macros/nozzle_scrub.cfg b/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber/Macros/nozzle_scrub.cfg index ea4b7956b..4b995a533 100644 --- a/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber/Macros/nozzle_scrub.cfg +++ b/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber/Macros/nozzle_scrub.cfg @@ -74,7 +74,10 @@ variable_wipe_spd_xy: 5000 ; Nozzle wipe speed in mm/min. #variable_brush_start: 50 ## For V2.4 350mm build, uncomment this below: -#variable_brush_start: 75 +#variable_brush_start: 75 + +# This value is defaulted from brush location in CAD (rear left). Change if your brush width is different. +variable_brush_width: 52 ## These are only used if location_bucket_rear is False. You specify a custom location in y axis for your brush - see diagram above. ## variable_brush_front: 0 @@ -106,7 +109,11 @@ variable_brush_depth: 0 #variable_bucket_left_width: 67 ## For V2.4 350mm build, uncomment below -#variable_bucket_left_width: 92 +#variable_bucket_left_width: 92 + +# These values are defaulted from bucket geometry in CAD (rear left location). Change only if you're using a custom bucket. +variable_bucket_right_width: 40 +variable_bucket_gap: 22 # For V1.8, you may need to measure where your bucket start is and input into bucket_start. Otherwise, a value of 0 is for a default # installation of purge bucket at rear left. @@ -124,13 +131,6 @@ variable_bucket_start: 0 # Placeholder. The variable will contain at random a number representing the left or right bucket. variable_bucket_pos: 1 -# This value is defaulted from brush location in CAD (rear left). Refer to diagram for visual reference. -variable_brush_width: 52 - -# These values are defaulted from bucket geometry in CAD (rear left location). Refer to diagram for visual reference. -variable_bucket_right_width: 40 -variable_bucket_gap: 22 - gcode: # First, check if the axes are homed. {% if "xyz" in printer.toolhead.homed_axes %} diff --git a/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber/README.md b/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber/README.md index fa21532ac..327d84eef 100644 --- a/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber/README.md +++ b/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber/README.md @@ -48,7 +48,7 @@ You will be able to find these older revisions under [Legacy_Revisions](./Legacy ![Revision_Comparisons](./Images/rev2_rev3_comparison.png) -In Rev1+2, the brush holder was available as two options: a regular holder and one with fully printed sheet indexing stops. In Rev3, the brush holder became only available as a sheet stop option with M2X10 BCHS self tapping screws. Purge buckets were compatible across Rev1+2 and Rev3. +In Rev1+2, the brush holder was available as two options: a regular holder and one with fully printed sheet indexing stops. In Rev3, the brush holder became only available as a printed sheet stop option with M2X10 BCHS self tapping screws. Purge buckets were compatible across Rev1+2 and Rev3. ## REV4 (LATEST)